Rejestracja

Tłumaczymy nasz sklep na język polski!

Wymaga to jednak czasu, ponieważ w ofercie mamy dużo artykułów, a na nasz sklep składa się wiele stron. Chwilowo nasz katalog produktów dostępny będzie w języku angielskim. Dziękujemy za cierpliwość!
Warunki filtrowania

Wyczyść wszystko

  • Stan magazynowy
  • Allowable Load P2(N)
  • Height H2 at Allowable Load(mm)
  • Free Height Hf(mm)
    [15–250/1mm jedn.]
  • Coil O.D. OD(mm)
  • Coil I.D. ID(mm)
  • Spring Constant k(N/mm)
  • Properties / applications
  • Environmentally Friendly
  • CAD
  • Compression Springs

    Compression springs are parts that use the reaction force of spring for objectives such as receiving mechanical movements or absorbing shocks or loads. They are used in many tools and products such as machine tools. Since compression springs are used for many applications, models of various sizes and materials are available. When selecting a model, factors such as the operating environment, load capacity and spring constant should be considered. Spring sizes are usually expressed in terms of the coil outer diameter, coil inner diameter and free height. There are compression spring models with outer diameters of 0.6 to 147 mm, and inner diameters of 0.4 to 115 mm. Free height is the height of spring without pressure applied. The length or height of spring with pressure applied is called the solid length or solid height. Springs are made of many different materials, such as stainless steel, piano wire, oil tempered wire, titanium alloy and steel. The material affects spring properties such as load capacity.
    • UltraSpring Compression Coil Springs
      • ZNIŻKA
      • Volume Discount
      • Stock

      ACCURATE

      UltraSpring Compression Coil Springs

      UltraSpring control loading at two-points: Load @ Standard Height and Load @ Allowable Height (= height @ compressed length). Therefore, UltraSpring maintain their load characteristics closer to their calculated life based on these general allowable maximum deflections.[Accurate Quality Control]All UltraSpring products manufactured by Accurate Inc. have lot numbers and full traceability.
      Czytaj dalej
      MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
      Stainless Steel Wire / Piano Wire / Oil Tempered WireUp to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or MoreWith Grinding / Without Grinding0.21 ~ 2750.770.78 ~ 538.051 ~ 10150.6 ~ 1350.4 ~ 1150.029 ~ 737.627
      Cena (bez VAT) od:
      0.67 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Round Wire Coil Springs / Deflection 45% / O.D. Referenced
      • ZNIŻKA
      • Volume Discount
      • Order quantities extended (D-JIT)
      • Stock

      MISUMI

      Round Wire Coil Springs / Deflection 45% / O.D. Referenced

      MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
      Stainless Steel WireUp to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00With Grinding / Without Grinding0.15 ~ 35.31.25 ~ 445 ~ 802 ~ 20-0.05 ~ 0.98
      Cena (bez VAT) od:
      1.15 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Round Wire Coil Springs / Deflection 40%-60% / Configurable / O.D. Referenced

        MISUMI

        Round Wire Coil Springs / Deflection 40%-60% / Configurable / O.D. Referenced

        MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
        Stainless Steel Wire / Piano Wire-With Grinding / Without Grinding--15 ~ 2505 ~ 27--
        Standardowa data wysyłki:
        7 dni robocze
        Konfiguruj
      • Round Wire Coil Springs / Deflection 60%-75% / O.D. Referenced
        • ZNIŻKA
        • Volume Discount

        MISUMI

        Round Wire Coil Springs / Deflection 60%-75% / O.D. Referenced

        MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
        Piano WireUp to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00Without Grinding0.38 ~ 23.51.25 ~ 365 ~ 903 ~ 272.3 ~ 24.40.1 ~ 0.5
        Cena (bez VAT) od:
        0.70 €
        Cena specjalna
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Niektóre pozycje mogą zostać wysłane tego samego dnia
        Konfiguruj
      • Compression Spring
        • ZNIŻKA
        • Volume Discount
        • Stock

        SAMINI

        Compression Spring

        [Materials]SUS304-WPB SWP-A [Max. Load] 0.81–114.6 N [O.D.] 1.7–100φ [Free Length] 5–400 mm
        Czytaj dalej
        MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
        Stainless Steel Wire / Piano WireUp to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or MoreWith Grinding / Without Grinding0.81 ~ 7220-5 ~ 4001.7 ~ 100-0.05 ~ 239
        Cena (bez VAT) od:
        2.49 €
        Cena specjalna
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Niektóre pozycje mogą zostać wysłane tego samego dnia
        Konfiguruj
      • Round Wire Coil Springs / Deflection 40% / O.D. Referenced
        • ZNIŻKA
        • Volume Discount
        • Order quantities extended (D-JIT)
        • Stock

        MISUMI

        Round Wire Coil Springs / Deflection 40% / O.D. Referenced

        MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
        Stainless Steel WireUp to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00With Grinding / Without Grinding0.98 ~ 125.53 ~ 485 ~ 802 ~ 20-0.5 ~ 3.9
        Cena (bez VAT) od:
        1.64 €
        Cena specjalna
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Niektóre pozycje mogą zostać wysłane tego samego dnia
        Konfiguruj
      • DS Series, Compression Coil Spring
        • ZNIŻKA
        • Volume Discount

        KS SANGYO

        DS Series, Compression Coil Spring【1 do 20 szt.】

        Meets standard dimensions for the D series (compliant with DIN 2098).Cylinder type compression coil spring whose material was changed to stainless steel wire for spring.
        Czytaj dalej
        MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
        Stainless Steel Wire4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or MoreWith Grinding4.7 ~ 707.13.4 ~ 253.74.4 ~ 4903 ~ 68-0.116 ~ 97.857
        Cena (bez VAT) od:
        14.32 €
        Cena specjalna
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Niektóre pozycje mogą zostać wysłane tego samego dnia
        Konfiguruj
      • Round Wire Coil Springs / Deflection 45% / I.D. Referenced
        • ZNIŻKA
        • Volume Discount
        • Order quantities extended (D-JIT)
        • Stock

        MISUMI

        Round Wire Coil Springs / Deflection 45% / I.D. Referenced

        MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
        Stainless Steel Wire1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00With Grinding / Without Grinding2.65 ~ 102.96 ~ 6515 ~ 1006.25 ~ 20.855 ~ 160.29 ~ 2.94
        Cena (bez VAT) od:
        2.77 €
        Cena specjalna
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Niektóre pozycje mogą zostać wysłane tego samego dnia
        Konfiguruj
      • Round Wire Coil Springs / Deflection 40%-45% / O.D. Referenced
        • ZNIŻKA
        • Volume Discount

        MISUMI

        Round Wire Coil Springs / Deflection 40%-45% / O.D. Referenced

        MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
        Piano WireUp to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00With Grinding / Without Grinding0.98 ~ 117.72.75 ~ 605 ~ 1002 ~ 271.4 ~ 23.60.5 ~ 2.9
        Cena (bez VAT) od:
        0.68 €
        Cena specjalna
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Niektóre pozycje mogą zostać wysłane tego samego dnia
        Konfiguruj
      • Round Wire Coil Springs / Deflection 25%-30% / O.D. Referenced
        • ZNIŻKA
        • Volume Discount

        MISUMI

        Round Wire Coil Springs / Deflection 25%-30% / O.D. Referenced

        MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
        Piano Wire4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or MoreWith Grinding / Without Grinding4.9 ~ 735.53.5 ~ 765 ~ 1003 ~ 271.7 ~ 21.42.9 ~ 29.4
        Cena (bez VAT) od:
        0.78 €
        Cena specjalna
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Niektóre pozycje mogą zostać wysłane tego samego dnia
        Konfiguruj
      • Round Wire Coil Springs / Deflection 27%-30% / O.D. Referenced
        • ZNIŻKA
        • Volume Discount
        • Order quantities extended (D-JIT)
        • Stock

        MISUMI

        Round Wire Coil Springs / Deflection 27%-30% / O.D. Referenced

        MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
        Stainless Steel Wire1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00With Grinding / Without Grinding3.4 ~ 3533.25 ~ 605 ~ 804 ~ 20-2 ~ 14.7
        Cena (bez VAT) od:
        1.82 €
        Cena specjalna
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Niektóre pozycje mogą zostać wysłane tego samego dnia
        Konfiguruj
      • Compression Coil Spring, SWP-A/SUS304WP-B
        • ZNIŻKA
        • Volume Discount
        • Stock

        SHOWA SPRING

        Compression Coil Spring, SWP-A/SUS304WP-B【1 do 20 szt.】

        A standardized spring made of general cold-formed piano wire or stainless steel wire.
        Czytaj dalej
        MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
        Stainless Steel Wire / Piano Wire1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or MoreWith Grinding / Without Grinding2.33 ~ 1558.56-7 ~ 3004.5 ~ 80-0.107 ~ 86.891
        Cena (bez VAT) od:
        3.12 €
        Cena specjalna
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Niektóre pozycje mogą zostać wysłane tego samego dnia
        Konfiguruj
      • D Series  Compression Coil Spring (DIN 2098 Standard)
        • ZNIŻKA
        • Volume Discount
        • Stock

        KS SANGYO

        D Series Compression Coil Spring (DIN 2098 Standard)【1 do 20 szt.】

        Cylindrical compression coil spring following the DIN 2098 standard, popular in Germany.
        Czytaj dalej
        MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
        Stainless Steel Wire / Piano Wire / Oil Tempered WireUp to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or MoreWith Grinding / Without Grinding0.181 ~ 4111.5910.8 ~ 258.31 ~ 4900.6 ~ 86.3-0.0294 ~ 232.26
        Cena (bez VAT) od:
        14.32 €
        Cena specjalna
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Niektóre pozycje mogą zostać wysłane tego samego dnia
        Konfiguruj
      • Flat Wire Coil Springs / Deflection 65% / O.D. Referenced
        • ZNIŻKA
        • Volume Discount
        • Order quantities extended (D-JIT)

        MISUMI

        Flat Wire Coil Springs / Deflection 65% / O.D. Referenced

        MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
        Oil Tempered Wire16.01 to 30.00 / 30.01 to 50.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00-29.4 ~ 392.37 ~ 10520 ~ 30011 ~ 427 ~ 310.45 ~ 12.07
        Cena (bez VAT) od:
        2.06 €
        Cena specjalna
        Standardowa data wysyłki:
        Wycena
        Konfiguruj
      • Heat Resistant Spring
        • Volume Discount

        SAMINI

        Heat Resistant Spring

        - Made of Inconel X-750, delivering high performance under environments that require heat resistance.- Recommended operating temperature: Up to 450℃.
        Czytaj dalej
        MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
        Inconel4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00With Grinding / Without Grinding5.39 ~ 117.7-10 ~ 606 ~ 30-0.56 ~ 8.04
        Cena (bez VAT) od:
        27.50 €
        Standardowa data wysyłki:
        6 dni robocze
        Konfiguruj
      • Round Wire Compression Coil Spring J Spring JA
        • ZNIŻKA
        • Volume Discount

        TOKYO HATSUJYO MANUFACTURING

        Round Wire Compression Coil Spring J Spring JA【10 do 20 szt.】

        A round wire coil made of stainless steel wire (SUS304-WPB).
        Czytaj dalej
        MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
        Stainless Steel WireUp to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00---5 ~ 502 ~ 141.48 ~ 120.07 ~ 4.71
        Cena (bez VAT) od:
        15.47 €
        Cena specjalna
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Niektóre pozycje mogą zostać wysłane tego samego dnia
        Konfiguruj
      • Round Wire Coil Springs / Deflection 35%-40% / O.D. Referenced
        • ZNIŻKA
        • Volume Discount

        MISUMI

        Round Wire Coil Springs / Deflection 35%-40% / O.D. Referenced

        MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
        Piano Wire1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00With Grinding / Without Grinding2.9 ~ 171.63 ~ 655 ~ 1003 ~ 271.9 ~ 22.81.5 ~ 4.9
        Cena (bez VAT) od:
        0.70 €
        Cena specjalna
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Niektóre pozycje mogą zostać wysłane tego samego dnia
        Konfiguruj
      • [Clean & Pack]Round Wire Coil Springs - I.D. Referenced
        • Volume Discount

        MISUMI

        [Clean & Pack]Round Wire Coil Springs - I.D. Referenced

        Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products ·Degreasing (Anti-rust single packing)     : Part Number SL-□□ ·Precision cleaning (Degassing double packing)     : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Possible applications SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal Dust removal Clean environment (Class 10 to 1,000*) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal Dust removal Outgas reduction Vacuum environment Clean environment (Class 10 to 1,000*) Pre-semiconductor process Liquid crystal deposition process Pre-OLED process *US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.The series is standardized to maintain the spring constant uniformly to the same diameter.
        Czytaj dalej
        MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
        Stainless Steel WireUp to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00-0.74 ~ 294.3-10 ~ 1003.46 ~ 22.4-0.098 ~ 9.81
        Cena (bez VAT) od:
        4.99 €
        Standardowa data wysyłki:
        7 dni robocze
        Konfiguruj
      • Strong Spring TF (Light Small Load)
        • ZNIŻKA
        • Volume Discount

        TOKYO HATSUJYO MANUFACTURING

        Strong Spring TF (Light Small Load)

        Spring with modified cross-sectioned materials. Compared to round wire coil springs, can handle a high load in a small space.
        Czytaj dalej
        MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
        Oil Tempered Wire73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More-78.5 ~ 4000-10 ~ 5008 ~ 704 ~ 38.51.91 ~ 94.07
        Cena (bez VAT) od:
        1.71 €
        Cena specjalna
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Niektóre pozycje mogą zostać wysłane tego samego dnia
        Konfiguruj
      • Flat Wire Coil Springs / Deflection 60% / O.D. Referenced
        • ZNIŻKA
        • Order quantities extended (D-JIT)

        MISUMI

        Flat Wire Coil Springs / Deflection 60% / O.D. Referenced

        MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
        Oil Tempered Wire50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More-68.6 ~ 588.46 ~ 12015 ~ 30010.5 ~ 436 ~ 311.09 ~ 19.61
        Cena (bez VAT) od:
        1.34 €
        Cena specjalna
        Standardowa data wysyłki:
        Wycena
        Konfiguruj
      • K Series  Compression Coil Spring (Japan Spring Manufactures Association Standard)
        • ZNIŻKA
        • Volume Discount

        KS SANGYO

        K Series Compression Coil Spring (Japan Spring Manufactures Association Standard)【1 do 20 szt.】

        Spring compliant with Japan Spring Manufactures Association Standard (JSMA No.7-cylinder type compression coil spring).
        Czytaj dalej
        MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
        Stainless Steel WireUp to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00With Grinding / Without Grinding0.62 ~ 327.321.92 ~ 57.54 ~ 1262 ~ 36-0.059 ~ 42.532
        Cena (bez VAT) od:
        14.32 €
        Cena specjalna
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Niektóre pozycje mogą zostać wysłane tego samego dnia
        Konfiguruj
      • Compression springs ISO 10243, light load (26000)

          NORELEM

          Compression springs ISO 10243, light load (26000)

          · Permit high alternating and permanent loads· Can be used at operating temperatures of up to 230°· Additionally heat-treated· Long life expectancy
          Czytaj dalej
          MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
          Steel Wire----25 ~ 30510 ~ 255 ~ 12.5-
          Cena (bez VAT) od:
          3.46 €
          Standardowa data wysyłki:
          4 dni robocze
          Konfiguruj
        • Strong Spring TM (Middle Load)
          • ZNIŻKA
          • Volume Discount

          TOKYO HATSUJYO MANUFACTURING

          Strong Spring TM (Middle Load)

          Spring with modified cross-sectional materials. Higher loads in small spaces compared to round-wire coil springs.
          Czytaj dalej
          MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
          Oil Tempered Wire107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More-137.3 ~ 8500-10 ~ 3508 ~ 704 ~ 38.55.32 ~ 367.48
          Cena (bez VAT) od:
          1.29 €
          Cena specjalna
          Standardowa data wysyłki:
          Towar dostępny w magazynie: 1 dzień roboczy
          Niektóre pozycje mogą zostać wysłane tego samego dnia
          Konfiguruj
        • Washers for Coil Springs / Tapped

            MISUMI

            Washers for Coil Springs / Tapped

            MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
            ---------
            Standardowa data wysyłki:
            7 dni robocze
            Konfiguruj
          • Washers for Coil Springs / Flanged
            • Order quantities extended (D-JIT)

            MISUMI

            Washers for Coil Springs / Flanged

            MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
            ---------
            Standardowa data wysyłki:
            7 dni robocze
            Konfiguruj
          • Strong Spring TL (Light Load)
            • ZNIŻKA
            • Volume Discount

            TOKYO HATSUJYO MANUFACTURING

            Strong Spring TL (Light Load)

            Spring with modified cross-sectioned materials. Compared to round wire coil springs, can handle a high load in a small space.
            Czytaj dalej
            MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
            Oil Tempered Wire73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More-98.1 ~ 6100-10 ~ 5008 ~ 704 ~ 38.53.07 ~ 198.61
            Cena (bez VAT) od:
            1.43 €
            Cena specjalna
            Standardowa data wysyłki:
            Towar dostępny w magazynie: 1 dzień roboczy
            Niektóre pozycje mogą zostać wysłane tego samego dnia
            Konfiguruj
          • Strong Spring TH (Heavy Load)
            • ZNIŻKA
            • Volume Discount

            TOKYO HATSUJYO MANUFACTURING

            Strong Spring TH (Heavy Load)

            Spring with modified cross-sectioned materials. Compared to round wire coil springs, can handle a high load in a small space.
            Czytaj dalej
            MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
            Oil Tempered Wire150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More-206 ~ 13000-10 ~ 3508 ~ 704 ~ 38.510.78 ~ 736.11
            Cena (bez VAT) od:
            1.49 €
            Cena specjalna
            Standardowa data wysyłki:
            Towar dostępny w magazynie: 1 dzień roboczy
            Niektóre pozycje mogą zostać wysłane tego samego dnia
            Konfiguruj
          • Round Wire Coil Springs / Deflection 15%-25% / O.D. Referenced
            • ZNIŻKA
            • Volume Discount
            • Stock

            MISUMI

            Round Wire Coil Springs / Deflection 15%-25% / O.D. Referenced

            MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
            Stainless Steel Wire4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00With Grinding / Without Grinding6.1 ~ 3533.75 ~ 645 ~ 804 ~ 20-4.9 ~ 29.4
            Cena (bez VAT) od:
            2.47 €
            Cena specjalna
            Standardowa data wysyłki:
            Towar dostępny w magazynie: 1 dzień roboczy
            Niektóre pozycje mogą zostać wysłane tego samego dnia
            Konfiguruj
          • Flat Wire Coil Springs / Deflection 32%-40% / O.D. Referenced
            • Volume Discount

            MISUMI

            Flat Wire Coil Springs / Deflection 32%-40% / O.D. Referenced

            MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
            Oil Tempered Wire73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More-78 ~ 8246 ~ 12010 ~ 2006 ~ 253 ~ 12.53.1 ~ 82.4
            Cena (bez VAT) od:
            0.92 €
            Standardowa data wysyłki:
            Towar dostępny w magazynie: 1 dzień roboczy
            Niektóre pozycje mogą zostać wysłane tego samego dnia
            Konfiguruj
          • Flat Wire Coil Springs / Deflection 19%-24% / O.D. Referenced
            • ZNIŻKA

            MISUMI

            Flat Wire Coil Springs / Deflection 19%-24% / O.D. Referenced

            MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
            Oil Tempered Wire107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More-137 ~ 18337.6 ~ 13310 ~ 1756 ~ 253 ~ 12.59.5 ~ 306
            Cena (bez VAT) od:
            0.92 €
            Cena specjalna
            Standardowa data wysyłki:
            Towar dostępny w magazynie: 1 dzień roboczy
            Niektóre pozycje mogą zostać wysłane tego samego dnia
            Konfiguruj
          • Mold Spring SF (Light Small Load)
            • ZNIŻKA
            • Volume Discount

            SAMSOL

            Mold Spring SF (Light Small Load)

            From Korea’s number one spring manufacturer. High quality, low cost, off-the-shelf
            Czytaj dalej
            MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
            Steel73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More---10 ~ 5008 ~ 704 ~ 38.51.666 ~ 112.014
            Cena (bez VAT) od:
            0.93 €
            Cena specjalna
            Standardowa data wysyłki:
            Towar dostępny w magazynie: 1 dzień roboczy
            Niektóre pozycje mogą zostać wysłane tego samego dnia
            Konfiguruj
          • [Clean & Pack]Round Wire Coil Springs - O.D. Referenced Stainless Steel, UL/UTT
            • Volume Discount

            MISUMI

            [Clean & Pack]Round Wire Coil Springs - O.D. Referenced Stainless Steel, UL/UTT

            Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.■Part Number for Clean & Pack Products ·Degreasing (Anti-rust single packing)     : Part Number SL-□□ ·Precision cleaning (Degassing double packing)     : Part Number SH-□□ ·Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□ Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Possible applications SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process Post battery assembly process SH-□□ Precision cleaning Degassing double packing Oil removal Dust removal Clean environment (Class 10 to 1,000*) Battery assembly process LCD-related post assembly process In-vehicle camera assembly process SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal Dust removal Outgas reduction Vacuum environment Clean environment (Class 10 to 1,000*) Pre-semiconductor process Liquid crystal deposition process Pre-OLED process *US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.■NotesCleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.Please be careful about the application location and storage environment.The series is standardized to maintain the spring constant uniformly to the same diameter.SL-UL / SH-UL/ SHD-UL / SL-UTT / SH-UTT / SHD-UTT Type···Allowable Max. Deflection 40%
            Czytaj dalej
            MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
            Stainless Steel WireUp to 1.50 / 1.51 to 4.50 / 4.51 to 8.50 / 8.51 to 16.00 / 16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00-0.98 ~ 125.5-5 ~ 802 ~ 20-0.5 ~ 3.9
            Standardowa data wysyłki:
            Wycena
            Konfiguruj
          • Titanium Compression Spring

              SAMINI

              Titanium Compression Spring

              Lightweight (a specific gravity of 4.67, half that of steel) and highly corrosion resistant (superior to stainless steel).
              Czytaj dalej
              MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
              Titanium Alloy30.01 to 50.00 / 50.01 to 73.00-49 ~ 56-15 ~ 2512-4.1 ~ 9
              Cena (bez VAT) od:
              38.97 €
              Standardowa data wysyłki:
              6 dni robocze
              Konfiguruj
            • Polycarbonate Plastic Spring
              • Volume Discount

              SUNCO

              Polycarbonate Plastic Spring

              [Internal diameter] 4, 6[Outer diameter] 8, 10[Custom length] 20[Solid length] 12.5, 11.0[Spring constant] 1.14, 0.43
              Czytaj dalej
              MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
              ---------
              Cena (bez VAT) od:
              6.46 €
              Standardowa data wysyłki:
              7 dni robocze
              Konfiguruj
            • Flat Spring
              • Volume Discount

              SAMINI

              Flat Spring

              Flat wire coil spring. [Features]· Convenient identification display for handling.* May not correspond to thin wire diameters. [Applications]· Optimal for springs for industrial machinery, press molds and plastic molds. [Materials]· Silicon chrome steel wire (SWOSC equivalent)[Winding direction]· Right[Type]· Yellow - For extra light loads· Blue - For light loads· Red - For medium loads· Green - For heavy loads· Brown - For extra heavy loads
              Czytaj dalej
              MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
              Oil Tempered Wire73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More-88 ~ 1536210 ~ 24020 ~ 30010 ~ 705 ~ 38.52.8 ~ 853
              Cena (bez VAT) od:
              1.67 €
              Standardowa data wysyłki:
              6 dni robocze
              Konfiguruj
            • Strong Spring TB (Extra Heavy Load)
              • ZNIŻKA
              • Volume Discount

              TOKYO HATSUJYO MANUFACTURING

              Strong Spring TB (Extra Heavy Load)

              Spring with a modified cross-section wire. High load is obtained in a small space compared to round wire coil springs.
              Czytaj dalej
              MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
              Oil Tempered Wire230.01 to 580.00 / 580.01 or More-343 ~ 18000-10 ~ 3508 ~ 704 ~ 38.520.76 ~ 1285.71
              Cena (bez VAT) od:
              2.05 €
              Cena specjalna
              Standardowa data wysyłki:
              Towar dostępny w magazynie: 1 dzień roboczy
              Niektóre pozycje mogą zostać wysłane tego samego dnia
              Konfiguruj
            • Compression springs ISO 10243, moderate load (26001)

                NORELEM

                Compression springs ISO 10243, moderate load (26001)

                · Permit high alternating and permanent loads· Can be used at operating temperatures of up to 230°· Additionally heat-treated· Long life expectancy
                Czytaj dalej
                MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
                Steel Wire----25 ~ 30510 ~ 255 ~ 12.5-
                Cena (bez VAT) od:
                3.46 €
                Standardowa data wysyłki:
                4 dni robocze
                Konfiguruj
              • Flat Wire Coil Springs / Deflection 40% / O.D. Referenced
                • ZNIŻKA
                • Volume Discount
                • Order quantities extended (D-JIT)

                MISUMI

                Flat Wire Coil Springs / Deflection 40% / O.D. Referenced

                MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
                Oil Tempered Wire73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More-87.2 ~ 157012 ~ 18020 ~ 30010.5 ~ 525.5 ~ 372.73 ~ 65.42
                Cena (bez VAT) od:
                1.38 €
                Cena specjalna
                Standardowa data wysyłki:
                Wycena
                Konfiguruj
              • Flat Wire Coil Springs / Deflection 40%-50% / O.D. Referenced
                • ZNIŻKA

                MISUMI

                Flat Wire Coil Springs / Deflection 40%-50% / O.D. Referenced

                MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
                Oil Tempered Wire50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More-59 ~ 39205 ~ 25010 ~ 5006 ~ 703 ~ 38.52 ~ 112
                Cena (bez VAT) od:
                0.90 €
                Cena specjalna
                Standardowa data wysyłki:
                Towar dostępny w magazynie: 1 dzień roboczy
                Niektóre pozycje mogą zostać wysłane tego samego dnia
                Konfiguruj
              • Flat Wire Coil Springs / Deflection 16%-20% / O.D. Referenced
                • ZNIŻKA
                • Volume Discount

                MISUMI

                Flat Wire Coil Springs / Deflection 16%-20% / O.D. Referenced

                MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
                Oil Tempered Wire150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More-177 ~ 24038 ~ 14010 ~ 1756 ~ 253 ~ 12.514.8 ~ 481
                Cena (bez VAT) od:
                1.20 €
                Cena specjalna
                Standardowa data wysyłki:
                Towar dostępny w magazynie: 1 dzień roboczy
                Niektóre pozycje mogą zostać wysłane tego samego dnia
                Konfiguruj
              • Mold Spring SL (Light Load)
                • ZNIŻKA
                • Volume Discount

                SAMSOL

                Mold Spring SL (Light Load)

                Korea's premier spring manufacturer. High quality, low cost, immediate delivery
                Czytaj dalej
                MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
                Steel73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More---10 ~ 5008 ~ 704 ~ 38.52.744 ~ 213.542
                Cena (bez VAT) od:
                0.93 €
                Cena specjalna
                Standardowa data wysyłki:
                Towar dostępny w magazynie: 1 dzień roboczy
                Niektóre pozycje mogą zostać wysłane tego samego dnia
                Konfiguruj
              • DANLY Spring Series (Deformed Wire)
                • ZNIŻKA
                • Volume Discount

                DANLY

                DANLY Spring Series (Deformed Wire)

                DANLY Spring Series· 11 Light Load Series· 21 Medium Load Series· 26 Heavy Load Series· 36 Ultra Heavy Load Series
                Czytaj dalej
                MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
                Oil Tempered Wire16.01 to 30.00 / 30.01 to 50.00 / 50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More-150,50 ~ 9265.36.2 ~ 12225 ~ 30510 ~ 635 ~ 382.4 ~ 10000
                Cena (bez VAT) od:
                5.03 €
                Cena specjalna
                Standardowa data wysyłki:
                Towar dostępny w magazynie: 1 dzień roboczy
                Niektóre pozycje mogą zostać wysłane tego samego dnia
                Konfiguruj
              • Compression springs ISO 10243, very heavy load (26003)

                  NORELEM

                  Compression springs ISO 10243, very heavy load (26003)

                  · Permit high alternating and permanent loads · Can be used at operating temperatures of up to 230°· Additionally heat-treated · Long life expectancy
                  Czytaj dalej
                  MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
                  Steel Wire----25 ~ 30510 ~ 255 ~ 12.5-
                  Cena (bez VAT) od:
                  4.08 €
                  Standardowa data wysyłki:
                  4 dni robocze
                  Konfiguruj
                • Flat Wire Coil Springs / Deflection 25%-32% / O.D. Referenced
                  • ZNIŻKA
                  • Volume Discount

                  MISUMI

                  Flat Wire Coil Springs / Deflection 25%-32% / O.D. Referenced

                  MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
                  Oil Tempered Wire73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More-98 ~ 12256.8 ~ 11910 ~ 1756 ~ 253 ~ 12.55.1 ~ 153
                  Cena (bez VAT) od:
                  0.77 €
                  Cena specjalna
                  Standardowa data wysyłki:
                  Towar dostępny w magazynie: 1 dzień roboczy
                  Niektóre pozycje mogą zostać wysłane tego samego dnia
                  Konfiguruj
                • Mold Spring SU (Ultra High Deflection)
                  • ZNIŻKA
                  • Volume Discount

                  SAMSOL

                  Mold Spring SU (Ultra High Deflection)

                  It is spring manufacturer that represents Korea. High quality, low cost, immediate delivery
                  Czytaj dalej
                  MaterialAllowable Load (Configurable Range)(N)End Surface StatusAllowable Load P2(N)Height H2 at Allowable Load(mm)Free Height Hf(mm)Coil O.D. OD(mm)Coil I.D. ID(mm)Spring Constant k(N/mm)
                  Steel50.01 to 73.00 / 73.01 to 107.00 / 107.01 to 150.00 / 150.01 to 230.00 / 230.01 to 580.00 / 580.01 or More---15 ~ 30010.5 ~ 436 ~ 311.078 ~ 19.208
                  Cena (bez VAT) od:
                  1.32 €
                  Cena specjalna
                  Standardowa data wysyłki:
                  Towar dostępny w magazynie: 1 dzień roboczy
                  Niektóre pozycje mogą zostać wysłane tego samego dnia
                  Konfiguruj