Conveyer Rollers（Bearing：Double）

Data to be displayed: 30; 45; 60

Sort by:

?* Information on days to ship and prices

Miniature Rollers for Conveyors

MISUMI

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	11.06 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Conveyer Rollers - With Pressed Bearings and Extended Inner Race

MISUMI

2D / 3D CAD data available

Select to compare

Configure now
Min. Shipping Days ：	6 Days

Promotional pricing ends 30/11/2024

Conveyor Roller (for Light Loads) SERIES FF1

FUJI SEISAKUSHO

[Features]
Achieves smooth rotation along with miniaturization / weight reduction and low noise, while also featuring shock resistance in addition to chemical resistance, corrosion resistance and elasticity.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	7.96 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

Conveyer Roller Shafts / Hollow

MISUMI

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	10.76 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Blank steel cylinder conveyor rollers (S55)

BS ROLLEN

Idlers transport a wide variety of goods on roller conveyors, containers, workpiece carriers, boxes, cartons, but also mesh pallets and pallets. Carrying rollers steel tube bright - Carrying roller bearing made of galvanised sheet steel with deep groove ball bearing. Higher load capacity than plastic idlers, for sharp-edged goods to be conveyed, containers with steel runners or for loading by crane or forklift.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	29.12 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Blank steel cylinder conveyor rollers (S60)

BS ROLLEN

Idlers transport a wide variety of goods on roller conveyors, containers, workpiece carriers, boxes, cartons, but also mesh boxes and pallets. Carrying rollers steel tube bright - Carrying roller bearing made of galvanised sheet steel with deep groove ball bearing. Higher load capacity than plastic idlers, for sharp-edged goods to be conveyed, containers with steel runners or for loading by crane or forklift.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	37.14 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Steel Roller (Roller for Conveyor); M Series (R-3816), Diameter φ 38.1 × Roller Width 100 - 1000

MAKITECH

Moderate to light load φ38 / thickness t1.6 steel roller with enhanced shock resistance and strength. Roller unit of the R-3816 roller conveyor. The widths can be specified in 1 mm increments from 100 to 1000 mm.

[Features]
· The roller diameter is φ38.1. The thickness is t1.6. The shock resistance is improved. The minimum roller interval is P50.
· Standard roller width (nominal) is 100W to 1000W in 50mm increments.
· Can be manufactured to desired size.
· Machined bearings, high quality.
· Model 60 frame standard type

2D CAD data available

Select to compare

Configure now
Min. Shipping Days ：	10 Days

Conveyor Rollers / Plastic

MISUMI

2D / 3D CAD data available

Select to compare

Configure now
Min. Shipping Days ：	7 Days

Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀25.4 × Width 90 - 490 (KR Type)

OKURA YUSOKI

[Features]
• Best suited for transport of lightweight, small items.
• Transport lengths and roller width can be specified within the range of 90 - 490 mm.

Select to compare

Configure now
Starting from^∗ ：	8.20 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Stainless Steel Roller, M Series (RS-1912), Diameter φ 19 × Width 100 - 500

MAKITECH

A small-diameter ⌀ 19-mm stainless steel roller. Suitable for transporting small objects. A single roller unit for the RS-1912 roller conveyor. The widths of the roller can be specified in 1-mm increments from 100–500 mm.

[Features]
· The roller diameter is ⌀ 19.0 mm. The minimum roller interval is P25.
· The standard roller width (nominal) is 100–500 mm in increments of 50 mm.
· This roller can also be manufactured in non-standard sizes.

Select to compare

Configure now
Min. Shipping Days ：	9 Days

Steel roller (conveyor roller) M Series (standard bearing) diameter φ 57.2 x width 100-1000

MAKITECH

φ 57 mm, T2.6 roller which employs a standard bearing for quiet operation and high durability. Roller unit of the R-5721NB roller conveyor.

[Features]
· Easy to install thanks to the bearing and resin integrated boss.
· Silent type.
· High durability thanks to standard bearing.

2D CAD data available

Select to compare

Configure now
Min. Shipping Days ：	10 Days

Single Unit Stainless Steel Roller (Roller for Conveyor) Diameter ⌀25.4 × Width 90 - 490 (KS Type)

OKURA YUSOKI

Best suited for transport of lightweight, small items. Transport distance and roller width can be specified within the range of 90 - 490 mm.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	22.14 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Steel Roller, S Series (S-2512P), Diameter φ25.4 × Width 90 - 490

MAKITECH

Small diameter of 25 mm. Roller unit parts for S-2512P, suitable for small item transport.

[Features]
· Small diameter: 25 mm.
· Individual roller for S-2512P, suitable for small item transport.

2D CAD data available

Select to compare

Configure now
Min. Shipping Days ：	10 Days

Steel Roller M Series (R-2212P), Diameter φ 22.2 x Width 90 - 490

MAKITECH

Small-diameter φ22 steel roller. Roller unit parts for R-2212P roller conveyor, suitable for small item transport. Widths can be specified in 1 mm increments from 50 to 500 mm.

[Features]
• Roller diameter is φ22.2. Minimum roller spacing is P25.
• Standard roller width (nominal) is 100W to 500W at intervals of 50mm.
• Configurable size is available.
• Pressed-in bearing and inexpensive type.
• Model 60 frame standard type

2D CAD data available

Select to compare

Configure now
Min. Shipping Days ：	10 Days

Conveyor Roller (for Medium / Heavy　Load) SERIES FF7

FUJI SEISAKUSHO

[Features]
- Multipurpose roller with superior shock resistance and quiet performance.
- Housing employs polycarbonate, which confers excellent shock resistance.
- Multipurpose roller which can be used in a wide variety of different fields.
- Both press bearings (steel, stainless steel) and precision bearings (6002ZZ) are available for the bearing element.
- Additionally, either hardened polyvinyl chloride (PVC) or steel (ST) can be used for the tube material, depending on the application.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	59.04 €
Min. Shipping Days ：	13 Days

*Unit price with basic configuration

Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀76.3 × Width 150 - 1190 (NHR Type)

OKURA YUSOKI

Roller diameter ⌀76.3 is the largest for steel rollers. For heavy objects measured in units of tons. Transport distance and roller width can be specified within the range of 150 - 1190 mm.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	41.88 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Conveyor Roller (for Medium / Heavy　Load) SERIES FF3

FUJI SEISAKUSHO

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	66.92 €
Min. Shipping Days ：	13 Days

*Unit price with basic configuration

Blue plastic cylinder conveyor rollers (S20)

BS ROLLEN

Idlers transport a wide variety of goods on roller conveyors, containers, workpiece carriers, boxes, cartons, but also mesh boxes and pallets. Idler bearings made of thermoplastic material with a row of steel balls - gentle on the goods to be transported and smooth-running.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	17.30 €
Min. Shipping Days ：	2 Days

*Unit price with basic configuration

Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀18.1 × Width 100 - 500 (EAR Type)

OKURA YUSOKI

Optimal for small item transport. Transport distance and roller width can be specified within the range of 100 - 500 mm.

Select to compare

Configure now
Starting from^∗ ：	17.26 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Aluminum Roller Unit (Roller For Conveyor), Resin Bearing Type, Diameter ø42 × Width 240-490 (ZAR Type)

OKURA YUSOKI

[Features]
· Low noise type with resin bearings.
· Conveyor length and roller width within the range of 240 to 490 mm can be specified.

Select to compare

Configure now
Starting from^∗ ：	16.17 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀57 × Width 90 - 990 (SR Type)

OKURA YUSOKI

[Features]
• Medium load ⌀57 steel roller.
• Transport length and roller width can be specified within the range of 90 - 990 mm.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	11.83 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Steel Roller Starter, High Strength Type, Diameter ø60.5 × Width 90 to 990 (MMR Type)

OKURA YUSOKI

Shock-resistant. Improved strength compared to the MR type. Transport distance and roller width can be specified within the range of 90 – 990 mm.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	23.40 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Single Unit Stainless Steel Roller (Roller for Conveyor), Diameter ⌀42.7 × Width 90 - 690 (PS Type)

OKURA YUSOKI

Roller diameter of ⌀42.7 for use with moderate loads. Transport distance and roller width can be specified within the range of 90 - 690 mm.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	79.35 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Roller single body FMC57R without shaft for load in the roller conveyor

MEIKIKOU

*Sold as a roller unit.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	20.06 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Blue plastic cylinder conveyor rollers (S40)

BS ROLLEN

Idlers transport a wide variety of goods, containers, workpiece carriers, boxes, cartons, as well as wire mesh boxes and pallets on roller conveyors. Idler bearings made of thermoplastic material with a row of steel balls - gentle on the goods to be transported and smooth-running.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	19.40 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

Blank steel cylinder conveyor rollers (S80)

BS ROLLEN

Idlers transport a wide variety of goods on roller conveyors, containers, workpiece carriers, boxes, cartons, but also mesh pallets and pallets. Carrying rollers steel tube bright - Carrying roller bearing made of galvanised sheet steel with deep groove ball bearing. Higher load capacity than plastic idlers, for sharp-edged goods, containers with steel runners or for loading by crane or forklift.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	31.68 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀42 × Width 240 - 490 (AR Type)

OKURA YUSOKI

Light and clean. Transport distance and roller width can be specified within the range of 240 - 490 mm.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	15.08 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Steel Tapered Roller Starter, Diameter ø42.7 (R500) × Width 305 to 690 (CTR Type)

OKURA YUSOKI

Compact design with a frame internal radius of 500 mm. Transport distance and roller width can be specified within the range of 305 - 690 mm.

Select to compare

Configure now
Starting from^∗ ：	81.15 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Steel Tapered Roller Starter, Diameter ø42.7 (R900) × Width 305 to 690 (NTR Type)

OKURA YUSOKI

Dedicated tapered roller for curves. The inside frame radius is 900 mm. Transport distance and roller width can be specified within the range of 305 - 690 mm.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	60.33 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Single Unit Steel Tapered Roller (Roller for Conveyor), Diameter ⌀57 (R900) × Width 305 - 790 (TTR Type)

OKURA YUSOKI

Durable type dedicated tapered roller for curves. The inside frame radius is 900 mm. Transport distance and roller width can be specified within the range of 305-790 mm.

Select to compare

Configure now
Starting from^∗ ：	86.96 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀19.1 × Width 90 - 490 (ER Type)

OKURA YUSOKI

Smallest available steel roller. Optimal for small item transport. Transport distance and roller width can be specified within the range of 90 - 490 mm.

Select to compare

Configure now
Starting from^∗ ：	16.25 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀32 × Width 90 - 620 (FR Type)

OKURA YUSOKI

More economical than KR when work dimensions are 150 mm or less. Transport distance and roller width can be specified within the range of 90 - 620 mm.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	8.20 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Single Unit Steel Roller (Roller for Conveyor) Diameter ⌀38 × Width 90 - 690 (QR Type)

OKURA YUSOKI

Stronger version of type FR. Transport distance and roller width can be specified within the range of 90 - 690 mm.

Select to compare

Configure now
Starting from^∗ ：	9.65 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀42.7 × Width 90 - 790 (PR Model)

OKURA YUSOKI

Medium load ⌀42.7 steel roller. Transport distance and roller width can be specified within the range of 90 - 790 mm.

Select to compare

Configure now
Starting from^∗ ：	11.10 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀48.6 × Width 90 - 790 (LR Type)

OKURA YUSOKI

Medium load ⌀48.6 steel roller. Transport distance and roller width can be specified within the range of 90 - 790 mm.

Select to compare

Configure now
Starting from^∗ ：	12.73 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Single Unit Steel Roller (Roller for Conveyor) High Strength, Roller Diameter ⌀57 × Width 90 - 990 (SSR Type)

OKURA YUSOKI

Shock-resistant type which improves upon the strength of the SR type. Transport distance and roller width can be specified within the range of 90 – 990 mm.

Select to compare

Configure now
Starting from^∗ ：	15.44 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀60.5 × Width 90 - 990 (MR Type)

OKURA YUSOKI

Heavy duty steel roller. Transport distance and roller width can be specified within the range of 90 - 990 mm.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.22 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Single Unit Stainless Steel Roller (Roller for Conveyor), Diameter ⌀18 × Width 90 - 390 (ES Type)

OKURA YUSOKI

Stainless steel roller with minimum roller diameter of ⌀18. Optimal for transport of ultra-small materials. Transport distance and roller width can be specified within the range of 90 - 390 mm.

Select to compare

Configure now
Starting from^∗ ：	21.91 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Single Unit Stainless Steel Roller (Roller for Conveyor) Diameter ⌀38.1 × Width 90 - 690 (QS Type)

OKURA YUSOKI

Stronger version of KS. Transport distance and roller width can be specified within the range of 90-690 mm.

Select to compare

Configure now
Starting from^∗ ：	31.37 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Resin Roller Conveyor, Diameter ø30 (Stainless Steel Shaft) × Width 90-390 (BFS Type)

OKURA YUSOKI

[Features]
· Light load conveyor incorporating ø30 resin roller in stainless steel frame. Conveyor length and roller width within the range of 90 to 390 mm can be specified.

Select to compare

Configure now
Starting from^∗ ：	21.06 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Individual Plastic Roller (Conveyor Roller), Diameter ⌀40 (Stainless Steel Shaft) × Width 90 - 490 (BPS Type)

OKURA YUSOKI

[Features]
• ⌀40 resin rollers for loads.
• Stainless steel shaft type.
• Transport distance and roller width can be specified within the range of 90 - 490 mm.

Select to compare

Configure now
Starting from^∗ ：	32.63 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Single Unit Plastic Roller (Roller for Conveyor), Diameter ⌀50 × Width 90 - 620 (BBR Type)

OKURA YUSOKI

⌀50 resin roller for light loads. Transport distance and roller width can be specified within the range of 90 - 620 mm.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	30.64 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Single Unit Plastic Roller (Conveyor Roller), Diameter ⌀50 (Stainless Steel Shaft) × Width 90 - 620 (BLS Type)

OKURA YUSOKI

⌀50 resin roller for light loads. Stainless steel shaft type. Transport distance and roller width can be specified within the range of 90 - 620 mm.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	30.64 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Stainless Steel Roller, M Series (RS-3810), Diameter φ 38.1 × Width 100 - 600

MAKITECH

A general purpose ⌀ 38-mm stainless steel roller. A cost-effective RS-3810 roller conveyor roller unit manufactured entirely from stainless steel.

[Features]
· The roller diameter is ⌀ 38.1 mm. The minimum roller interval is P50.
· The standard roller width (nominal) is 100–600 mm in increments of 50 mm.

Select to compare

Configure now
Min. Shipping Days ：	9 Days

Roller Single Unit FMC57R without Shaft, For Light Loads, Roller Conveyor

MEIKIKOU

*Sold as a roller unit.

[Features]
· A versatile standard type suitable for transporting products with soft bases, such as cardboard cases

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.43 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days
Type
Long Roller Type
Short Roller Type
Shaft Type
Bearing
Roller Material
O.D. D(Ø)
Width W(mm)
Properties
Lining
Lining Material
Lining Hardness(Shore A)
Lining Color
Surface Treatment
Bearing Material
Drive

	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	MISUMI	MISUMI	FUJI SEISAKUSHO	MISUMI	BS ROLLEN	BS ROLLEN	MAKITECH	MISUMI	OKURA YUSOKI	MAKITECH	MAKITECH	OKURA YUSOKI	MAKITECH	MAKITECH	FUJI SEISAKUSHO	OKURA YUSOKI	FUJI SEISAKUSHO	BS ROLLEN	OKURA YUSOKI	OKURA YUSOKI	OKURA YUSOKI	OKURA YUSOKI	OKURA YUSOKI	MEIKIKOU	BS ROLLEN	BS ROLLEN	OKURA YUSOKI	OKURA YUSOKI	OKURA YUSOKI	OKURA YUSOKI	OKURA YUSOKI	OKURA YUSOKI	OKURA YUSOKI	OKURA YUSOKI	OKURA YUSOKI	OKURA YUSOKI	OKURA YUSOKI	OKURA YUSOKI	OKURA YUSOKI	OKURA YUSOKI	OKURA YUSOKI	OKURA YUSOKI	OKURA YUSOKI	MAKITECH	MEIKIKOU
Product Series	Miniature Rollers for Conveyors	Conveyer Rollers - With Pressed Bearings and Extended Inner Race	Conveyor Roller (for Light Loads) SERIES FF1	Conveyer Roller Shafts / Hollow	Blank steel cylinder conveyor rollers (S55)	Blank steel cylinder conveyor rollers (S60)	Steel Roller (Roller for Conveyor); M Series (R-3816), Diameter φ 38.1 × Roller Width 100 - 1000	Conveyor Rollers / Plastic	Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀25.4 × Width 90 - 490 (KR Type)	Stainless Steel Roller, M Series (RS-1912), Diameter φ 19 × Width 100 - 500	Steel roller (conveyor roller) M Series (standard bearing) diameter φ 57.2 x width 100-1000	Single Unit Stainless Steel Roller (Roller for Conveyor) Diameter ⌀25.4 × Width 90 - 490 (KS Type)	Steel Roller, S Series (S-2512P), Diameter φ25.4 × Width 90 - 490	Steel Roller M Series (R-2212P), Diameter φ 22.2 x Width 90 - 490	Conveyor Roller (for Medium / Heavy　Load) SERIES FF7	Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀76.3 × Width 150 - 1190 (NHR Type)	Conveyor Roller (for Medium / Heavy　Load) SERIES FF3	Blue plastic cylinder conveyor rollers (S20)	Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀18.1 × Width 100 - 500 (EAR Type)	Aluminum Roller Unit (Roller For Conveyor), Resin Bearing Type, Diameter ø42 × Width 240-490 (ZAR Type)	Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀57 × Width 90 - 990 (SR Type)	Steel Roller Starter, High Strength Type, Diameter ø60.5 × Width 90 to 990 (MMR Type)	Single Unit Stainless Steel Roller (Roller for Conveyor), Diameter ⌀42.7 × Width 90 - 690 (PS Type)	Roller single body FMC57R without shaft for load in the roller conveyor	Blue plastic cylinder conveyor rollers (S40)	Blank steel cylinder conveyor rollers (S80)	Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀42 × Width 240 - 490 (AR Type)	Steel Tapered Roller Starter, Diameter ø42.7 (R500) × Width 305 to 690 (CTR Type)	Steel Tapered Roller Starter, Diameter ø42.7 (R900) × Width 305 to 690 (NTR Type)	Single Unit Steel Tapered Roller (Roller for Conveyor), Diameter ⌀57 (R900) × Width 305 - 790 (TTR Type)	Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀19.1 × Width 90 - 490 (ER Type)	Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀32 × Width 90 - 620 (FR Type)	Single Unit Steel Roller (Roller for Conveyor) Diameter ⌀38 × Width 90 - 690 (QR Type)	Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀42.7 × Width 90 - 790 (PR Model)	Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀48.6 × Width 90 - 790 (LR Type)	Single Unit Steel Roller (Roller for Conveyor) High Strength, Roller Diameter ⌀57 × Width 90 - 990 (SSR Type)	Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀60.5 × Width 90 - 990 (MR Type)	Single Unit Stainless Steel Roller (Roller for Conveyor), Diameter ⌀18 × Width 90 - 390 (ES Type)	Single Unit Stainless Steel Roller (Roller for Conveyor) Diameter ⌀38.1 × Width 90 - 690 (QS Type)	Resin Roller Conveyor, Diameter ø30 (Stainless Steel Shaft) × Width 90-390 (BFS Type)	Individual Plastic Roller (Conveyor Roller), Diameter ⌀40 (Stainless Steel Shaft) × Width 90 - 490 (BPS Type)	Single Unit Plastic Roller (Roller for Conveyor), Diameter ⌀50 × Width 90 - 620 (BBR Type)	Single Unit Plastic Roller (Conveyor Roller), Diameter ⌀50 (Stainless Steel Shaft) × Width 90 - 620 (BLS Type)	Stainless Steel Roller, M Series (RS-3810), Diameter φ 38.1 × Width 100 - 600	Roller Single Unit FMC57R without Shaft, For Light Loads, Roller Conveyor
CAD	2D / 3D	2D / 3D		2D / 3D	2D / 3D	2D / 3D	2D	2D / 3D			2D		2D	2D				2D / 3D							2D / 3D	2D / 3D
Starting from^∗	11.06 € *Unit price with basic configuration Volume Discount	-	7.96 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	10.76 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	29.12 € *Unit price with basic configuration	37.14 € *Unit price with basic configuration	-	-	8.20 € *Unit price with basic configuration	-	-	22.14 € *Unit price with basic configuration Volume Discount	-	-	59.04 € *Unit price with basic configuration Volume Discount	41.88 € *Unit price with basic configuration Volume Discount	66.92 € *Unit price with basic configuration Volume Discount	17.30 € *Unit price with basic configuration	17.26 € *Unit price with basic configuration	16.17 € *Unit price with basic configuration	11.83 € *Unit price with basic configuration Volume Discount	23.40 € *Unit price with basic configuration Volume Discount	79.35 € *Unit price with basic configuration Volume Discount	20.06 € *Unit price with basic configuration Volume Discount	19.40 € *Unit price with basic configuration	31.68 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024	15.08 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	81.15 € *Unit price with basic configuration	60.33 € *Unit price with basic configuration Volume Discount	86.96 € *Unit price with basic configuration	16.25 € *Unit price with basic configuration	8.20 € *Unit price with basic configuration Volume Discount	9.65 € *Unit price with basic configuration	11.10 € *Unit price with basic configuration	12.73 € *Unit price with basic configuration	15.44 € *Unit price with basic configuration	16.22 € *Unit price with basic configuration Volume Discount	21.91 € *Unit price with basic configuration	31.37 € *Unit price with basic configuration	21.06 € *Unit price with basic configuration	32.63 € *Unit price with basic configuration	30.64 € *Unit price with basic configuration Volume Discount	30.64 € *Unit price with basic configuration Volume Discount	-	16.43 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	Same day	6 Days	Same day	Same day	Same day	3 Days	10 Days	7 Days	8 Days	9 Days	10 Days	8 Days	10 Days	10 Days	13 Days	7 Days	13 Days	2 Days	6 Days	6 Days	5 Days	6 Days	6 Days	12 Days	3 Days	Same day	Same day	8 Days	8 Days	8 Days	8 Days	8 Days	5 Days	8 Days	8 Days	8 Days	8 Days	8 Days	8 Days	8 Days	8 Days	8 Days	6 Days	9 Days	6 Days
Type	Long Rollers	Long Rollers	Long Rollers	Long Rollers	-	-	Long Rollers	Long Rollers	Long Rollers	Long Rollers	Long Rollers	Long Rollers	Long Rollers	Long Rollers	Long Rollers	Long Rollers	Long Rollers	-	Long Rollers	Long Rollers	Long Rollers	Long Rollers	Long Rollers	Long Rollers	-	-	Long Rollers	Long Rollers	Long Rollers	Long Rollers	Long Rollers	Long Rollers	Long Rollers	Long Rollers	Long Rollers	Long Rollers	Long Rollers	Long Rollers	Long Rollers	Long Rollers	Long Rollers	Long Rollers	Long Rollers	Long Rollers	Long Rollers
Long Roller Type	Straight	Straight	Straight	Straight	-	-	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	-	Straight	Straight	Straight	Straight	Straight	Straight	-	-	Straight	Tapered	Tapered	Tapered	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight
Short Roller Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Shaft Type	Shafts	Shafts	No Shaft (Round Bore)	Shafts	Both Ends Threaded / Others	Both Ends Threaded	No Shaft (Round Bore) / Shafts	Shafts	No Shaft (Round Bore) / Shafts	No Shaft (Round Bore) / Shafts	No Shaft (Round Bore) / Shafts	No Shaft (Round Bore) / Shafts	No Shaft (Round Bore) / Shafts	No Shaft (Round Bore) / Shafts	No Shaft (Round Bore)	No Shaft (Round Bore) / Shafts	No Shaft (Round Bore)	Others	Shafts	No Shaft (Round Bore) / Shafts	No Shaft (Round Bore) / Shafts	No Shaft (Round Bore) / Shafts	Shafts	No Shaft (Round Bore)	Others	Both Ends Threaded	No Shaft (Round Bore) / Shafts	Shafts	Shafts	Shafts	Shafts	No Shaft (Round Bore) / Shafts	No Shaft (Round Bore) / Shafts	No Shaft (Round Bore) / Shafts	No Shaft (Round Bore) / Shafts	No Shaft (Round Bore) / Shafts	No Shaft (Round Bore) / Shafts	No Shaft (Round Bore) / Shafts	No Shaft (Round Bore) / Shafts	No Shaft (Round Bore) / Shafts	Shafts	No Shaft (Round Bore) / Shafts	No Shaft (Round Bore) / Shafts	No Shaft (Round Bore) / Shafts	No Shaft (Round Bore)
Bearing	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double
Roller Material	Steel	Steel / Stainless Steel / Aluminum	Resin	Steel	Steel	Steel	Steel	Resin	Steel	Stainless Steel	Steel	Stainless Steel	Steel	Steel	Resin	Steel	Resin	Resin	Aluminum	Aluminum	Steel	Steel	Stainless Steel	Steel	Resin	Steel	Aluminum	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Stainless Steel	Stainless Steel	Resin	Resin	Resin	Resin	Stainless Steel	Steel
O.D. D(Ø)	20	19 ～ 57.2	18 ～ 57	19.1 ～ 57.2	50	60	38.1	20 ～ 50	25.4	19	57.2	25.4	25.4	22.2	50 ～ 57	76.3	50 ～ 57	20	18.1	42	57	60.5	42.7	57	40	80	42	42.7	42.7	57	19.1	32	38	42.7	48.6	57	60.5	18	38.1	30	40	50	50	38.1	38
Width W(mm)	50 ～ 100	-	100 ～ 600	100 ～ 506	-	-	100 ～ 1000	-	90 ～ 490	100 ～ 500	100 ～ 1000	90 ～ 490	90 ～ 490	50 ～ 500	100 ～ 700	150 ～ 1190	100 ～ 700	-	400	305 ～ 490	90 ～ 990	90 ～ 990	620 ～ 690	100 ～ 850	-	-	240 ～ 490	490	390 ～ 690	390	150 ～ 490	90 ～ 620	90 ～ 690	90 ～ 790	150 ～ 690	150 ～ 620	90 ～ 990	90 ～ 305	90 ～ 690	150 ～ 390	305 ～ 490	90 ～ 620	90 ～ 620	100 ～ 600	100 ～ 800
Properties	-	-	Standard / Chemical Resistance	-	-	-	Standard	-	Standard	Water Resistance	Standard	Water Resistance	Standard	Standard	Standard / Low Noise Characteristics	Standard	Standard / Water Resistance	-	Water Resistance	Water Resistance	Standard	Standard	Water Resistance	Standard	-	-	Water Resistance	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	-	Standard
Lining	Not Provided	-	-	Not Provided	-	-	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	-	Not Provided	-	-	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	-	-	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided
Lining Material	-	Urethane Rubber	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Lining Hardness(Shore A)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Lining Color	-	Natural Color	-	-	Natural Color	Natural Color	-	-	-	-	-	-	-	-	-	-	-	Blue	-	-	-	-	-	-	Blue	Natural Color	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Surface Treatment	Chromate	Not Provided / Clear Anodized Aluminum / Hard Chrome Plating / Chromate	Not Provided	-	Zinc Plating	Zinc Plating	Zinc Plating	Not Provided	Not Provided	Not Provided	Zinc Plating	Not Provided	Zinc Plating	Zinc Plating	Not Provided	Not Provided	Not Provided	-	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Bright Chrome Plating	-	Zinc Plating	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Bright Chrome Plating
Bearing Material	-	-	Steel / Stainless Steel	-	-	-	Steel	-	Steel	Stainless Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	-	Steel	Resin	Steel	Steel	Steel	Steel	-	-	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Steel	Resin	Resin	Resin	Resin	Stainless Steel	Steel
Drive	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Filter by:

Stock

- Show only stock items
Clear

Type
- Long Rollers
- Short Rollers
- Shaft for Roller
Clear

Long Roller Type
- Straight
- Tapered
Clear

Short Roller Type
- Straight
Clear

Shaft Type
- No Shaft (Round Bore)
- Shafts
- Both Ends Threaded
- Others
Clear

Bearing
- Not Provided
- Single
- Double
Clear

Roller Material
- Steel
- Stainless Steel
- Aluminum
- Resin
- Rubber
Clear

O.D. D(Ø)
12

18

18.1

19

19.1

20

22.2

25.4

28.6

30

32

38

38.1

40

42

42.7

48.6

50

50.8

57

57.1

57.2

60

60.5

63

76.3

80

85

114.3

139.8

165.2
Drawing

Clear

Width W(mm)
15

25

50

65.5

90

100

102

103

106

150

152

153

156

200

202

203

206

240

250

252

253

256

298

300

302

303

305

306

330

340

350

388

390

400

402

403

406

450

488

490

500

502

503

506

550

598

600

620

650

690

700

750

790

800

850

890

900

950

990

1000

1090

1190

1300

1530

1730
[100-600/50mm Unit(s)][50-99/1mm Unit(s)][101-199/1mm Unit(s)][201-299/1mm Unit(s)][301-399/1mm Unit(s)][401-499/1mm Unit(s)][501-599/1mm Unit(s)][601-699/1mm Unit(s)][701-799/1mm Unit(s)][801-899/1mm Unit(s)][901-999/1mm Unit(s)]
Drawing

Clear

Properties
- Standard
- Abrasion Resistance
- Water Resistance
- Chemical Resistance
- Low Noise Characteristics
Clear

Lining
- Not Provided
- Entire Surface
Clear

Lining Material
- Urethane Rubber
Clear

Lining Hardness(Shore A)
90
Clear

Lining Color
- Natural Color
- Blue
- Gray
Clear

Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- Clear Anodized Aluminum
- Bright Chrome Plating
- Hard Chrome Plating
- Chromate
- Zinc Plating
- Hot Zinc Plating
Clear