Rejestracja
Warunki filtrowania

Wyczyść wszystko

  • Stan magazynowy
  • Long Roller Type
  • Short Roller Type
  • O.D. D(Ø)
  • Width W(mm)
    [100–600/50mm jedn.]
    [50–99/1mm jedn.]
    [101–199/1mm jedn.]
    [201–299/1mm jedn.]
    [301–399/1mm jedn.]
    [401–499/1mm jedn.]
    [501–599/1mm jedn.]
    [601–699/1mm jedn.]
    [701–799/1mm jedn.]
    [801–899/1mm jedn.]
    [901–999/1mm jedn.]
  • CAD
  • Conveyer Rollers

      • Miniature Rollers for Conveyors
        • Volume Discount

        MISUMI

        Miniature Rollers for Conveyors

        TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
        Long RollersStraight-ShaftsSingle / DoubleSteel / Stainless Steel2015 ~ 100-
        Cena standardowa (bez VAT):
        7.12 €
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Niektóre pozycje mogą zostać wysłane tego samego dnia
        Konfiguruj
      • Conveyer Rollers - With Pressed Bearings and Extended Inner Race

          MISUMI

          Conveyer Rollers - With Pressed Bearings and Extended Inner Race

          TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
          Long RollersStraight-ShaftsDoubleSteel / Stainless Steel / Aluminum19 ~ 57.2--
          Standardowa data wysyłki:
          6 dni robocze
          Konfiguruj
        • Blank steel cylinder conveyor rollers (S55)

            BS ROLLEN

            Blank steel cylinder conveyor rollers (S55)

            Idlers transport a wide variety of goods on roller conveyors, containers, workpiece carriers, boxes, cartons, but also mesh pallets and pallets. Carrying rollers steel tube bright - Carrying roller bearing made of galvanised sheet steel with deep groove ball bearing. Higher load capacity than plastic idlers, for sharp-edged goods to be conveyed, containers with steel runners or for loading by crane or forklift.
            Czytaj dalej
            TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
            ---Both Ends Threaded / OthersDoubleSteel50--
            Cena standardowa (bez VAT):
            29.12 €
            Standardowa data wysyłki:
            Towar dostępny w magazynie: 1 dzień roboczy
            Niektóre pozycje mogą zostać wysłane tego samego dnia
            Konfiguruj
          • Conveyor Components, Free Roller
            • Volume Discount

            ITOUDENKI

            Conveyor Components, Free Roller

            [Features] For light duty (30 kg or less). [Material] JIS-STKM (pipe steel).
            Czytaj dalej
            TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
            Long RollersStraight-ShaftsNot Provided-38 ~ 60200 ~ 1000Standard / Abrasion Resistance
            Cena standardowa (bez VAT):
            40.38 €
            Standardowa data wysyłki:
            6 dni robocze
            Konfiguruj
          • Conveyor Rollers / Plastic

              MISUMI

              Conveyor Rollers / Plastic

              TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
              Long RollersStraight-ShaftsDoubleResin20 ~ 50--
              Standardowa data wysyłki:
              7 dni robocze
              Konfiguruj
            • Conveyer Roller Shafts

                MISUMI

                Conveyer Roller Shafts

                TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                Shaft for Roller----Steel / Stainless Steel---
                Standardowa data wysyłki:
                9 dni robocze
                Konfiguruj
              • Conveyer Roller Shafts / Hollow
                • ZNIŻKA
                • Volume Discount

                MISUMI

                Conveyer Roller Shafts / Hollow

                TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                Long RollersStraight-ShaftsDoubleSteel19.1 ~ 57.2100 ~ 506-
                Cena standardowa (bez VAT):
                10.76 €
                Cena standardowa (bez VAT):
                Cena specjalna
                Standardowa data wysyłki:
                Towar dostępny w magazynie: 1 dzień roboczy
                Niektóre pozycje mogą zostać wysłane tego samego dnia
                Konfiguruj
              • Steel Roller (Roller for Conveyor); M Series (R-3816), Diameter φ 38.1 × Roller Width 100 - 1000

                  MAKITECH

                  Steel Roller (Roller for Conveyor); M Series (R-3816), Diameter φ 38.1 × Roller Width 100 - 1000

                  Moderate to light load φ38 / thickness t1.6 steel roller with enhanced shock resistance and strength. Roller unit of the R-3816 roller conveyor. The widths can be specified in 1 mm increments from 100 to 1000 mm.[Features]· The roller diameter is φ38.1. The thickness is t1.6. The shock resistance is improved. The minimum roller interval is P50.· Standard roller width (nominal) is 100W to 1000W in 50mm increments.· Can be manufactured to desired size.· Machined bearings, high quality.· Model 60 frame standard type
                  Czytaj dalej
                  TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                  Long RollersStraight-No Shaft (Round Bore) / ShaftsDoubleSteel38.1100 ~ 1000Standard
                  Standardowa data wysyłki:
                  10 dni robocze
                  Konfiguruj
                • Conveyor Roller (for Light Loads) SERIES FF1
                  • ZNIŻKA
                  • Volume Discount

                  FUJI SEISAKUSHO

                  Conveyor Roller (for Light Loads) SERIES FF1

                  [Features]Achieves smooth rotation along with miniaturization / weight reduction and low noise, while also featuring shock resistance in addition to chemical resistance, corrosion resistance and elasticity.
                  Czytaj dalej
                  TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                  Long RollersStraight-No Shaft (Round Bore)DoubleResin18 ~ 57100 ~ 600Standard / Chemical Resistance
                  Cena standardowa (bez VAT):
                  7.96 €
                  Cena standardowa (bez VAT):
                  Cena specjalna
                  Standardowa data wysyłki:
                  Towar dostępny w magazynie: 1 dzień roboczy
                  Niektóre pozycje mogą zostać wysłane tego samego dnia
                  Konfiguruj
                • Conveyor Roller (for Medium / Heavy Load) SERIES FF7
                  • Volume Discount

                  FUJI SEISAKUSHO

                  Conveyor Roller (for Medium / Heavy Load) SERIES FF7

                  [Features]- Multipurpose roller with superior shock resistance and quiet performance.- Housing employs polycarbonate, which confers excellent shock resistance.- Multipurpose roller which can be used in a wide variety of different fields.- Both press bearings (steel, stainless steel) and precision bearings (6002ZZ) are available for the bearing element.- Additionally, either hardened polyvinyl chloride (PVC) or steel (ST) can be used for the tube material, depending on the application.
                  Czytaj dalej
                  TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                  Long RollersStraight-No Shaft (Round Bore)DoubleResin50 ~ 57100 ~ 700Standard / Low Noise Characteristics
                  Cena standardowa (bez VAT):
                  59.79 €
                  Standardowa data wysyłki:
                  14 dni robocze
                  Konfiguruj
                • Roller with Axel (Steel)
                  • Volume Discount

                  TRUSCO NAKAYAMA

                  Roller with Axel (Steel)

                  [Features]● This is a roller that can be installed as a roller replacement for conveyors of different manufacturers by adjusting the included collar.The 38 mm roller is for light loads, 57 mm for moderate loads, and 60.5 mm for moderate loads.
                  Czytaj dalej
                  TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                  Long RollersStraight-Shafts-Steel38 ~ 60.5298 ~ 598Standard
                  Cena standardowa (bez VAT):
                  12.78 €
                  Standardowa data wysyłki:
                  6 dni robocze
                  Konfiguruj
                • Blank steel cylinder conveyor rollers (S60)

                    BS ROLLEN

                    Blank steel cylinder conveyor rollers (S60)

                    Idlers transport a wide variety of goods on roller conveyors, containers, workpiece carriers, boxes, cartons, but also mesh boxes and pallets. Carrying rollers steel tube bright - Carrying roller bearing made of galvanised sheet steel with deep groove ball bearing. Higher load capacity than plastic idlers, for sharp-edged goods to be conveyed, containers with steel runners or for loading by crane or forklift.
                    Czytaj dalej
                    TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                    ---Both Ends ThreadedDoubleSteel60--
                    Cena standardowa (bez VAT):
                    37.14 €
                    Standardowa data wysyłki:
                    3 dni robocze
                    Konfiguruj
                  • Stainless Steel Roller, M Series (RS-1912), Diameter φ 19 × Width 100 - 500

                      MAKITECH

                      Stainless Steel Roller, M Series (RS-1912), Diameter φ 19 × Width 100 - 500

                      A small-diameter ⌀ 19-mm stainless steel roller. Suitable for transporting small objects. A single roller unit for the RS-1912 roller conveyor. The widths of the roller can be specified in 1-mm increments from 100–500 mm.[Features]· The roller diameter is ⌀ 19.0 mm. The minimum roller interval is P25.· The standard roller width (nominal) is 100–500 mm in increments of 50 mm.· This roller can also be manufactured in non-standard sizes.
                      Czytaj dalej
                      TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                      Long RollersStraight-No Shaft (Round Bore) / ShaftsDoubleStainless Steel19100 ~ 500Water Resistance
                      Standardowa data wysyłki:
                      10 dni robocze
                      Konfiguruj
                    • Brake Roller SERIES 4000
                      • Volume Discount

                      FUJI SEISAKUSHO

                      Brake Roller SERIES 4000

                      [Features]- Simple mechanics with superior noise suppressing design and durability.- Possible to control transport speed without active application of power, such as electricity, of objects on slanted conveyors.- The surface of contact parts of the brake roller body is treated with a special rubber to eliminate noise.- Additionally, superior durability can be retained over a long period of time without requiring maintenance.- Mounting can be performed either directly or indirectly depending on the status of the objects being transported/conveyor.
                      Czytaj dalej
                      TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                      Short Rollers-StraightOthersNot ProvidedRubber8565.5Standard
                      Cena standardowa (bez VAT):
                      260.02 €
                      Standardowa data wysyłki:
                      6 dni robocze
                      Konfiguruj
                    • Conveyer Roller / Sprocket Attached

                        MISUMI

                        Conveyer Roller / Sprocket Attached

                        TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                        Long RollersStraight---Steel38.1 ~ 57.2--
                        Standardowa data wysyłki:
                        6 dni robocze
                        Konfiguruj
                      • Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀60.5 × Width 90 - 990 (MR Type)
                        • Volume Discount

                        OKURA YUSOKI

                        Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀60.5 × Width 90 - 990 (MR Type)

                        Heavy duty steel roller. Transport distance and roller width can be specified within the range of 90 - 990 mm.
                        Czytaj dalej
                        TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                        Long RollersStraight-No Shaft (Round Bore) / ShaftsDoubleSteel60.590 ~ 990Standard
                        Cena standardowa (bez VAT):
                        16.42 €
                        Standardowa data wysyłki:
                        9 dni robocze
                        Konfiguruj
                      • Stainless Steel Roller, M Series (RS-3810), Diameter φ 38.1 × Width 100 - 600

                          MAKITECH

                          Stainless Steel Roller, M Series (RS-3810), Diameter φ 38.1 × Width 100 - 600

                          A general purpose ⌀ 38-mm stainless steel roller. A cost-effective RS-3810 roller conveyor roller unit manufactured entirely from stainless steel.[Features]· The roller diameter is ⌀ 38.1 mm. The minimum roller interval is P50.· The standard roller width (nominal) is 100–600 mm in increments of 50 mm.
                          Czytaj dalej
                          TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                          Long RollersStraight-No Shaft (Round Bore) / ShaftsDoubleStainless Steel38.1100 ~ 600-
                          Standardowa data wysyłki:
                          9 dni robocze
                          Konfiguruj
                        • Conveyor Roller (for Medium / Heavy Load) SERIES FF3
                          • Volume Discount

                          FUJI SEISAKUSHO

                          Conveyor Roller (for Medium / Heavy Load) SERIES FF3

                          TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                          Long RollersStraight-No Shaft (Round Bore)DoubleResin50 ~ 57100 ~ 700Standard / Water Resistance
                          Cena standardowa (bez VAT):
                          67.77 €
                          Standardowa data wysyłki:
                          14 dni robocze
                          Konfiguruj
                        • Roller shaft FMC57R for load in the roller conveyor
                          • ZNIŻKA
                          • Volume Discount

                          MEIKIKOU

                          Roller shaft FMC57R for load in the roller conveyor

                          * Sold as a single shaft unit.
                          Czytaj dalej
                          TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                          Shaft for Roller-----12200 ~ 900Standard
                          Cena standardowa (bez VAT):
                          2.55 €
                          Cena standardowa (bez VAT):
                          Cena specjalna
                          Standardowa data wysyłki:
                          Towar dostępny w magazynie: 1 dzień roboczy
                          Niektóre pozycje mogą zostać wysłane tego samego dnia
                          Konfiguruj
                        • Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀18.1 × Width 100 - 500 (EAR Type)

                            OKURA YUSOKI

                            Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀18.1 × Width 100 - 500 (EAR Type)

                            Optimal for small item transport. Transport distance and roller width can be specified within the range of 100 - 500 mm.
                            Czytaj dalej
                            TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                            Long RollersStraight-ShaftsDoubleAluminum18.1400Water Resistance
                            Cena standardowa (bez VAT):
                            17.48 €
                            Standardowa data wysyłki:
                            7 dni robocze
                            Konfiguruj
                          • Single Unit Steel Roller (Roller for Conveyor) Diameter ⌀38 × Width 90 - 690 (QR Type)

                              OKURA YUSOKI

                              Single Unit Steel Roller (Roller for Conveyor) Diameter ⌀38 × Width 90 - 690 (QR Type)

                              Stronger version of type FR. Transport distance and roller width can be specified within the range of 90 - 690 mm.
                              Czytaj dalej
                              TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                              Long RollersStraight-No Shaft (Round Bore) / ShaftsDoubleSteel3890 ~ 690Standard
                              Cena standardowa (bez VAT):
                              9.77 €
                              Standardowa data wysyłki:
                              6 dni robocze
                              Konfiguruj
                            • Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀42.7 × Width 90 - 790 (PR Model)

                                OKURA YUSOKI

                                Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀42.7 × Width 90 - 790 (PR Model)

                                Medium load ⌀42.7 steel roller. Transport distance and roller width can be specified within the range of 90 - 790 mm.
                                Czytaj dalej
                                TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                                Long RollersStraight-No Shaft (Round Bore) / ShaftsDoubleSteel42.790 ~ 790Standard
                                Cena standardowa (bez VAT):
                                11.24 €
                                Standardowa data wysyłki:
                                9 dni robocze
                                Konfiguruj
                              • Single Unit Stainless Steel Roller (Roller for Conveyor), Diameter ⌀42.7 × Width 90 - 690 (PS Type)
                                • Volume Discount

                                OKURA YUSOKI

                                Single Unit Stainless Steel Roller (Roller for Conveyor), Diameter ⌀42.7 × Width 90 - 690 (PS Type)

                                Roller diameter of ⌀42.7 for use with moderate loads. Transport distance and roller width can be specified within the range of 90 - 690 mm.
                                Czytaj dalej
                                TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                                Long RollersStraight-ShaftsDoubleStainless Steel42.7620 ~ 690Water Resistance
                                Cena standardowa (bez VAT):
                                80.35 €
                                Standardowa data wysyłki:
                                7 dni robocze
                                Konfiguruj
                              • Roller Single Unit FMC57R without Shaft, For Light Loads, Roller Conveyor
                                • Volume Discount

                                MEIKIKOU

                                Roller Single Unit FMC57R without Shaft, For Light Loads, Roller Conveyor

                                *Sold as a roller unit.[Features]· A versatile standard type suitable for transporting products with soft bases, such as cardboard cases
                                Czytaj dalej
                                TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                                Long RollersStraight-No Shaft (Round Bore)DoubleSteel38100 ~ 800Standard
                                Cena standardowa (bez VAT):
                                16.64 €
                                Standardowa data wysyłki:
                                6 dni robocze
                                Konfiguruj
                              • Roller with Shaft (Stainless Steel)

                                  TRUSCO NAKAYAMA

                                  Roller with Shaft (Stainless Steel)

                                  [Features]- This is a roller that can be installed as a roller replacement for conveyors of different manufacturers by adjusting the included collar.The 38 mm roller is for light loads and 60.5 mm for moderate loads, all-stainless steel rollers. Water and chemical resistant.
                                  Czytaj dalej
                                  TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                                  Long RollersStraight-Shafts-Stainless Steel38 ~ 60.5298 ~ 488Water Resistance / Chemical Resistance
                                  Cena standardowa (bez VAT):
                                  68.25 €
                                  Standardowa data wysyłki:
                                  12 dni robocze
                                  Konfiguruj
                                • Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀32 × Width 90 - 620 (FR Type)
                                  • Volume Discount

                                  OKURA YUSOKI

                                  Single Unit Steel Roller (Roller for Conveyor), Diameter ⌀32 × Width 90 - 620 (FR Type)

                                  More economical than KR when work dimensions are 150 mm or less. Transport distance and roller width can be specified within the range of 90 - 620 mm.
                                  Czytaj dalej
                                  TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                                  Long RollersStraight-No Shaft (Round Bore) / ShaftsDoubleSteel3290 ~ 620Standard
                                  Cena standardowa (bez VAT):
                                  8.31 €
                                  Standardowa data wysyłki:
                                  9 dni robocze
                                  Konfiguruj
                                • Single Unit Steel Roller (Roller for Conveyor) High Strength, Roller Diameter ⌀57 × Width 90 - 990 (SSR Type)

                                    OKURA YUSOKI

                                    Single Unit Steel Roller (Roller for Conveyor) High Strength, Roller Diameter ⌀57 × Width 90 - 990 (SSR Type)

                                    Shock-resistant type which improves upon the strength of the SR type. Transport distance and roller width can be specified within the range of 90 – 990 mm.
                                    Czytaj dalej
                                    TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                                    Long RollersStraight-No Shaft (Round Bore) / ShaftsDoubleSteel57150 ~ 620Standard
                                    Cena standardowa (bez VAT):
                                    15.64 €
                                    Standardowa data wysyłki:
                                    9 dni robocze
                                    Konfiguruj
                                  • Single Unit Stainless Steel Roller (Roller for Conveyor), Diameter ⌀18 × Width 90 - 390 (ES Type)

                                      OKURA YUSOKI

                                      Single Unit Stainless Steel Roller (Roller for Conveyor), Diameter ⌀18 × Width 90 - 390 (ES Type)

                                      Stainless steel roller with minimum roller diameter of ⌀18. Optimal for transport of ultra-small materials. Transport distance and roller width can be specified within the range of 90 - 390 mm.
                                      Czytaj dalej
                                      TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                                      Long RollersStraight-No Shaft (Round Bore) / ShaftsDoubleStainless Steel1890 ~ 305Water Resistance
                                      Cena standardowa (bez VAT):
                                      22.18 €
                                      Standardowa data wysyłki:
                                      9 dni robocze
                                      Konfiguruj
                                    • Single Unit Plastic Roller (Conveyor Roller), Diameter ⌀50 (Stainless Steel Shaft) × Width 90 - 620 (BLS Type)
                                      • Volume Discount

                                      OKURA YUSOKI

                                      Single Unit Plastic Roller (Conveyor Roller), Diameter ⌀50 (Stainless Steel Shaft) × Width 90 - 620 (BLS Type)

                                      ⌀50 resin roller for light loads. Stainless steel shaft type. Transport distance and roller width can be specified within the range of 90 - 620 mm.
                                      Czytaj dalej
                                      TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                                      Long RollersStraight-No Shaft (Round Bore) / ShaftsDoubleResin5090 ~ 620Water Resistance
                                      Cena standardowa (bez VAT):
                                      31.03 €
                                      Standardowa data wysyłki:
                                      7 dni robocze
                                      Konfiguruj
                                    • Steel roller (conveyor roller)  M Series (standard bearing)  diameter φ 57.2 x width 100-1000

                                        MAKITECH

                                        Steel roller (conveyor roller) M Series (standard bearing) diameter φ 57.2 x width 100-1000

                                        φ 57 mm, T2.6 roller which employs a standard bearing for quiet operation and high durability. Roller unit of the R-5721NB roller conveyor.[Features]· Easy to install thanks to the bearing and resin integrated boss.· Silent type.· High durability thanks to standard bearing.
                                        Czytaj dalej
                                        TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                                        Long RollersStraight-No Shaft (Round Bore) / ShaftsDoubleSteel57.2100 ~ 1000Standard
                                        Standardowa data wysyłki:
                                        10 dni robocze
                                        Konfiguruj
                                      • Roller Single Unit FLB38R with Shaft for Light Loads, Roller Conveyor
                                        • Volume Discount

                                        MEIKIKOU

                                        Roller Single Unit FLB38R with Shaft for Light Loads, Roller Conveyor

                                        *Sold as a roller unit.[Features]· A versatile standard type suitable for transporting products with soft bases, such as cardboard cases
                                        Czytaj dalej
                                        TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                                        Long RollersStraight-Shafts-Steel38100 ~ 800Standard
                                        Cena standardowa (bez VAT):
                                        17.12 €
                                        Standardowa data wysyłki:
                                        6 dni robocze
                                        Konfiguruj
                                      • Roller single body FMC57R without shaft for moderate loads on the roller conveyor
                                        • Volume Discount

                                        MEIKIKOU

                                        Roller single body FMC57R without shaft for moderate loads on the roller conveyor

                                        ø58 steel roller and steel frame. Very versatile standard type.
                                        Czytaj dalej
                                        TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                                        Long RollersStraight-No Shaft (Round Bore)DoubleSteel57200 ~ 550Standard
                                        Cena standardowa (bez VAT):
                                        20.90 €
                                        Standardowa data wysyłki:
                                        6 dni robocze
                                        Konfiguruj
                                      • Roller single body FMS57R with shaft for load in the roller conveyor
                                        • Volume Discount

                                        MEIKIKOU

                                        Roller single body FMS57R with shaft for load in the roller conveyor

                                        *Sold as a roller unit.[Features]- Roller is 2.1 mm thick and can withstand shock better than the FMC57R roller.
                                        Czytaj dalej
                                        TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                                        Long RollersStraight-Shafts-Steel57100 ~ 1000Standard
                                        Cena standardowa (bez VAT):
                                        21.79 €
                                        Standardowa data wysyłki:
                                        12 dni robocze
                                        Konfiguruj
                                      • Roller single body FMC57R without shaft for load in the roller conveyor
                                        • Volume Discount

                                        MEIKIKOU

                                        Roller single body FMC57R without shaft for load in the roller conveyor

                                        *Sold as a roller unit.
                                        Czytaj dalej
                                        TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                                        Long RollersStraight-No Shaft (Round Bore)DoubleSteel57100 ~ 850Standard
                                        Cena standardowa (bez VAT):
                                        20.31 €
                                        Standardowa data wysyłki:
                                        12 dni robocze
                                        Konfiguruj
                                      • Roller Shaft FLB38R for Roller Conveyor / Light Loads
                                        • Volume Discount

                                        MEIKIKOU

                                        Roller Shaft FLB38R for Roller Conveyor / Light Loads

                                        For light duty, ø12. tube is steel * Shaft can be purchased as one unit.
                                        Czytaj dalej
                                        TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                                        Shaft for Roller-----12-Standard
                                        Cena standardowa (bez VAT):
                                        3.35 €
                                        Standardowa data wysyłki:
                                        12 dni robocze
                                        Konfiguruj
                                      • Roller shaft FMS57R for load in the roller conveyor
                                        • Volume Discount

                                        MEIKIKOU

                                        Roller shaft FMS57R for load in the roller conveyor

                                        For medium duty, ø12. tube is steel * Shaft can be purchased as a single unit
                                        Czytaj dalej
                                        TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                                        Shaft for Roller-----12900Standard
                                        Cena standardowa (bez VAT):
                                        13.18 €
                                        Standardowa data wysyłki:
                                        13 dni robocze
                                        Konfiguruj
                                      • Blue plastic cylinder conveyor rollers (S50)

                                          BS ROLLEN

                                          Blue plastic cylinder conveyor rollers (S50)

                                          Idlers transport a wide variety of goods, containers, workpiece carriers, boxes, cartons, as well as wire mesh boxes and pallets on roller conveyors. Idler bearings made of thermoplastic material with two rows of steel balls - gentle on the goods to be transported and smooth-running.
                                          Czytaj dalej
                                          TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                                          ---OthersDoubleResin50--
                                          Cena standardowa (bez VAT):
                                          22.38 €
                                          Standardowa data wysyłki:
                                          3 dni robocze
                                          Konfiguruj
                                        • Blue plastic cylinder conveyor rollers (S63)

                                            BS ROLLEN

                                            Blue plastic cylinder conveyor rollers (S63)

                                            Idlers transport a wide variety of goods on roller conveyors, containers, workpiece carriers, boxes, cartons, but also mesh boxes and pallets. Idler bearings made of thermoplastic material with deep groove ball bearings and labyrinth seals - gentle on the goods to be transported and smooth-running.
                                            Czytaj dalej
                                            TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                                            ---Both Ends ThreadedDoubleResin63--
                                            Cena standardowa (bez VAT):
                                            37.36 €
                                            Standardowa data wysyłki:
                                            3 dni robocze
                                            Konfiguruj
                                          • Blank steel cylinder conveyor rollers (S80)
                                            • ZNIŻKA

                                            BS ROLLEN

                                            Blank steel cylinder conveyor rollers (S80)

                                            Idlers transport a wide variety of goods on roller conveyors, containers, workpiece carriers, boxes, cartons, but also mesh pallets and pallets. Carrying rollers steel tube bright - Carrying roller bearing made of galvanised sheet steel with deep groove ball bearing. Higher load capacity than plastic idlers, for sharp-edged goods, containers with steel runners or for loading by crane or forklift.
                                            Czytaj dalej
                                            TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                                            ---Both Ends ThreadedDoubleSteel80--
                                            Cena standardowa (bez VAT):
                                            31.68 €
                                            Cena standardowa (bez VAT):
                                            Cena specjalna
                                            Standardowa data wysyłki:
                                            Towar dostępny w magazynie: 1 dzień roboczy
                                            Niektóre pozycje mogą zostać wysłane tego samego dnia
                                            Konfiguruj
                                          • Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀42 × Width 240 - 490 (AR Type)
                                            • ZNIŻKA
                                            • Volume Discount

                                            OKURA YUSOKI

                                            Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀42 × Width 240 - 490 (AR Type)

                                            Light and clean. Transport distance and roller width can be specified within the range of 240 - 490 mm.
                                            Czytaj dalej
                                            TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                                            Long RollersStraight-No Shaft (Round Bore) / ShaftsDoubleAluminum42240 ~ 490Water Resistance
                                            Cena standardowa (bez VAT):
                                            15.27 €
                                            Cena standardowa (bez VAT):
                                            Cena specjalna
                                            Standardowa data wysyłki:
                                            Towar dostępny w magazynie: 1 dzień roboczy
                                            Niektóre pozycje mogą zostać wysłane tego samego dnia
                                            Konfiguruj
                                          • Aluminum Roller Unit (Roller For Conveyor), Resin Bearing Type, Diameter ø42 × Width 240-490 (ZAR Type)

                                              OKURA YUSOKI

                                              Aluminum Roller Unit (Roller For Conveyor), Resin Bearing Type, Diameter ø42 × Width 240-490 (ZAR Type)

                                              [Features]· Low noise type with resin bearings.· Conveyor length and roller width within the range of 240 to 490 mm can be specified.
                                              Czytaj dalej
                                              TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                                              Long RollersStraight-No Shaft (Round Bore) / ShaftsDoubleAluminum42305 ~ 490Water Resistance
                                              Cena standardowa (bez VAT):
                                              16.37 €
                                              Standardowa data wysyłki:
                                              7 dni robocze
                                              Konfiguruj
                                            • Steel Tapered Roller Starter, Diameter ø42.7 (R500) × Width 305 to 690 (CTR Type)

                                                OKURA YUSOKI

                                                Steel Tapered Roller Starter, Diameter ø42.7 (R500) × Width 305 to 690 (CTR Type)

                                                Compact design with a frame internal radius of 500 mm. Transport distance and roller width can be specified within the range of 305 - 690 mm.
                                                Czytaj dalej
                                                TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                                                Long RollersTapered-ShaftsDoubleSteel42.7490Standard
                                                Cena standardowa (bez VAT):
                                                82.18 €
                                                Standardowa data wysyłki:
                                                9 dni robocze
                                                Konfiguruj
                                              • Steel Tapered Roller Starter, Diameter ø42.7 (R900) × Width 305 to 690 (NTR Type)
                                                • Volume Discount

                                                OKURA YUSOKI

                                                Steel Tapered Roller Starter, Diameter ø42.7 (R900) × Width 305 to 690 (NTR Type)

                                                Dedicated tapered roller for curves. The inside frame radius is 900 mm. Transport distance and roller width can be specified within the range of 305 - 690 mm.
                                                Czytaj dalej
                                                TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                                                Long RollersTapered-ShaftsDoubleSteel42.7390 ~ 690Standard
                                                Cena standardowa (bez VAT):
                                                61.10 €
                                                Standardowa data wysyłki:
                                                9 dni robocze
                                                Konfiguruj
                                              • Single Unit Steel Tapered Roller (Roller for Conveyor), Diameter ⌀57 (R900) × Width 305 - 790 (TTR Type)

                                                  OKURA YUSOKI

                                                  Single Unit Steel Tapered Roller (Roller for Conveyor), Diameter ⌀57 (R900) × Width 305 - 790 (TTR Type)

                                                  Durable type dedicated tapered roller for curves. The inside frame radius is 900 mm. Transport distance and roller width can be specified within the range of 305-790 mm.
                                                  Czytaj dalej
                                                  TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                                                  Long RollersTapered-ShaftsDoubleSteel57390Standard
                                                  Cena standardowa (bez VAT):
                                                  88.05 €
                                                  Standardowa data wysyłki:
                                                  9 dni robocze
                                                  Konfiguruj
                                                • Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀19.1 × Width 90 - 490 (ER Type)

                                                    OKURA YUSOKI

                                                    Single Unit Aluminum Roller (Roller for Conveyor), Diameter ⌀19.1 × Width 90 - 490 (ER Type)

                                                    Smallest available steel roller. Optimal for small item transport. Transport distance and roller width can be specified within the range of 90 - 490 mm.
                                                    Czytaj dalej
                                                    TypeLong Roller TypeShort Roller TypeShaft TypeBearingRoller MaterialO.D. D(Ø)Width W(mm)Properties
                                                    Long RollersStraight-ShaftsDoubleSteel19.1150 ~ 490Standard
                                                    Cena standardowa (bez VAT):
                                                    16.25 €
                                                    Standardowa data wysyłki:
                                                    9 dni robocze
                                                    Konfiguruj

                                                  Ostatnio oglądane produkty

                                                  Przykładowe artykuły MISUMI powiązane z tą kategorią

                                                  Znajdź inne przykłady