Keyless Bushing (Fastening Fittings)
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Recommendation
Tapered Clamping Bush 1008 with Inch Drill
CONCAR
[Specifications]
・Type: 1008
・Body Material: Cast Iron
・Standard: British Standard BS 46 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 9.45 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
- Recommendation
Tapered Clamping Bush 1008 with Metric Drill
CONCAR
[Specifications]
・Type: 1008
・Body Material: Cast Iron
・Standard: DIN 6885 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 4.72 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
- Promotional pricing
Keyless Bushings / Standard
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- Stock
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 35.76 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Keyless Bushings / Straight for High Torque
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- Stock
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 105.79 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Compact and self-centering locking device KBS61
KBK
· Large clamping range
· High centering capability and good concentricity properties
· Compact design
· Available starting from 5mm shaft diameter
· Torque range: 6 - 1900Nm- 2D / 3D CAD data available
Configure nowStarting from∗ ： 10.35 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Keyless Bushings / Compact
MISUMI
[Features] It has a centring function and is suitable for a smaller hub.- Volume Discount
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 31.74 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Mecha-Lock MN Series, Nut Type
ISEL
Easy-to-tighten nut type key-less bushing (fastening fitting).
[Features]
· Tightening the nut shortens the tightening time.
· Easiest assembly among mechanical lock series.
· Centering can be done by simply tightening both the sides.
· Also contributes to reduction of hub outer diameter.
[Applications]
· Ideal for mounting on power transmission devices (pulleys, etc.) that especially have a folding mechanism, such as machine tools and transfer devices.
· Ideal for installations with thinner hub thickness and low torque.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 46.53 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Configure now
Starting from∗ ： 9.33 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Shrink Disc
KBK
· For hollow shaft connections
· Applicable for high bending moments
· Short overall length
· Good concentricity properties
· Self-centering and self-releasing
· Torque range: 40 - 327000Nm- 2D / 3D CAD data available
Configure nowStarting from∗ ： 14.41 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
- Promotional pricing
Self-centering locking Device with flange KBS16
KBK
· For connections in the smallest places
· Very short design
· No axial displacement during assembly
· Self-centering
· Torque range: 260 - 36100Nm- 2D / 3D CAD data available
Configure nowStarting from∗ ： 9.90 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Keyless Bushings / Straight
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- Stock
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 35.14 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Locking Elements 8006
RINGFEDER
Ideally adaptable clamping element made of stainless steel for large transmission forces in a small space. Absolutely backlash-free, wear-free and maintenance-free. Also suitable for coarser tolerances.- 3D CAD data available
Configure nowStarting from∗ ： 6.60 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
Self-centering locking device KBS13
KBK
· For connections in the smallest places
· Very short design
· Self-centering
· Torque range: 310 - 46980Nm- 2D / 3D CAD data available
Configure nowStarting from∗ ： 9.90 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Self-centering locking device for small hubs KBS80
KBK
· For high concentricity and perpendicularity of the components
· No axial displacement during assembly
· Self-centering
· Torque range: 12 – 17500Nm- 2D / 3D CAD data available
Configure nowStarting from∗ ： 12.08 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Locking Assemblies 7012
RINGFEDER
Clamping set with a narrow design. Particularly suitable for tight installation conditions and coarser tolerance fluctuations with high power reserves.- 3D CAD data available
Configure nowStarting from∗ ： 61.87 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Locking Assemblies BAR
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium torques.
• Very good distribution of pressure.
• Very good self-centering.
• Self-releasing at dismounting.
• Also suitable for large hub and shaft tolerances.
• Slight axial offset possible during assembly.- Volume Discount
Configure nowStarting from∗ ： 24.93 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Element
KBK
· Very cost-effective
· For medium and low torques
· Requests a mounting flange provided by the customer
· Compact installation dimensions
· Non self-centering
· Torque range: 2,4 - 31500Nm- 2D / 3D CAD data available
Configure nowStarting from∗ ： 2.83 € Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
- Promotional pricing
Keyless Bushings / Easy Mounting (Nut)
MISUMI
[Features] It can be easily installed by simply tightening 1 nut.- Volume Discount
- Order quantities extended (D-JIT)
- Stock
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 40.66 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
POSI LOCK G
MIKI PULLEY
Shaft and mounting parts have a large allowable dimensions tolerance, and can be easily aligned and positioned. Can support heavy loads.
[Features]
· Tightening the clamping bolt moves the 2 taper rings in the shaft direction.
· At this time, the wedging action between both the inner ring and the outer ring against the taper surface produces force that pushes against the shaft and hub internal surface. This force completely connects the axis and shaft.
· The PSL-G has an even transmission ability due to its simple construction and strong components, and it can also cope with heavy loads.
· Short in shaft direction, does not take up more space than necessary.
· PSL-G-C (simple rust-proofing specification) is a simple rust proofing specification that involves applying electroless nickel plating to the main body.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 54.73 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
OPTIBELT Taper Bushing with Metric Bore
OPTIBELT
[Specifications]
・Shaft Bore Dia. d(Ø): 14-100
・Allowable Torque(N•m): 5.7-195
・Overall Length W(mm): 22.3-114.3
・Keyway: DIN 6885 Part 1, Shallow key
・Engineering material: 0.6020 (EN-GJL 200)Configure nowStarting from∗ ： 4.78 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
Keyless Bushings / Thin
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 28.46 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Mecha-Lock MKA, Rust-Proof Standard Electroless Nickel Plating Specifications
ISEL
Centering function suppresses outer circumference and terminal surface run-out. Electroless nickel plated product.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 56.59 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
KanaLock (Cost-Effective Product) Model KPL200
KATAYAMA CHAIN
KPL200 is a dedicated KanaLock for shafts and bosses that require substantial transmission torque. Easy mounting. Applicable shaft diameter 19 mm to 70 mm.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 19.79 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Keyless Bushing A.P.LOCK SAPL-AK Series
SUNGIL
[Features]
· Self-centering function: Prevents minute Off-centering.
· Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface.
· Internal diameters 4.5ø to 40ø standardized.
· Has simple structure for easy assembly.
· Choose from stainless steel (vacuum environments) or electroless nickel plated products (corrosion proof) to suit the use environment- 2D CAD data available
Configure nowStarting from∗ ： 24.96 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Tapered Clamping Bush 2517 with Metric Drill
CONCAR
[Specifications]
・Type: 2517
・Body Material: Cast Iron
・Standard: DIN 6885 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 8.18 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Mechanical Lock MR Thin Type
ISEL
Using thin-type keyless bushing (fastening fitting), the outer diameter can be reduced.
[Features]
· Ideal for when a thin-wall hub design is desired.
· The outer diameter of the hub can be reduced by making the wall thinner.
· Can be used for overall short length hubs.
· Installation time is reduced by reducing the number of bolts.
· With short surface pressure section, the product is ideal for reducing the width of the hub.
[Applications]
· Ideal for mounting on power transmission devices (pulleys, etc.) that especially have a folding mechanism, such as machine tools and transfer devices.
· Can be used for overall short length hubs.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 46.50 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
KanaLock (Cost-Effective Product) Model KPL300
KATAYAMA CHAIN
[Features]
· For model KPL300, mounting space has been extremely reduced in a radial direction, embedding of up to 4 KanaLocks can be selected.
· This facilitates great torque transmission.
· Boss hole and shaft hole fitting is up to H8/h8- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 5.43 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Keyless Bushing A.P.LOCK SAPL-C Series
SUNGIL
[Features]
· Self-centering function: Prevents minute Off-centering.
· Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface. (Most compact design A.P. Lock)
· Suitable for short hubs.
· Internal ring mounts to the terminal face, preventing the hub from moving when connected.
· Choose from stainless steel or electroless nickel plated products to suit the use environment.- 2D CAD data available
Configure nowStarting from∗ ： 29.24 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
- Promotional pricing
Short locking device for higher tolerances KBS40
KBK
· Costs-effective
· Very short
· Large span
· Non self-centering
· Torque range: 255 - 68000Nm- 2D / 3D CAD data available
Configure nowStarting from∗ ： 11.77 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Locking Assemblies 7015
RINGFEDER
The self-centering precision clamping set for the transmission of maximum torques or axial forces with special demands on the concentricity of the parts to be clamped, as well as for applications subject to bending moments.Large transmittable circumferential forces - the long, shallow angles of the cones allow maximum torques or axial forces to be transmitted with a RfN 7015.0 clamping set. During assembly, the clamping set, shaft and hub remain in position relative to each other, thus ensuring additional safety in relation to 3-part construction types. Shaft and hub are only pressure loaded.- 3D CAD data available
Configure nowStarting from∗ ： 590.33 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Locking Elements Slitted 8006
RINGFEDER
Ideally adaptable clamping element made of stainless steel for large transmission forces in a small space. Absolutely backlash-free, wear-free and maintenance-free. Also suitable for coarser tolerances.- 3D CAD data available
Configure nowStarting from∗ ： 7.65 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
Keyless Bushing A.P.LOCK SAPL-B Series
SUNGIL
[Features]
· Self-centering function: Prevents minute Off-centering.
· SAPL-A Depending on the type, the cover outer diameter and bolt size are both large, providing comparatively high durability relative to the corresponding internal diameter.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 27.26 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Tapered Clamping Bush 1610 with Metric Drill
CONCAR
[Specifications]
・Type: 1610
・Body Material: Cast Iron
・Standard: DIN 6885 Part 1
Taper bushes are used to affix pulleys or couplings to shafts. Each taper bush is fitted with a feather keyway in case higher loads occur during the power transfer. ConCar has these bushes in its product range, with metric and imperial bores.Configure nowStarting from∗ ： 8.26 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Locking Assemblies 7015.1
RINGFEDER
Locking Assembly for transmission of torques, axial forces and high bending moments at reduced contact pressures, with special requirements to the true running of the clamped pieces. Special features With the long and flat angle of the cones, the required loads can be transferred with one Locking Assembly RfN 7015.1. During mounting Locking Assembly, shaft and hub remain to each other in position. Compared to three-part construction types, thus an additional safety is provided. Shaft and hub are only compression loaded.- 3D CAD data available
Configure nowStarting from∗ ： 590.33 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Locking Assemblies Stainless Steel 7090
RINGFEDER
Stainless clamping set with central nut. Ideal for small components, tight installation space. The construction by the central clamping nut makes this clamping set very easy to install and has an excellent concentricity and concentricity.- 3D CAD data available
Configure nowStarting from∗ ： 36.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
Mecha Lock MA, Standard Type
ISEL
[Features]
· 34 models that have shaft diameters standardized from ø5 to ø85.
· Centering function suppresses outer circumference and terminal surface run-out.
· Loose design of slope angle degrees produces a self-locking effect.
· Hub internal diameter can be used with pass-through machining.
· Wide range of hub options with thin walls and low surface pressure- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 38.74 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Mecha Lock MA, Standard High-Torque Type
ISEL
Centering function suppresses outer circumference and terminal surface run-out. High torque specifications.
[Features]
· 21 models that have shaft diameters standardized from ø25 to ø150.
· High torque transmission specifications.
· With centering function.
· Loose design of slope angle degrees produces a self-locking effect.
· Hub internal diameter can be used with pass-through machining, wide range of options available during design- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 85.34 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Mecha-Lock MKT, Rust-Proof General Purpose Type, Electroless Nickel Plating Specifications
ISEL
No drag when connecting for easy removal. Electroless nickel plated product.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 106.31 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
Mechanical Lock MSA Rust-proof Standard Stainless Steel Specifications
ISEL
Centering function suppresses outer circumference and terminal surface run-out. Stainless steel specifications.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 88.33 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
POSI LOCK D
MIKI PULLEY
Shaft and mounting parts have a large allowable dimensions tolerance, and can be easily aligned and positioned. Medium load and lightweight type.
[Features]
· Tighten the clamping bolt to move the outer ring in the shaft direction.
· At this time, the wedge action on the tapered face with the inner ring creates a force that pushes the shaft and the hub inner face, which forces the shaft and the hub to be fully engaged.
· The PSL-D is designed for medium loading, with a small surface pressure and reduced installation diameter and weight.
· Short in shaft direction, does not take up more space than necessary.
· PSL-D-C is a simple rust proofing specification that involves applying electroless nickel plating to the main body.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 73.77 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Keyless Bushing A.P.LOCK SAPL-CK Series
SUNGIL
[Features]
· Self-centering function: Prevents minute Off-centering.
· Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface. (Most compact design A.P. Lock)
· Suitable for short hubs.
· Internal ring mounts to the terminal face, preventing the hub from moving when connected.
· Choose from stainless steel or electroless nickel plated products to suit the use environment.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 35.43 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Locking Assemblies COM-C
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium to high torques.
• Self-centering.
• No axial offset.
Concentricity: 0.02 to 0.04 mm.- Volume Discount
Configure nowStarting from∗ ： 20.05 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-C, Stainless
MAEDLER
Material: Stainless steel 1.4401 (AISI 316).
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium torques.
• Self-centering.
• No axial offset.
Concentricity: 0.02 to 0.04 mm.- Volume Discount
Configure nowStarting from∗ ： 72.66 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies TOK Version A
MAEDLER
Material Version A: Steel, bright.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium torques.
• Self-centering.
• Axial offset during mounting (can be compensated by correct positioning).- Volume Discount
Configure nowStarting from∗ ： 12.78 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Clamping Bushes E-N
MAEDLER
Material: Stainless steel 1.405 (AISI 431).
The clamping bush consists of a double-walled steel sleeve filled with a pressure medium, and a flange part. Inside the flange there is a screw and a piston with seal to build up compression.
Function: When the thrust screw is tightened, the sleeve expands uniformly against shaft and hub, creating a rigid connection through frictional force. When the thrust screw is loosened, the bush returns to its initial position and can be easily disassembled.
Concentricity: 0.02 mm.
Tolerances: Shaft h7 for d = 15 mm.
Shaft k6-h7 for d = 19, 22, 24, 28 and 38 mm.
Shaft h8 for the other diameters d.
Hub H7.
Temperature range: -30 oC to 85 oC.- Volume Discount
Configure nowStarting from∗ ： 427.52 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Type |
| Centering |
| Body Material |
| Shaft Bore Dia. d(mm) |
| Allowable Torque Range(N•m) |
| Surface Treatment |
| Hub Dia. D1(mm) |
| Tightening Structure |
| Tightening Method |
| Allowable Torque(N•m) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | CONCAR | CONCAR | MISUMI | MISUMI | KBK | MISUMI | ISEL | KBK | KBK | KBK | MISUMI | RINGFEDER | KBK | KBK | RINGFEDER | MAEDLER | KBK | MISUMI | MIKI PULLEY | OPTIBELT | MISUMI | ISEL | KATAYAMA CHAIN | SUNGIL | CONCAR | ISEL | KATAYAMA CHAIN | SUNGIL | KBK | RINGFEDER | RINGFEDER | SUNGIL | CONCAR | RINGFEDER | RINGFEDER | ISEL | ISEL | ISEL | ISEL | MIKI PULLEY | SUNGIL | MAEDLER | MAEDLER | MAEDLER | MAEDLER |
| Product Series | Mecha-Lock MKA, Rust-Proof Standard Electroless Nickel Plating Specifications | Mecha-Lock MKT, Rust-Proof General Purpose Type, Electroless Nickel Plating Specifications | Mechanical Lock MSA Rust-proof Standard Stainless Steel Specifications | ||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||
| Starting from∗ | 9.45 € *Unit price with basic configuration | 4.72 € *Unit price with basic configuration | 35.76 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 105.79 € *Unit price with basic configuration Volume Discount | 10.35 € Special price *Unit price with basic configuration Promotional pricing | 31.74 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 46.53 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 9.33 € *Unit price with basic configuration | 14.41 € *Unit price with basic configuration | 9.90 € Special price *Unit price with basic configuration Promotional pricing | 35.14 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 6.60 € *Unit price with basic configuration | 9.90 € Special price *Unit price with basic configuration Promotional pricing | 12.08 € Special price *Unit price with basic configuration Promotional pricing | 61.87 € *Unit price with basic configuration | 24.93 € *Unit price with basic configuration Volume Discount | 2.83 € *Unit price with basic configuration | 40.66 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 54.73 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 4.78 € *Unit price with basic configuration | 28.46 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 56.59 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 19.79 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 24.96 € *Unit price with basic configuration | 8.18 € *Unit price with basic configuration | 46.50 € *Unit price with basic configuration | 5.43 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 29.24 € *Unit price with basic configuration | 11.77 € Special price *Unit price with basic configuration Promotional pricing | 590.33 € *Unit price with basic configuration | 7.65 € *Unit price with basic configuration | 27.26 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 8.26 € *Unit price with basic configuration | 590.33 € *Unit price with basic configuration | 36.00 € *Unit price with basic configuration | 38.74 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 85.34 € *Unit price with basic configuration Volume Discount | 106.31 € *Unit price with basic configuration | 88.33 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 73.77 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 35.43 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 20.05 € *Unit price with basic configuration Volume Discount | 72.66 € *Unit price with basic configuration Volume Discount | 12.78 € *Unit price with basic configuration Volume Discount | 427.52 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 3 Days | 3 Days | Same day | Same day | Same day | Same day | Same day | 12 Days | 12 Days | Same day | Same day | 5 Days | Same day | Same day | 5 Days | 4 Days | 12 Days | Same day | Same day | 5 Days | Same day | Same day | Same day | 5 Days | 3 Days | 5 Days | Same day | 10 Days | Same day | 5 Days | 5 Days | Same day | 3 Days | 5 Days | 5 Days | Same day | 5 Days | 5 Days | Same day | Same day | Same day | 4 Days | 4 Days | 4 Days | 4 Days |
| Specifications |
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||
| Type | - | - | Flanged | Straight | Straight | Thin Wall | Nut Tightening | - | - | Flanged | Straight | - | Straight | Flanged | - | - | - | Nut Tightening | Straight | - | Direct Mounting | Flanged | Straight | Flanged | - | Thin Wall | Sleeve | Thin Wall | Straight | - | - | Flanged | - | - | - | Flanged | Flanged | Straight | Flanged | Straight | Thin Wall | - | - | - | - |
| Centering | - | - | Provided | Not Provided | - | Provided | Provided | - | - | - | Not Provided | - | - | - | - | Provided | - | Not Provided | - | - | Not Provided | Provided | Not Provided | Provided | - | Provided | Not Provided | Provided | - | - | - | Provided | - | - | - | Provided | Provided | Not Provided | Provided | - | Provided | Provided | Provided | Provided | Provided |
| Body Material | Grey Iron | Grey Iron | Steel / Stainless Steel | Steel | Steel | Steel / Stainless Steel | Steel | - | - | Steel | Steel | - | Steel | Steel | - | - | - | Steel | Steel | - | Steel | Steel | Steel | Steel | Grey Iron | Steel | Steel | Steel | Steel | - | - | Steel | Grey Iron | - | - | Steel | Steel | Steel | Stainless Steel | Steel | Steel | - | - | - | - |
| Shaft Bore Dia. d(mm) | - | - | 5 ～ 70 | 30 ～ 65 | 5 ～ 50 | 5 ～ 50 | 8 ～ 35 | - | - | 18 ～ 180 | 20 ～ 65 | - | 18 ～ 180 | 6 ～ 120 | - | - | - | 8 ～ 35 | 19 ～ 120 | 14 ～ 100 | 5 ～ 30 | 8 ～ 50 | 19 ～ 70 | 5 ～ 50 | - | 6 ～ 50 | 10 ～ 80 | 5 ～ 30 | 19 ～ 220 | - | - | 8 ～ 30 | - | - | - | 5 ～ 70 | 25 ～ 50 | 20 ～ 50 | 8 ～ 50 | 2 ～ 50 | 5 ～ 30 | - | - | - | - |
| Allowable Torque Range(N•m) | - | - | 2.0 to 20.0 ～ 3000.1 to 10000.0 | 1000.1 to 3000.0 ～ 3000.1 to 10000.0 | - | 2.0 to 20.0 ～ 1000.1 to 3000.0 | 20.1 to 50.0 ～ 300.1 to 500.0 | - | - | - | 200.1 to 300.0 ～ 1000.1 to 3000.0 | - | - | - | - | - | - | 20.1 to 50.0 ～ 300.1 to 500.0 | 200.1 to 300.0 ～ 10000.1 to 300000.0 | - | 2.0 to 20.0 ～ 100.1 to 150.0 | 20.1 to 50.0 ～ 1000.1 to 3000.0 | 200.1 to 300.0 ～ 3000.1 to 10000.0 | 2.0 to 20.0 ～ 1000.1 to 3000.0 | - | 2.0 to 20.0 ～ 1000.1 to 3000.0 | 2.0 to 20.0 ～ 1000.1 to 3000.0 | 2.0 to 20.0 ～ 500.1 to 700.0 | - | - | - | 2.0 to 20.0 ～ 500.1 to 700.0 | - | - | - | 2.0 to 20.0 ～ 3000.1 to 10000.0 | 300.1 to 500.0 ～ 1000.1 to 3000.0 | 200.1 to 300.0 ～ 1000.1 to 3000.0 | 20.1 to 50.0 ～ 700.1 to 1000.0 | 2.0 to 20.0 ～ 1000.1 to 3000.0 | 2.0 to 20.0 ～ 500.1 to 700.0 | - | - | - | - |
| Surface Treatment | - | - | Not Provided / Black Oxide / Electroless Nickel Plating | Not Provided | - | Not Provided / Electroless Nickel Plating | Not Provided | - | - | - | Not Provided / Electroless Nickel Plating | - | - | - | - | - | - | Not Provided / Black Oxide / Electroless Nickel Plating | Not Provided / Electroless Nickel Plating | - | Not Provided | Electroless Nickel Plating | Not Provided | Electroless Nickel Plating | - | Not Provided | Not Provided | Not Provided | - | - | - | Not Provided | - | - | - | Not Provided | Not Provided | Electroless Nickel Plating | Not Provided | Not Provided / Electroless Nickel Plating | Electroless Nickel Plating | - | - | - | - |
| Hub Dia. D1(mm) | - | - | 16 ～ 97 | 55 ～ 95 | 16 ～ 80 | 12 ～ 65 | 14 ～ 48 | - | - | 47 ～ 235 | 47 ～ 95 | - | 47 ～ 235 | 14 ～ 155 | - | - | - | 14 ～ 48 | 47 ～ 165 | - | 8 ～ 35 | 21 ～ 72 | 47 ～ 110 | 16 ～ 72 | - | 12 ～ 65 | - | 12 ～ 41 | 47 ～ 285 | - | - | 22 ～ 55 | - | - | - | 16 ～ 97 | 47 ～ 78 | 47 ～ 80 | 21 ～ 72 | 16 ～ 80 | 12 ～ 41 | - | - | - | - |
| Tightening Structure | - | - | Single Cone Type | Double Cone Type | Double Cone Type | Single Cone Type | Tapered Sleeve Type | - | - | Single Cone Type | Double Cone Type | - | Single Cone Type | Single Cone Type | - | - | - | Tapered Sleeve Type | Double Cone Type | - | Single Cone Type | Single Cone Type | Double Cone Type | Single Cone Type | - | Tapered Sleeve Type | Tapered Sleeve Type | Single Cone Type | Double Cone Type | - | - | Single Cone Type | - | - | - | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | - | - | - | - |
| Tightening Method | - | - | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | - | - | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | - | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | - | - | - | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | - | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | - | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | - | - | Mechanical Type (Wedge Type) | - | - | - | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | - | - | - | - |
| Allowable Torque(N•m) | - | - | 2.8 ～ 3400 | 1110 ～ 6400 | - | 3 ～ 2120 | 29.4 ～ 461 | - | - | - | 300 ～ 2990 | - | - | - | - | - | - | 21 ～ 461 | 289 ～ 13500 | 5.7 ～ 195 | 4.2 ～ 149 | 16.6 ～ 1362 | 270 ～ 5100 | 4.6 ～ 1362 | - | 11 ～ 2120 | 6.9 ～ 1860 | 9 ～ 523 | - | - | - | 18 ～ 510 | - | - | - | 7 ～ 3400 | 490 ～ 2430 | 294 ～ 1775 | 10.7 ～ 754.3 | 6 ～ 1760 | 9 ～ 523 | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Type
-
Centering
- Provided
- Not Provided
-
Body Material
-
Shaft Bore Dia. d(mm)
-
Allowable Torque Range(N•m)
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- Clear Anodize
-
Hub Dia. D1(mm)
-
Tightening Structure
-
Tightening Method
-
Allowable Torque(N•m)
Brand
CAD data type
-
- 2D
- 3D
Examples how you can use these components
Categories related to Keyless Bushing (Fastening Fittings)
Metody płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.