Helical Gear

• 

  • Order quantities extended (D-JIT)

  MISUMI

  Helical Gears / Pressure Angle 20Deg. / Helix Angle 45Deg.

  CAD:

  2D

  /3D

  Module	Environmentally Friendly	Number of Teeth(Teeth)	Properties / applications	Material	Twisting Direction	Heat Treatment	Ground Tooth	Surface Treatment
  1 ～ 3	-	10 ～ 30	-	General Steel Material / Stainless Steel / Resin	-	Not Provided	Not Provided	Not Provided / Black Oxide

  Standardowa data wysyłki:

  7 dni robocze

  Konfiguruj
• 

  • Volume Discount

  KOHARA GEAR INDUSTRY

  Ground Helical Gear KHG

  Thermally refined SCM440 material, with induction hardened tooth surface, before hole standard ground precision JISN6 high strength grade, excellent wear-resistance ground helical gear. Adopting the axis-perpendicular module, the assembly distance can be easily calculated like a spur gear, and replacement with a spur gear of the same specification is possible.

  Czytaj dalej

  CAD:

  2D

  /3D

  Module	Environmentally Friendly	Number of Teeth(Teeth)	Properties / applications	Material	Twisting Direction	Heat Treatment	Ground Tooth	Surface Treatment
  1 ～ 3	-	15 ～ 100	-	General Steel Material	Right / Left	Thermal Refined, Induction Hardened	Provided	Black Oxide

  Cena (bez VAT) od:

  66.39 €～

  Standardowa data wysyłki:

  Towar dostępny w magazynie: 1 dzień roboczy

  Niektóre pozycje mogą zostać wysłane tego samego dnia

  Konfiguruj
• 

  MISUMI

  Helical Gears - Module 2.0, Shaft Bore Configurable Type

  Features: Helical gears have a higher contact ratio than spur gears, resulting in superior transmission accuracy and quieter operation.Right-twisted helical gears engage with left-twisted helical gears.Four types of shaft bore are selectable: straight bore, straight bore + tap, keyway, and keyway + tap.Available alterations: Set screw alteration, tapped hole dimension change, stepped hole, both ends stepped hole, hub cut, hub diameter cut, side slotted hole, side through hole, side tapped hole, and side counterbored hole alterations are possible.Lineup by moduleModule 1.0Module 1.5Module 2.5Module 3.0

  Czytaj dalej

  CAD:

  2D

  /3D

  Module	Environmentally Friendly	Number of Teeth(Teeth)	Properties / applications	Material	Twisting Direction	Heat Treatment	Ground Tooth	Surface Treatment
  2	RoHS compliant (10 substances)	15 ～ 100	Not Applicable	General Steel Material	Right / Left	-	-	Not Provided / Black Oxide / Electroless Nickel Plating

  Standardowa data wysyłki:

  7 dni robocze

  Konfiguruj
• 

  • Volume Discount

  KOHARA GEAR INDUSTRY

  Helical Gear

  Meshing ratio is large compared with spur gear, for smooth engagement, effective for noise and vibration control.

  Czytaj dalej

  CAD:

  2D

  /3D

  Module	Environmentally Friendly	Number of Teeth(Teeth)	Properties / applications	Material	Twisting Direction	Heat Treatment	Ground Tooth	Surface Treatment
  2 ～ 3	-	15 ～ 90	-	General Steel Material	Right / Left	Not Provided	Not Provided	Black Oxide

  Cena (bez VAT) od:

  19.78 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount

  KOHARA GEAR INDUSTRY

  Screw Gear SN

  Spiral gears have crossed axes (R & R, L & L) and parallel axes (R & L), depending on combinations of screw direction. Pay attention to axial direction and rotational direction.

  Czytaj dalej

  CAD:

  2D

  /3D

  Module	Environmentally Friendly	Number of Teeth(Teeth)	Properties / applications	Material	Twisting Direction	Heat Treatment	Ground Tooth	Surface Treatment
  1 ～ 4	-	10 ～ 30	-	General Steel Material	Right / Left	Not Provided	Not Provided	Black Oxide

  Cena (bez VAT) od:

  12.37 €～

  Standardowa data wysyłki:

  Towar dostępny w magazynie: 1 dzień roboczy

  Niektóre pozycje mogą zostać wysłane tego samego dnia

  Konfiguruj
• 

  MISUMI

  Helical Gears - Module 2.5, Shaft Bore Configurable Type

  Features: Helical gears have a higher contact ratio than spur gears, resulting in superior transmission accuracy and quieter operation.Right-twisted helical gears engage with left-twisted helical gears.Four types of shaft bore are selectable: straight bore, straight bore + tap, keyway, and keyway + tap.Available alterations: Set screw alteration, tapped hole dimension change, stepped hole, both ends stepped hole, hub cut, hub diameter cut, side slotted hole, side through hole, side tapped hole, and side counterbored hole alterations are possible.Lineup by moduleModule 1.0Module 1.5Module 2.0Module 3.0

  Czytaj dalej

  CAD:

  2D

  /3D

  Module	Environmentally Friendly	Number of Teeth(Teeth)	Properties / applications	Material	Twisting Direction	Heat Treatment	Ground Tooth	Surface Treatment
  2.5	RoHS compliant (10 substances)	15 ～ 80	Not Applicable	General Steel Material	Right / Left	-	-	Not Provided / Black Oxide / Electroless Nickel Plating

  Standardowa data wysyłki:

  7 dni robocze

  Konfiguruj
• 

  MISUMI

  Helical Gears - Module 3.0, Shaft Bore Configurable Type

  Features: Helical gears have a higher contact ratio than spur gears, resulting in superior transmission accuracy and quieter operation.Right-twisted helical gears engage with left-twisted helical gears.Four types of shaft bore are selectable: straight bore, straight bore + tap, keyway, and keyway + tap.Available alterations: Set screw alteration, tapped hole dimension change, stepped hole, both ends stepped hole, hub cut, hub diameter cut, side slotted hole, side through hole, side tapped hole, and side counterbored hole alterations are possible.Lineup by moduleModule 1.0Module 1.5Module 2.0Module 2.5

  Czytaj dalej

  CAD:

  2D

  /3D

  Module	Environmentally Friendly	Number of Teeth(Teeth)	Properties / applications	Material	Twisting Direction	Heat Treatment	Ground Tooth	Surface Treatment
  3	RoHS compliant (10 substances)	15 ～ 70	Not Applicable	General Steel Material	Right / Left	-	-	Not Provided / Black Oxide / Electroless Nickel Plating

  Standardowa data wysyłki:

  7 dni robocze

  Konfiguruj
• 

  • ZNIŻKA

  KYOUIKU GEAR MFG（KG）

  Helical Gear m1 POM White (Polyacetal) Type

  Polyacetal helical gear with lower water absorption than nylon gear, and excellent dimensional stability. As helix angle is 45°, can be used for both helical gear (parallel axis) and screw gear (crossed axis). Directly mountable tapped in 2 points, machined product also available.

  Czytaj dalej

  CAD:

  2D

  Module	Environmentally Friendly	Number of Teeth(Teeth)	Properties / applications	Material	Twisting Direction	Heat Treatment	Ground Tooth	Surface Treatment
  1	-	13 ～ 26	-	Resin	Right / Left	Not Provided	Not Provided	Not Provided

  Cena (bez VAT) od:

  8.60 €～

  Cena specjalna

  Standardowa data wysyłki:

  Towar dostępny w magazynie: 1 dzień roboczy

  Niektóre pozycje mogą zostać wysłane tego samego dnia

  Konfiguruj
• 

  KYOUIKU GEAR MFG（KG）

  Helical Gear m1.5 S45C Type

  Helical gear with induction hardening performed on teeth part. As helix angle is 45°, can be used for both helical gear (parallel axis) and screw gear (crossed axis). Directly mountable tapped in 2 points, machined product also available.

  Czytaj dalej

  CAD:

  2D

  Module	Environmentally Friendly	Number of Teeth(Teeth)	Properties / applications	Material	Twisting Direction	Heat Treatment	Ground Tooth	Surface Treatment
  1.5	-	13 ～ 26	-	General Steel Material	Left	High Frequency	Not Provided	Not Provided

  Cena (bez VAT) od:

  20.29 €～

  Standardowa data wysyłki:

  7 dni robocze

  Konfiguruj
• 

  MISUMI

  Helical Gears - Module 1.0, Shaft Bore Configurable Type

  Features: Helical gears have a higher contact ratio than spur gears, resulting in superior transmission accuracy and quieter operation.Right-twisted helical gears engage with left-twisted helical gears.Four types of shaft bore are selectable: straight bore, straight bore + tap, keyway, and keyway + tap.Available alterations: Set screw alteration, tapped hole dimension change, stepped hole, both ends stepped hole, hub cut, hub diameter cut, side slotted hole, side through hole, side tapped hole, and side counterbored hole alterations are possible.Lineup by moduleModule 1.5Module 2.0Module 2.5Module 3.0

  Czytaj dalej

  CAD:

  2D

  /3D

  Module	Environmentally Friendly	Number of Teeth(Teeth)	Properties / applications	Material	Twisting Direction	Heat Treatment	Ground Tooth	Surface Treatment
  1	RoHS compliant (10 substances)	15 ～ 120	Not Applicable	General Steel Material	Right / Left	-	-	Not Provided / Black Oxide / Electroless Nickel Plating

  Standardowa data wysyłki:

  7 dni robocze

  Konfiguruj
• 

  MISUMI

  Helical Gears - Module 1.5, Shaft Bore Configurable Type

  Features: Helical gears have a higher contact ratio than spur gears, resulting in superior transmission accuracy and quieter operation.Right-twisted helical gears engage with left-twisted helical gears.Four types of shaft bore are selectable: straight bore, straight bore + tap, keyway, and keyway + tap.Available alterations: Set screw alteration, tapped hole dimension change, stepped hole, both ends stepped hole, hub cut, hub diameter cut, side slotted hole, side through hole, side tapped hole, and side counterbored hole alterations are possible.Lineup by moduleModule 1.0Module 2.0Module 2.5Module 3.0

  Czytaj dalej

  CAD:

  2D

  /3D

  Module	Environmentally Friendly	Number of Teeth(Teeth)	Properties / applications	Material	Twisting Direction	Heat Treatment	Ground Tooth	Surface Treatment
  1.5	RoHS compliant (10 substances)	15 ～ 120	Not Applicable	General Steel Material	Right / Left	-	-	Not Provided / Black Oxide / Electroless Nickel Plating

  Standardowa data wysyłki:

  7 dni robocze

  Konfiguruj
• 

  • Volume Discount

  KYOUIKU GEAR MFG（KG）

  Helical Gear m2 S45C Type

  Helical gear with induction hardening performed on teeth part. As helix angle is 45°, can be used for both helical gear (parallel axis) and screw gear (cross axis).

  Czytaj dalej

  CAD:

  2D

  Module	Environmentally Friendly	Number of Teeth(Teeth)	Properties / applications	Material	Twisting Direction	Heat Treatment	Ground Tooth	Surface Treatment
  2	-	13 ～ 26	-	General Steel Material	Right / Left	High Frequency	Not Provided	Not Provided

  Cena (bez VAT) od:

  25.57 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount

  KOHARA GEAR INDUSTRY

  Screw Gear AN

  Uses aluminum bronze as a material, for very tough sliding gear, with excellent wear resistance. Spiral gears are prone to wear and galling, so different combinations of materials are recommended.

  Czytaj dalej

  CAD:

  2D

  /3D

  Module	Environmentally Friendly	Number of Teeth(Teeth)	Properties / applications	Material	Twisting Direction	Heat Treatment	Ground Tooth	Surface Treatment
  1 ～ 2	-	10 ～ 15	-	Brass	Right / Left	Not Provided	Not Provided	Not Provided

  Cena (bez VAT) od:

  33.36 €～

  Standardowa data wysyłki:

  7 dni robocze

  Konfiguruj
• 

  • Volume Discount

  KYOUIKU GEAR MFG（KG）

  Helical Gear m1 Blue (Polyacetal)

  Ideal for preventing contamination in food/packaging equipment, as the blue color of the POM stands out against food ingredients.

  Czytaj dalej

  Module	Environmentally Friendly	Number of Teeth(Teeth)	Properties / applications	Material	Twisting Direction	Heat Treatment	Ground Tooth	Surface Treatment
  1	-	10 ～ 26	-	Resin	Right / Left	Not Provided	Not Provided	Not Provided

  Cena (bez VAT) od:

  13.73 €～

  Standardowa data wysyłki:

  8 dni robocze

  Konfiguruj
• 

  KYOUIKU GEAR MFG（KG）

  Helical Gear m2.5 S45C Type

  Helical gear with induction hardening performed on teeth part. As helix angle is 45°, can be used for both helical gear (parallel axis) and screw gear (cross axis).

  Czytaj dalej

  CAD:

  2D

  Module	Environmentally Friendly	Number of Teeth(Teeth)	Properties / applications	Material	Twisting Direction	Heat Treatment	Ground Tooth	Surface Treatment
  2.5	-	13 ～ 26	-	General Steel Material	Right / Left	High Frequency	Not Provided	Not Provided

  Cena (bez VAT) od:

  34.10 €～

  Standardowa data wysyłki:

  8 dni robocze

  Konfiguruj
• 

  • Volume Discount

  AOKI SEIMITSU KOGYO

  Spiral Gear IS

  [Features] This gear is commonly used for changing the direction of a rotating shaft. [Features] Material: EN 1.1191 Equiv. (JIS G 4051) Tooth profile, accuracy: Solid teeth, class JISN8 (formerly class JIS4) Pressure angle: 20° Helix angle: 45°. Surface treatment: Black oxide coating. Surface finish of the tooth: Cutting. Bore diameter tolerance: JIS H7 class.

  Czytaj dalej

  Module	Environmentally Friendly	Number of Teeth(Teeth)	Properties / applications	Material	Twisting Direction	Heat Treatment	Ground Tooth	Surface Treatment
  2 ～ 3	-	10 ～ 36	-	General Steel Material	Right / Left	Not Provided	Not Provided	Black Oxide

  Cena (bez VAT) od:

  16.70 €～

  Standardowa data wysyłki:

  9 dni robocze

  Konfiguruj
• 

  KYOUIKU GEAR MFG（KG）

  Helical Gear m1.5 POM White (Polyacetal) Type

  Polyacetal helical gear with lower water absorption than nylon gear, and excellent dimensional stability. As helix angle is 45°, can be used for both helical gear (parallel axis) and screw gear (crossed axis). Directly mountable tapped in 2 points, machined product also available.

  Czytaj dalej

  CAD:

  2D

  Module	Environmentally Friendly	Number of Teeth(Teeth)	Properties / applications	Material	Twisting Direction	Heat Treatment	Ground Tooth	Surface Treatment
  1.5	-	13	-	Resin	Right	Not Provided	Not Provided	Not Provided

  Cena (bez VAT) od:

  23.62 €

  Standardowa data wysyłki:

  8 dni robocze

  Konfiguruj
• 

  KYOUIKU GEAR MFG（KG）

  Helical Gear m3 S45C Type

  Helical gear with induction hardening performed on teeth part. As helix angle is 45°, can be used for both helical gear (parallel axis) and screw gear (cross axis).

  Czytaj dalej

  CAD:

  2D

  Module	Environmentally Friendly	Number of Teeth(Teeth)	Properties / applications	Material	Twisting Direction	Heat Treatment	Ground Tooth	Surface Treatment
  3	-	13 ～ 26	-	General Steel Material	Right / Left	High Frequency	Not Provided	Not Provided

  Cena (bez VAT) od:

  40.45 €～

  Standardowa data wysyłki:

  8 dni robocze

  Konfiguruj
• 

  KYOUIKU GEAR MFG（KG）

  Helical Gear m1 SUS304 Type

  Helical gear made from SUS304 for excellent corrosion resistance. As helix angle is 45°, can be used for both helical gear (parallel axis) and screw gear (crossed axis). Directly mountable tapped in 2 points, machined product also available.

  Czytaj dalej

  CAD:

  2D

  Module	Environmentally Friendly	Number of Teeth(Teeth)	Properties / applications	Material	Twisting Direction	Heat Treatment	Ground Tooth	Surface Treatment
  1	-	13 ～ 26	-	Stainless Steel	Right / Left	Not Provided	Not Provided	Not Provided

  Cena (bez VAT) od:

  39.36 €～

  Standardowa data wysyłki:

  8 dni robocze

  Konfiguruj
• 

  KYOUIKU GEAR MFG（KG）

  Helical Gear m1.5 SUS304 Type

  Helical gear made from SUS304 for excellent corrosion resistance. As helix angle is 45°, can be used for both helical gear (parallel axis) and screw gear (crossed axis). Directly mountable tapped in 2 points, machined product also available.

  Czytaj dalej

  CAD:

  2D

  Module	Environmentally Friendly	Number of Teeth(Teeth)	Properties / applications	Material	Twisting Direction	Heat Treatment	Ground Tooth	Surface Treatment
  1.5	-	13 ～ 26	-	Stainless Steel	Right	Not Provided	Not Provided	Not Provided

  Cena (bez VAT) od:

  55.74 €～

  Standardowa data wysyłki:

  8 dni robocze

  Konfiguruj
• 

  • ZNIŻKA
  • Volume Discount

  AOKI SEIMITSU KOGYO

  Helical Gear ES

  Allowable torque is larger than that of a spur gear of the same size, and tooth contact sound is also quiet.

  Czytaj dalej

  Module	Environmentally Friendly	Number of Teeth(Teeth)	Properties / applications	Material	Twisting Direction	Heat Treatment	Ground Tooth	Surface Treatment
  3	-	15	-	General Steel Material	Right	Not Provided	Provided	Black Oxide

  Cena (bez VAT) od:

  28.01 €

  Cena specjalna

  Standardowa data wysyłki:

  Towar dostępny w magazynie: 1 dzień roboczy

  Możliwa wysyłka tego samego dnia

  Konfiguruj
• 

  • ZNIŻKA
  • Volume Discount

  KYOUIKU GEAR MFG（KG）

  Helical Gear m1 S45C Type

  Helical gear with induction hardening performed on teeth part. As helix angle is 45°, can be used for both helical gear (parallel axis) and screw gear (crossed axis). Directly mountable tapped in 2 points, machined product also available.

  Czytaj dalej

  CAD:

  2D

  Module	Environmentally Friendly	Number of Teeth(Teeth)	Properties / applications	Material	Twisting Direction	Heat Treatment	Ground Tooth	Surface Treatment
  1	-	13 ～ 26	-	General Steel Material	Right / Left	High Frequency	Not Provided	Not Provided

  Cena (bez VAT) od:

  12.71 €～

  Cena specjalna

  Standardowa data wysyłki:

  Towar dostępny w magazynie: 1 dzień roboczy

  Niektóre pozycje mogą zostać wysłane tego samego dnia

  Konfiguruj
• 

  • Volume Discount

  KOHARA GEAR INDUSTRY

  Stainless Steel Screw Gear

  Stainless steel spiral gears are prone to wear and galling, so different combinations of materials are recommended.

  Czytaj dalej

  CAD:

  2D

  /3D

  Module	Environmentally Friendly	Number of Teeth(Teeth)	Properties / applications	Material	Twisting Direction	Heat Treatment	Ground Tooth	Surface Treatment
  1 ～ 3	-	10 ～ 20	-	Stainless Steel	Right / Left	Not Provided	Not Provided	Not Provided

  Cena (bez VAT) od:

  25.40 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount

  KOHARA GEAR INDUSTRY

  Plastic Screw Gear

  Employing lightweight MC901 material, this screw gear can even be used without lubrication. Prone to wear and galling, so different combinations of materials are recommended.

  Czytaj dalej

  CAD:

  2D

  /3D

  Module	Environmentally Friendly	Number of Teeth(Teeth)	Properties / applications	Material	Twisting Direction	Heat Treatment	Ground Tooth	Surface Treatment
  1.5 ～ 3	-	10 ～ 20	-	Resin	Right / Left	Not Provided	Not Provided	Not Provided

  Cena (bez VAT) od:

  18.39 €～

  Standardowa data wysyłki:

  Towar dostępny w magazynie: 1 dzień roboczy

  Niektóre pozycje mogą zostać wysłane tego samego dnia

  Konfiguruj
• 

  KYOUIKU GEAR MFG（KG）

  Helical Gear m1.5 Blue (Polyacetal)

  Ideal for preventing contamination in food/packaging equipment, as the blue color of the POM stands out against food ingredients.

  Czytaj dalej

  Module	Environmentally Friendly	Number of Teeth(Teeth)	Properties / applications	Material	Twisting Direction	Heat Treatment	Ground Tooth	Surface Treatment
  1.5	-	10 ～ 26	-	Resin	Right / Left	Not Provided	Not Provided	Not Provided

  Cena (bez VAT) od:

  17.41 €～

  Standardowa data wysyłki:

  8 dni robocze

  Konfiguruj