Universal Joints
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Promotional pricing
Universal Joints / Keyway / Set Screw
MISUMI
[Features] No machining of the bolt hole is required on the shaft, only machining of the keyway for tightening.- Volume Discount
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 5.04 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Universal Joints / Set Pin
MISUMI
[Features] This is a coupling where the connection angle can be changed freely.- Volume Discount
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 5.04 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Universal joints with friction bearing
GANTER
The permissible r.p.m. of universal joints with friction bearing DIN 808 is to a large extent dependent on the type of application such as load, duration, angular disposition as well as lubrication . For over 1000 r.p.m. universal joints with needle bearing should be used
For continuous use ample lubrication is essential. This achieved by fitting the joint with a grease filled gaiter GN 808.1.- Volume Discount
Configure nowStarting from∗ ： 37.36 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Universal joint shafts with needle bearing
GANTER
Universal joint shafts with needle bearing GN 808.3 do not only bridge the misaligenment of two shafts, they also provide a length compensation which, in turn, allows the appropriate extraction length l2 as factor of the total length l1. The power transmission is achive-bed by two universal joints DIN 808 (type EW) a splined shaft and a sliding sleeve.
It is important to check the accuracy when connecting the splined shaft to the sliding sleeve.
The markings -> <- have to be opposite to each other. Any kind of misconnection leads to an inhomogeneous output and to a quick abrasion.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 474.82 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing
Precision Shaft Fitting - Correction Type UA-C Series
SAKAI MANUFACTURING
Ideal for high precision and highly responsive control.
[Features]
· With high performance and double bolt clamp specification, suitable for high precision, highly responsive control.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 42.53 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
![Encoder Type Coupling - Set Screw Type [SFC]](//uk.misumi-ec.com/linked/material/mech/SGL1/PHOTO/SFC.jpg?$product_view_b$)
Encoder Type Coupling - Set Screw Type [SFC]
SUNGIL
[Features]
· Can simultaneously absorb large allowable deviation angles, eccentricity and end play.
· Impacts and vibration completely absorbed.
· Oil-free, low moment of inertia.- Volume Discount
Configure nowStarting from∗ ： 17.24 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Join Slide SPS Series
MIYOSHI KIKAI
SPS (spline shaft), SPA / SPO (spline sleeve) is made of: S-45C material. Use on the sliding part during rotation.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 28.76 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Universal joints single with plain bearing, DIN 808 (23403)
NORELEM
· For transmission of torques with different working angles
· Swivelling by 45°
· HardenedConfigure nowStarting from∗ ： 32.79 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Universal joint shafts with friction bearing
GANTER
Universal joint shafts with friction bearing GN 808.2 not only join the offset between two shafts, but also enable the alignment of lengths, which depending on the overall length l1 enables the corresponding extraction length l2. The power transmission is achieved by two universal joints DIN 808 (type EG) a splined shaft and a sliding sleeve.
It is important to check the accuracy when connec-ting the splined shaft to the sliding sleeve:
The markings -> <- have to be opposite to each other. Any kind of misconnection leads to an inhomogeneous output and to a quick abrasion.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 286.60 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Standard Type Wear-Resistant HJ Series
MIYOSHI KIKAI
[Features]
· With total hardening treatment for increased fatigue strength.
· Additional machining cannot be performed on the hardened product.
· To extend life, boots and oil pack should be used.
· When shaft hole is T-shaped, please indicate new JIS key, or previous JIS key.
· With key groove processing, the strong pins and joint pins are not included.- Volume Discount
Configure nowStarting from∗ ： 46.97 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Standard Type Miniature Type M Series
MIYOSHI KIKAI
High precision for small diameter use. In order to improve wear resistance, has been treated with S45C nitride composite processing.- Volume Discount
Configure nowStarting from∗ ： 59.17 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
- Promotional pricing
Universal joints for ordinary applications
GANTER
Universal joints GN 9080 are a simple and very competitively priced variant.
They can only be used for applications with low revolutions. Typical applications are all types of manual operations such as the adjustment of louvers.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 13.72 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Cardan shafts telescopic (23412)
NORELEM
· For transmission of torques with different working angles
· For compensation of large length differences
· Suitable for short-term drives with low speed
· Can be supplied in every desired lengthConfigure nowStarting from∗ ： 115.74 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
- Promotional pricing
Bearing Type with Shaft KL Series, KF Series, KFD Series
MIYOSHI KIKAI
[Features] Universal connection for light torques and high speeds. -Flange is not included.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 169.96 € Special price Min. Shipping Days ： 12 Days *Unit price with basic configuration
-
Joint Power Type with Hex Shaft B-GX Series
MIYOSHI KIKAI
[Features]
· Shaft can be freely cut at any point.
· Expansion / contraction range is large for broad range of installations.- Volume Discount
Configure nowStarting from∗ ： 156.37 € Min. Shipping Days ： 11 Days *Unit price with basic configuration
-
- Promotional pricing
Configure nowStarting from∗ ： 72.77 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
![Universal Joint Coupling - Set Screw Type [SCJ]](//uk.misumi-ec.com/linked/material/mech/SGL1/PHOTO/221005339689.jpg?$product_view_b$)
Universal Joint Coupling - Set Screw Type [SCJ]
SUNGIL
Clamping type product suitable for use in cases where shaft and shaft are located away from each other, or when the angle of the shaft is great. SUNGIL Inc. is a Korean manufacturer established in 1991. Korean coupling market share is 70%, with over 3,000 customers. No1 maker. Rich selection, and short lead-times.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 29.40 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Universal joints with needle bearing
GANTER
The permissible r.p.m. of universal joints with needle bearings DIN 808 is higher than for those with friction bearings, but is still dependent on the load, duration of use as well as angular disposition. Ideal applications allow speeds of up to 4000 r.p.m.
Needle bearings give the universal joints at 3° to 5° angular disposition a considerably higher degree of efficiency than those fitted with friction bearings. The needle bearings have a permanent lubrication and thus do not require servicing.
Infomation regarding the selection of universal joints with needle bearing.- Volume Discount
Configure nowStarting from∗ ： 74.90 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Universal joints single with plain bearing, robust version DIN 808 (23409)
NORELEM
· For transmission of torques with different working angles
· Suitable for short-term drives with low speed
· Swivelling by 35°Configure nowStarting from∗ ： 10.96 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Standard Type Wear-Resistant HJD Series
MIYOSHI KIKAI
[Features]
· With total hardening treatment for increased fatigue strength.
· Additional machining cannot be performed on the hardened product.
· When shaft hole is T-shaped, please indicate new JIS key, or previous JIS key.
· With key groove processing, the strong pins and joint pins are not included.- Volume Discount
Configure nowStarting from∗ ： 93.72 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 123.78 € Min. Shipping Days ： 11 Days *Unit price with basic configuration
-
Joint Stainless Steel Type with Spline Shaft HS-P Series
MIYOSHI KIKAI
[Features] Rotation and sliding can be transmitted simultaneously. [Material] EN 1.4301 Equiv. (sintered).- Volume Discount
Configure nowStarting from∗ ： 315.23 € Min. Shipping Days ： 11 Days *Unit price with basic configuration
-
Universal joints single with needle bearing, DIN 808 (23406)
NORELEM
· For transmission of torques with different working angles
· Low play
· Universal joint groundConfigure nowStarting from∗ ： 105.64 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
- Promotional pricing
Paraflex CPE / CPU Model
MIKI PULLEY
High rigidity with high precision pin and dry metal to minimize backlash.
[Features]
· The rigidity of each component is very high, and backlash extremely small due to high precision pin and dry metal.
· As it is universal type, the shaft reaction force due to installation error is extremely small.
· With damping effect due to sliding friction surface of pin and dry metal.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 68.55 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Standard Type Precision S Series
MIYOSHI KIKAI
Holes for the spring pins included can be machined in the l/2 position simultaneously with the shaft.
· To extend life, boots and oil pack should be used.
· When the shaft hole shape is B or T, please indicate new JIS key, or previous JIS key.
· With key groove processing, the spring pins are not included.- Volume Discount
Configure nowStarting from∗ ： 71.21 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Configure now
Starting from∗ ： 63.07 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
Standard Type Power Type B Series
MIYOSHI KIKAI
[Features]
· Holes for spring pins included can be machined in the l/2 position simultaneously with the shaft.
· To extend life, boots and oil pack should be used.
· When the shaft hole shape is B or T, please indicate new JIS key, or previous JIS key.
· With key groove processing, the spring pins are not included.- Volume Discount
Configure nowStarting from∗ ： 35.03 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Join Slide SPSS Series
MIYOSHI KIKAI
SPSS (spline shaft), SPAS / SPOS (spline sleeve) is made of: S-45C material.
[Features]
· Please note the effective spline size for sleeve and shaft cutting.
· Use on the sliding part during rotation.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 85.84 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 207.16 € Min. Shipping Days ： 11 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 174.24 € Min. Shipping Days ： 11 Days *Unit price with basic configuration
-
Joint Power Type with Spline Shaft B-PS Series
MIYOSHI KIKAI
[Features]
· P series are short-lead, easy order type.
· Comprising of 2 standard joints (SPS, and join slide SPA).
· In the case of the standard product, since the joint and the join slide are not set on delivery, once the full length dimension is decided, use the spring pin provided to set for use (HJ-P uses joint pin instead of spring pin ).
· When setting, please ensure symmetry of left / right joint assembly.
· Please note, if set incorrectly, output shaft speed will become uneven.- Volume Discount
Configure nowStarting from∗ ： 402.11 € Min. Shipping Days ： 11 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 182.21 € Min. Shipping Days ： 20 Days *Unit price with basic configuration
-
- Promotional pricing
![Universal Joint Coupling - Clamping Type [SCJA]](//uk.misumi-ec.com/linked/material/mech/SGL1/PHOTO/SCJ.jpg?$product_view_b$)
Universal Joint Coupling - Clamping Type [SCJA]
SUNGIL
Clamping type product suitable for use in cases where shaft and shaft are located away from each other, or when the angle of the shaft is great. SUNGIL Inc. is a Korean manufacturer established in 1991. Korean coupling market share is 70%, with over 3,000 customers. No1 maker. Rich selection.Configure nowStarting from∗ ： 31.84 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Universal joints with friction bearing, Stainless Steel
GANTER
Since the moveable parts are not surface treated, i.e. not case hardened, the possibilities of application of these universal joints are much more limited compared to the ones made of standard steel. Therefore, the guide lines for the selection of universal joints with friction bearing according to the diagram may be applied at a limited extent only. Rotational speeds over 200 min may become critical.
For continuous use of the Stainless Steel-Universal joints, ample lubrication is very important. This achieved by fitting the joint with a grease filled gaiter GN 808.1.
The order example refers to universal joints with equal bores both ends d2 and s.- Volume Discount
Configure nowStarting from∗ ： 109.96 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Standard Type Power Type BD Series
MIYOSHI KIKAI
[Features]
· High torque normal use.
· Material: S45C
· Holes for the spring pins included can be machined in the l/2 position simultaneously with the shaft.
· To extend life, boots and oil pack should be used.
· When the shaft hole shape is B or T, please indicate new JIS key, or previous JIS key.
· With key groove processing, spring pin is not included.- Volume Discount
Configure nowStarting from∗ ： 69.97 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 244.72 € Min. Shipping Days ： 11 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 178.97 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 369.90 € Min. Shipping Days ： 11 Days *Unit price with basic configuration
-
- Promotional pricing
Flex Shaft (No Tube)
SHOWA SPRING
Low power / high speed can be changed for transmission freely in the desired direction.- Volume Discount
Configure nowStarting from∗ ： 32.90 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Configure now
Starting from∗ ： 341.53 € Min. Shipping Days ： 20 Days *Unit price with basic configuration
-
- Promotional pricing
Universal Joint Coupling - Clamping Long Type
SUNGIL
Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. A Korean manufacturer established in 1991. Korean coupling market share is 70%, with over 3,000 customers. No1 maker. Rich selection, and short lead-times.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 36.73 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
DIN 71752 Yokes
REYHER
[Specifications]
・Body Material: Steel
・Surface treatment： zinc plated
・Shaft Bore Dia. (machined) D1(Ø): 6-20
・Overall Length W(mm): 12-64
Fork joints, for spring flap bolts (article 88752)- Volume Discount
Configure nowStarting from∗ ： 2.16 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Quick- fit couplings with radial off-set compensation / Steel / M6-M20 / GN 240.1
GANTER
Quick-fit couplings GN 240.1 have been designed for the purpose of compensating a radial shaft off-set (x). A typical application is the axial link to a piston rod of a cylinder operating in any type of fixture or system.
The coupling is not designed for the transfer of torque.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 76.36 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Quick- fit couplings with radial off-set compensation / Steel / M6-M20 / GN 240
GANTER
Quick-fit couplings GN 240 have been designed for the purpose of compensating a radial shaft off-set (x). A typical application is the axial link to a piston rod of a cylinder operating in any type of fixture or system.
The coupling is not designed for the transfer of torque.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 54.76 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Universal joints double with plain bearing, robust version DIN 808 (23410)
NORELEM
· For transmission of torques with different working angles
· Suitable for short-term drives with low speed
· Swivelling by 70°Configure nowStarting from∗ ： 22.60 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
![Encoder Type Coupling - Set Screw Type [SFC]](http://uk.misumi-ec.com/linked/material/mech/SGL1/PHOTO/SFC.jpg?$product_view_b$)
![Universal Joint Coupling - Set Screw Type [SCJ]](http://uk.misumi-ec.com/linked/material/mech/SGL1/PHOTO/221005339689.jpg?$product_view_b$)
![Universal Joint Coupling - Clamping Type [SCJA]](http://uk.misumi-ec.com/linked/material/mech/SGL1/PHOTO/SCJ.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Type |
| Allowable Torque Range(N•m) |
| Shaft Bore Dia. (machined) D1(Ø) |
| Shaft Bore Dia. (machined) D2(Ø) |
| Outer Dia. A(Ø) |
| Overall Length W(mm) |
| Max. Rotational Speed Range(r/min) |
| Feature |
| Body Material |
| Application |
| Allowable Torque(N•m) |
| Max. Rotational Speed(r/min) |
| Allowable Lateral Misalignment Range(mm) |
| Allowable Lateral Misalignment(mm) |
| Allowable Angular Misalignment(deg) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | GANTER | GANTER | SAKAI MANUFACTURING | SUNGIL | MIYOSHI KIKAI | NORELEM | GANTER | MIYOSHI KIKAI | MIYOSHI KIKAI | GANTER | NORELEM | MIYOSHI KIKAI | MIYOSHI KIKAI | MIGHTY | SUNGIL | GANTER | NORELEM | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | NORELEM | MIKI PULLEY | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIGHTY | SUNGIL | GANTER | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | MIYOSHI KIKAI | SHOWA SPRING | MIGHTY | SUNGIL | REYHER | GANTER | GANTER | NORELEM |
| Product Series | Universal joints single with plain bearing, robust version DIN 808 (23409) | Universal joints single with needle bearing, DIN 808 (23406) | Quick- fit couplings with radial off-set compensation / Steel / M6-M20 / GN 240.1 | Quick- fit couplings with radial off-set compensation / Steel / M6-M20 / GN 240 | Universal joints double with plain bearing, robust version DIN 808 (23410) | ||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||
| Starting from∗ | 5.04 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 5.04 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 37.36 € *Unit price with basic configuration Volume Discount | 474.82 € *Unit price with basic configuration Volume Discount | 42.53 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 17.24 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 28.76 € *Unit price with basic configuration Volume Discount | 32.79 € *Unit price with basic configuration | 286.60 € *Unit price with basic configuration Volume Discount | 46.97 € *Unit price with basic configuration Volume Discount | 59.17 € *Unit price with basic configuration Volume Discount | 13.72 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 115.74 € *Unit price with basic configuration | 169.96 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 156.37 € *Unit price with basic configuration Volume Discount | 72.77 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 29.40 € Special price *Unit price with basic configuration Promotional pricing | 74.90 € *Unit price with basic configuration Volume Discount | 10.96 € *Unit price with basic configuration | 93.72 € *Unit price with basic configuration Volume Discount | 123.78 € *Unit price with basic configuration Volume Discount | 315.23 € *Unit price with basic configuration Volume Discount | 105.64 € *Unit price with basic configuration | 68.55 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 71.21 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 63.07 € *Unit price with basic configuration Volume Discount | 35.03 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 85.84 € *Unit price with basic configuration Volume Discount | 207.16 € *Unit price with basic configuration Volume Discount | 174.24 € *Unit price with basic configuration Volume Discount | 402.11 € *Unit price with basic configuration Volume Discount | 182.21 € *Unit price with basic configuration Volume Discount | 31.84 € Special price *Unit price with basic configuration Promotional pricing | 109.96 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 69.97 € *Unit price with basic configuration Volume Discount | 244.72 € *Unit price with basic configuration Volume Discount | 178.97 € *Unit price with basic configuration Volume Discount | 369.90 € *Unit price with basic configuration Volume Discount | 32.90 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 341.53 € *Unit price with basic configuration Volume Discount | 36.73 € Special price *Unit price with basic configuration Promotional pricing | 2.16 € *Unit price with basic configuration Volume Discount | 76.36 € *Unit price with basic configuration Volume Discount | 54.76 € *Unit price with basic configuration Volume Discount | 22.60 € *Unit price with basic configuration |
| Min. Shipping Days | Same day | Same day | 7 Days | 7 Days | Same day | Same day | 8 Days | 4 Days | 7 Days | 5 Days | 8 Days | Same day | 4 Days | 12 Days | 11 Days | Same day | Same day | 7 Days | 4 Days | 8 Days | 11 Days | 11 Days | 4 Days | Same day | Same day | 5 Days | Same day | 8 Days | 11 Days | 11 Days | 11 Days | 20 Days | Same day | Same day | 8 Days | 11 Days | 8 Days | 11 Days | Same day | 20 Days | Same day | Same day | 7 Days | 7 Days | 4 Days |
| Specifications |
|
| |||||||||||||||||||||||||||||||||||||||||||
| Type | Others / Standard Type | Others / Standard Type | - | - | Standard Type | - | Shaft Type | - | - | Standard Type | Standard Type | - | - | Shaft Type | Shaft Type | Standard Type | Standard Type | - | - | Standard Type | Shaft Type | Shaft Type | - | Standard Type | Standard Type | Standard Type | Standard Type | Shaft Type | Shaft Type | Shaft Type | Shaft Type | Standard Type | - | - | Standard Type | Shaft Type | Shaft Type | Shaft Type | Flexible Type | Standard Type | Standard Type | With Slit | - | - | - |
| Allowable Torque Range(N•m) | 20.01 to 50.00 ～ 50.01 to 100.00 | 5.01 to 10.00 ～ 100 to Less Than 500 | - | - | 0.05 to 1.00 ～ 10.01 to 20.00 | 1.01 to 3.00 | - | 5.01 to 10.00 ～ 100 to Less Than 500 | - | - | - | - | - | - | - | 0.05 to 1.00 ～ 1.01 to 3.00 | 0.05 to 1.00 ～ 3.01 to 5.00 | - | 3.01 to 5.00 ～ 100 to Less Than 500 | - | - | - | 5.01 to 10.00 ～ 100 to Less Than 500 | 0.05 to 1.00 ～ 20.01 to 50.00 | - | - | - | - | - | - | - | 0.05 to 1.00 ～ 5.01 to 10.00 | 0.05 to 1.00 ～ 3.01 to 5.00 | - | - | - | - | - | 0.05 to 1.00 ～ 1.01 to 3.00 | 0.05 to 1.00 ～ 5.01 to 10.00 | 0.05 to 1.00 ～ 3.01 to 5.00 | - | - | - | 3.01 to 5.00 ～ 100 to Less Than 500 |
| Shaft Bore Dia. (machined) D1(Ø) | 8 ～ 30 | 6 ～ 30 | 6 ～ 32 | 10 ～ 30 | 3 ～ 20 | 4 ～ 16 | 5 ～ 38 | 16 ～ 50 | 10 ～ 30 | 6 ～ 30 | 2 ～ 5.5 | B 8 ～ B 20 | 16 ～ 32 | - | 6 ～ 30 | 2 ～ 10 | 3 ～ 15 | 10 ～ 32 | 13 ～ 50 | 6 ～ 30 | 6 ～ 30 | 6 ～ 20 | 20 ～ 70 | 3 ～ 22 | 6 ～ 60 | 6 ～ 30 | 6 ～ 60 | 6 ～ 25 | 6 ～ 30 | 6 ～ 30 | 20 ～ 60 | 2.5 ～ 14 | 3 ～ 15 | 6 ～ 25 | 6 ～ 60 | 8 ～ 30 | 6 ～ 30 | 10 ～ 30 | - | 2.5 ～ 14 | 3 ～ 15 | 6 ～ 20 | - | - | 13 ～ 50 |
| Shaft Bore Dia. (machined) D2(Ø) | - | - | - | - | 3 ～ 20 | 4 ～ 16 | - | - | - | - | - | - | - | - | - | 2 ～ 10 | 3 ～ 15 | - | - | - | - | - | - | 3 ～ 22 | - | - | - | - | - | - | - | - | 3 ～ 15 | - | - | - | - | - | - | - | 3 ～ 15 | - | - | - | - |
| Outer Dia. A(Ø) | 19 ～ 36 | 12 ～ 51 | 16 ～ 58 | 22 ～ 58 | 15 ～ 55 | 29 ～ 54 | 5 ～ 35 | - | 22 ～ 58 | 12 ～ 51 | 6 ～ 10 | 13 ～ 32 | - | 36 ～ 118 | 12 ～ 60 | 7.1 ～ 17.5 | 15 ～ 40 | 22 ～ 58 | - | 12 ～ 51 | 12 ～ 60 | 12.5 ～ 40 | - | 19 ～ 46 | 16 ～ 115 | 12.5 ～ 57 | 12 ～ 120 | 6 ～ 22 | 12.5 ～ 57 | 16 ～ 58 | 40 ～ 120 | 5.6 ～ 47.8 | 15 ～ 40 | 16 ～ 50 | 12 ～ 120 | 18 ～ 58 | 12 ～ 51 | 20 ～ 60 | - | 5.6 ～ 47.8 | 15 ～ 40 | - | - | - | - |
| Overall Length W(mm) | 42 ～ 139 | 31 ～ 139 | - | - | 18 ～ 58 | 28 ～ 59 | - | 34 ～ 104 | - | 31 ～ 122 | 15 ～ 30 | - | 230 ～ 420 | 72 ～ 326 | 162~270 ～ 553~711 | 27.2 ～ 89.8 | 22.2 ～ 45.6 | - | 42 ～ 132 | 49.5 ～ 195 | 168.5~266.5 ～ 556~1185 | 148.5~252 ～ 335~842 | 48 ～ 140 | 19.4 ～ 54 | 34 ～ 220 | 40 ～ 165 | 50 ～ 300 | - | 131~250 ～ 517~685 | 136.5~244 ～ 444~1095 | 324~806 ～ 760~1312 | 25.4 ～ 66.6 | 22.2 ～ 45.6 | - | 75 ～ 485 | 132~245 ～ 397~599 | 105~232 ～ 399~599 | 219~450 ～ 556~1188.5 | 150 ～ 300 | 38.1 ～ 130 | 24.2 ～ 51 | 12 ～ 64 | - | - | 60 ～ 188 |
| Max. Rotational Speed Range(r/min) | - | - | - | - | 4,001 to 10,000 | 2001 to 4,000 | - | - | - | 1,001 to 2,000 ～ 301 to 1,000 | 301 to 1,000 | - | - | - | - | 4,001 to 10,000 | 4,001 to 10,000 ～ 10,001 to 78,000 | - | - | 1,001 to 2,000 ～ 301 to 1,000 | - | - | - | 4,001 to 10,000 ～ 2001 to 4,000 | 1,001 to 2,000 ～ 2001 to 4,000 | 1,001 to 2,000 ～ 301 to 1,000 | 1,001 to 2,000 ～ 301 to 1,000 | - | - | - | - | - | 4,001 to 10,000 ～ 2001 to 4,000 | - | 1,001 to 2,000 ～ 301 to 1,000 | - | - | - | - | - | 4,001 to 10,000 ～ 10,001 to 78,000 | - | - | - | - |
| Feature | - | - | - | - | High Torsional Rigidity ～ Low Moment of Inertia | - | - | - | - | - | Small | - | - | - | High Torque | High Accuracy ～ No Backlash | Heat Resistant ～ Small | - | - | - | High Torque | - | - | High Accuracy ～ Small | High Accuracy ～ Small | High Accuracy ～ High Durability | High Torque | - | High Accuracy ～ High Durability | High Accuracy ～ Small | High Torque | High Accuracy ～ No Backlash | - | - | High Torque | High Accuracy ～ Small | - | - | - | High Accuracy ～ No Backlash | Heat Resistant ～ Small | - | - | - | - |
| Body Material | Steel | Steel | - | - | Aluminum | Steel | Steel | Steel | - | - | Steel | - | Steel | - | Steel | Resin | Aluminum | - | Steel | - | Steel | Stainless Steel | Steel | Aluminum | - | - | Steel | Stainless Steel | - | - | Steel | Stainless Steel | Aluminum Alloy | Stainless Steel | Steel | - | - | Steel | Steel | Stainless Steel | Aluminum | Steel | - | - | Steel |
| Application | Standard | Standard | - | - | Standard / Servo Motor / Stepping Motor / Encoder | - | Standard | - | - | Standard | Standard | - | - | Standard | Standard | Standard / Servo Motor / Stepping Motor / Encoder | Servo Motor | - | - | Standard | Standard | Standard | - | Standard / Servo Motor / Stepping Motor | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard / Servo Motor / Stepping Motor / Encoder | - | - | Standard | Standard | Standard | Standard | Standard | Standard / Servo Motor / Stepping Motor / Encoder | Servo Motor | Standard | - | - | - |
| Allowable Torque(N•m) | 20.1 ～ 175 | 5.3 ～ 495 | - | - | 0.25 ～ 20 | 0.12 ～ 1.5 | - | 7 ～ 210 | - | - | - | - | - | - | - | 0.08 ～ 1.6 | 0.25 ～ 5 | - | 4 ～ 180 | - | - | - | 10 ～ 360 | 0.4 ～ 25 | - | - | - | - | - | - | - | 0.11 ～ 8.5 | 0.25 ～ 5 | - | - | - | - | - | 0.392 ～ 1.862 | 0.11 ～ 8.5 | 0.25 ～ 5 | - | - | - | 4 ～ 180 |
| Max. Rotational Speed(r/min) | - | - | - | - | 6000 | 3000 | - | - | - | 500 ～ 1800 | 700 ～ 1000 | - | - | - | - | 10000 | 7000 ～ 21000 | - | - | 380 ～ 1400 | - | - | - | 3000 ～ 6000 | 280 ～ 2100 | 510 ～ 2000 | 220 ～ 1700 | - | - | - | - | - | 7000 ～ 21000 | - | 160 ～ 1300 | - | - | - | - | - | 5000 ～ 18000 | - | - | - | - |
| Allowable Lateral Misalignment Range(mm) | - | - | - | - | 0.02 to 0.2 | 1.1 to 3.0 | - | - | - | - | - | - | - | - | - | 5.1 to 100 | 0.21 to 0.40 ～ 0.41 to 1.0 | - | - | - | - | - | - | 0.02 to 0.2 ～ 0.41 to 1.0 | - | - | - | - | - | - | - | - | 0.21 to 0.40 ～ 0.41 to 1.0 | - | - | - | - | - | - | - | 0.21 to 0.40 | - | - | - | - |
| Allowable Lateral Misalignment(mm) | - | - | - | - | 0.2 | 2 ～ 3 | - | - | - | - | - | - | - | - | - | 5.6 ～ 15.5 | 0.3 ～ 0.5 | - | - | - | - | - | - | 0.2 ～ 0.5 | - | - | - | - | - | - | - | - | 0.3 ～ 0.5 | - | - | - | - | - | - | - | 0.3 ～ 0.5 | - | - | - | - |
| Allowable Angular Misalignment(deg) | - | - | - | - | 1 | 10 ～ 12 | - | - | - | - | - | - | - | - | - | 45 ～ 90 | 3 | - | - | - | - | - | - | 1 ～ 4 | - | - | - | - | - | - | - | 20 ～ 30 | 3 | - | - | - | - | - | - | 20 ～ 30 | 7 | - | - | - | - |
![Encoder Type Coupling - Set Screw Type [SFC]](http://uk.misumi-ec.com/linked/material/mech/SGL1/PHOTO/SFC.jpg?$product_view_c$)
![Universal Joint Coupling - Set Screw Type [SCJ]](http://uk.misumi-ec.com/linked/material/mech/SGL1/PHOTO/221005339689.jpg?$product_view_c$)
![Universal Joint Coupling - Clamping Type [SCJA]](http://uk.misumi-ec.com/linked/material/mech/SGL1/PHOTO/SCJ.jpg?$product_view_c$)
Loading...
Filter by:
Stock
-
- Show only stock items
-
Type
-
Allowable Torque Range(N•m)
-
Shaft Bore Dia. (machined) D1(Ø)
-
Shaft Bore Dia. (machined) D2(Ø)
-
Outer Dia. A(Ø)
-
Overall Length W(mm)
- 9
- 12
- 15
- 16
- 18
- 19.1
- 19.4
- 20
- 22.2
- 23.4
- 24
- 24.2
- 25.4
- 26.4
- 27
- 27.2
- 28
- 28.5
- 30
- 30.4
- 31
- 32
- 33.4
- 34
- 34.9
- 35
- 35.3
- 35.6
- 36
- 37.6
- 38.1
- 39
- 40
- 41.4
- 41.7
- 42
- 43
- 44
- 44.5
- 45
- 45.6
- 46.2
- 48
- 49.5
- 50
- 50.8
- 50.9
- 51
- 51.4
- 52
- 52.4
- 53.3
- 54
- 54.1
- 56
- 58
- 59
- 60
- 61.2
- 62
- 62.1
- 63.5
- 64
- 65
- 66.6
- 67.5
- 67.6
- 68
- 69.7
- 70
- 71
- 72
- 73
- 73.2
- 74
- 75
- 75.5
- 76
- 76.2
- 80
- 81
- 82
- 83
- 84
- 86
- 87
- 88
- 89.8
- 90
- 92
- 94
- 94.5
- 95
- 96
- 98.6
- 100
- 102
- 104
- 105
- 105~232
- 108
- 112
- 117.5
- 120
- 122
- 122~237
- 124
- 125
- 126
- 127
- 128
- 129
- 130
- 130.5~238
- 131~250
- 132
- 132~245
- 134
- 136~269
- 136.5~244
- 139
- 140
- 143
- 144
- 144~275
- 145
- 147.5~402
- 148.5~252
- 149
- 150
- 153
- 155.5~409
- 156
- 158
- 160
- 162~270
- 163
- 163~265
- 164
- 164~283
- 165
- 167
- 168
- 168~287
- 168.5~266.5
- 175
- 175.5~423.5
- 176~297
- 178
- 179~418
- 180
- 180~277
- 180.5~423.5
- 182
- 185~423
- 187.5~433
- 188
- 190
- 192
- 192~360
- 194~309
- 195
- 198~366
- 200
- 206
- 207~440
- 212
- 212~321
- 212~440
- 219~373
- 219~450
- 220
- 220~547
- 224~325
- 224~551
- 228
- 230
- 231~458
- 233~331
- 238
- 241~391
- 242~561
- 244~404
- 248
- 248~567
- 250
- 257~575
- 259~403
- 260
- 262~580
- 264~351
- 265~577
- 268~584.5
- 269~422
- 270
- 270~444
- 275
- 283~593
- 284~454
- 288~599
- 290
- 294~794
- 295~602
- 298
- 299~436
- 300
- 305~535
- 307~533
- 310
- 312~808.5
- 316~480
- 318~621.5
- 319~811
- 324~806
- 326
- 329~819
- 330~451
- 335~842
- 340
- 340~1018
- 343~638.5
- 345~575
- 349~581
- 350
- 353~1036
- 355~842
- 355~1040
- 360~1034
- 380~500
- 383~528
- 388~528
- 390
- 395~1065
- 397~599
- 399~599
- 399~617
- 401~1072
- 403~878
- 403~880.5
- 407~605
- 420
- 425~1094
- 426
- 434~645
- 437~1101
- 441~645
- 444~1094
- 444~1095
- 458~1095
- 465~1122
- 465~1125.5
- 485
- 517~685
- 520~1136
- 530~1164
- 546~711
- 553~711
- 556~1185
- 556~1188.5
- 588~1182
- 650~1223
- 690~1255
- 760~1312
-
Max. Rotational Speed Range(r/min)
-
Feature
-
Body Material
-
Application
-
Allowable Torque(N•m)
-
Max. Rotational Speed(r/min)
-
Allowable Lateral Misalignment Range(mm)
-
Allowable Lateral Misalignment(mm)
-
Allowable Angular Misalignment(deg)
Brand
CAD data type
-
- 2D
- 3D
Examples how you can use these components
Categories related to Universal Joints
Metody płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.