Transmissions, Reducers

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 12 Days or Less 14 Days or Less 19 Days or Less 20 Days or Less

?* Information on days to ship and prices

Bevel Gearbox

ABP ANTRIEBSTECHNIK

High-quality bevel gears with minimised gear backlash for small and medium power ranges, plain bearings of sintered bronze

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	72.72 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

KG Gearbox, B-SET

KYOUIKU GEAR MFG（KG）

Economy type compact bevel gear set. Shaft diameter ø4~. Choose from speed ratios 1: 1 and 1: 2. Both sides are mounting reference surfaces, and drilled hole machining has been applied to the body to facilitate quick mounting.
Drilled holes can also be used as pilot holes. Plastic cover included.

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	83.50 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

TB Type Spiral Bevel Gearbox

MAKISHINKO

Small bevel gearbox that is lightweight, low noise, and high efficiency with free mounting direction

Volume Discount

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	197.90 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

KG Gearbox, B-BOX

KYOUIKU GEAR MFG（KG）

High-precision and compact bevel gearbox. Choose from speed ratios 1: 1 and 1: 2. Abundant lineup of shaft diameters available, from ø3 to ø25. The full surface is the reference surface, and there are no restrictions on the mounting direction.
Can be mounted quickly thanks to its screw hole machining, already completed. Lubricated with grease and maintenance-free.

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	116.54 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Worm Gear Units KES 30

MAEDLER

Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.
Center distance 30 mm, in 8 ratios.
Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.
Worm shaft in vertically position not recommended for continuous operation.
Gearing: Worm from steel, wheel from special brass.
Bearing: Ball bearings with rubber seal RS.
Lubrication: Maintenance free grease lubrication.
Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.
Life time: approx. 1,000 hours at max. performance at speed 500 min^-1 and operating time 20%, at +20°C.
Permissable operating temperature: -20° to +60°C.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	266.58 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Promotional pricing

KG Gearbox, W-BOX

KYOUIKU GEAR MFG（KG）

High-precision and compact worm gearbox. Shaft diameter ø5~. Choose from an abundant selection of reduction ratios, from 1: 10 to 1: 50. The full surface is the reference surface, and there are no restrictions on the mounting direction.
Can be mounted quickly thanks to its screw hole machining, already completed. Lubricated with lubricating oil.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	216.18 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

SB Type Spiral Bevel Gearbox

MAKISHINKO

Silent, powerful and robust bevel gearbox with abundant selectable shaft arrangements that can be used for a wide range of applications

Volume Discount

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	530.85 €
Min. Shipping Days ：	14 Days

*Unit price with basic configuration

KG Gearbox, HY-BOX

KYOUIKU GEAR MFG（KG）

High-precision and compact hypoid gearbox. Shaft diameter ø6~. Choose from speed ratios 1: 5 and 1: 10. The full surface is the reference surface, and there are no restrictions on the mounting direction.
Can be mounted quickly thanks to its drilled hole machining, already completed. Lubricated with grease and maintenance-free.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	341.02 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

MAL Series High-Efficiency Worm Reduction Gear

MAKISHINKO

[Features]
· Lightweight
Aluminum die-cast product body provides a 45% weight reduction in comparison to previous cast-iron models, with improved strength and performance.
　· Compact and high-capacity
Approximately 200% increase in product case surface area significantly improves rated heat capacity (compared to previous models)
· Extensive lineup
Extensive lineup caters to any need, with hollow output, solid output, dual input shaft, motors included, etc.

Select to compare

Configure now
Starting from^∗ ：	379.05 €
Min. Shipping Days ：	20 Days

*Unit price with basic configuration

Bevel Gearboxes HUG, Ratio 1:1

MAEDLER

General: Miniaturised right-angle drives for light duty.
Suitable for manual and short term drive applications.
Housing: Gear cases are injection moulded in filled polyamide 6.6 for low moisture take up, low thermal expansion, high rigidity.
Electrical insulating. Shafts hardened and ground.
Gearing: straight teeth, max. backlash 2º. Speed max. 1,000min^-1.
Version A: with steel bevel gears, bonded onto the shafts.
Version B: with polyacetal bevel gears, moulded onto the shafts.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	49.77 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

FB Type Straight Bevel Gearbox

MAKISHINKO

Small and lightweight bevel gearbox with sturdy design optimal for agricultural machinery and industrial machinery

Volume Discount

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	363.17 €
Min. Shipping Days ：	14 Days

*Unit price with basic configuration

Bevel Box L Type KBX

KOHARA GEAR INDUSTRY

High-efficiency aluminum die cast compact L type bevel BOX that uses carburized spiral bevel gears to reduce noise. Lubricated with high-grade grease. Maintenance-free.

Volume Discount

Stock

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	152.07 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Angular Drive OW3, Ratio 1:1, Version 30 R

MAEDLER

Material: Housing made from zinc die-cast ZnAI4Cu1.
Shafts made from stainless steel 1.4301 (AISI 304), dismountable. Bevel gears from polyacetal resin, injection-moulded.
• Open angular gear drive, ratio 1:1, 3 versions, 6 sizes.
• Suitable for lower torques and intermittend use.
• Shafts running directly in the self-lubricating housing material.
• Easy to mount and maintenance-free.
Shaft angle = 90º. Number of teeth = 16/16.
Temperature range - 20°C to +100º C.

Version 30 R: Two shafts with two bevel gears.
On the long, straight-through shaft, the bevel gear is at the right side, refered to the short shaft. The shaft for the power input and it's sense of rotation can be chosen freely.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	45.56 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Miniature Bevel Gearboxes MKU Model L

MAEDLER

Miniature angular gear unit for particularly high loads and long service life. Very robust construction, as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available in ratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.

General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire.
Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceutic industry and with grease lubrication.
Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces.The diameters c, l₁ and l₂ are provided for use as alignment studs.
Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.
Bearing: Life time min. 15,000h.
Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.

Model L: Straight-through output shaft, slowly turning.

Permiss. Ambient temperature -10°C to +90°C.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	316.14 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Miniature Bevel Gearboxes MKU Model H

MAEDLER

Miniature angular gear unit for particularly high loads and long service life. Very robust construction, as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available in ratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.

General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire.
Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceutic industry and with grease lubrication.
Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces.The diameters c, l₁ and l₂ are provided for use as alignment studs.
Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.
Bearing: Life time min. 15,000h.
Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.

Model H: Straight-through output hollow shaft, slowly turning.

Permiss. Ambient temperature -10°C to +90°C.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	334.06 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Worm Gear Units KES 15

MAEDLER

Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.
Center distance 15 mm, in 5 ratios.
Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position. Worm shaft in vertically position not recommended for continuous operation.
Gearing: Worm from steel, wheel from special brass.
Bearing: Ball bearings with rubber seal RS.
Lubrication: Maintenance free grease lubrication.
Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.
Life time: approx. 1,000 hours at max. performance at speed 500 min^-1 and operating time 20%, at +20ºC.
Permissable operating temperature: -20° to +60°C.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	196.91 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Worm Gear Units KES 20

MAEDLER

Angular drives with hollow output shaft for high torques at very low dimensions. Suitable in a wide variety of applications.
Center distance 20 mm, in 7 ratios.
Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.
Worm shaft in vertically position not recommended for continuous operation.
Gearing: Worm from steel, wheel from special brass.
Bearing: Ball bearings with rubber seal RS.
Lubrication: Maintenance free grease lubrication.
Angular backlash: 1°+/-0,5°. Operating time: 20% at 5 min.
Life time: approx. 1,000 hours at max. performance at speed 500 min^-1 and operating time 20%, at +20ºC.
Permissable operating temperature: -20° to +60°C.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	210.95 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Bevel Gearboxes KEK Version A

MAEDLER

Angular drives with high torques at very low dimensions.
Suitable in a wide variety of applications
8 Sizes. Ratio 1:1.
Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.
Gearing: Bevel gears from steel, surface hardened.
Bearing: Ball bearings with rubber seal RS.
Lubrication: Maintenance free grease lubrication.
Angular backlash: 3°+/-1°.
Operating time: 20% at 5 min.
Life time: 1,000 hours at max. performance at speed 500 min^-1 and operating time 20%.
Permissable operating temperature: -20° to +60°C.

* Not according to DIN 6885.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	122.15 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Bevel Gearboxes KEK Version B

MAEDLER

Angular drives with high torques at very low dimensions.
Suitable in a wide variety of applications
8 Sizes. Ratio 1:1.

Housing: Aluminium, silver anodized. Sealed against lubricant leaks, protected against dust. Can be mounted in any position.
Gearing: Bevel gears from steel, surface hardened.
Bearing: Ball bearings with rubber seal RS.
Lubrication: Maintenance free grease lubrication.
Angular backlash: 3°+/-1°.
Operating time: 20% at 5 min.
Life time: 1,000 hours at max. performance at speed 500 min^-1 and operating time 20%.
Permissable operating temperature: -20° to +60°C.

* Not according to DIN 6885.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	168.91 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

S Series, B Type

MAKISHINKO

Standard worm reducer with superior results and abundant valuations

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	277.77 €
Min. Shipping Days ：	20 Days

*Unit price with basic configuration

Miniature Bevel Gearboxes MKU Model K

MAEDLER

Miniature angular gear unit for particularly high loads and long service life. Very robust construction, as with the larger gearboxes KU/I. Gear unit size 035 with housing edge length 35mm is available in ratio i=1:1. The gearbox size 045 with a housing edge length of 45mm provides it in translation i=1:1 to 4:1.

General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire.
Also Available in corrosion-proof, NO-TOX version for the food processing and pharmaceutic industry and with grease lubrication.
Housing: Housing and flanges made of aluminium, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces.The diameters c, l₁ and l₂ are provided for use as alignment studs.
Gearing: Hardened bevel gears, lapped in pairs , Angular backlash max. 0,5°.
Bearing: Life time min. 15,000h.
Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. The gearboxes have no venting.

Model K: Input side C: Transmission ratio for gearing down.

Permiss. Ambient temperature -10°C to +90°C.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	316.14 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Bevel Gearboxes DZA Model H, Size 2

MAEDLER

General data: Gearbox with hollow shaft on the output side.
Ratio either 1 : 1 or 2 : 1 or 3 : 1. Any mounting position possible.
The maximum input speed (hollow shaft as input device) for gearing up is 750 min^-1 at 2 : 1 and 500 min^-1 at 3 : 1.
Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof.
Gearing: Spiral teeth, hardened.
Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings.
Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.
Angular backlash: 15 to 30 angular minutes.
Permissable operating temperature: -18ºC to +80ºC.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	454.84 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Bevel Gearboxes DZA, Version B

MAEDLER

General data: 4 sizes.
Ratio either 1 : 1 or 2 : 1. Any mounting position possible.
Ratio for gearing up to max. 750 min^-1 possible.
Housing: Thick-walled, one-piece cast aluminium housing, fully oil-tight and dust-proof.
Gearing: Spiral teeth, hardened.
Shafts/bearing system: Input and output shaft are ground and mounted on ball bearings. From size 2 with keyways.
Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.
Angular backlash: 15 to 30 angular minutes.
Permissable operating temperature: -18ºC to +80ºC.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	180.35 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Bevel Gearboxes DZA, Version A

MAEDLER

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	174.53 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Worm drives (22700)

NORELEM

· Smooth and quiet power transmission

· Simple screw fastening

· 7 ratios from 13:1 to 65:1

· Housing sealed to prevent grease leakage and keep dust out

· Direction of rotation on the shaft is arbitrary

Select to compare

Configure now
Starting from^∗ ：	243.29 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

S Series, W Type

MAKISHINKO

Standard worm reducer with superior results and abundant valuations

Volume Discount

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	277.77 €
Min. Shipping Days ：	20 Days

*Unit price with basic configuration

Bevel Box T Type KBX

KOHARA GEAR INDUSTRY

[Features]
· High-efficiency aluminum die cast compact T type bevel BOX that uses carburized spiral bevel gears to reduce noise.
· Lubricated with high-grade grease. Maintenance-free.

Stock

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	164.00 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Bevel Gearboxes DZR, Stainless Steel, Version A

MAEDLER

General data: High resistance to corrosion.
4 sizes.
Ratio either 1 : 1 or 2 : 1. Any mounting position possible.
Ratio for gearing up to max. 750 min^-1 possible.
Housing: Stainless steel 1.4401 (V4A / AISI 316). Thick-walled, one-piece housing, fully oil-tight and dust-proof.
Gearing: Spiral teeth, hardened.
Shafts/bearing system: Stainless steel 1.4401 (V4A / AISI 316), ground and mounted on ball bearings. From size 2 with keyways.
Lubrication/maintenance: Lubricated for life, viscosity ISO VG 150. Gearboxes are maintenance free.
Angular backlash: 15 to 30 angular minutes.
Permissable operating temperature: -18ºC to +80ºC.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	627.37 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Bevel Gearboxes DZR, Stainless Steel, Version B

MAEDLER

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	667.48 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Angular Drive OW2, Ratio 1:1, with Polyketone Bevel Gears

MAEDLER

Material: Housing made from zinc die-cast ZnAI4Cu1.
Shafts made from stainless steel 1.4301 (AISI 304), dismountable.
Bevel gears from polyketone resin, injection-moulded.
• Low cost angular gear drive, ratio 1:1, 6 sizes.
• Suitable for lower torques and intermittend use.
• Shafts running directly in the self-lubricating housing material.
• Easy to mount and maintenance-free.
Polyketone: Lower friction,much larger lifespan. Much higher safety against tooth breaking.
Shaft angle = 90º. Temperature range - 20°C to +100º C.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	42.38 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Angular Drive OW3, Ratio 1:1, Version 20

MAEDLER

Material: Housing made from zinc die-cast ZnAI4Cu1.
Shafts made from stainless steel 1.4301 (AISI 304), dismountable. Bevel gears from polyacetal resin, injection-moulded.
• Open angular gear drive, ratio 1:1, 3 versions, 6 sizes.
• Suitable for lower torques and intermittend use.
• Shafts running directly in the self-lubricating housing material.
• Easy to mount and maintenance-free.
Shaft angle = 90º. Number of teeth = 16/16.
Temperature range - 20°C to +100º C.

Version 20: Three shafts with three bevel gears.
Two shafts are in line and have an opposite sense of rotation. The shaft for the power input and it's sense of rotation be chosen freely.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	45.56 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Worm drive compact (22700-12)

NORELEM

· Maintenance-free

· Housing die-cast zinc.

· Hardened steel worm screw and worm wheel

· 5 different ratios

· Centre distance 14 mm

Select to compare

Configure now
Starting from^∗ ：	104.81 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Bevel Box L Type CBX

KOHARA GEAR INDUSTRY

Tough bevel box with high-grade cast iron case and tapered roller bearings. With the high-efficiency L type bevel box that uses carburized spiral bevel gears to reduce noise, 16 paths can be chosen by positioning the shaft. Lubricated with high-grade lubricant.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	723.55 €
Min. Shipping Days ：	19 Days

*Unit price with basic configuration

Bevel Box T Type CBX

KOHARA GEAR INDUSTRY

Tough bevel box with high-grade cast iron case and tapered roller bearings. With the high-efficiency L type bevel box that uses carburized spiral bevel gears to reduce noise, 8 paths can be chosen by positioning the shaft. Lubricated with high-grade lubricant.

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	1,458.81 €
Min. Shipping Days ：	19 Days

*Unit price with basic configuration

Bevel Gearboxes DZA Model H, Size 3

MAEDLER

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	656.24 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Angular Drive OW3, Ratio 1:1, Version 30 L

MAEDLER

Material: Housing made from zinc die-cast ZnAI4Cu1.
Shafts made from stainless steel 1.4301 (AISI 304), dismountable. Bevel gears from polyacetal resin, injection-moulded.
• Open angular gear drive, ratio 1:1, 3 versions, 6 sizes.
• Suitable for lower torques and intermittend use.
• Shafts running directly in the self-lubricating housing material.
• Easy to mount and maintenance-free.
Shaft angle = 90º. Number of teeth = 16/16.
Temperature range - 20°C to +100º C.

Version 30 L: Two shafts with two bevel gears.
On the long, straight-through shaft, the bevel gear is at the left side, refered to the short shaft. The shaft for the power input and it's sense of rotation can be chosen freely.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	45.56 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Worm drives (22700-10)

NORELEM

· Maintenance-free

· Housing die-cast zinc.

· Hardened steel worm screw and worm wheel

· 4 different ratios

· Centre distance 25 mm

Select to compare

Configure now
Starting from^∗ ：	116.17 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

S Series, K Type

MAKISHINKO

Standard worm reducer with superior results and abundant valuations

Volume Discount

2D CAD data available

Select to compare

Configure now
Starting from^∗ ：	293.46 €
Min. Shipping Days ：	20 Days

*Unit price with basic configuration

Angular Drive OW2, Ratio 1:1, with Polyacetal Bevel Gears

MAEDLER

Material: Housing made from zinc die-cast ZnAI4Cu1.
Shafts made from stainless steel 1.4301 (AISI 304), dismountable.
Bevel gears from polyacetal resin, injection-moulded.
• Low cost angular gear drive, ratio 1:1, 6 sizes.
• Suitable for lower torques and intermittend use.
• Shafts running directly in the self-lubricating housing material.
• Easy to mount and maintenance-free.
Polyacetal: Standard quality with high hardness.
Shaft angle = 90º. Temperature range - 20°C to +100º C.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	32.82 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days
Specifications
Mounting Division
Type
Reduction Ratio
Shaft Diameter(φ)
The presence or absence of motor
Output shaft type

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	ABP ANTRIEBSTECHNIK	KYOUIKU GEAR MFG（KG）	MAKISHINKO	KYOUIKU GEAR MFG（KG）	MAEDLER	KYOUIKU GEAR MFG（KG）	MAKISHINKO	KYOUIKU GEAR MFG（KG）	MAKISHINKO	MAEDLER	MAKISHINKO	KOHARA GEAR INDUSTRY	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAEDLER	MAKISHINKO	MAEDLER	MAEDLER	MAEDLER	MAEDLER	NORELEM	MAKISHINKO	KOHARA GEAR INDUSTRY	MAEDLER	MAEDLER	MAEDLER	MAEDLER	NORELEM	KOHARA GEAR INDUSTRY	KOHARA GEAR INDUSTRY	MAEDLER	MAEDLER	NORELEM	MAKISHINKO	MAEDLER
Product Series	Bevel Gearbox	KG Gearbox, B-SET	TB Type Spiral Bevel Gearbox	KG Gearbox, B-BOX	Worm Gear Units KES 30	KG Gearbox, W-BOX	SB Type Spiral Bevel Gearbox	KG Gearbox, HY-BOX	MAL Series High-Efficiency Worm Reduction Gear	Bevel Gearboxes HUG, Ratio 1:1	FB Type Straight Bevel Gearbox	Bevel Box L Type KBX	Angular Drive OW3, Ratio 1:1, Version 30 R	Miniature Bevel Gearboxes MKU Model L	Miniature Bevel Gearboxes MKU Model H	Worm Gear Units KES 15	Worm Gear Units KES 20	Bevel Gearboxes KEK Version A	Bevel Gearboxes KEK Version B	S Series, B Type	Miniature Bevel Gearboxes MKU Model K	Bevel Gearboxes DZA Model H, Size 2	Bevel Gearboxes DZA, Version B	Bevel Gearboxes DZA, Version A	Worm drives (22700)	S Series, W Type	Bevel Box T Type KBX	Bevel Gearboxes DZR, Stainless Steel, Version A	Bevel Gearboxes DZR, Stainless Steel, Version B	Angular Drive OW2, Ratio 1:1, with Polyketone Bevel Gears	Angular Drive OW3, Ratio 1:1, Version 20	Worm drive compact (22700-12)	Bevel Box L Type CBX	Bevel Box T Type CBX	Bevel Gearboxes DZA Model H, Size 3	Angular Drive OW3, Ratio 1:1, Version 30 L	Worm drives (22700-10)	S Series, K Type	Angular Drive OW2, Ratio 1:1, with Polyacetal Bevel Gears
CAD	3D		2D				2D				2D	2D / 3D														2D	2D / 3D						2D / 3D	2D / 3D				2D
Starting from^∗	72.72 € *Unit price with basic configuration Volume Discount	83.50 € *Unit price with basic configuration Volume Discount	197.90 € *Unit price with basic configuration Volume Discount	116.54 € *Unit price with basic configuration Volume Discount	266.58 € *Unit price with basic configuration Volume Discount	216.18 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	530.85 € *Unit price with basic configuration Volume Discount	341.02 € *Unit price with basic configuration Volume Discount	379.05 € *Unit price with basic configuration	49.77 € *Unit price with basic configuration Volume Discount	363.17 € *Unit price with basic configuration Volume Discount	152.07 € *Unit price with basic configuration Volume Discount	45.56 € *Unit price with basic configuration Volume Discount	316.14 € *Unit price with basic configuration Volume Discount	334.06 € *Unit price with basic configuration Volume Discount	196.91 € *Unit price with basic configuration Volume Discount	210.95 € *Unit price with basic configuration Volume Discount	122.15 € *Unit price with basic configuration Volume Discount	168.91 € *Unit price with basic configuration Volume Discount	277.77 € *Unit price with basic configuration Volume Discount	316.14 € *Unit price with basic configuration Volume Discount	454.84 € *Unit price with basic configuration Volume Discount	180.35 € *Unit price with basic configuration Volume Discount	174.53 € *Unit price with basic configuration Volume Discount	243.29 € *Unit price with basic configuration	277.77 € *Unit price with basic configuration Volume Discount	164.00 € *Unit price with basic configuration	627.37 € *Unit price with basic configuration Volume Discount	667.48 € *Unit price with basic configuration Volume Discount	42.38 € *Unit price with basic configuration Volume Discount	45.56 € *Unit price with basic configuration Volume Discount	104.81 € *Unit price with basic configuration	723.55 € *Unit price with basic configuration	1,458.81 € *Unit price with basic configuration	656.24 € *Unit price with basic configuration Volume Discount	45.56 € *Unit price with basic configuration Volume Discount	116.17 € *Unit price with basic configuration	293.46 € *Unit price with basic configuration Volume Discount	32.82 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	5 Days	Same day	5 Days	5 Days	4 Days	Same day	14 Days	5 Days	20 Days	4 Days	14 Days	5 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	20 Days	4 Days	4 Days	4 Days	4 Days	4 Days	20 Days	5 Days	4 Days	4 Days	4 Days	4 Days	4 Days	19 Days	19 Days	4 Days	4 Days	4 Days	20 Days	4 Days
Specifications		Stock		Stock								Stock															Stock
Mounting Division	-	No Leg	With Leg	No Leg	-	No Leg	With Leg	No Leg	No Leg	-	No Leg	Flange	-	-	-	-	-	-	-	With Leg	-	-	-	-	-	With Leg	Flange	-	-	-	-	-	Flange With Leg	Flange With Leg	-	-	-	With Leg	-
Type	-	Bevel gear	Bevel gear	Bevel gear	Worm Gear	Worm Gear	Bevel gear	Other	Worm Gear	Bevel gear	Bevel gear	Bevel gear	-	Bevel gear	Bevel gear	Worm Gear	Worm Gear	Bevel gear	Bevel gear	Worm Gear	Bevel gear	Bevel gear	Bevel gear	Bevel gear	Worm Gear	Worm Gear	Bevel gear	Bevel gear	Bevel gear	-	-	Worm Gear	Bevel gear	Bevel gear	Bevel gear	-	Worm Gear	Worm Gear	-
Reduction Ratio	-	1 ～ 2	1 ～ 2	1 ～ 2	-	10 ～ 50	1 ～ 2	5 ～ 10	30 ～ 60	-	1 ～ 2	1 ～ 2	-	-	-	-	-	-	-	10 ～ 60	-	-	-	-	-	10 ～ 60	1 ～ 2	-	-	-	-	-	1 ～ 2	2	-	-	-	10 ～ 60	-
Shaft Diameter(φ)	-	4 ～ 12	11 ～ 19	3 ～ 25	-	5 ～ 8	19 ～ 50	6 ～ 12	25 ～ 30	-	19 ～ 38	10 ～ 20	-	-	-	-	-	-	-	17 ～ 32	-	14	8 ～ 25	8 ～ 25	-	17 ～ 32	10 ～ 20	8 ～ 25	8 ～ 25	-	-	-	18 ～ 40	32 ～ 40	19	-	-	17 ～ 55	-
The presence or absence of motor	-	N/A	N/A	N/A	-	N/A	N/A	N/A	N/A	-	N/A	N/A	-	-	-	-	-	-	-	N/A	-	-	-	-	-	N/A	N/A	-	-	-	-	-	N/A	N/A	-	-	-	N/A	-
Output shaft type	-	Solid	Solid	Solid / Hollow	-	Solid	Solid	Solid	Solid	-	Solid	Solid	-	-	-	-	-	-	-	Solid	-	-	-	-	-	Solid	Solid	-	-	-	-	-	Solid	Solid	-	-	-	Solid	-