Bearing Components（Page 2）

243

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

Felt strips / Aluminium borosilicate / 8.5mm

SKF

[Specifications]
・Material: Aluminium borosilicate
・Width: 8.5mm

Felt strips, and their high-temperature variants made of aluminium borosilicate, provide a simple and effective sealing solution. They accommodate relatively high shaft speeds, because a small gap forms between the felt strip and the shaft, transforming the seal into a non-contact, gap-type seal. Felt strips should be cut to the correct length and soaked in hot oil prior to being installed

[Features]
・Cost-effective
・Suitable for relatively high shaft speeds

Select to compare

Configure now
Min. Shipping Days ：	Quote

Lock washers / Steel / Internal diameter 10~280mm

SKF

[Specifications]
・Internal diameter(mm): 10~280
・Outer diameter(mm): 21~362
・Width(mm): 1~3
・eClass code: 23-11-07-05

MB and MBL lock washers are locking devices, used to secure KM, KML and HM .. T lock nuts onto a shaft or adapter sleeve and prevent unintentional loosening. MB .. A is a stronger version of the MB washer. The lock washers engage a keyway in the shaft or adapter sleeve thread. They lock the nut in position when one of the washer tabs is bent into one of the slots in the outside diameter of the lock nut. A new lock washer should be used each time the corresponding lock nut is installed.

[Features]
・Simple, stable and reliable fastening element
・Easy to install and remove
・Used for KM, KML, and HM .. T lock nuts

Select to compare

Configure now
Starting from^∗ ：	0.87 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Plummer block housings CBL Series / Cast iron / Internal diameter 100~160mm

SNR

[Specifications]
・Material: Cast iron
・Internal diameter(mm): 100~160

Split Plummer Blocks made of grey- or ductile cast iron for through shaft or shaft end.

Select to compare

Configure now
Min. Shipping Days ：	4 Days

Bearing Components / Internal diameter 15.926~400mm

SKF

[Specifications]
・Internal diameter(mm): 15.926~400
・Outer diameter(mm): 42~360

Select to compare

Configure now
Min. Shipping Days ：	4 Days

Plummer block housings / Cast iron

SNR

[Specifications]
・Material: Cast iron

Split SN-bearing housings made of ductile- or grey cast iron with several sealing options.

Select to compare

Configure now
Starting from^∗ ：	53.79 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Needle thrust washer

NADELLA

[Specifications]
・Inner dimension(mm): 5-40.1
・Outer dimension(mm): 12.4-59.5
・Width(mm): 0.8-3

CP Thrust Plate, Thin/Thick Series.

Select to compare

Configure now
Starting from^∗ ：	1.70 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Flanged Housings F5..-B-L, Square, for Bearings with Tapered Bore and Adapter Sleeve, with Felt Seals, for Grease Lubrication

FAG

[Specifications]
・Inner Diameter(mm): 65~100
・Outer Diameter(mm): 130~200
・Width(mm): 104~137

Flanged housing for various bearing types, with conical bore and clamping sleeve, continuous shaft

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	272.51 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Lock Washer

FAG

[Specifications]
・Outer Diameter(mm): 30~160
・Width(mm): 1.12~3.1

Lock Washer.

Volume Discount

Select to compare

Configure now
Min. Shipping Days ：	4 Days

Three-Hole Flanged Housing GG.CFTR.., Cast Iron, for Radial Insert Ball Bearings

INA

Three-Hole Flanged Housing GG.CFTR.., Cast Iron, for Radial Insert Ball Bearings.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	14.88 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Taking-up Housing Units GG.HE.., Cast Iron, for Radial Insert Ball Bearings

INA

Taking-up Housing Units GG.HE.., Cast Iron, for Radial Insert Ball Bearings.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	17.02 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Taking-up Housing Units GG.SFT.., Cast Iron, for Radial Insert Ball Bearings

INA

Taking-up Housing Units GG.SFT.., Cast Iron, for Radial Insert Ball Bearings.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	14.67 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Four-bolt Flanged Housing GG.CF.., Square, Cast Iron, for Radial Insert Ball Bearings

INA

Four-bolt Flanged Housing GG.CF.., Square, Cast Iron, for Radial Insert Ball Bearings.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	8.02 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Four-bolt Flanged Housing GG.FE.., Round, Cast Iron, for Radial Insert Ball Bearings

INA

[Specifications]
・Internal diameter d(mm): 51.987~109.985

Four-bolt Flanged Housing GG.FE.., Round, Cast Iron, for Radial Insert Ball Bearings.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	14.67 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Axial Dics

SKF

[Specifications]
・Inner dimension(mm): 6-160
・Outer dimension(mm): 19-200
・Width(mm): 1
・Material: Spring steel hardened

Accessories thin universal washers.

[Features]
・1mm thick
・Made of spring steel and hardened
・Can be used as shaft or housing washers for needle roller thrust bearings in the AXK series
・Can be used as shaft washers for bearings in the AXW series
・Can be used to provide a cost-effective bearing solution, if adjacent machine component are not hardened, but have adequate stiffness and the requirements to geometrical tolerances are moderate

Select to compare

Configure now
Starting from^∗ ：	0.72 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Shaft Washer, Inner Centerable

SKF

[Specifications]
・Internal diameter(mm): 15~90
・Outer diameter(mm): 28~120
・eClass code: 23-05-09-03

Shaft washers for cylindrical and needle roller thrust bearings are supplied as separate components. They are made of hardened carbon chromium bearing steel and have a precision-ground raceway surface and a ground bore. The washers can be combined with roller and cage thrust assemblies and housing washers to create complete bearings. SKF recommends using WS washers for high-speed applications where accurate centring of the washers is required.

[Features]
・Enable full interchangeability of shaft washers
・Suitable for high-speed applications
・Suitable where accurate centring of washers is required
・811 series washers are available for needle roller thrust bearings

Select to compare

Configure now
Starting from^∗ ：	8.97 €
Min. Shipping Days ：	17 Days

*Unit price with basic configuration

Inner Ring for Shell Type Needle Roller Bearing

IKO

· No oil hole

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	5.87 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Housing locating washers GS894, to DIN 616/ ISO 104, housing locating

INA

[Specifications]
・Internal Diameter(φ): 62~174
・Outer Diameter(φ): 130~340

Axial cylindrical roller bearings 894, single direction, comprising K894, GS, WS.

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	251.03 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Promotional pricing

Inner rings IR..-IS1, precision machined, with lubrication hole, to DIN 620

INA

[Specifications]
・Internal Diameter(φ): 6~50
・Outer Diameter(φ): 10~60

Inner rings IR..-IS1, precision machined, with lubrication hole, to DIN 620.

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	5.55 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

L-section ring

FAG

[Specifications]
・Inner Diameter(mm): 45~320.08
・Outer Diameter(mm): 71.4~375.4
・Width(mm): 10~36

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	79.57 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Seating washer

FAG

[Specifications]
・Inner Diameter(mm): 20~180
・Outer Diameter(mm): 30~225
・Width(mm): 3.5~22

Axial deep groove ball bearings Single direction.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	11.97 €
Min. Shipping Days ：	2 Days

*Unit price with basic configuration

Shaft locating washers WS812, to DIN 616 / ISO 104, shaft locating

INA

[Specifications]
・Internal Diameter(φ): 30~300
・Outer Diameter(φ): 52~415

Axial cylindrical roller bearings 812, single direction, comprising K812, GS, WS.

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	14.15 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Tab washers MBL, main dimensions to DIN 5406

FAG

[Specifications]
・Inner Diameter(mm): 120~200
・Outer Diameter(mm): 151~248
・Width(mm): 2, 2.5

Tab washers MBL, main dimensions to DIN 5406.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	25.75 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Locating rings / Internal diameter 82mm

SKF

[Specifications]
・Inside diameter: 82 mm
・Outside diameter: 90 mm
・eClass code:
・23-05-17-90

A bearing in the locating position must be secured axially in the housing. If the bearing seat in the housing and the bearing width do not match, locating (stabilizing) rings are required. Typically, two locating rings are required per housing. One ring should be placed on each side of the bearing. If only one locating ring is required, it should be installed on the same side as the lock nut.

Select to compare

Configure now
Starting from^∗ ：	6.42 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Shim washers / Width 0.7mm

SKF

[Specifications]
・Width(mm): 0.7
・eClass code: 23-05-19-01

SKF Machinery Shims are used to easily and reliably adjust the height of a machine. High quality shims allow accurate and long lasting height adjustments that save time and support reliable operation of the machine. Shims are supplied in packs of 10 and can be used to refill SKF Machinery Shim kits (assortments of different shim sizes and thickness).

[Features]
・Easy to fit and remove
・Close tolerances for accurate adjustments
・Fully de-burred
・Supplied in packs containing 10 shims
・Thickness and size are clearly marked on the shim

Select to compare

Configure now
Starting from^∗ ：	22.12 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Plummer block housings / Cast iron, Steel stainless / Internal diameter 20~90mm

SNR

[Specifications]
・Material: Cast iron, Steel (stainless)
・Internal diameter(mm): 20~90

Split SN-bearing housings made of ductile- or grey cast iron with several sealing options.

Select to compare

Configure now
Starting from^∗ ：	35.17 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Plummer block housings BL Series

SNR

[Specifications]
・Material: Cast iron
・Internal diameter(mm): 150

Plummer Block Housings SNOE 200 for bearings with cylindrical bore specified for oil lubrication.

Select to compare

Configure now
Starting from^∗ ：	3,986.05 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Strip P10 Series / Maintenance-free. for dry-running applications / Internal diameter 250mm

PERMAGLIDE

[Specifications]
・Material: Lead-free, Leaded
・Internal diameter(mm): 250
・Outer diameter(mm): 500
・Width(mm): 0.99, 1.97, 2.46

KS PERMAGLIDE Strips PAS are available as an even material section. This material section can be used to make sliding elements in a variety of shapes.

Select to compare

Configure now
Starting from^∗ ：	115.05 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Inner rings / Without lubrication groove / No twist-free grinding / Internal diameter 7~95mm

ZEN

[Specifications]
・Lubrication hole: Without lubrication groove
・Surface: No twist-free grinding
・Internal diameter(mm): 7~95
・Outer diameter(mm): 10~105

Inner rings from ZEN.

Select to compare

Configure now
Starting from^∗ ：	1.60 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Locating rings / Internal diameter 101~350mm

SKF

[Specifications]
・Internal diameter(mm): 101~350
・Outer diameter(mm): 110~370
・eClass code: 23-05-17-90

A bearing in the locating position must be secured axially in the housing. If the bearing seat in the housing and the bearing width do not match, locating (stabilizing) rings are required. Typically, two locating rings are required per housing. One ring should be placed on each side of the bearing. If only one locating ring is required, it should be installed on the same side as the lock nut.

Select to compare

Configure now
Starting from^∗ ：	7.22 €
Min. Shipping Days ：	17 Days

*Unit price with basic configuration

Speedi-sleeves / Internal diameter 13.995~125mm

SKF

[Specifications]
・Internal diameter(mm): 13.995~125
・Outer diameter(mm): 103, 140
・eClass code: 23-05-92-90

SKF Speedi-Sleeve provides an alternative to costly repairs for worn or damaged shafts. This thin-walled sleeve, specially developed by SKF, is simply positioned over the relevant part of the shaft and provides a smooth counterface that is optimized for radial shaft seals. Use of SKF Speedi-Sleeve can prevent the need for costly shaft treatments that may involve machining, hardening, plunge grinding or disassembly. SKF Speedi-Sleeve Gold is an enhanced version of standard SKF Speedi-Sleeve, offering improved resistance to abrasive wear.[Features]
・Optimized countersurface
・Cost effective
・Well-proven solution

Select to compare

Configure now
Starting from^∗ ：	19.51 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Bearing Components P10 Series

PERMAGLIDE

[Specifications]
・Material: Leaded
・Internal diameter(mm): 18, 22, 48
・Outer diameter(mm): 32, 38, 74
・Width(mm): 1.5, 2

[Features]
・Absorbing and transferring axial forces coming from one direction
・Fixing moving components to each other
・Ensuring axial guidance accuracy over the entire service life
・P10 Series

Select to compare

Configure now
Starting from^∗ ：	1.67 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Thrust washer P10 Series / Maintenance-free. for dry-running applications / Internal diameter 32mm

PERMAGLIDE

[Specifications]
・Material: Leaded
・Internal diameter(mm): 32
・Outer diameter(mm): 54
・Width(mm): 1.5

[Features]
・Absorbing and transferring axial forces coming from one direction
・Fixing moving components to each other
・Ensuring axial guidance accuracy over the entire service life
・P10 Series

Select to compare

Configure now
Starting from^∗ ：	3.75 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

INA Axial Bearing Washers

INA

[Specifications]
・Internal diameter d(mm): 5~160
・External diameter D(mm): 15~200

Axial bearing washers, suitable for AXK and K811, to DIN 5405-3/ISO 303.

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	0.45 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Flanged Housings F5..-A-L, Square, for Bearings with Tapered Bore and Adapter Sleeve, with Felt Seals, for Grease Lubrication

FAG

[Specifications]
・Inner Diameter(mm): 65~100
・Outer Diameter(mm): 130~200
・Width(mm): 97~128

Flanged housing for various bearing types, with conical bore and clamping sleeve, closed on one side.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	272.51 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Flanged Housings F5..-D-B-L, Triangular, for Bearings with Tapered Bore and Adapter Sleeve, with Felt Seals, for Grease Lubrication

FAG

[Specifications]
・Inner Diameter(mm): 20~60
・Outer Diameter(mm): 52~120
・Width(mm): 55~79

Flanged housing for various bearing types, with conical bore and clamping sleeve, continuous shaft.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	61.29 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Tool for Railways Application

FAG

Mobile hydraulic device for mounting/dismounting of tapered or cylindrical roller bearing units in wheelset bearings of rail vehicles

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	865.22 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Take-Up Housing Unit GEHT..-GG, Cast Iron Housing

FAG

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	10.18 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Needle Roller, NRA Series, Type A, Rounded End

INA

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.05 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Thrust Washer, maintenance-free and low-maintenance, with Steel Backing

INA

Thrust washer, maintenance-free (..-Z) and low-maintenance (..-Y), material in accordance with ISO 3547-4, with steel backing

Select to compare

Configure now
Starting from^∗ ：	0.48 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Flanged Bearing Housing Unit GG.ME, Four-Bolt, Round

INA

Flanged Bearing Housing Unit GG.ME, Four-Bolt, Round.

Select to compare

Configure now
Starting from^∗ ：	82.26 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Flanged Housing Unit GEHLCTE..-GG, Two-Bolt, Oval

INA

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	8.51 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Take-Up Housing Unit GG.TUE, Cast Iron Housing

INA

Take-Up Housing Unit GG.TUE, Cast Iron Housing.

Select to compare

Configure now
Starting from^∗ ：	82.26 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Promotional pricing

Seal GD

NTN

[Features]
· Dedicated needle roller bearing seal with a small cross-section designed for needle roller bearings.
· Contact seal made of synthetic rubber reinforced via steel plate.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	3.42 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Needle Roller Cages for General Usage

IKO

[Features]
· Bearing with excellent rotational performance that guides the needle roller accurately.
[Uses]
· When combined with shafts and housing bores that are heat treated and accurately ground as raceway surfaces, needle roller cages for general usage are particularly useful in small spaces.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	6.10 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

L-Ball Dust Cover

IKO

[Features]
· L-balls are self-aligning rod-ends consisting of a special die-cast zinc alloy body and a studded ball which has its axis at right angles to the body.
[Uses]
· Widely used in link mechanism in construction machinery, farm and packaging machines, etc.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	4.08 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare
Brand	SKF	SKF	SNR	SKF	SNR	NADELLA	FAG	FAG	INA	INA	INA	INA	INA	SKF	SKF	IKO	INA	INA	FAG	FAG	INA	FAG	SKF	SKF	SNR	SNR	PERMAGLIDE	ZEN	SKF	SKF	PERMAGLIDE	PERMAGLIDE	INA	FAG	FAG	FAG	FAG	INA	INA	INA	INA	INA	NTN	IKO	IKO
Product Series	Felt strips / Aluminium borosilicate / 8.5mm	Lock washers / Steel / Internal diameter 10~280mm	Plummer block housings CBL Series / Cast iron / Internal diameter 100~160mm	Bearing Components / Internal diameter 15.926~400mm	Plummer block housings / Cast iron	Needle thrust washer	Flanged Housings F5..-B-L, Square, for Bearings with Tapered Bore and Adapter Sleeve, with Felt Seals, for Grease Lubrication	Lock Washer	Three-Hole Flanged Housing GG.CFTR.., Cast Iron, for Radial Insert Ball Bearings	Taking-up Housing Units GG.HE.., Cast Iron, for Radial Insert Ball Bearings	Taking-up Housing Units GG.SFT.., Cast Iron, for Radial Insert Ball Bearings	Four-bolt Flanged Housing GG.CF.., Square, Cast Iron, for Radial Insert Ball Bearings	Four-bolt Flanged Housing GG.FE.., Round, Cast Iron, for Radial Insert Ball Bearings	Axial Dics	Shaft Washer, Inner Centerable	Inner Ring for Shell Type Needle Roller Bearing	Housing locating washers GS894, to DIN 616/ ISO 104, housing locating	Inner rings IR..-IS1, precision machined, with lubrication hole, to DIN 620	L-section ring	Seating washer	Shaft locating washers WS812, to DIN 616 / ISO 104, shaft locating	Tab washers MBL, main dimensions to DIN 5406	Locating rings / Internal diameter 82mm	Shim washers / Width 0.7mm	Plummer block housings / Cast iron, Steel stainless / Internal diameter 20~90mm	Plummer block housings BL Series	Strip P10 Series / Maintenance-free. for dry-running applications / Internal diameter 250mm	Inner rings / Without lubrication groove / No twist-free grinding / Internal diameter 7~95mm	Locating rings / Internal diameter 101~350mm	Speedi-sleeves / Internal diameter 13.995~125mm	Bearing Components P10 Series	Thrust washer P10 Series / Maintenance-free. for dry-running applications / Internal diameter 32mm	INA Axial Bearing Washers	Flanged Housings F5..-A-L, Square, for Bearings with Tapered Bore and Adapter Sleeve, with Felt Seals, for Grease Lubrication	Flanged Housings F5..-D-B-L, Triangular, for Bearings with Tapered Bore and Adapter Sleeve, with Felt Seals, for Grease Lubrication	Tool for Railways Application	Take-Up Housing Unit GEHT..-GG, Cast Iron Housing	Needle Roller, NRA Series, Type A, Rounded End	Thrust Washer, maintenance-free and low-maintenance, with Steel Backing	Flanged Bearing Housing Unit GG.ME, Four-Bolt, Round	Flanged Housing Unit GEHLCTE..-GG, Two-Bolt, Oval	Take-Up Housing Unit GG.TUE, Cast Iron Housing	Seal GD	Needle Roller Cages for General Usage	L-Ball Dust Cover
CAD																2D / 3D	3D	3D			3D												3D											2D / 3D
Starting from^∗	-	0.87 € *Unit price with basic configuration	-	-	53.79 € *Unit price with basic configuration	1.70 € *Unit price with basic configuration	272.51 € *Unit price with basic configuration Volume Discount	- Volume Discount	14.88 € *Unit price with basic configuration Volume Discount	17.02 € *Unit price with basic configuration Volume Discount	14.67 € *Unit price with basic configuration Volume Discount	8.02 € *Unit price with basic configuration Volume Discount	14.67 € *Unit price with basic configuration Volume Discount	0.72 € *Unit price with basic configuration	8.97 € *Unit price with basic configuration	5.87 € *Unit price with basic configuration Volume Discount	251.03 € *Unit price with basic configuration Volume Discount	5.55 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	79.57 € *Unit price with basic configuration Volume Discount	11.97 € *Unit price with basic configuration Volume Discount	14.15 € *Unit price with basic configuration Volume Discount	25.75 € *Unit price with basic configuration Volume Discount	6.42 € *Unit price with basic configuration	22.12 € *Unit price with basic configuration	35.17 € *Unit price with basic configuration	3,986.05 € *Unit price with basic configuration	115.05 € *Unit price with basic configuration	1.60 € *Unit price with basic configuration	7.22 € *Unit price with basic configuration	19.51 € *Unit price with basic configuration	1.67 € *Unit price with basic configuration	3.75 € *Unit price with basic configuration	0.45 € *Unit price with basic configuration	272.51 € *Unit price with basic configuration Volume Discount	61.29 € *Unit price with basic configuration Volume Discount	865.22 € *Unit price with basic configuration Volume Discount	10.18 € *Unit price with basic configuration Volume Discount	0.05 € *Unit price with basic configuration Volume Discount	0.48 € *Unit price with basic configuration	82.26 € *Unit price with basic configuration	8.51 € *Unit price with basic configuration Volume Discount	82.26 € *Unit price with basic configuration	3.42 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	6.10 € *Unit price with basic configuration Volume Discount	4.08 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	Quote	12 Days	4 Days	4 Days	4 Days	4 Days	3 Days	4 Days	4 Days	4 Days	4 Days	4 Days	3 Days	12 Days	17 Days	5 Days	4 Days	Same day	3 Days	2 Days	3 Days	3 Days	12 Days	12 Days	4 Days	4 Days	4 Days	4 Days	17 Days	4 Days	4 Days	4 Days	5 Days	3 Days	3 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	4 Days	Same day	8 Days	8 Days