Bearing Components

248

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

1
2
3
4
5
Next >>

Recommendation

Speedi-sleeves / Internal diameter 12~201.63mm

SKF

[Specifications]
・Internal diameter(mm): 12~201.63
・Outer diameter(mm): 12.06~189.86
・eClass code: 23-05-92-90

SKF Speedi-Sleeve provides an alternative to costly repairs for worn or damaged shafts. This thin-walled sleeve, specially developed by SKF, is simply positioned over the relevant part of the shaft and provides a smooth counterface that is optimized for radial shaft seals. Use of SKF Speedi-Sleeve can prevent the need for costly shaft treatments that may involve machining, hardening, plunge grinding or disassembly. SKF Speedi-Sleeve Gold is an enhanced version of standard SKF Speedi-Sleeve, offering improved resistance to abrasive wear.

[Features]
・Optimized countersurface
・Cost effective
・Well-proven solution

Select to compare

Configure now
Min. Shipping Days ：	4 Days

Recommendation

Locating rings / Internal diameter 47~460mm

SKF

[Specifications]
・Internal diameter(mm): 47~460
・Outer diameter(mm): 52~1420
・Width(mm): 2~22
・eClass code: 23-05-17-90

A bearing in the locating position must be secured axially in the housing. If the bearing seat in the housing and the bearing width do not match, locating (stabilizing) rings are required. Typically, two locating rings are required per housing. One ring should be placed on each side of the bearing. If only one locating ring is required, it should be installed on the same side as the lock nut.

Select to compare

Configure now
Starting from^∗ ：	3.85 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Plummer block housings, split

FAG

[Specifications]
・Outer Diameter(φ): 52-550
・Width(mm): 70-235

Plummer block housings, SNV series, split type, for bearings with tapered bore and adapter sleeves, matic shaft.

Volume Discount

Select to compare

Configure now
Min. Shipping Days ：	3 Days

Needle rollers NRB, to DIN 5402-3/ ISO 3096, type B, end faces flat, profiled ends

INA

[Specifications]
・Outer Diameter(φ): 1-5

INA Needle rollers NRB, type B, end faces flat, profiled ends, DIN 5402-3/ ISO 3096

Volume Discount

Select to compare

Configure now
Min. Shipping Days ：	3 Days

Promotional pricing ends 30/11/2024

Tab washers MB, main dimensions to DIN 5406

FAG

[Specifications]
・Internal Diameter(φ): 10-280
・Outer Diameter(φ): 21-362

Tab washers MB are simple, reliable elements for securing smaller locknuts.

[Features]
・Tab washers have an inner tab and several outer tabs evenly spaced around the circumference
・The inner tab grips in the slot on the adapter sleeve or shaft, one of the outer tabs is bent into a slot in the nut for location
・The washers are made from steel and the tensile strength of the material is at least 300 N/mm2
・DIN 5406

Volume Discount

3D CAD data available

Select to compare

Configure now
	Special price
Min. Shipping Days ：	Same day

Promotional pricing ends 30/11/2024

Retaining Ring WR

NTN

A dedicated stop ring used when the track ring or retainer of a needle roller bearing is fixed in the axial direction, or guided.

[Features]
· Although the shape is the same as a C-shaped concentric retaining ring as specified in JIS B 2804, this product has been manufactured to a smaller cross-sectional height (b) to accommodate a needle shaped bearing and to an even smaller size range.
· Using a hard steel wire, a chemical treatment is applied to the surface.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.29 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

Retaining Ring BR

NTN

A dedicated stop ring used when the track ring or retainer of a needle roller bearing is fixed in the axial direction, or guided.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.24 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

Inner Ring

NTN

Optimal for use with shafts that cannot be surface hardened or finished,
although shafts are often used directly as raceway surfaces without a needle roller bearing inner ring.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	3.77 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Needle rollers NRA

INA

[Specifications]
・Internal Diameter(φ): 1-5
・Outer Diameter(φ): 5.8-39.8

INA Needle rollers NRA type.

Volume Discount

Select to compare

Configure now
Min. Shipping Days ：	12 Days

Promotional pricing ends 30/11/2024

Inner rings IR, precision machined, to DIN 620

INA

[Specifications]
・Inner dimension(mm): 5-380
・Outer dimension(mm): 8-415
・Width(mm): 10.5-100
・DIN 620

Inner rings IR are made from hardened rolling bearing steel and have precision machined raceways.

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	4.23 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Four-bolt Flanged Housing GG.ME.., Round, Cast Iron, for Radial Insert Ball Bearings

INA

[Specifications]
・Internal Diameter(φ): 46.987-109.985

[Features]
・For radial insert ball bearings, flanged housings made from cast iron are offered and can also be provided in a corrosion-resistant design
・Cast iron housings are always one-piece units and can support hish load

Select to compare

Configure now
Min. Shipping Days ：	4 Days

Promotional pricing ends 30/11/2024

Seal G

NTN

Seal specially designed for use with needle roller bearings with a small cross-section height.

[Features]
· Seal specially designed for use with needle roller bearings with a small cross-section height.
· Contact seal made of synthetic rubber reinforced by steel plate, with an operating temperature range of -25° to 120°C, and 100°C or less for continuous use.
· A G model with a single lip and a GD model with two lips are available.
· Hardening and finishing by grinding of the contact surface of the seal is necessary in order to obtain good sealing performance.
· In addition, there should not be any harmful damage or indentations on the contact surface of the seal.
· The inner ring raceway surface should preferably be used as a seal contact surface.
· A suitable press-fit between the seal and the housing can be obtained within a normal housing tolerance of G7 tp R7.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.88 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Locating ring

FAG

[Specifications]
・Type: FE, FRM
・Inner Diameter(mm): 46~180
・Outer Diameter(mm): 51~190
・Width(mm): 2~18

Stabilisation rings for fix bearing.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	3.00 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

GLYCODUR Maintenance-Free Plain Bearing Bushings GLYCODUR F

GLYCODUR

[Specifications]
・External diameter D(mm): 55
・Internal diameter d(mm): 50
・Width B(mm): 30

[Features]
・PTFE based according to ISO 3547 type P1
・Negligible stick-slip effect
・250 MPa maximum static load

Select to compare

Configure now
Starting from^∗ ：	10.32 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Plummer block housings, main housing, split, for spherical roller bearings with cylindrical bore, metric and inch size shaft diameters

FAG

[Specifications]
・Outer Diameter(mm): 280~500
・Width(mm): 230~350

Plummer block housing, split, for spherical roller bearings, metric and inch size shaft diameters, for grease lubrication.

Volume Discount

Select to compare

Configure now
Min. Shipping Days ：	3 Days

Plummer Block Housing GG.ASE.., Cast Iron, for Radial Insert Ball Bearings

INA

[Features]
・For radial insert ball bearings, plummer block housings made from cast iron are offered and can also be provided in a corrosion-resistant design
・Cast iron housings are always one-piece units and can support hish load

Select to compare

Configure now
Min. Shipping Days ：	4 Days

Two-bolt Flanged Housing GG.CJT.., Cast Iron, for Radial Insert Ball Bearings

INA

[Specifications]
・Internal diameter d(mm): 39.987~109.985

Two-bolt Flanged Housing GG.CJT.., Cast Iron, for Radial Insert Ball Bearings

Volume Discount

Select to compare

Configure now
Min. Shipping Days ：	4 Days

Two-bolt Flanged Housing GG.CJTZ.., Cast Iron, for Radial Insert Ball Bearings

INA

[Specifications]
・Internal diameter d(mm): 46.989~109.985

Two-bolt Flanged Housing GG.CJTZ.., Cast Iron, for Radial Insert Ball Bearings.

Select to compare

Configure now
Min. Shipping Days ：	4 Days

Two-bolt Flanged Housing GG.GLCTE.., Cast Iron, for Radial Insert Ball Bearings

INA

[Specifications]
・Internal diameter d(mm): 39.989~79.987

Two-bolt Flanged Housing GG.GLCTE.., Cast Iron, for Radial Insert Ball Bearings

Select to compare

Configure now
Min. Shipping Days ：	4 Days

SKF Locating Rings

SKF

[Specifications]
・Inner dimension(mm): 47-380
・Outer dimension(mm): 52-400
・Width(mm): 2-18
・Material: Steel

A bearing in the locating position must be secured axially in the housing, if the bearing seat in the housing and the bearing width do not match, locating (stabilizing) rings are required.

Select to compare

Configure now
Starting from^∗ ：	3.43 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Four-bolt Flanged Housing GG.CJ.., Square, Cast Iron, for Radial Insert Ball Bearings

INA

Four-bolt Flanged Housing GG.CJ.., Square, Cast Iron, for Radial Insert Ball Bearings.

Volume Discount

Select to compare

Configure now
Min. Shipping Days ：	3 Days

Felt seal

FAG

[Specifications]
・Outer dimension(mm): 11-206.2
・Width(mm): 9-151.2

[Features]
・Felt seals FSV are particularly suitable for grease lubrication
・They comprise an adapter holding the inserted, oil-impregnated felt strip and the adapter is secured against rotation by an O ring in the annular slot in the housing

Volume Discount

Select to compare

Configure now
Min. Shipping Days ：	3 Days

Two-bolt Flanged Housing GG.CFT.., Cast Iron, for Radial Insert Ball Bearings

INA

Two-bolt Flanged Housing GG.CFT.., Cast Iron, for Radial Insert Ball Bearings.

Select to compare

Configure now
Min. Shipping Days ：	4 Days

General Purpose Inner Ring

IKO

[Features]General-purpose inner ring with 2 types of inner ring shape: a loose taper relief and a small chamfer.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	5.43 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Felt Rings, Felt Strips

FAG

[Specifications]
・Inner dimension(mm): 5-16
・Width(mm): 4-12

FAG bearing accessories, felt rings/felt strips, inner diameters 5~16mm.

Volume Discount

Select to compare

Configure now
Min. Shipping Days ：	4 Days

Promotional pricing ends 30/11/2024

Axial needle roller and cage assemblies AXK, single direction, to DIN 5405-2

INA

[Specifications]
・Inner dimension(mm): 4-160
・Outer dimension(mm): 14-200
・Width(mm): 2-5

[Features]
・Axial needle roller and cage assemblies AXK comprise geometrically stable plastic or metal cages fitted with a large number of needle rollers
・Due to the high uniformity of diameter (the needle rollers are sorted to very small diameter tolerances) of the needle rollers with each other, this gives very uniform loading od the rolling elements
・DIN 5405-2

Volume Discount

3D CAD data available

Select to compare

Configure now
	Special price
Min. Shipping Days ：	Same day

SKF Cylinder Rollers

SKF

[Specifications]
・Material: 1.3505 (100Cr6)
・Surface hardness: 58 - 65 HRC
・Norm: DIN 5402-1
・Rolling element diameter Dw(mm): 4-40

Select to compare

Configure now
Min. Shipping Days ：	5 Days

INA Inner Rings

INA

[Specifications]
・Internal diameter d(mm): 5~200
・External diameter D(mm): 8~220

Inner rings IR are made from hardened rolling bearing steel and have precision machined raceways.

3D CAD data available

Select to compare

Configure now
Min. Shipping Days ：	5 Days

GLYCODUR Maintenance-Free Plain Bearing Bushings with Flange GLYCODUR F

GLYCODUR

[Specifications]
・Engineering material: Steel
・Coating: PFTE
・Static base loads(kN): 15, 54
・Internal diameter d(mm): 12, 25
・External diameter D(mm): 14, 28

Maintenance-Free Plain Bearing Bushings with Flange GLYCODUR F.

Select to compare

Configure now
Starting from^∗ ：	1.82 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Plummer Block Housing GG.SHE.., Cast Iron, for Radial Insert Ball Bearings

INA

Plummer Block Housing GG.SHE.., Cast Iron, for Radial Insert Ball Bearings.

Select to compare

Configure now
Min. Shipping Days ：	4 Days

Taking-up Housing Units GG.TUE.., Cast Iron, for Radial Insert Ball Bearings

INA

Taking-up Housing Units GG.TUE.., Cast Iron, for Radial Insert Ball Bearings.

Volume Discount

Select to compare

Configure now
Min. Shipping Days ：	3 Days

Inner Ring for Shell Type Needle Roller Bearing

IKO

· No oil hole

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	5.43 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

Seal GD

NTN

[Features]
· Dedicated needle roller bearing seal with a small cross-section designed for needle roller bearings.
· Contact seal made of synthetic rubber reinforced via steel plate.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	3.27 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Axial needle roller bearings AXW, single direction, AXK with axial bearing washer

INA

[Specifications]
・Internal Diameter(φ): 10~50
・Outer Diameter(φ): 27~73

Axial needle roller bearings, single direction, AXK with axial bearing washer.

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	3.55 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Needle Roller, NRB Series, Type B, Flat Ends, Profiled Ends

INA

[Specifications]
・Dw: 1~6
・Lw: 4.3~45.8

Needle Roller, NRB Series, Type B, Flat Ends, Profiled Ends.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.05 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

Bearing washers LS, suitable for AXK and K811

INA

[Specifications]
・Internal Diameter(φ): 6~160
・Outer Diameter(φ): 19~200

Bearing washers LS, suitable for AXK and K811.

Volume Discount

3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	2.98 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Felt strips / eClass code 23-05-17-90

SKF

[Specifications]
・eClass code: 23-05-17-90

Felt strips, and their high-temperature variants made of aluminium borosilicate, provide a simple and effective sealing solution. They accommodate relatively high shaft speeds, because a small gap forms between the felt strip and the shaft, transforming the seal into a non-contact, gap-type seal. Felt strips should be cut to the correct length and soaked in hot oil prior to being installed.

[Features]
・Cost-effective
・Suitable for relatively high shaft speeds

Select to compare

Configure now
Starting from^∗ ：	0.37 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Bearing Components / Aluminium, Steel stainless / Internal diameter 8~95mm

ZEN

[Specifications]
・Material: Aluminium, Steel stainless
・Internal diameter(mm): 8~95
・Outer diameter(mm): 12~184
・Surface: No twist-free grinding

Bearing Components from ZEN.

Select to compare

Configure now
Min. Shipping Days ：	4 Days

GLYCODUR Plain Bearing Bushings Requiring Maintenance GLYCODUR A

GLYCODUR

[Specifications]
・Engineering material: Steel
・Coating: POM lubricating pockets
・Internal diameter d(mm): 110
・Width B(mm): 60

Plain Bearing Bushings Requiring Maintenance GLYCODUR A.

Select to compare

Configure now
Starting from^∗ ：	42.71 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Flanged Housing F112.. for Self-Aligning Ball Bearing 112.., with Wide Inner-Ring, Felt Seal, Grease Lubrication

FAG

[Specifications]
・Inner Diameter(mm): 20~55
・Outer Diameter(mm): 47~90
・Width(mm): 42~65.5

Flanged housing for self-aligning ball bearing 112 with wide inner-ring, felt seal, grease lubrication.

Volume Discount

3D CAD data available

Select to compare

Configure now
Min. Shipping Days ：	3 Days

Promotional pricing ends 30/11/2024

Inner rings IR, precision machined, to DIN 620, grinded with recess process = absence of twist

INA

[Specifications]
・Internal Diameter(φ): 15~360
・Outer Diameter(φ): 20~390

Surface ground free from spiral marks for rotary shaft seals to DIN 3760 and DIN 3761.

Volume Discount

Select to compare

Configure now
	Special price
Min. Shipping Days ：	Same day

Shim washers / Width 0.7mm

SKF

[Specifications]
・Width(mm): 0.7
・eClass code: 23-05-19-01

SKF Machinery Shims are used to easily and reliably adjust the height of a machine. High quality shims allow accurate and long lasting height adjustments that save time and support reliable operation of the machine. Shims are supplied in packs of 10 and can be used to refill SKF Machinery Shim kits (assortments of different shim sizes and thickness).

[Features]
・Easy to fit and remove
・Close tolerances for accurate adjustments
・Fully de-burred
・Supplied in packs containing 10 shims
・Thickness and size are clearly marked on the shim

Select to compare

Configure now
Starting from^∗ ：	22.12 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Speedi-sleeves / Internal diameter 25.4mm

SKF

[Specifications]
・Internal diameter(mm): 25.4
・Width(mm): 7.95
・eClass code: 23-05-92-90

SKF Speedi-Sleeve provides an alternative to costly repairs for worn or damaged shafts. This thin-walled sleeve, specially developed by SKF, is simply positioned over the relevant part of the shaft and provides a smooth counterface that is optimized for radial shaft seals. Use of SKF Speedi-Sleeve can prevent the need for costly shaft treatments that may involve machining, hardening, plunge grinding or disassembly. SKF Speedi-Sleeve Gold is an enhanced version of standard SKF Speedi-Sleeve, offering improved resistance to abrasive wear.

[Features]
・Optimized countersurface
・Cost effective
・Well-proven solution

Select to compare

Configure now
Starting from^∗ ：	19.55 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Plummer block housings / Cast iron, Cast steel, Composite, Ductile cast iron / Outer diameter 70~380mm

SKF

[Specifications]
・Material: Cast iron, Cast steel, Composite, Ductile cast iron
・Outer diameter(mm): 70~380
・Width(mm): 32~95

Select to compare

Configure now
Min. Shipping Days ：	4 Days

Needle thrust washer

NADELLA

[Specifications]
・Inner dimension(mm): 5-40.1
・Outer dimension(mm): 12.4-59.5
・Width(mm): 0.8-3

CP Thrust Plate, Thin/Thick Series.

Select to compare

Configure now
Starting from^∗ ：	1.70 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days

	Select to compare Recommendation	Select to compare Recommendation	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare Promotional pricing ends 30/11/2024	Select to compare Promotional pricing ends 30/11/2024	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare	Select to compare
Brand	SKF	SKF	FAG	INA	FAG	NTN	NTN	NTN	INA	INA	INA	NTN	FAG	GLYCODUR	FAG	INA	INA	INA	INA	SKF	INA	FAG	INA	IKO	FAG	INA	SKF	INA	GLYCODUR	INA	INA	IKO	NTN	INA	INA	INA	SKF	ZEN	GLYCODUR	FAG	INA	SKF	SKF	SKF	NADELLA
Product Series	Speedi-sleeves / Internal diameter 12~201.63mm	Locating rings / Internal diameter 47~460mm	Plummer block housings, split	Needle rollers NRB, to DIN 5402-3/ ISO 3096, type B, end faces flat, profiled ends	Tab washers MB, main dimensions to DIN 5406	Retaining Ring WR	Retaining Ring BR	Inner Ring	Needle rollers NRA	Inner rings IR, precision machined, to DIN 620	Four-bolt Flanged Housing GG.ME.., Round, Cast Iron, for Radial Insert Ball Bearings	Seal G	Locating ring	GLYCODUR Maintenance-Free Plain Bearing Bushings GLYCODUR F	Plummer block housings, main housing, split, for spherical roller bearings with cylindrical bore, metric and inch size shaft diameters	Plummer Block Housing GG.ASE.., Cast Iron, for Radial Insert Ball Bearings	Two-bolt Flanged Housing GG.CJT.., Cast Iron, for Radial Insert Ball Bearings	Two-bolt Flanged Housing GG.CJTZ.., Cast Iron, for Radial Insert Ball Bearings	Two-bolt Flanged Housing GG.GLCTE.., Cast Iron, for Radial Insert Ball Bearings	SKF Locating Rings	Four-bolt Flanged Housing GG.CJ.., Square, Cast Iron, for Radial Insert Ball Bearings	Felt seal	Two-bolt Flanged Housing GG.CFT.., Cast Iron, for Radial Insert Ball Bearings	General Purpose Inner Ring	Felt Rings, Felt Strips	Axial needle roller and cage assemblies AXK, single direction, to DIN 5405-2	SKF Cylinder Rollers	INA Inner Rings	GLYCODUR Maintenance-Free Plain Bearing Bushings with Flange GLYCODUR F	Plummer Block Housing GG.SHE.., Cast Iron, for Radial Insert Ball Bearings	Taking-up Housing Units GG.TUE.., Cast Iron, for Radial Insert Ball Bearings	Inner Ring for Shell Type Needle Roller Bearing	Seal GD	Axial needle roller bearings AXW, single direction, AXK with axial bearing washer	Needle Roller, NRB Series, Type B, Flat Ends, Profiled Ends	Bearing washers LS, suitable for AXK and K811	Felt strips / eClass code 23-05-17-90	Bearing Components / Aluminium, Steel stainless / Internal diameter 8~95mm	GLYCODUR Plain Bearing Bushings Requiring Maintenance GLYCODUR A	Flanged Housing F112.. for Self-Aligning Ball Bearing 112.., with Wide Inner-Ring, Felt Seal, Grease Lubrication	Inner rings IR, precision machined, to DIN 620, grinded with recess process = absence of twist	Shim washers / Width 0.7mm	Speedi-sleeves / Internal diameter 25.4mm	Plummer block housings / Cast iron, Cast steel, Composite, Ductile cast iron / Outer diameter 70~380mm	Needle thrust washer
CAD					3D					3D														2D / 3D		3D		3D				2D / 3D		3D		3D				3D
Starting from^∗	-	3.85 € *Unit price with basic configuration	- Volume Discount	- Volume Discount	Special price Promotional pricing ends 30/11/2024 Volume Discount	0.29 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	0.24 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	3.77 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	- Volume Discount	4.23 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	-	1.88 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	3.00 € *Unit price with basic configuration Volume Discount	10.32 € *Unit price with basic configuration	- Volume Discount	-	-	-	-	3.43 € *Unit price with basic configuration	- Volume Discount	- Volume Discount	-	5.43 € *Unit price with basic configuration Volume Discount	-	Special price Promotional pricing ends 30/11/2024 Volume Discount	-	-	1.82 € *Unit price with basic configuration	-	- Volume Discount	5.43 € *Unit price with basic configuration Volume Discount	3.27 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	3.55 € *Unit price with basic configuration Volume Discount	0.05 € *Unit price with basic configuration Volume Discount	2.98 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	0.37 € *Unit price with basic configuration	-	42.71 € *Unit price with basic configuration	- Volume Discount	Special price Promotional pricing ends 30/11/2024 Volume Discount	22.12 € *Unit price with basic configuration	19.55 € *Unit price with basic configuration	-	1.70 € *Unit price with basic configuration
Min. Shipping Days	4 Days	4 Days	3 Days	3 Days	Same day	Same day	Same day	Same day	12 Days	Same day	4 Days	Same day	3 Days	5 Days	3 Days	4 Days	4 Days	4 Days	4 Days	5 Days	3 Days	3 Days	4 Days	5 Days	4 Days	Same day	5 Days	5 Days	5 Days	4 Days	3 Days	5 Days	Same day	3 Days	4 Days	Same day	4 Days	4 Days	5 Days	3 Days	Same day	12 Days	4 Days	4 Days	4 Days