Bearing Units（Page 4）

?* Information on days to ship and prices

• 

  ConCentra-unit

  SKF

  [Specifications]
  ・Mounting tensioning bearing: ConCentra-step sleeve
  ・Case material: grey cast iron
  
  [Features]
  ・Ready to mount
  ・Factory lubricated and sealed
  ・Long service life

  Select to compare

  Configure now
  Starting from∗ ：	60.18 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Flange Bearing Housing, Round

  SKF

  Select to compare

  Configure now
  Starting from∗ ：	19.80 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Flange Bearing Housing, Square

  SKF

  Select to compare

  Configure now
  Starting from∗ ：	12.35 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Plummer Block Housing Unit LSHE, Tapped Base, Cast Iron Housing

  INA

  Plummer block housing unit

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	52.60 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Ball Flange Bearings TUCFL, Thermoplastic Housing with Stainless Steel Bearing, White

  MAEDLER

  Material: Housing: Thermoplast PBT, white.
  Rolling bearing: Stainless steel 1.4125 (X105CrMo17, AISI 440 C), lubricated with grease FM 222 for food processing machinery, with registration FDA, CIFA, KPF2K-20, NSF H1.
  The rolling bearing can be swiveled when mounting to compensate shaft misalignment. The shaft will get fastened with 2 setscrews.
  Lubricated for life at normal operating conditions. Re-lubricating is possible.
  Delivery with stainless steel grease nipple.
  Temperature range: -20°C to +90°C (for short time up to +120°C).
  
  * Not recommended for axial force.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	24.80 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Ball Pillow Block Bearings UCP (Grey Cast Iron)

  MAEDLER

  Material: Housing from grey cast iron.
  Rolling bearing from bearing steel.
  The rolling bearing can be swiveled when mounting to compensate shaft misalignment.
  The shaft will get fastened with 2 setscrews. Lubricated for life at normal operating conditions. Re-lubricating is possible.
  Delivery with grease nipple.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	17.83 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Fixed bearing unit steel (24072)

  NORELEM

  · Support of radial and axial forces from both directions
  
  · Highest stiffness, precise tool positioning and repeatability
  
  · With two-row, pretensioned angular contact ball bearings
  
  · Can be screwed on from top and bottom
  
  · Can be pinned with two tapered pins or dowel pins

  Select to compare

  Configure now
  Starting from∗ ：	582.29 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Pillow block bearing pedestal bearing, UCP, grey cast iron (24200)

  NORELEM

  · With a sealed, single-row ball bearing
  
  · Compensates for misalignments on the shaft
  
  · Internal diameter of the bearings with plus-tolerance
  
  · Maintenance-free
  
  · Ready to install

  Select to compare

  Configure now
  Starting from∗ ：	16.37 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Pillow Blocks / Sheet Metal Housing / Flanged

  MISUMI

  [Features] This is a low cost ball bearing unit (flange type) combining 2 pressed steel plates.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.58 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Pillow Blocks, Cast Iron Pillow Block (Heavy Load Type)

  MISUMI

  It is designed with high basic dynamic rating load and basic static rating load, and is used for heavy load applications.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	57.53 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Ball Bearing Unit, Casting Asymmetric Flange Type

  MISUMI

  ·Features: Only one side has a two-bolt flange, suitable for space saving.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	25.27 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Pillow Blocks, Tensioners

  MISUMI

  ・ It is suitable for places where the axis needs to be moved, such as adjusting the belt or chain.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	81.99 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Eccentric Collar Type Unit

  NTN

  Although this eccentric collar type bearing unit maintains a tight connection between the shaft and the inner ring even when there are shock loads and vibration, it cannot be used in areas where there is repeated forward and reverse rotation.

  Select to compare

  Configure now
  Starting from∗ ：	80.38 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Spherical Graphite Cast Iron Diamond Flange Shape

  NTN

  [Features] Bearing unit with diamond flange. The material of the main body of the unit is cast iron.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.34 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Cast Iron Cartridge Shape

  NTN

  [Features]
  ·The outer circumference of the housing is cylindrical and finished to an accuracy of h7, and the bearing outer diameter and the housing inner diameter are spherical so that the entire unit has aligning capability and move freely in the axial direction.
  ·Therefore, it is used in the non-locating bearing when the shaft is long enough to allow the expansion and contraction of the shaft caused by temperature difference to escape.
  ·The mounting to the shaft is an adapter system, which is suitable for locations with vibration.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.17 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Cast Iron High Center Pillow Unit UCHP

  NTN

  A high center pillow unit optimal for when the shaft center is a long distance from the base.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	21.60 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cast Iron Narrow Width Pillow Unit UCUP

  NTN

  A narrow width pillow unit that's optimal for space saving.
  
  [Features ]
  · Cylindrical holes, set screw system

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	23.42 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Steel Plate Diamond Flange Shape

  NTN

  [Features]
  · The bearing box is a diamond shape, and is mounted to frames and other structures with a bolt.
  [Applications]
  · Appropriate for use in confined spaces.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.73 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Cast Iron Round-Flanged Unit With Spigot Joint UCFC

  NIPPON PILLOW BLOCK

  Bearing unit that combines a bearing and a bearing box with a round flange and a spigot joint on the mounting surface

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	22.88 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cast Iron Round Flanged Unit with Spigot Joint, Adapter Type, UKFC (Adapter Sold Separately)

  NIPPON PILLOW BLOCK

  This bearing unit combines a bearing and a bearing box with a round flange and a spigot joint on the mounting surface. *Adapter sold separately. Please confirm the compatible adapters in our catalog.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	28.65 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Grooved Steel Take-Up Unit UCTL

  NIPPON PILLOW BLOCK

  This take-up unit features a frame made from grooved steel, and is a unit product combined with an adjustment bolt.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	51.49 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Steel Plate Flanged Unit SBPF

  NIPPON PILLOW BLOCK

  Lightweight round flanged unit for light loads made from the combination of a lightweight bearing and a press machined steel plate bearing box.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.42 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Steel Plate Round-Flanged Unit, Cylindrical-Bore Type With Set Screws, BPF Type CUCF

  ASAHI SEIKO

  Combines a built-in bearing with a rubber seal in a simple double steel plate bearing box structure, making it suitable for a transmission shaft with a relatively light load and medium to low speed.

  Select to compare

  Configure now
  Starting from∗ ：	14.91 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Pillow Unit Silver Series with Eccentric Wheel, Cylindrical Hole Shape, MUP

  ASAHI SEIKO

  The bearing, fixed eccentric wheel, and bearing box are all made of corrosion-resistant stainless steel, making the product suitable for use with machinery that doesn't handle rust well.
  
  [Features]
  · Logical steel center: The outer wheel's outer diameter is machined into a ball surface, fitting around the center of a bearing box machined in the same way. Because both of the spherical surfaces can be aligned, this ensures logical operation of the machinery and stops erratic shaft center behavior, preventing excessive force from being applied to the bearing due to complications.
  · Supply method: Simply supply fresh grease at arbitrary intervals and ensure that the bearing internal workings are ejecting old grease to the exterior as much as possible to extend working life for both grease supplies and the bearing. The cast iron series comes standard with a supply method to ensure that it can be used in severe conditions for long periods of time with complete confidence.
  · Excellent sealing equipment: The bearing is double-sealed with a steel plate slinger and a heat-resistant synthetic rubber seal. Friction is low and even if the shaft tilts the seal contact is unchanged. The result is an extremely effective seal that prevents both grease leaks and contamination of the interior by external trash and moisture. Can be used with confidence even extremely poor conditions.
  · This insert bearing unit with a cover can be used with confidence in poor environmental conditions such as factories engaged in steel manufacturing, milling, cement making, and casting, and in machinery for aircraft, air conditioning, and public works. The advance receiving box for units with set screws and adapters included has a steel plate or cast iron cover mounted for dust prevention, and both the bearing and the bearing box are processed with sealing equipment to improve dust-proof properties.
  · Deep groove shaped internal structure: The bearing interior is identical to the deep groove ball bearing structure of the 6200 and 6300 shape. For this reason, it can support both radial and axial loads and is low noise.
  · Bearing and bearing box compatibility: Because the bearing and bearing box have mutual compatibility, the bearing can be replaced on its own as necessary, which is extremely convenient.
  · Easy handling: The insert bearing unit is an integrated combination of a bearing and bearing box. The bearing is preloaded with an appropriate amount of high quality lubricant grease, so it can be operating immediately as is after mounting. For this reason, there is no concern of contaminants and other materials entering the bearing during handling, preventing trouble during mounting before it occurs.
  · Simple mounting to the shaft: The insert bearing unit can be mounted to the shaft on the side of the inner ring with the two included hex socket head set screws, to the inner ring using the included mounting adapter for the tapered hole in the inner diameter, or mounted with the included eccentric wheel. All of these methods are simple procedures, and the shaft machining is easy.

  Select to compare

  Configure now
  Starting from∗ ：	55.74 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Pillow Unit Silver Series with Set Screws, Cylindrical Hole Shape, KP

  ASAHI SEIKO

  [Features]
  · Although the bearing box is a standard pillow shape, it is smaller and more lightweight than conventional insert bearing units.
  · Also, the bearing box is marked with a center mark for easy positioning.
  · The fixation method for the bearing box and shaft is the set screw method.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.36 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Insert Bearing, Stainless Steel Series with Set Screws, Cylindrical Hole Shape, MUC

  ASAHI SEIKO

  [Features]
  · Although the size is identical to the UC shape, the outer ring, inner ring, ball, slinger, and set screws are all made of stainless steel.

  Select to compare

  Configure now
  Starting from∗ ：	57.11 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Diamond Flange Shape with Eccentric Wheel Method, Stainless Steel and Silver Environmentally Friendly Series

  ASAHI SEIKO

  [Features]
  · The bearing, fixed eccentric wheel, and bearing box are all made of corrosion-resistant stainless steel, making the product suitable for use with machinery that doesn't handle rust well.

  Select to compare

  Configure now
  Starting from∗ ：	62.90 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Pillow Unit

  FSBEARING

  Brand-name products provided by MISUMI-VONA are carefully-selected from the products of Asian manufacturers and offered based on customers' needs. Please select the right item for your individual usage environment. FSBEARING is made by a major Chinese manufacturing specializing in bearing related products. Since its founding in 1988, the company has carried out proactive capital investment and research and development, and is currently exporting its products to countries all over the world in areas such as Europe, North America, and Asia, where they are appreciated for their stable quality.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	10.50 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Lightweight Diamond Flanged Unit

  FSBEARING

  Brand-name products provided by MISUMI-VONA are carefully-selected from the products of Asian manufacturers and offered based on customers' needs. Please select the right item for your individual usage environment. FSBEARING is made by a major Chinese manufacturing specializing in bearing related products. Since its founding in 1988, the company has carried out proactive capital investment and research and development, and is currently exporting its products to countries all over the world in areas such as Europe, North America, and Asia, where they are appreciated for their stable quality.

  Select to compare

  Configure now
  Starting from∗ ：	10.10 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Steel Plate Diamond Flanged Unit

  FSBEARING

  Brand-name products provided by MISUMI-VONA are carefully-selected from the products of Asian manufacturers and offered based on customers' needs. Please select the right item for your individual usage environment. FSBEARING is made by a major Chinese manufacturing specializing in bearing related products. Since its founding in 1988, the company has carried out proactive capital investment and research and development, and is currently exporting its products to countries all over the world in areas such as Europe, North America, and Asia, where they are appreciated for their stable quality.

  Select to compare

  Configure now
  Starting from∗ ：	6.95 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Round Flanged Unit with Spigot Joint

  FSBEARING

  Brand-name products provided by MISUMI-VONA are carefully-selected from the products of Asian manufacturers and offered based on customers' needs. Please select the right item for your individual usage environment. FSBEARING is made by a major Chinese manufacturing specializing in bearing related products. Since its founding in 1988, the company has carried out proactive capital investment and research and development, and is currently exporting its products to countries all over the world in areas such as Europe, North America, and Asia, where they are appreciated for their stable quality.

  Select to compare

  Configure now
  Starting from∗ ：	12.12 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Flanged bearing housing unit, 2 hole, with radial insert ball bearing GAY..-NPP-B

  INA

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	23.14 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Flanged bearing housing unit, 4 hole, with adapter sleeve bearing GSH..-2RSR-B

  INA

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	63.62 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Housing units GLCTE..-TV-FA125, two-hole, plastic housing, radial insert ball bearing with eccentric locking collar, with Corrotect® coating, P seals

  INA

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	46.89 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Housing units PCJ..-TV-FA125, four-hole, plastic housing, radial insert ball bearing with eccentric locking collar, with Corrotect® coating, P seals

  INA

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	43.51 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Housing units PCJY, four-bolt flanged housing units, cast iron, grub screws in inner ring, P seals

  INA

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	23.14 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Housing units RA, three / four-bolt flanged housing units, sheet steel, eccentric locking collar, P seals

  INA

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	20.58 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Housing units RATY, two-bolt flanged housing units, sheet steel, grub screws in inner ring, P seals

  INA

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.38 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Housing units RCJT, two-bolt flanged housing units, cast iron, eccentric locking collar, R seals

  INA

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	29.34 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Housing units RCJTA, two-bolt flanged housing units, cast iron, adapter sleeve, R seals

  INA

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	45.15 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Housing units RCJY, four-bolt flanged housing units, cast iron, grub screws in inner ring, R seals

  INA

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	21.85 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Housing Units RCJY..TV-VA, four-hole, plastic housing, radial insert ball bearing with grub screws in inner ring, corrosion-resistant design, R seals

  INA

  Select to compare

  Configure now
  Starting from∗ ：	97.33 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Housing units TME, four-bolt flanged housing units, cast iron, centring spigot, eccentric locking collar, T seals

  INA

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	44.12 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Housing units UCFA, cast iron, grub screws in inner ring, RSR seals, for swivel motion

  INA

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	21.91 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Housing units UCFC, four-bolt flanged housing units, round design, cast iron, grub screws in inner ring, RSR seals

  INA

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	23.23 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

Loading...