Locating Units

• 

  • Volume Discount

  MISUMI

  Auto-Latch

  CAD:

  2D

  /3D

  Type
  Support Unit

  Cena standardowa (bez VAT):

  18.60 €～

  Standardowa data wysyłki:

  Towar dostępny w magazynie: 1 dzień roboczy

  Możliwa wysyłka tego samego dnia

  Konfiguruj
• 

  • ZNIŻKA
  • Volume Discount
  • Order quantities extended (D-JIT)
  • Stock

  MISUMI

  Feed Fingers

  CAD:

  2D

  /3D

  Type
  Support Unit

  Cena standardowa (bez VAT):

  Cena specjalna

  Standardowa data wysyłki:

  Towar dostępny w magazynie: 1 dzień roboczy

  Niektóre pozycje mogą zostać wysłane tego samego dnia

  Konfiguruj
• 

  • Volume Discount

  ASUTEC

  Pneumatic separator with damping

  Separators with damping are made for stopping of one or more accumulated workpiece carriers at a defined stop surface of the workpiece carrier in conveyor systems.They are mainly used where the transport speed is in the middle or high range or when the transported workpieces are sensitive to shocks. Because of the damped stopping of the workpiece carrier, the entire conveyor system is prevented from damage and wear. Optionally, in many variants, the upper and lower position of the stop can be detected with inductive proximity switches or with magnetic field sensors (T-slot sensors).

  Czytaj dalej

  CAD:

  3D

  Type
  -

  Cena standardowa (bez VAT):

  255.57 €～

  Standardowa data wysyłki:

  10 dni robocze

  Konfiguruj
• 

  • Volume Discount

  ASUTEC

  Pneumatic angle damper

  Angle dampers dampen workpiece carriers to a stop and are mainly used where workpiece carriers are changing direction at a cross-intersection. For example, when the workpiece carrier is changing its transport direction from a transverse section into a longitudinal section and vice versa. Angle dampers are commonly used in transfer systems were shock-sensitive products are transported.

  Czytaj dalej

  CAD:

  3D

  Type
  -

  Cena standardowa (bez VAT):

  259.33 €～

  Standardowa data wysyłki:

  10 dni robocze

  Konfiguruj
• 

  KIPP

  Quarter-turn clamp locks stainless steel, knob plastic (K1061)

  [Specifications]・Main material: steel・Surface finish body: nickel-plated・Component material: plastic[Features]・Locking element for connecting two separate plates・Click signal when locked・Form A mounting option: for plate thickness 6 or 12 mm・Fastening screws included・Main material: steel

  Czytaj dalej

  CAD:

  2D

  /3D

  Type
  -

  Cena standardowa (bez VAT):

  32.38 €～

  Standardowa data wysyłki:

  4 dni robocze

  Konfiguruj
• 

  • Volume Discount

  IMAO CORPORATION

  Thumb Turn Clamper (QCTH, QCTHL)

  Cam & spring type with lock / unlock state visible at a glance, high visibility with safety mechanism. Knob made of metal is used to reduce chance of damage.

  Czytaj dalej

  CAD:

  2D

  /3D

  Type
  Single-Action Mounted Jig

  Cena standardowa (bez VAT):

  59.12 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  KIPP

  Push button latches stainless steel, Form A, with head (K1562)

  [Specifications]・Main material: stainless steel・Surface finish body: bright・Component material: stainless steel[Features]・For connecting machine parts and workpieces quickly and easily・Mounting option for plate thickness 3 to 27mm・Secure locking by simply pressing and releasing the push button・Ideal for places where space is limited・Application sectors: machine, instrument and fixture construction, measuring technology, domestic use・Version 1: with head

  Czytaj dalej

  CAD:

  2D

  /3D

  Type
  -

  Cena standardowa (bez VAT):

  40.43 €

  Standardowa data wysyłki:

  4 dni robocze

  Konfiguruj
• 

  • Volume Discount

  IMAO CORPORATION

  Quick Shaft Clamp (QSC)

  Lever operation pushes the internal push bar, and shaft is clamped. Unclamp operates when returning lever with plate spring acting on push bar.

  Czytaj dalej

  CAD:

  2D

  /3D

  Type
  Clamp Unit

  Cena standardowa (bez VAT):

  42.18 €～

  Standardowa data wysyłki:

  Towar dostępny w magazynie: 1 dzień roboczy

  Niektóre pozycje mogą zostać wysłane tego samego dnia

  Konfiguruj
• 

  • Volume Discount

  ASUTEC

  Pneumatic separator without damping

  Separators without damping are made for stopping of one or more accumulated workpiece carriers at a defined stop surface of the workpiece carrier in conveyor systems.They are mainly used where the transport speed is low or when the transported workpieces are insensitive to shocks. Optionally, in many variants, the upper and lower position of the stop can be detected with inductive proximity switches or with magnetic field sensors (T-slot sensors).

  Czytaj dalej

  CAD:

  3D

  Type
  -

  Cena standardowa (bez VAT):

  91.45 €～

  Standardowa data wysyłki:

  7 dni robocze

  Konfiguruj
• 

  KIPP

  Push button latches stainless steel, Form B, without head (K1562)

  [Specifications]・Main material: stainless steel・Surface finish body: bright・Component material: stainless steel[Features]・For connecting machine parts and workpieces quickly and easily・Mounting option for plate thickness 3 to 27mm・Secure locking by simply pressing and releasing the push button・Ideal for places where space is limited・Application sectors: machine, instrument and fixture construction, measuring technology, domestic use・Version 1: without head

  Czytaj dalej

  CAD:

  2D

  /3D

  Type
  -

  Cena standardowa (bez VAT):

  38.59 €

  Standardowa data wysyłki:

  4 dni robocze

  Konfiguruj
• 

  • Volume Discount

  ASUTEC

  Electrical separator with damping

  Separators with damping are made for stopping of one or more accumulated workpiece carriers at a defined stop surface of the workpiece carrier in conveyor systems.They are mainly used where the transport speed is in the middle or high range or when the transported workpieces are sensitive to shocks. Because of the damped stopping of the workpiece carrier, the entire conveyor system is prevented from damage and wear. The electrically controlled separators from ASUTEC are available in many different versions. On the one hand, with a motorized drive and integrated evaluation electronics or, on the other hand, with an electrically controlled single-stroke control magnet. The damping is effected by a hydraulic damping unit or by an adjustable air damping system.Benefits of the electrical separators:Elimination of pneumaticEco-Friendly production by abolition of the extract airMinimal energy consumptionIncreased energy efficiencyEasy and very quick installationHigh time and cost savings

  Czytaj dalej

  CAD:

  3D

  Type
  -

  Cena standardowa (bez VAT):

  1,166.29 €～

  Standardowa data wysyłki:

  15 dni robocze

  Konfiguruj
• 

  • Volume Discount

  MISUMI

  Feed Fingers / Economy

  CAD:

  2D

  /3D

  Type
  Support Unit

  Cena standardowa (bez VAT):

  16.19 €～

  Standardowa data wysyłki:

  Towar dostępny w magazynie: 1 dzień roboczy

  Niektóre pozycje mogą zostać wysłane tego samego dnia

  Konfiguruj
• 

  KIPP

  Clamping plates recessed for quarter-turn clamp locks (K1062)

  [Specifications]・Main material: stainless steel, steel・Surface finish body: bright, nickel-plated・D=diameter(mm): 5, 8[Features]・Form B mounting option for plate thickness over 10mm・Fastening screws included

  Czytaj dalej

  CAD:

  2D

  /3D

  Type
  -

  Cena standardowa (bez VAT):

  14.80 €～

  Standardowa data wysyłki:

  4 dni robocze

  Konfiguruj
• 

  KIPP

  Locating cylinder Ball Lock (K0935)

  · Mechanical positioning and clamping system· Various sizes· High retaining forces· For different thicknesses of clamping plate

  Czytaj dalej

  Type
  -

  Cena standardowa (bez VAT):

  101.52 €～

  Standardowa data wysyłki:

  4 dni robocze

  Konfiguruj
• 

  KIPP

  Locating cylinder stainless steel, pneumatic (K1738)

  [Specifications]・Main material: stainless steel・Component material: nitrile rubber・D=diameter(mm): 19[Features]・Suitable for automation processes・Pneumatic actuation・Compact design・Rust-free

  Czytaj dalej

  Type
  -

  Cena standardowa (bez VAT):

  104.08 €

  Standardowa data wysyłki:

  4 dni robocze

  Konfiguruj
• 

  NORELEM

  Latch (08150)

  · Modular system for drilling jigs· Locking system for drilling plates

  Czytaj dalej

  Type
  Support Unit

  Cena standardowa (bez VAT):

  66.79 €～

  Standardowa data wysyłki:

  4 dni robocze

  Konfiguruj
• 

  • Volume Discount

  ASUTEC

  Pneumatic separator for roller conveyor system with damping

  The separator from ASUTEC for roller conveyor systems have the advantage that they can be usedfor direct integration into roller conveyors because of the specially developed slim design. These separators stop one or more accumulated workpiece carriers on the defined workpiece carrier stop plate in roller conveyor systems. Especially useful are the separator for tight installation spaces between the rollers. The concept developed by Asutec with extreme stability and high resistance to contamination makes these separators universally applicable. For all ASUTEC separators for roller conveyor systems, it is possible to query the upper and the lowered position with inductive proximity switches.

  Czytaj dalej

  CAD:

  3D

  Type
  -

  Cena standardowa (bez VAT):

  766.70 €～

  Standardowa data wysyłki:

  10 dni robocze

  Konfiguruj
• 

  • Volume Discount

  ASUTEC

  Pneumatic positioning unit

  Positioning units are used to precisely position the workpiece carrier after stopping. When the positioning cylinder is extended, the workpiece carrier is centered with suitable locating pins and thus exactly positioned. Typically, the workpiece carrier is lifted by the positioning slightly from the conveyor belt and above pressed against a fixed stop. Thus, the workpiece carrier no longer rests on the conveyor belt and processes on the work piece can occur without vibration. The positioning units are supplied without accessories and have a receiving bore for the insertion of suitable locating pin. In many variants, the upper and lower position of the stop can be detected with inductive proximity switches or with magnetic field sensors (T-slot sensors).

  Czytaj dalej

  CAD:

  3D

  Type
  -

  Cena standardowa (bez VAT):

  207.97 €～

  Standardowa data wysyłki:

  10 dni robocze

  Konfiguruj
• 

  MISUMI

  Work Detection Units

  [Features] It can be used in places that cannot be directly detected by proximity sensors.

  Czytaj dalej

  CAD:

  2D

  /3D

  Type
  Workpiece Detection Unit

  Standardowa data wysyłki:

  7 dni robocze

  Konfiguruj
• 

  IMAO CORPORATION

  Linear Stop Motion (LSM)

  Using lever operation linear rail is directly clamped. As clamp is with internal screw, clamping is always regular. Can operate even in narrow gap.[Features]· Easy operation and secure locking.· As clamps with internal spring, clamping is always regular.· As swivel space for clamping lever is not required, can operate even in small gap as shown in the diagram below.· Lever direction can be changed by 90° pitch

  Czytaj dalej

  CAD:

  2D

  /3D

  Type
  -

  Cena standardowa (bez VAT):

  178.78 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  KIPP

  Quarter-turn clamp locks, flat stainless steel (K1061)

  [Specifications]・Main material: steel・Surface finish body: nickel-plated・Component material: stainless steel[Features]・Locking element for connecting two separate plates・Ideal for restricted spaces・Click signal when locked・Form A mounting option: for plate thickness 6 or 12mm・Fastening screws included

  Czytaj dalej

  CAD:

  2D

  /3D

  Type
  -

  Cena standardowa (bez VAT):

  42.56 €～

  Standardowa data wysyłki:

  4 dni robocze

  Konfiguruj
• 

  KIPP

  Cable fasteners stainless steel or plastic in Hygienic DESIGN, cable gland (K1453)

  [Specifications]・Main material: plastic, stainless steel・Component material: silicon・Component colour: blueCable fasteners stainless steel or plastic in Hygienic DESIGN, cable gland (K1453)

  Czytaj dalej

  CAD:

  2D

  /3D

  Type
  -

  Cena standardowa (bez VAT):

  9.53 €～

  Standardowa data wysyłki:

  4 dni robocze

  Konfiguruj
• 

  KIPP

  Locating cylinder with quick clamping system (K0935)

  [Specifications]・Main material: high carbon steel・Component material: ball-bearing steel・D=pin diameter(mm): 13, 16,10[Features]・Fast opening and closing・Mechanical positioning and clamping system・Various sizes・High retaining forces・For different thicknesses of clamping plate

  Czytaj dalej

  Type
  -

  Cena standardowa (bez VAT):

  107.53 €～

  Standardowa data wysyłki:

  4 dni robocze

  Konfiguruj
• 

  KIPP

  Quarter-turn clamp locks stainless steel, knob stainless steel (K1559)

  · High clamping forces up to 400 N· Ideal where space is restricted:· Click signal when locked· Fastening screws included· Mounting option for plate thickness 6 to 20 mm

  Czytaj dalej

  CAD:

  2D

  /3D

  Type
  -

  Cena standardowa (bez VAT):

  71.68 €

  Standardowa data wysyłki:

  4 dni robocze

  Konfiguruj
• 

  • Volume Discount

  IMAO CORPORATION

  Quick Shaft Clamp (Air Operation) (QSCA)

  Clamp with spring pressure, and unclamping with air pressure, so no worry of lowered clamping force due to air leaks etc. Multiple simultaneous controls possible.

  Czytaj dalej

  CAD:

  2D

  /3D

  Type
  Clamp Unit

  Cena standardowa (bez VAT):

  118.07 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount

  ASUTEC

  Pneumatic accelerator module

  Acceleration modules from ASUTEC ensure a noticeable reduction of the cycle times by shortening the time between the individual machining cycles. The acceleration module ensures that the workpiece to be machined leaves the machining station more quickly and thus the next machining cycle can start earlier. The use of an acceleration module is very effective especially in transfer systems with low belt friction, as in the case of an accumulation roller chain conveyor. As soon as the separator lowers and releases the workpiece carrier for further transport, the acceleration module is activated and pushes and accelerates the workpiece carrier. This makes it possible to shorten the cycle times of up to 2 seconds.

  Czytaj dalej

  CAD:

  3D

  Type
  -

  Cena standardowa (bez VAT):

  290.66 €～

  Standardowa data wysyłki:

  19 dni robocze

  Konfiguruj
• 

  KIPP

  Quarter-turn latches steel rotary knob, plastic (K1561)

  · Locking element for connecting two separate plates· Click signal when locked· Ideal where space is restricted:· Mounting option for plate thickness 6 to 14 mm· Fastening screws included

  Czytaj dalej

  CAD:

  2D

  /3D

  Type
  -

  Cena standardowa (bez VAT):

  37.67 €～

  Standardowa data wysyłki:

  4 dni robocze

  Konfiguruj
• 

  • Volume Discount

  ASUTEC

  Pneumatic return stop

  Return stops are used in low-friction transfer systems (eg with accumulation roller chain). They prevent rebounding of the workpiece carrier from the separator in the stopping process. Rebounding the workpiece carriers leads to complications in the control of the workpiece carriers since the workpiece carrier is temporarily not at the presumed position. In addition, rebounding has a negative effect on the cycle time, and the components of the transfer system are more strongly loaded by the multiple impact of the workpiece carrier on the separator. Retrun stops may not be used to stop the workpiece carriers in the conveying direction. During transport ot the workpiece carrier in regular transport direction, the pawl of the return stop is pressed down by the workpiece carrier when moving over it.Retrun stops are also available, which can be lowered pneumatically or electrically for the reversing operation of the conveyor.

  Czytaj dalej

  CAD:

  3D

  Type
  -

  Cena standardowa (bez VAT):

  59.52 €～

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  KIPP

  Quarter turn latches, with cross head (K1730)

  · Small lock with high tensile strength· Opened or closed with a quarter turn· Vibration-resistant and tolerance-compensating· Loss-proof (according to mechanical engineering directive)

  Czytaj dalej

  CAD:

  2D

  /3D

  Type
  -

  Cena standardowa (bez VAT):

  2.82 €

  Standardowa data wysyłki:

  4 dni robocze

  Konfiguruj
• 

  KIPP

  Quarter-turn clamp lock steel, rotary knob plastic (K1558)

  · Locking element for connecting two separate plates· With retractable shank, ideal for places where space is limited· Click signal when locked· Mounting option for plate thickness 6 to 14 mm· Fastening screws included

  Czytaj dalej

  CAD:

  2D

  /3D

  Type
  -

  Cena standardowa (bez VAT):

  34.91 €～

  Standardowa data wysyłki:

  4 dni robocze

  Konfiguruj
• 

  KIPP

  Positioning units, spring-loaded (K0917)

  · Positioning and supporting of workpieces with boreholes· Form A: locating and support element· Form B: locating element

  Czytaj dalej

  CAD:

  2D

  /3D

  Type
  -

  Cena standardowa (bez VAT):

  125.90 €～

  Standardowa data wysyłki:

  4 dni robocze

  Konfiguruj
• 

  KIPP

  Quarter turn latches, with star grip (K1730)

  · Small lock with high tensile strength· Opened or closed with a quarter turn· Vibration-resistant and tolerance-compensating· Loss-proof (according to mechanical engineering directive)

  Czytaj dalej

  CAD:

  2D

  /3D

  Type
  -

  Cena standardowa (bez VAT):

  5.65 €

  Standardowa data wysyłki:

  4 dni robocze

  Konfiguruj
• 

  KIPP

  Positioning cones, Steel, for centring units (K1627)

  · Extremely high repeat accuracy of <0.003 mm· No tilting when joining· Not sensitive to dirt and splinters· Easy handling

  Czytaj dalej

  CAD:

  2D

  /3D

  Type
  -

  Cena standardowa (bez VAT):

  47.08 €

  Standardowa data wysyłki:

  4 dni robocze

  Konfiguruj
• 

  KIPP

  Clamping plates steel for quarter-turn clamp locks (K1560)

  · Fastening screws included· Mounting option for plate thickness starting from 9 mm· Accessory for quarter-turn clamp lock K1559

  Czytaj dalej

  CAD:

  2D

  /3D

  Type
  -

  Cena standardowa (bez VAT):

  15.62 €

  Standardowa data wysyłki:

  4 dni robocze

  Konfiguruj
• 

  KIPP

  Quarter-turn clamp locks stainless steel, knob stainless steel (K1061)

  [Specifications]・Main material: stainless steel・Component material: stainless steel・D=diameter(mm): 5, 8[Features]・Locking element for connecting two separate plates・Click signal when locked・Form A mounting option: for plate thickness 6 or 12 mm・Fastening screws included

  Czytaj dalej

  CAD:

  2D

  /3D

  Type
  -

  Cena standardowa (bez VAT):

  40.71 €～

  Standardowa data wysyłki:

  4 dni robocze

  Konfiguruj
• 

  NORELEM

  Lock bottom parts for quarter turn latches (05592-52)

  · Quick assembly· Vibration-resistant and tolerance-compensating· Suitable for all locking pins

  Czytaj dalej

  Type
  Support Unit

  Cena standardowa (bez VAT):

  1.73 €

  Standardowa data wysyłki:

  4 dni robocze

  Konfiguruj
• 

  NORELEM

  Quarter-turn clamp lock stainless steel, knob stainless steel (05592-10)

  · High clamping forces up to 400 N· Ideal where space is restricted:· Click signal when locked· Fastening screws included· Mounting option for plate thickness 6 to 20 mm

  Czytaj dalej

  Type
  Clamp Unit

  Cena standardowa (bez VAT):

  88.60 €

  Standardowa data wysyłki:

  4 dni robocze

  Konfiguruj
• 

  KIPP

  Locating cylinders pneumatic, Form B (K1219)

  · Fast opening and closing· Pneumatic positioning and clamping system· Reduced changeover times· Quick and easy component assembly

  Czytaj dalej

  CAD:

  2D

  /3D

  Type
  -

  Cena standardowa (bez VAT):

  140.02 €～

  Standardowa data wysyłki:

  4 dni robocze

  Konfiguruj
• 

  NORELEM

  Locating cylinder with wedge clamp system (03156-20)

  · Quick fastening in a bore

  Czytaj dalej

  Type
  Clamp Unit

  Cena standardowa (bez VAT):

  115.74 €～

  Standardowa data wysyłki:

  4 dni robocze

  Konfiguruj
• 

  • Volume Discount

  ASUTEC

  Electric return stop

  Return stops are used in low-friction transfer systems (eg with accumulation roller chain). They prevent rebounding of the workpiece carrier from the separator in the stopping process. Rebounding the workpiece carriers leads to complications in the control of the workpiece carriers since the workpiece carrier is temporarily not at the presumed position. In addition, rebounding has a negative effect on the cycle time, and the components of the transfer system are more strongly loaded by the multiple impact of the workpiece carrier on the separator. Retrun stops may not be used to stop the workpiece carriers in the conveying direction. During transport ot the workpiece carrier in regular transport direction, the pawl of the return stop is pressed down by the workpiece carrier when moving over it.Retrun stops "ASREL" can be lowered electrically for the reversing operation of the conveyor.

  Czytaj dalej

  CAD:

  3D

  Type
  -

  Cena standardowa (bez VAT):

  455.36 €～

  Standardowa data wysyłki:

  15 dni robocze

  Konfiguruj
• 

  KIPP

  Lock bottom parts for quarter turn latches (K1732)

  · Quick assembly· Vibration-resistant and tolerance-compensating· Suitable for all locking pins

  Czytaj dalej

  CAD:

  2D

  /3D

  Type
  -

  Cena standardowa (bez VAT):

  1.39 €

  Standardowa data wysyłki:

  4 dni robocze

  Konfiguruj
• 

  KIPP

  Quarter turn latches, with knurled head (K1730)

  · Small lock with high tensile strength· Opened or closed with a quarter turn· Vibration-resistant and tolerance-compensating· Loss-proof (according to mechanical engineering directive)

  Czytaj dalej

  CAD:

  2D

  /3D

  Type
  -

  Cena standardowa (bez VAT):

  5.65 €

  Standardowa data wysyłki:

  4 dni robocze

  Konfiguruj
• 

  KIPP

  Quarter-turn latches stainless steel rotary knob, stainless steel (K1561)

  · Locking element for connecting two separate plates· Click signal when locked· Ideal where space is restricted:· Mounting option for plate thickness 6 to 14 mm· Fastening screws included

  Czytaj dalej

  CAD:

  2D

  /3D

  Type
  -

  Cena standardowa (bez VAT):

  59.73 €～

  Standardowa data wysyłki:

  4 dni robocze

  Konfiguruj
• 

  NORELEM

  Quarter-turn clamp locks flat (05591)

  · Locking element for connecting two separate plates· Ideal for restricted spaces· Click signal when locked· Form A mounting option: for plate thickness 6 or 12 mm· Fastening screws included

  Czytaj dalej

  Type
  Clamp Unit

  Cena standardowa (bez VAT):

  52.59 €～

  Standardowa data wysyłki:

  4 dni robocze

  Konfiguruj
• 

  KIPP

  Eccentric supports (K0822)

  · Flexible positioning through off-centre fastening hole· Contact faces ground and tempered· Fastened with a socket head screw· Various heights available· For supporting workpieces

  Czytaj dalej

  CAD:

  2D

  /3D

  Type
  -

  Cena standardowa (bez VAT):

  23.16 €～

  Standardowa data wysyłki:

  4 dni robocze

  Konfiguruj