Locating Units

?* Information on days to ship and prices

• 

  Auto-Latch

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.60 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Feed Fingers

  MISUMI

  • Volume Discount

  • Order quantities extended (D-JIT)
  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	Same day

• 

  Pneumatic separator with damping

  ASUTEC

  Separators with damping are made for stopping of one or more accumulated workpiece carriers at a defined stop surface of the workpiece carrier in conveyor systems.They are mainly used where the transport speed is in the middle or high range or when the transported workpieces are sensitive to shocks. Because of the damped stopping of the workpiece carrier, the entire conveyor system is prevented from damage and wear. Optionally, in many variants, the upper and lower position of the stop can be detected with inductive proximity switches or with magnetic field sensors (T-slot sensors).

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	255.57 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Pneumatic separator without damping

  ASUTEC

  Separators without damping are made for stopping of one or more accumulated workpiece carriers at a defined stop surface of the workpiece carrier in conveyor systems.They are mainly used where the transport speed is low or when the transported workpieces are insensitive to shocks. Optionally, in many variants, the upper and lower position of the stop can be detected with inductive proximity switches or with magnetic field sensors (T-slot sensors).

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	91.45 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Feed Fingers / Economy

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.19 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Clamping plates recessed for quarter-turn clamp locks (K1062)

  KIPP

  [Specifications]
  ・Main material: stainless steel, steel
  ・Surface finish body: bright, nickel-plated
  ・D=diameter(mm): 5, 8
  
  [Features]
  ・Form B mounting option for plate thickness over 10mm
  ・Fastening screws included

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.80 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Quarter-turn clamp locks stainless steel, knob plastic (K1061)

  KIPP

  [Specifications]
  ・Main material: steel
  ・Surface finish body: nickel-plated
  ・Component material: plastic
  
  [Features]
  ・Locking element for connecting two separate plates
  ・Click signal when locked
  ・Form A mounting option: for plate thickness 6 or 12 mm
  ・Fastening screws included
  ・Main material: steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	32.38 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Quarter-turn clamp locks stainless steel, knob stainless steel (K1061)

  KIPP

  [Specifications]
  ・Main material: stainless steel
  ・Component material: stainless steel
  ・D=diameter(mm): 5, 8
  
  [Features]
  ・Locking element for connecting two separate plates
  ・Click signal when locked
  ・Form A mounting option: for plate thickness 6 or 12 mm
  ・Fastening screws included

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	40.71 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Quick Shaft Clamp (QSC)

  IMAO CORPORATION

  Lever operation pushes the internal push bar, and shaft is clamped. Unclamp operates when returning lever with plate spring acting on push bar.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	42.18 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Pneumatic return stop

  ASUTEC

  Return stops are used in low-friction transfer systems (eg with accumulation roller chain). They prevent rebounding of the workpiece carrier from the separator in the stopping process. Rebounding the workpiece carriers leads to complications in the control of the workpiece carriers since the workpiece carrier is temporarily not at the presumed position. In addition, rebounding has a negative effect on the cycle time, and the components of the transfer system are more strongly loaded by the multiple impact of the workpiece carrier on the separator. Retrun stops may not be used to stop the workpiece carriers in the conveying direction. During transport ot the workpiece carrier in regular transport direction, the pawl of the return stop is pressed down by the workpiece carrier when moving over it.Retrun stops are also available, which can be lowered pneumatically or electrically for the reversing operation of the conveyor.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	59.52 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Push button latches stainless steel, Form B, without head (K1562)

  KIPP

  [Specifications]
  ・Main material: stainless steel
  ・Surface finish body: bright
  ・Component material: stainless steel
  
  [Features]
  ・For connecting machine parts and workpieces quickly and easily
  ・Mounting option for plate thickness 3 to 27mm
  ・Secure locking by simply pressing and releasing the push button
  ・Ideal for places where space is limited
  ・Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  ・Version 1: without head

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	38.59 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Work Detection Units

  MISUMI

  [Features] It can be used in places that cannot be directly detected by proximity sensors.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  Pneumatic positioning unit

  ASUTEC

  Positioning units are used to precisely position the workpiece carrier after stopping. When the positioning cylinder is extended, the workpiece carrier is centered with suitable locating pins and thus exactly positioned. Typically, the workpiece carrier is lifted by the positioning slightly from the conveyor belt and above pressed against a fixed stop. Thus, the workpiece carrier no longer rests on the conveyor belt and processes on the work piece can occur without vibration. The positioning units are supplied without accessories and have a receiving bore for the insertion of suitable locating pin. In many variants, the upper and lower position of the stop can be detected with inductive proximity switches or with magnetic field sensors (T-slot sensors).

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	207.97 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Linear Stop Motion (LSM)

  IMAO CORPORATION

  Using lever operation linear rail is directly clamped. As clamp is with internal screw, clamping is always regular. Can operate even in narrow gap.
  
  [Features]
  · Easy operation and secure locking.
  · As clamps with internal spring, clamping is always regular.
  · As swivel space for clamping lever is not required, can operate even in small gap as shown in the diagram below.
  · Lever direction can be changed by 90° pitch

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	178.78 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Pneumatic angle damper

  ASUTEC

  Angle dampers dampen workpiece carriers to a stop and are mainly used where workpiece carriers are changing direction at a cross-intersection. For example, when the workpiece carrier is changing its transport direction from a transverse section into a longitudinal section and vice versa. Angle dampers are commonly used in transfer systems were shock-sensitive products are transported.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	259.33 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Cable fasteners stainless steel or plastic in Hygienic DESIGN, cable gland (K1453)

  KIPP

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.53 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Quarter turn latches, with knurled head (K1730)

  KIPP

  · Small lock with high tensile strength
  
  · Opened or closed with a quarter turn
  
  · Vibration-resistant and tolerance-compensating
  
  · Loss-proof (according to mechanical engineering directive)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.65 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing levers, Steel

  GANTER

  With indexing levers GN 215 shafts can be turned through a predetermined angle and positively locked. To index, lift the lever against spring pressure from serrations (one hand control).
  Limiting the indexing angle can be achieved with two dowels (sketch).
  The bushing is connected to the shaft via keyway.
  The location flange is bolted to the machine with two socket head cap screws (M 5).
  
  The lever, via the location pin, provides the connection between shaft and location flange.
  The serrations are protected from swarf and similar particles by the cover. This cover can be inserted by hand (elastic segments engage into a groove) and removed with a screw driver.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	107.26 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Electrical separator with damping

  ASUTEC

  Separators with damping are made for stopping of one or more accumulated workpiece carriers at a defined stop surface of the workpiece carrier in conveyor systems.They are mainly used where the transport speed is in the middle or high range or when the transported workpieces are sensitive to shocks. Because of the damped stopping of the workpiece carrier, the entire conveyor system is prevented from damage and wear. The electrically controlled separators from ASUTEC are available in many different versions. On the one hand, with a motorized drive and integrated evaluation electronics or, on the other hand, with an electrically controlled single-stroke control magnet. The damping is effected by a hydraulic damping unit or by an adjustable air damping system.Benefits of the electrical separators:Elimination of pneumaticEco-Friendly production by abolition of the extract airMinimal energy consumptionIncreased energy efficiencyEasy and very quick installationHigh time and cost savings

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1,166.29 €
  Min. Shipping Days ：	15 Days

  *Unit price with basic configuration

• 

  Push button latches stainless steel, Form A, with head (K1562)

  KIPP

  [Specifications]
  ・Main material: stainless steel
  ・Surface finish body: bright
  ・Component material: stainless steel
  
  [Features]
  ・For connecting machine parts and workpieces quickly and easily
  ・Mounting option for plate thickness 3 to 27mm
  ・Secure locking by simply pressing and releasing the push button
  ・Ideal for places where space is limited
  ・Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  ・Version 1: with head

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	40.43 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Installation kits for position indicators

  GANTER

  The installation kits GN 491.1 are required for the attachment of a position indicator to double tube linear actuators. They consist of an adapter shaft and, depending on the position indicator, a torque support including fixing screws.
  Mechanical position indicators GN 953 / GN 954 / GN 955 must be ordered so that the counter is aligned with the rising of the trapezoidal thread spindle.
  For the position indicators GN 9053 / GN 9054 the respective rising is set at the position indicator for every programming.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.30 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Locating cylinder stainless steel, pneumatic (K1738)

  KIPP

  [Specifications]
  ・Main material: stainless steel
  ・Component material: nitrile rubber
  ・D=diameter(mm): 19
  
  [Features]
  ・Suitable for automation processes
  ・Pneumatic actuation
  ・Compact design
  ・Rust-free

  Select to compare

  Configure now
  Starting from∗ ：	104.08 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Quarter-turn clamp locks, flat stainless steel (K1061)

  KIPP

  [Specifications]
  ・Main material: steel
  ・Surface finish body: nickel-plated
  ・Component material: stainless steel
  
  [Features]
  ・Locking element for connecting two separate plates
  ・Ideal for restricted spaces
  ・Click signal when locked
  ・Form A mounting option: for plate thickness 6 or 12mm
  ・Fastening screws included

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	42.56 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Quick Shaft Clamp (Air Operation) (QSCA)

  IMAO CORPORATION

  Clamp with spring pressure, and unclamping with air pressure, so no worry of lowered clamping force due to air leaks etc. Multiple simultaneous controls possible.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	110.23 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Locating cylinder stainless steel Ball Lock (K1474)

  KIPP

  · Reduced machine setup times
  
  · Simple application

  Select to compare

  Configure now
  Starting from∗ ：	123.35 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Repair kit (K0935)

  KIPP

  Select to compare

  Configure now
  Starting from∗ ：	11.80 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Positioning cones, Steel, for centring units (K1627)

  KIPP

  Material:
  Cone, steel.
  Balls, ball bearing steel.
  Version:
  Cone hardened and ground.
  Balls embedded in rubber which is vucanised on the cones.
  Note:
  In conjunction with the position bushings, the position cones form a centring unit for the high-precision positioning of two components. The system achieves a repeat accuracy of <0.003 mm. The bonded rubber does not become brittle and is insensitive to contamination or swarf. Small embedded swarf splinters do not effect the system.
  Temperature range:
  +80 °C.
  Functional principle:
  When the positioning cone and bush are mated, the balls are pressed together within the rubbers elastic range and thus locate the two parts in which they have been fitted, with maximum accuracy. To ensure that the rubber in which the balls are embedded is deformed within the elastic range, one must merely ensure that the depth of the hole into which the positioning bush is later pressed is precisely observed. The positioning cone is supplied ready to fit into the positioning bush and must simply be fitted into the counterpart component. Henceforth, a precise zero point positioning system is in place.
  

  Select to compare

  Configure now
  Starting from∗ ：	31.38 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Thumb Turn Clamper (QCTH, QCTHL)

  IMAO CORPORATION

  Cam & spring type with lock / unlock state visible at a glance, high visibility with safety mechanism. Knob made of metal is used to reduce chance of damage.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	51.51 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Clamping plates steel for quarter-turn clamp locks (K1560)

  KIPP

  · Fastening screws included
  
  · Mounting option for plate thickness starting from 9 mm
  
  · Accessory for quarter-turn clamp lock K1559

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	15.62 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Positioning units, spring-loaded (K0917)

  KIPP

  Material, Version:
  Body carbon steel, hardened and black oxidised.
  Locating pin hardened tool steel.
  Sample order:
  K0917.15060
  Note:
  * The conical spigot can position holes within these limits.
  

  Select to compare

  Configure now
  Starting from∗ ：	125.90 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Pneumatic separator for roller conveyor system with damping

  ASUTEC

  The separator from ASUTEC for roller conveyor systems have the advantage that they can be usedfor direct integration into roller conveyors because of the specially developed slim design. These separators stop one or more accumulated workpiece carriers on the defined workpiece carrier stop plate in roller conveyor systems. Especially useful are the separator for tight installation spaces between the rollers. The concept developed by Asutec with extreme stability and high resistance to contamination makes these separators universally applicable. For all ASUTEC separators for roller conveyor systems, it is possible to query the upper and the lowered position with inductive proximity switches.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	766.70 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Locating cylinder Ball Lock (K0935)

  KIPP

  · Mechanical positioning and clamping system
  
  · Various sizes
  
  · High retaining forces
  
  · For different thicknesses of clamping plate

  Select to compare

  Configure now
  Starting from∗ ：	101.52 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locating cylinder with quick clamping system (K0935)

  KIPP

  [Specifications]
  ・Main material: high carbon steel
  ・Component material: ball-bearing steel
  ・D=pin diameter(mm): 13, 16,10
  
  [Features]
  ・Fast opening and closing
  ・Mechanical positioning and clamping system
  ・Various sizes
  ・High retaining forces
  ・For different thicknesses of clamping plate

  Select to compare

  Configure now
  Starting from∗ ：	107.53 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Quarter-turn clamp locks stainless steel, knob plastic (K1559)

  KIPP

  · High clamping forces up to 400 N
  
  · Ideal where space is restricted:
  
  · Click signal when locked
  
  · Fastening screws included
  
  · Mounting option for plate thickness 6 to 20 mm

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	62.49 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Support blocks (K0827)

  KIPP

  Material:
  Carbon steel.
  Version:
  Tempered, black oxidised.
  Contact faces ground.
  Sample order:
  K0827.36012020
  Note:
  Support blocks are for placing under long workpieces to prevent bending during machining or clamping. The tapped hole is for mounting fixture elements between the grid holes.
  

  Select to compare

  Configure now
  Starting from∗ ：	113.41 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locating cylinders pneumatic, Form A (K1486)

  KIPP

  Material:
  Housing and clamping cylinder, carbon steel.
  Balls, stainless steel 1.0503.
  Version:
  Housing hardened and black oxidised.
  Contact faces ground.
  Note:
  This positioning and clamping system is especially suitable for installation in fixtures (plates, clamping tower blocks, etc.) in all mounting positions. The modular design allows the number of and distance between the locating cylinders to be ideally adjusted to suit the clamping task. Due to the small diameters, the spacing between the locating cylinders can also be reduced.
  
  The 3 clamping balls are mechanically released through control of the locating cylinder with the "opening" connection. The 3 clamping balls move inward and the fixture can be changed quickly. For clamping, the air is taken from the "opening" connection and the "clamping" connection then receives air on the locating cylinder. The 3 clamping balls are mechanically driven outward again and the new fixture is clamped.
  To achieve optimal retaining force, the locating cylinder remains connected to the air.
  

  Select to compare

  Configure now
  Starting from∗ ：	563.50 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Control levers, Steel

  GANTER

  Control levers GN 223 can also be supplied as standard with:
  Square DIN 79 V + Bore diameter
  Keyway DIN 6885 K + Bore diameter

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.58 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Installation kits for position indicators

  GANTER

  The GN 295 installation kits are needed for mounting a position indicator on linear units. The installation kits comprise an adapter shaft and a torque support including attachment screws.
  Order mechanical position indicators GN 953 / GN 954 / GN 955 with a counter pitch that corresponds to that of the trapezoidal threaded spindle.
  For position indicators GN 9053 / GN 9054, the position indicator pitch is programmed.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	36.30 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Pneumatic accelerator module

  ASUTEC

  Acceleration modules from ASUTEC ensure a noticeable reduction of the cycle times by shortening the time between the individual machining cycles. The acceleration module ensures that the workpiece to be machined leaves the machining station more quickly and thus the next machining cycle can start earlier. The use of an acceleration module is very effective especially in transfer systems with low belt friction, as in the case of an accumulation roller chain conveyor. As soon as the separator lowers and releases the workpiece carrier for further transport, the acceleration module is activated and pushes and accelerates the workpiece carrier. This makes it possible to shorten the cycle times of up to 2 seconds.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	290.66 €
  Min. Shipping Days ：	19 Days

  *Unit price with basic configuration

• 

  Cable fasteners stainless steel or plastic in Hygienic DESIGN, hose (K1461)

  KIPP

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	837.21 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Lock bottom parts for quarter turn latches (K1732)

  KIPP

  · Quick assembly
  
  · Vibration-resistant and tolerance-compensating
  
  · Suitable for all locking pins

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.39 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Quarter-turn clamp lock steel, rotary knob stainless steel (K1558)

  KIPP

  · Locking element for connecting two separate plates
  
  · With retractable shank, ideal for places where space is limited
  
  · Click signal when locked
  
  · Mounting option for plate thickness 6 to 14 mm
  
  · Fastening screws included

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	62.49 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Quarter-turn clamp locks stainless steel, knob stainless steel (05591)

  NORELEM

  · Locking element for connecting two separate plates
  
  · Click signal when locked
  
  · Form A mounting option: for plate thickness 6 or 12 mm
  
  · Fastening screws included

  Select to compare

  Configure now
  Starting from∗ ：	50.33 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Adjustable Tenison levers, Stainless Steel

  GANTER

  Adjustable tension levers GN 212.5 have proved to be ideal whenever parts have to be clamped in a confined space or a particular lever position is re-quired. The threaded insert is connected with the hub via serrations which can be disengaged.
  Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever it will automatically re-engage.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	31.34 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Control levers, Steel

  GANTER

  Control levers GN 211 can be used in connection with indexing elements, grooves for angle limitations and such like due to their comparably big hub diameter.
  Spring plungers as well as indexing plungers can be used as indexing elements.
  Control levers GN 211 can also be supplied as standard with:
  Square DIN 79 V + Bore diameter
  Keyway DIN 6885 K + Bore diameter

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.48 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

Loading...