Guide Elements

?* Information on days to ship and prices

• 

  V Blocks / Precision Class

  MISUMI

  [Features] As for the precision grade block, the pick-up position of the workpiece is checked. [Material] Equivalent to JIS-SKS (TS for cold work)3.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	74.91 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Eccentricity Clamp Bolt SLEC-A

  NABEYA BI-TECH

  Bolt clamp for fixing rails for linear guideways / fixing workpieces and jigs.
  [Features]
  ·When tightened, the head of the screw that is eccentric to the axis will clamp the workpieces powerfully.
  ·Due to the wedge effect, a large clamping force can be obtained with a small tightening torque.
  ·Uses a hexalobular hole that can withstand high tightening torque.
  ·Please use the dedicated SKX for installation and removal.
  ·Suitable for fixing rails for linear guideways.
  ·By pressing the rail for the linear guideway against the reference surface, it is easy to obtain accuracy during mounting.
  ·Maintains mounting accuracy by suppressing warpage and misalignment due to long-term use.
  

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.70 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Guides / L-Shaped

  MISUMI

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	6 Days

• 

  Guides / V-Shaped

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	15.18 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Guides / Straight

  MISUMI

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	6 Days

• 

  Eccentricity Clamp Bolt SLEC-A-EL

  NABEYA BI-TECH

  When tightened, the head of the screw that is eccentric to the axis will clamp the workpieces powerfully.
  [Features]
  ·Due to the wedge effect, a large clamping force can be obtained with a small tightening torque.
  ·Use the dedicated wrench SKX for installation and removal.
  ·Suitable for fixing rails for linear guideways.
  ·The eccentric head attaches the linear guideway rail and presses it against the reference surface, making it easy to obtain accuracy during installation.
  ·In addition, it suppresses warpage and misalignment due to long-term use, and maintains mounting accuracy.
  ·SLEC-A-EL is an electroless nickel plating type.
  ·For applications that require corrosion resistance.
  [Applications]
  ·Fixing rails for linear guideways / fixing workpieces and jigs.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.42 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Eccentric Clamp Bolt SLEC-B

  NABEYA BI-TECH

  ● When tightened, the head of the screw that is eccentric to the axis will clamp powerfully to the workpieces. Due to a wedge effect, a large clamping force can be obtained with a small amount of tightening torque.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.32 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Roller Pushers / Low Particle Generation Type

  MISUMI

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	6 Days

• 

  Base Plates, V70eco

  HALDER

  V70eco base plates are a further development of the established V70 product line, optimized in quality and price.
  They are fully compatible with the existing V70 T-slot System.
  • Centers to H6 tolerance and slots to H8 tolerance.
  • Alignment of the base plate on the machine table by means of centers and/or centering slot.
  • Fastening holes on a 100 mm pitch.
  • High tensile tool steel.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2,314.40 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Thrust Angles

  HALDER

  [Specifications]
  ・Material: Grey cast iron, phosphatized, ground
  ・b(mm): 24.5~66
  ・System: V40, V70
  
  Thrust Angles

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	174.11 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Guides / Height Adjusting

  MISUMI

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	6 Days

• 

  V Blocks / Standard / T-Shaped

  MISUMI

  [Features] This prism block can be used as a guide or support for round workpieces.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	36.95 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Guides / Pedestal

  MISUMI

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	6 Days

• 

  Guides/ Angle

  MISUMI

  It has a slotted hole for adjustment and the squareness of 0.05 is guaranteed.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	6 Days

• 

  Clamping Jaws, for floating clamp M 12 / lower clamping jaw with flat-faced ball and pivot function, plain surface, protected against rotating

  HALDER

  The clamping jaws can be used for the floating clamps 23320.0008, 23320.0012 and 23320.0014.
  The upper clamping jaw (23320.0054, 23320.0056 abd 23320.0058 - picture 1-3) can be used to increase the clamping range.
  In the upper clamping jaw with female thread M 8 (23320.0154 / .0156 - picture 4 + 5) different standard parts can be screwed in as required.
  The lower clamping jaw with pivot function (23320.0148 - picture 6) adapts to the draughts of the workpiece.

  Select to compare

  Configure now
  Starting from∗ ：	145.45 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Guides / Plates

  MISUMI

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	6 Days

• 

  Spacers

  HALDER

  [Specifications]
  ・Material: Steel, case-hardened, ground
  ・d1(mm): 8.5, 13
  ・d2(mm): 24, 39.5, 59.5
  ・System: L12, V40
  
  This mounting element is a system part of the T-slot system.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	15.14 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Jaw pads for centric vice 65-80-125 mm, Form C, cross-serrated (K0598)

  KIPP

  · Suitable for attachment jaws, stepped
  
  · For blank or pre-machined workpieces
  
  · Hardened

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	60.89 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping rail, steel (02395)

  NORELEM

  · Flexible application
  
  · Diagonal fastening possible
  
  · Fastening at 50, 63 and 100 mm intervals

  Select to compare

  Configure now
  Starting from∗ ：	229.12 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Guide Plates

  MISUMI

  [Features] This is a guide plate for guiding workpieces.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.52 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Aligning and Fixing Sets

  HALDER

  For aligning (positioning) and fastening the vice on the machine table.
  Size according to T-slot or thread in the machine table.

  Select to compare

  Configure now
  Starting from∗ ：	179.77 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Base Jaws, hard

  HALDER

  One side smooth and ground, one side serrated. Additional threads for parallels and for mounting the interchangeable jaws (Art. No. 1701.250-1701.280) on the smooth side. Mountings for click system (Art. No. 1701.190-1701.200) on both sides of the jaw.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	407.32 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Clamping Cubes

  HALDER

  [Specifications]
  ・Material: Grey cast iron GG
  ・l1(mm): 400, 500, 630
  ・System: L12, L16
  
  Clamping Cubes EH 1508.200-EH 1608.600

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7,152.35 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Gripper Strips, reversible

  HALDER

  Gripper strip can be reversed for mounting on the five-sided machining jaw (4 of them are required). For clamping unmachined parts close to the edge, 3 or 5 mm. Incl. 2 mounting screws M 6 x 16 each (Art. No. 1704.600).

  Select to compare

  Configure now
  Starting from∗ ：	153.12 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Insertion Tools

  HALDER

  Keeps the workpiece in position during the clamping process.

  Select to compare

  Configure now
  Starting from∗ ：	309.51 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Intermediate Plates / Steel, case-hardened, ground / V70

  HALDER

  [Specifications]
  ・Material: Steel, case-hardened, ground
  ・h(mm): 20, 30
  ・System: V70
  
  T-Slot Systems Mounting Elements, Intermediate Plates EH 1111.700-EH 1111.800

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	352.00 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Master Jaw Adapters

  HALDER

  High side of the jaw is hardened. Additional thread for mounting the interchangeable jaws (Art. No. 1701.250 - 1701.280). Ground clamping surfaces. Mountings for click system (Art. No. 1701.190 -1701.200) on the high side of the jaw.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	445.28 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Multi-Vices, MS 125

  HALDER

  Scope of application:
  Can be applied horizontally and vertically - therefore suitable for vertical and horizontal CNC milling machines. Conventional clamping, gripper clamping or pull-down clamping are all possible. MS 125-S - ideal for use on five-axis machining centres. Clamping of unmachined parts, saw-cut or flame-cut material by penetration of hardened, replaceable gripper elements into the workpiece. With the support jaws, unmachined parts in highly varied materials, or with complex geometries, can be clamped securely and economically.
  Product features:
  High versatility - the modular clamping system combines practically all the possibilities of our tried-and-tested models. High-pressure spindle with power intensification - clamping force does not slacken. Enlarged clamping span for secure clamping of unmachined parts. Lost clamping margin 8 mm with pull-down clamping, 3 mm with gripp clamping. Clamping with torque wrench (max. 30 Nm) - this makes it possible to work above the table with an unfavourable clamping arrangement on the tool.
  Scope of supply:
  1 high-pressure vice without jaws. 1 set of side clamps. 3 socket screw wrenches. Hexagonal insert for torque wrench 3/8"
  Please order the clamping jaws separately.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2,749.75 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Multi-Vices, MS 125eco

  HALDER

  The all-round clamping system is a classic for conventional clamping and gripp clamping. It is suitable for all common milling. Clamping of unmachined parts, saw-cut or flame-cut material by penetration of hardened, replaceable gripper elements into the workpiece.
  The MS 125eco is designed for fast machining of unmachined/semi-finished parts as well as of finished products. It is equally suitable for gripp clamping in the first clamping as well as for conventional clamping in the second clamping without refitting. ground jaws for high precision in the machining of workpieces. high-pressure spindle with mechanical power intensifier (operation with torque wrench). up to 40 kN clamping force (linearly increasing, at max. 30 Nm). solid base made of GGG 60, top and bottom surface ground. threats M8 on both sides for workpiece stop. precise alignment slots in the ground bottom surface for an optimal alignment on the machine table
  Scope of supply:
  1 piece MS 125eco. 1 set step jaws for gripper studs. 4 pieces gripper studs, pointed. 4 pieces clamping elements. 3 pieces wrenches
  All components of the product ranges "conventional clamping" and "gripp clamping" as well as the accessories for the Multi-Vice MS 125 are fully compatible to MS 125eco. For horizontal machining Halder basic elements (angles/cubes) can be used.

  Select to compare

  Configure now
  Starting from∗ ：	2,340.67 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Positioning Clamping Cylinders

  HALDER

  [Specifications]
  ・Material: Steel, case-hardened, ground
  ・d(mm): 40, 50
  ・d1(mm): 12, 16
  ・System: L12, L16
  
  Positioning Clamping Cylinders EH 1553.500-EH 1653.500

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	112.89 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Stops, plain

  HALDER

  [Specifications]
  ・Body: Tool steel, hardened
  ・b1(mm): 44
  ・b2(mm): 24, 29
  ・d(mm): 12
  
  Stops, plain EH 1586.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	136.52 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Stops, vertical prisms

  HALDER

  [Specifications]
  ・Body: Tool steel, hardened
  ・b1(mm): 44
  ・h1(mm): 21.4
  
  Stops, vertical prisms EH 1586.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	169.34 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Supporting Plates, for universal gripper set

  HALDER

  Supporting plate for universal gripper set (Art. No. 1702.600)