Linear Shafts（Page 2）
Filter products by: Basic Shape
?* Information on days to ship and prices
-
Linear shafts / hollow / one-sided internal thread / spanner flat
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 7 Days -
Linear shafts / stepped on one side / external thread / undercut / flat / radial bore / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7. Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear Shafts / X46Cr13 (material no. 1.4034)
INA
[Specifications]
・Material: corrosion-resistant steel (material no.:1.4034)
・Tolerance diameter: h6
Solid shafts, with axial and/or radial threaded holes.Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / hollow / stepped on two sides
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 7 Days -
Linear shafts / material selectable / treatment selectable / stepped on one side / external thread / internal thread
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / double-sided external thread
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / material selectable / treatment selectable / stepped on both sides / internal thread / spanner flat
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / set on one side / external thread / internal thread / undercut
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
SUS304 Precision Shaft (Long Size) SRU
HIROSUGI-KEIKI
[Materials]
· SRU-1200: RS323 (SUS304 equivalent, high hardness non-magnetic stainless steel)
· SRU-1500/2000: NS15MN (same as above)
· SRU-300/400/2500: SUS303
[Processing] DegreasedConfigure nowStarting from∗ ： 0.39 € Min. Shipping Days ： 19 Days *Unit price with basic configuration
-
Linear shafts / stepped on both sides / external thread / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 30 mm / [ISO-Tolerance] h6/h7. Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / hollow / external thread on one side, internal thread
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 7 Days -
Linear shafts / material selectable / treatment selectable / stepped on one side / two-sided internal thread / spanner flat
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / external thread / internal thread / undercut / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7. Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / external thread / internal thread / hexagon socket with centring hole
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / material selectable / treatment selectable / stepped on both sides / external thread / Wrench flat / Radial bore
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / external thread / internal thread / undercut / flat / radial bore / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7. Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / hollow / stepped on one side / internal thread
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 7 Days -
Linear shafts / stepped on one side / internal thread on both sides / wrench flat / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7. Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / internal thread on one side / internal thread on both sides / h6 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 20 mm / [ISO-Tolerance] h6. Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / hollow / two-sided external thread
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 7 Days -
Linear shafts / offset on one side / external thread / internal thread / undercut / spanner flat
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 9 Days -
Linear shafts / stepped on one side / stepped on both sides / external thread / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7. Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / one-sided external thread
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / material selectable / treatment selectable / stepped on both sides / external thread / undercut / spanner flat / radial bore
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / hollow / external thread on one side / spanner flat
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 7 Days -
Linear shafts / stepped on one side / external thread / internal thread / internal thread with centring hole / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 12 - 30 mm / [ISO-Tolerance] h6/h7. Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / external thread / internal thread / hexagon socket with centring hole / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 20 mm / [ISO-Tolerance] h6/h7. Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / external thread / wrench flat / radial bore / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 30 mm / [ISO-Tolerance] h6/h7. Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / internal thread / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7. Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Configure now
Min. Shipping Days ： 7 Days -
Linear shafts / material selectable / treatment selectable / stepped on one side / internal thread / spanner flat
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / groove on one side / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 30 mm / [ISO-Tolerance] h6/h7. Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / set screw groove on one side / set screw groove on both sides / external thread / internal thread / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 30 mm / [ISO-Tolerance] h6/h7. Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / external thread / undercut / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7. Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / external thread / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 30 mm / [ISO-Tolerance] h6/h7. Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Solid Shafts, Chrome
INA
[Specifications]
・Material: Heat treatable steel (material no.:1.1213)
・Coating: Chrom
・Tolerance diameter: h7
Solid shafts, with axial and/or radial threaded holes.Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / material selectable / treatment selectable / stepped on both sides / internal thread / undercut / spanner flat
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 9 Days -
Linear shafts / stepped on both sides / external thread / undercut / wrench flat / radial bore / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7. Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on both sides / external thread / wrench flat / Radial bore / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 30 mm / [ISO-Tolerance] h6/h7. Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / material selectable / treatment selectable / double stepped on one side / external thread / internal thread / undercut
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / external thread / internal thread / internal thread with centring hole
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / offset on one side / external thread / internal thread / spanner flat
MISUMI
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 9 Days -
Linear shafts / stepped on one side / external thread / internal thread / wrench flat / radial bore / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 6 - 30 mm / [ISO-Tolerance] h6/h7. Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on one side / internal thread on one side / internal thread on both sides / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7. Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days -
Linear shafts / stepped on both sides / internal thread / wrench flat / h6, h7 / Cf53 / EN 1.1213
MISUMI
Configurable in [Length] 20 - 1200 mm / [Diameter] 8 - 30 mm / [ISO-Tolerance] h6/h7. Available [Material] EN 1.1213. [Hardening] Induction hardened and [Surface treatment] Hard Chrome Plating.
MISUMI advantages are high configurability, low price, high quality. In addition, we offer a short delivery time, no minimum order quantity and high availability.- EU specification
- EU production
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 4 Days
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| RoHS Information |
| Basic Shape |
| Features, Areas of application |
| Shaft end Shape (Left) |
| Shaft end Shape (Right) |
| Tightening Type |
| Shaft end Perpendicularity |
| [D] Diameter (Shaft)(mm) |
| Material |
| Heat Treatment |
| Surface Treatment |
| ISO Tolerance |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | INA | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | HIROSUGI-KEIKI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | INA | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | Linear shafts / hollow / one-sided internal thread / spanner flat | Linear shafts / set on one side / external thread / internal thread / undercut | Linear shafts / stepped on both sides / external thread / h6, h7 / Cf53 / EN 1.1213 | Linear shafts / hollow / external thread on one side, internal thread | Linear shafts / hollow / stepped on one side / internal thread | Linear shafts / internal thread on one side / internal thread on both sides / h6 / Cf53 / EN 1.1213 | Linear shafts / offset on one side / external thread / internal thread / undercut / spanner flat | Linear shafts / hollow / external thread on one side / spanner flat | Linear shafts / stepped on one side / internal thread / h6, h7 / Cf53 / EN 1.1213 | Linear shafts / groove on one side / h6, h7 / Cf53 / EN 1.1213 | Linear shafts / stepped on one side / external thread / undercut / h6, h7 / Cf53 / EN 1.1213 | Linear shafts / stepped on one side / external thread / h6, h7 / Cf53 / EN 1.1213 | Linear shafts / offset on one side / external thread / internal thread / spanner flat | Linear shafts / stepped on both sides / internal thread / wrench flat / h6, h7 / Cf53 / EN 1.1213 | |||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| Starting from∗ | - | - | - | - | - | - | - | - | 0.39 € *Unit price with basic configuration | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Min. Shipping Days | 7 Days | 4 Days | 4 Days | 7 Days | 4 Days | 4 Days | 4 Days | 4 Days | 19 Days | 4 Days | 7 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 7 Days | 4 Days | 4 Days | 7 Days | 9 Days | 4 Days | 4 Days | 4 Days | 7 Days | 4 Days | 4 Days | 4 Days | 4 Days | 7 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 9 Days | 4 Days | 4 Days | 4 Days | 4 Days | 9 Days | 4 Days | 4 Days | 4 Days |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
| RoHS Information | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Basic Shape | Hollow | Solid, One End Stepped | - | Hollow, Both Ends Stepped | Solid | Solid | Solid, Both Ends Stepped | Solid | Solid | Solid, Both Ends Stepped | Hollow | Solid, One End Stepped | Solid, One End Stepped | Solid | Solid | Solid, One End Stepped | Hollow, One End Stepped | Solid, One End Stepped | Solid | Hollow | Solid | Solid, One End Stepped / Solid, Both Ends Stepped | Solid | Solid | Hollow | Solid / Solid, One End Stepped | Solid / Solid, One End Stepped | Solid, One End Stepped | Solid, One End Stepped | Solid | Solid, One End Stepped | Solid | Solid / Solid, One End Stepped | Solid, One End Stepped | Solid, One End Stepped | - | Solid, Both Ends Stepped | Solid, Both Ends Stepped | Solid, Both Ends Stepped | Solid, One End Stepped | Solid | Solid | Solid, One End Stepped | Solid, One End Stepped | Solid, Both Ends Stepped |
| Features, Areas of application | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shaft end Shape (Left) | Internal thread | External thread | - | Straight | External thread | External thread | Internal thread | External thread | Straight | External thread | External thread | Internal thread | External thread | Internal thread / External thread | External thread | External thread | Straight | Internal thread | Internal thread | External thread | External thread | External thread | External thread | External thread | External thread | Internal thread / External thread | Internal thread / External thread | External thread | Straight / Internal thread | Straight | Internal thread | Keyway | Straight / Internal thread / External thread / Set screw groove | External thread | External thread | - | Internal thread | External thread | External thread | External thread | Internal thread / External thread | External thread | External thread | Straight / Internal thread | Internal thread |
| Shaft end Shape (Right) | Straight | Straight | - | Straight | Internal thread | External thread | Internal thread | Internal thread | Straight | External thread | Internal thread | Internal thread | Internal thread | Hex socket | External thread | Internal thread | Internal thread | Internal thread | Straight / Internal thread | External thread | Internal thread | Straight / External thread | Straight | External thread | Straight | Positioning Hole and internal thread | Hex socket | Straight | Straight | Straight | Straight | Straight | Set screw groove | Straight | Straight | - | Internal thread | External thread | External thread | Internal thread | Positioning Hole and internal thread | Internal thread | Internal thread | Internal thread | Internal thread |
| Tightening Type | - | Wrench flats / Cross-drilled hole | - | - | - | - | - | - | No machining | No machining | - | - | No machining | - | - | Wrench flats / Cross-drilled hole | - | Wrench flats | No machining | - | - | No machining | - | - | - | No machining | No machining | Wrench flats / Cross-drilled hole | No machining | - | - | No machining | No machining | No machining | No machining | - | - | Wrench flats | Wrench flats / Cross-drilled hole | - | - | - | Wrench flats / Cross-drilled hole | No machining | Wrench flats |
| Shaft end Perpendicularity | - | 0.2 | - | - | 0.2 | 0.2 | 0.2 | 0.2 | - | 0.2 | - | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | - | 0.2 | 0.2 | - | 0.03 | 0.2 | 0.2 | 0.2 | - | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | - | 0.2 | 0.2 | 0.2 | - | 0.03 | 0.2 | 0.2 | 0.2 | 0.2 | 0.03 | 0.2 | 0.2 | 0.2 |
| [D] Diameter (Shaft)(mm) | 6 ～ 50 | 8 ～ 30 | 25 ～ 40 | 6 ～ 50 | 4 ～ 50 | 3 ～ 30 | 8 ～ 50 | 8 ～ 50 | 1.5 ～ 5 | 6 ～ 30 | 6 ～ 40 | 8 ～ 50 | 8 ～ 30 | 6 ～ 20 | 6 ～ 50 | 8 ～ 30 | 6 ～ 50 | 8 ～ 30 | 6 ～ 20 | 6 ～ 40 | 8 ～ 30 | 8 ～ 30 | 3 ～ 30 | 8 ～ 50 | 6 ～ 40 | 12 ～ 30 | 6 ～ 20 | 6 ～ 30 | 8 ～ 30 | 10 ～ 50 | 8 ～ 50 | 6 ～ 30 | 6 ～ 30 | 8 ～ 30 | 6 ～ 30 | 12 ～ 60 | 8 ～ 30 | 8 ～ 30 | 6 ～ 30 | 8 ～ 50 | 12 ～ 30 | 5 ～ 30 | 6 ～ 30 | 8 ～ 30 | 8 ～ 30 |
| Material | Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel | - | Alloyed Steel | Unalloyed Steel / Stainless Steel (austenitic) / Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel / Stainless Steel (austenitic) / Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel / Stainless Steel (austenitic) / Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel / Stainless Steel (austenitic) / Alloyed Steel / Stainless Steel (martensitique) | Stainless Steel (martensitique) | Unalloyed Steel | Alloyed Steel | Unalloyed Steel / Stainless Steel (austenitic) / Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel | Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel / Stainless Steel (austenitic) / Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel | Alloyed Steel | Unalloyed Steel | Unalloyed Steel | Alloyed Steel | Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel | Unalloyed Steel / Stainless Steel (austenitic) / Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel / Stainless Steel (austenitic) / Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel / Stainless Steel (austenitic) / Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel | - | Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel / Stainless Steel (austenitic) / Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel / Stainless Steel (martensitique) | Alloyed Steel / Stainless Steel (martensitique) | Unalloyed Steel | Unalloyed Steel | Unalloyed Steel |
| Heat Treatment | Induction Hardened | Induction Hardened | - | Induction Hardened | No Treatment / Induction Hardened | No Treatment / Induction Hardened | No Treatment / Induction Hardened | No Treatment / Induction Hardened | - | Induction Hardened | Induction Hardened | No Treatment / Induction Hardened | Induction Hardened | Induction Hardened | No Treatment / Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | No Treatment / Induction Hardened | No Treatment / Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | No Treatment / Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | - | Induction Hardened | Induction Hardened | Induction Hardened | No Treatment / Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened | Induction Hardened |
| Surface Treatment | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating | - | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating | No Treatment | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating | - | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating / LTBC Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating | No Treatment / Hard Chrome Plating |
| ISO Tolerance | g6 | h6 ～ h7 | - | g6 | h5 ～ f8 | h5 ～ f8 | h5 ～ f8 | h5 ～ f8 | h5 | h6 ～ h7 | g6 | h5 ～ f8 | h6 ～ h7 | g6 | h5 ～ f8 | h6 ～ h7 | g6 | h6 ～ h7 | h6 | g6 | g6 | h6 ～ h7 | h5 ～ f8 | h5 ～ f8 | g6 | h6 ～ h7 | h6 ～ h7 | h6 ～ h7 | h6 ～ h7 | g6 | h5 ～ f8 | h6 ～ h7 | h6 ～ h7 | h6 ～ h7 | h6 ～ h7 | - | g6 | h6 ～ h7 | h6 ～ h7 | h5 ～ f8 | g6 | g6 | h6 ～ h7 | h6 ～ h7 | h6 ～ h7 |
Loading...
Filter by:
Stock
-
- Show only stock items
-
RoHS Information
-
Features, Areas of application
-
Shaft end Shape (Left)
-
Shaft end Shape (Right)
-
Tightening Type
-
Shaft end Perpendicularity
- 0.2
- 0.03
-
[D] Diameter (Shaft)(mm)
-
Material
-
Heat Treatment
-
Surface Treatment
-
ISO Tolerance
CAD data type
-
- 2D
- 3D
Standard shipping days
-
- All
- Same day
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 11 Days or Less
- 12 Days or Less
Examples how you can use these components
Categories related to Linear Shafts
-
- Linear Shafts
- Shaft Supports / Shaft Holders
- Set Collars / Clamping Rings
- Linear Bushings / Linear Ball Bearings / Linear Ball Bushings
- Ball Guides
- Spline Shaft
- Plain Bearing (Bushings, Washers, Semifinished Products)
- Plain Bearing (Plates, Guide Rails, Semifinished Products)
- Linear Guides
- Cable Carriers
- Ball Screws
- Support Units
- Lead Screws, Slide Screws
- Cross Roller
- Slide Packs, V Guides, Linear Rails
- Actuators
- Other Linear Motion Related Components
- Bellows
-
Metody płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.