YAMAWA MFG Screw-Hole-Related Tools（work material：Brass cast iron (BsC)）
Search by sub-category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Promotional pricing ends 30/11/2024
Hand Tap HT (Cutting Tap)
YAMAWA MFG
Hand tap used for general tapping work.
[Features]
・ High blade tip strength makes it easy for regrinding.
・ More suitable for manual work compared to taps of other shapes.
・ 2 types are available, with 5P or 1.5P chamfered threads.
・ When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.
・ Machining with mechanical machinery is also possible.
・ Has straight grooves out of consideration for cutting chip stow.
・ Suitable for work materials whose cutting chips are powder or small coiled close to the powder.
[Applications]
・ Ideal for threading SPC/SPH and other thin plates or SS400/S20 or below mild steel.- Volume Discount
- Stock
Starting from∗ ： 6.44 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Spiral Flute Tap SP (N-SP)
YAMAWA MFG
The spiral flute tap is ideal for machining blind holes as cutting chip is discharged from the grooves twisted in the same direction as the threads.
[Features]
・ The grooves are twisted in the same direction as the threads for not only good scrap discharging performance but also great cutting performance.
・ Intermittent cutting of female threads with keyway is also possible.
・ Capable of machining both synchronously and asynchronously.
・ Ideal for machining blind holds as the groove is twisted, continuous small coiled scraps are discharged to the rear, and it does not cause cutting chip clogging.
・ Ideal for tapping especially sticky work materials, plastics, etc. due to its sharpness.
・ The tap can easily cut.
・ Intermittent cutting of pilot holes with keyway is also possible.
・ Since the blade strength is inferior to HT, the HT shape is more suitable for hard materials.
[Applications]
・ Ideal for machining blind holes.- Volume Discount
Starting from∗ ： 8.94 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spiral Tap for Aluminum AL+SP / AL-SP
YAMAWA MFG
A tap that enables high speed, stable machining of light alloys such as aluminum die casting or forged aluminum.
[Features]
· Optimal blade design limits the internal diameter burrs that tend to appear when cutting threads into light alloy.
· Stable, clean thread machining can be performed.
[Applications]
· Stable thread machining of light alloy such as aluminum die casting or forged aluminum at high speed.
· Can be used not only with aluminum, but also other materials such as brass, bronze, magnesium castings, and zinc alloy castings.- Volume Discount
Starting from∗ ： 11.86 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Hand Tap for Left-Hand Threads HT(LH)
YAMAWA MFG
It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.- Volume Discount
Starting from∗ ： 21.36 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plus Series Spiral Tap +SP (N+SP)
YAMAWA MFG
A spiral tap suitable for medium- to high-speed machining with machining centers, etc.
[Features]
· Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.
[Applications]
· Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).- Volume Discount
Starting from∗ ： 17.48 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Plus Series Point Tap +PO (N+PO)
YAMAWA MFG
* N+SP will be replaced with +SP as soon as there is no more in stock.- Volume Discount
Starting from∗ ： 10.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Point Tap PO(N-PO)
YAMAWA MFG
A point tap convenient for through-hole machining as scraps are ejected forward.
[Features]
· Slanting the groove on the cutting edge of the biting part pushes the scraps forward.
· Minimal scrap issues.
· Low cutting torque.
· Capable of machining both synchronously and asynchronously.
[Applications]
· Ideal for machining through-holes.
* N-PO models will transition to PO as soon as stock runs out.- Volume Discount
Starting from∗ ： 15.26 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
For Tapered Screw for Pipe (Short Screw Type) S-PT
YAMAWA MFG
A cutting tap used for screw tapping in connecting pipes and pipe parts where the main purpose is mechanical connection. Can be used for machining tapered threads requiring durability such as water pipes and gas pipes- Volume Discount
Starting from∗ ： 21.41 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Carbide Hand Tap for Cast Iron N-CT FC
YAMAWA MFG
A carbide tap suitable for thread machining of hard and brittle material such as cast iron.Starting from∗ ： 106.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
HF Spiral Tap for Through Holes Used in Series Dry Machining of Carbon / Alloy Steel HDISL
YAMAWA MFG
We have adopted the side through-hole shape by dry machining and ultra-high-speed machining.- Volume Discount
Starting from∗ ： 36.15 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
HF Series Ultra-High Speed Spiral Tap for Cast Aluminum / Die Cast Aluminum HFAHS
YAMAWA MFG
Uses a center through hole shape that supports internally lubricating machines, and can perform ultra high speed machining. It is suitable for blind hole such as cast aluminum, and it is for the vertical direction processing.- Volume Discount
Starting from∗ ： 36.15 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
HF Series Ultra-High Speed Spiral Tap for Cast Aluminum / Die Cast Aluminum HFASP
YAMAWA MFG
Uses a center through hole shape that supports internally lubricating machines, and can perform ultra high speed machining. It is suitable for blind hole such as cast aluminum, and it is for the horizontal direction processing.- Volume Discount
Starting from∗ ： 36.15 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
H Series Dry Machining Spiral Tap for Cast Aluminum / Die Cast Aluminum HDASP
YAMAWA MFG
Uses a center through hole shape that supports internally lubricating machines, and can perform both mist and dry machining. Suitable for blind holes on aluminum castings, processing in vertical and horizontal directions.- Volume Discount
Starting from∗ ： 36.15 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
MC - Helical Cutter MC-HLC
YAMAWA MFG
A screw processing tool that utilizes the "helical feed" function. Female threading of different diameters can be done with a single tool, provided the pitch is the same, and either right- or left-handed female screws can be machined.Starting from∗ ： 253.22 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Titanium coating point tab PO-V (N-PO-V)
YAMAWA MFG
Coated point tap suitable for low carbon steel to high carbon steel machining.
[Features]
· Since it has a coating, stable processing is possible at medium cutting speeds, and the tool life is improved.
[Applications]
· Can process both synchronously and asynchronously.
· Recommended for machining speeds of 10 to 20 m/min (completely synchronous feeding recommended for speeds of 15 m/min or higher).- Volume Discount
Starting from∗ ： 25.02 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Titanium Coated Through Hole Spiral Tap AU+SL
YAMAWA MFG
Coated Spiral Tap For Through Hole Drilling Suited For Stable Mid-Speed (10 to 25m/minute) Threading in Both Synchronous and Asynchronous Machining- Volume Discount
Starting from∗ ： 21.06 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spiral Tap for Titanium Alloy, for Through Hole ZET-P
YAMAWA MFG
A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.- Volume Discount
Starting from∗ ： 21.37 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Coating Spiral Tap AU+ SP
YAMAWA MFG
Coating spiral tap with blind holes has a screw part that leaves behind complete threads and its special form sweeps away half of the screw threads afterwards + unique groove form helps maintain the discharge of scraps and has achieved in reducing friction.- Volume Discount
Starting from∗ ： 21.66 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Long Shank Spiral Tap LS-SP(LS-N-SP)
YAMAWA MFG
* LS-N-SP will switch to LS-SP as soon as the stock runs out.- Volume Discount
Starting from∗ ： 19.63 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Long Shank Titanium Coated Spiral Tap LS-SP-V(LS-N-SP-V)
YAMAWA MFG
* LS-N-SP-V will switch to LS-SP-V as soon as the stock runs out.- Volume Discount
Starting from∗ ： 37.13 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Long Shank Titanium Coated Point Tap LS-PO-V(LS-N-PO-V)
YAMAWA MFG
* LS-N-PO-V will switch to LS-PO-V as soon as the stock runs out.- Volume Discount
Starting from∗ ： 37.13 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
For Tapered Screw for Pipe (Short Screw Type Spiral) SP-S-PT
YAMAWA MFG
A cutting tap used for screw tapping in connecting pipes and pipe parts where the main purpose is mechanical connection. Can be used for machining tapered threads requiring durability such as water pipes and gas pipes- Volume Discount
Starting from∗ ： 26.01 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
For Tapered Screw for Pipe (Short Screw Type for Use with Cast Iron Hard) CT-S-PT
YAMAWA MFG
With a short male thread and female thread installation length, this is a carbide hand tap for cast iron conical pipe threads with a short thread form, suitable for series machining of hard and brittle materials such as cast iron. [Features] Tap 2.5P; straight groove shape of the hand tap.Starting from∗ ： 224.47 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
For Tapered Screw for Pipe (Long Screw Type Long Shank) LS-PT
YAMAWA MFG
For standard pipe taps, it is used when the protruding length of the screw is insufficient.- Volume Discount
Starting from∗ ： 45.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
For Tapered Screw for Pipe (Long Screw Type for Use with Cast Iron Hard) CT-PT
YAMAWA MFG
The main purpose of this product is to ensure the tightness of the threaded section when joining pipe parts, etc. It is a carbide hand tap for cast iron tapered pipe threads, suitable for mass production of threads in hard and brittle materials such as cast iron. [Features] Tap 2.5P; straight flute shape of the hand tap.Starting from∗ ： 206.91 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
For Parallel Screw for Pipe (Hard) CT-PF
YAMAWA MFG
This is a carbide hand tap for parallel pipe threads, suitable for mass production of threads in hard and brittle materials such as cast iron. [Features] Chamfer 3.5P; straight carbide hand tap with groove.Starting from∗ ： 177.64 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
For Parallel Screw for Pipe (Hard) CT-PS
YAMAWA MFG
The main purpose of this product is to ensure the tightness of the threaded section when joining pipe parts, etc. This is a hand tap for parallel pipe threads made of carbide, suitable for mass production with hard and brittle materials such as cast iron. Machined PS internal threads are mated with PT external threads. [Features] Chamfer 3.5P; straight fluted carbide hand tap.Starting from∗ ： 177.64 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Spiral Tap for Through Holes for High Speed F-SL
YAMAWA MFG
Capable of 20/MIN ~ 30/MIN high-speed processing. Use of Medium or Low Speeds at 15M/MIN or Less Will Cause a Poor Shape and Poor Emission of Chips, Causing Trouble to Occur- Volume Discount
Starting from∗ ： 29.58 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap for High Speed F-SP
YAMAWA MFG
Capable of 20/MIN ~ 30/MIN high-speed processing. Use of medium or low speeds at 15M/MIN or less will cause a poor shape and poor emission of chips, causing trouble to occur.- Volume Discount
Starting from∗ ： 29.58 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Spiral Tap For High Carbon Steel HC+SP / HC-SP
YAMAWA MFG
It is suitable for tapping high carbon steel such as S55C.- Volume Discount
Starting from∗ ： 10.27 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap For High Carbon Steel, Oxidation Treatment HC+SP-OX / HC-SP-OX
YAMAWA MFG
Suitable for tapping high carbon steel like S55C etc. Has undergone oxidation treatment.- Volume Discount
Starting from∗ ： 11.36 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Carbide MC - Helical Cutter MC-CSLC
YAMAWA MFG
A screw processing tool that utilizes the "helical feed" function. Female threading of different diameters can be done with a single tool, provided the pitch is the same, and either right- or left-handed female screws can be machined.Starting from∗ ： 295.34 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Starting from∗ ： 105.47 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Ultra-High Speed Carbide Tap for Cast Iron for Blind Holes HFICT-B
YAMAWA MFG
Uses a carbide tap with a center through hole shape that supports low temperature cool dry machining, and internally lubricating and mist systems through ultra high speed carbide tapping. It is suitable for blind hole of cast iron.Starting from∗ ： 152.35 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Ultra-High Speed Carbide Tap for Cast Iron for Through Holes HFICT-P
YAMAWA MFG
Uses a carbide tap with a side through hole shape that supports low temperature cool dry machining, and internally lubricating and mist systems through ultra high speed carbide tapping. It is suitable for through holes of cast iron.Starting from∗ ： 152.35 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Spiral Tap for Aluminum AL-SP 1.5P
YAMAWA MFG
[Features]
· Eliminates scrap bite-in or blockages when cutting aluminum die casting or cast aluminum, as a tap for female thread cutting without tearing.- Volume Discount
Starting from∗ ： 12.67 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap For Aluminum (For Insert Coil) AL-PO
YAMAWA MFG
[Features]
· A part for use with comparatively soft materials such as aluminum. For female thread machining so that insert coils can be inserted with the purpose of reinforcing female threads and increasing durability.
· Especially for through holes.- Volume Discount
Starting from∗ ： 26.21 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Specifications |
| Screw Types |
| Screw size (Nominal) |
| Pitch (P), Number of Threading(mm) |
| Chamfer threads (Lcf) |
| Tool Material Type |
| work material |
| Tap Type |
| Hole type |
| Coating Y/N |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG |
| Product Series | HF Spiral Tap for Through Holes Used in Series Dry Machining of Carbon / Alloy Steel HDISL | HF Series Ultra-High Speed Spiral Tap for Cast Aluminum / Die Cast Aluminum HFAHS | HF Series Ultra-High Speed Spiral Tap for Cast Aluminum / Die Cast Aluminum HFASP | H Series Dry Machining Spiral Tap for Cast Aluminum / Die Cast Aluminum HDASP | For Tapered Screw for Pipe (Short Screw Type Spiral) SP-S-PT | For Tapered Screw for Pipe (Short Screw Type for Use with Cast Iron Hard) CT-S-PT | For Tapered Screw for Pipe (Long Screw Type Long Shank) LS-PT | For Tapered Screw for Pipe (Long Screw Type for Use with Cast Iron Hard) CT-PT | Spiral Tap For High Carbon Steel, Oxidation Treatment HC+SP-OX / HC-SP-OX | Ultra-High Speed Carbide Tap for Cast Iron for Blind Holes HFICT-B | Ultra-High Speed Carbide Tap for Cast Iron for Through Holes HFICT-P | ||||||||||||||||||||||||||
| Starting from∗ | 6.44 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 8.94 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 11.86 € *Unit price with basic configuration Volume Discount | 21.36 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 17.48 € *Unit price with basic configuration Volume Discount | 10.30 € *Unit price with basic configuration Volume Discount | 15.26 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 21.41 € *Unit price with basic configuration Volume Discount | 106.83 € *Unit price with basic configuration | 36.15 € *Unit price with basic configuration Volume Discount | 36.15 € *Unit price with basic configuration Volume Discount | 36.15 € *Unit price with basic configuration Volume Discount | 36.15 € *Unit price with basic configuration Volume Discount | 253.22 € *Unit price with basic configuration | 25.02 € *Unit price with basic configuration Volume Discount | 21.06 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 21.37 € *Unit price with basic configuration Volume Discount | 21.66 € *Unit price with basic configuration Volume Discount | 19.63 € *Unit price with basic configuration Volume Discount | 37.13 € *Unit price with basic configuration Volume Discount | 37.13 € *Unit price with basic configuration Volume Discount | 26.01 € *Unit price with basic configuration Volume Discount | 224.47 € *Unit price with basic configuration | 45.98 € *Unit price with basic configuration Volume Discount | 206.91 € *Unit price with basic configuration | 177.64 € *Unit price with basic configuration | 177.64 € *Unit price with basic configuration | 29.58 € *Unit price with basic configuration Volume Discount | 29.58 € *Unit price with basic configuration Volume Discount | 10.27 € *Unit price with basic configuration Volume Discount | 11.36 € *Unit price with basic configuration Volume Discount | 295.34 € *Unit price with basic configuration | 105.47 € *Unit price with basic configuration | 152.35 € *Unit price with basic configuration | 152.35 € *Unit price with basic configuration | 12.67 € *Unit price with basic configuration Volume Discount | 26.21 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | Same day | Same day | 6 Days | Same day | 8 Days | 6 Days | Same day | 8 Days | 6 Days | 8 Days | 7 Days | 8 Days | 8 Days | 8 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 8 Days | 8 Days | 6 Days | 8 Days | 8 Days | 8 Days | 6 Days | 7 Days | 6 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 6 Days | 7 Days |
| Specifications |
| ||||||||||||||||||||||||||||||||||||
| Screw Types | Meter / Unified / Sewing Machine | Meter | Meter | Meter | Meter | Meter | Meter / Unified | Taper for Pipe | Meter / Unified | Meter | Meter | Meter | Meter | Meter / Taper for Pipe / Parallel for Pipes | Meter | Meter | Meter | Meter | Meter / Unified / Whitworth | Meter | Meter | Taper for Pipe | Taper for Pipe | Taper for Pipe | Taper for Pipe | Parallel for Pipes | Parallel for Pipes | Meter | Meter | Meter / Whitworth | Meter | Meter / Taper for Pipe / Parallel for Pipes | Meter | Meter | Meter | Meter | Meter |
| Screw size (Nominal) | No.0-80UNF ～ M48 | M3 ～ M12 | M2 ～ M16 | M2.5 ～ M8 | M2.2 | M3 ～ M6 | No.10-32UNF ～ M24 | 1′-11 ～ 3/8-19 | No.10-32UNF ～ M24 | M6 ～ M20 | M6 ～ M20 | M6 ～ M20 | M6 ～ M20 | 1015 ～ 32506N300M | M3 ～ M12 | M3 ～ M6 | M3 ～ M20 | M2 ～ M12 | 1'-8UNC ～ M36 | M3 ～ M12 | M3 ～ M12 | 1´-11 ～ 3/8-19 | 1/2-14 ～ 3/8-19 | 1′-11 ～ 3/8-19 | PT 1 ～ 3/8-19 | PF 1 ～ 3/8-19 | 1´-11 ～ 3/8-19 | M3 ～ M12 | M3 ～ M12 | 1/2W12 ～ M30 | M3 ～ M16 | 06510X28R ～ 200505N300M | M3 ～ M12 | M6 ～ M12 | M6 ～ M12 | - | STI M3 ～ STI M12 |
| Pitch (P), Number of Threading(mm) | 0.2 ～ 7 | 0.5 ～ 1.25 | 0.4 ～ 2 | 0.35 ～ 0.75 | 0.45 | 0.5 ～ 1 | 0.3 ～ 2 | - | 0.3 ～ 3 | 1 ～ 1.75 | 1 ～ 1.75 | 1 ～ 1.75 | 1 ～ 1.75 | - | 0.5 ～ 1.75 | 0.5 ～ 1 | 0.5 ～ 2.5 | 0.4 ～ 1.75 | 1 ～ 4 | 0.5 ～ 1.75 | 0.5 ～ 1.75 | - | - | 19 ～ 28 | 11 ～ 28 | 11 ～ 28 | 19 | 0.5 ～ 1.75 | 0.5 ～ 1.75 | 0.5 ～ 3 | 0.5 ～ 2 | 0.5 ～ 3 | 0.5 ～ 1.75 | 1 ～ 1.75 | 1 ～ 1.75 | - | 0.5 ～ 1.75 |
| Chamfer threads (Lcf) | 1.5P ～ 5P | 2.5P | 2.5P | 5P | 2.5P | 5P | 5P | 2.5P | 1.5P ～ 3P | 5P | 2.5P | 2.5P | 2.5P | - | 5P | 5P | 5P | 2.5P | 2.5P | 2.5P | 5P | 2.5P | 2.5P | 2.5P | 2.5P | 3.5P | 3.5P | 5P | 2.5P | 2.5P | 2.5P | - | 5P | 2.5P | 4P | 1.5P | 5P |
| Tool Material Type | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Carbide | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | High-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Carbide | High-speed steel | Carbide | Carbide | Carbide | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Carbide | Carbide | Carbide | Carbide | High-speed steel | High-speed steel |
| work material | Brass cast iron (BsC)[○] | Brass cast iron (BsC)[○] | Brass cast iron (BsC)[○/◎] | Brass cast iron (BsC)[○] | Brass cast iron (BsC)[○] | Brass cast iron (BsC)[○] | Brass cast iron (BsC)[○] | Brass cast iron (BsC)[○] | Brass cast iron (BsC)[○] | Brass cast iron (BsC)[○] | Brass cast iron (BsC)[○] | Brass cast iron (BsC)[○] | Brass cast iron (BsC)[○] | Brass cast iron (BsC)[○] | Brass cast iron (BsC)[○] | Brass cast iron (BsC)[○] | Brass cast iron (BsC)[○] | Brass cast iron (BsC)[○] | Brass cast iron (BsC)[○] | Brass cast iron (BsC)[○] | Brass cast iron (BsC)[○] | Brass cast iron (BsC)[○] | Brass cast iron (BsC)[○] | Brass cast iron (BsC)[○] | Brass cast iron (BsC)[○/◎] | Brass cast iron (BsC)[○/◎] | Brass cast iron (BsC)[○/◎] | Brass cast iron (BsC)[○] | Brass cast iron (BsC)[○] | Brass cast iron (BsC)[○] | Brass cast iron (BsC)[○] | Brass cast iron (BsC)[○] | Brass cast iron (BsC)[○] | Brass cast iron (BsC)[○] | Brass cast iron (BsC)[○] | Brass cast iron (BsC)[◎] | Brass cast iron (BsC)[○] |
| Tap Type | Hand Tap | Spiral Tap | Spiral Tap | Hand Tap | Spiral Tap | Point tap | Point tap | Tap for pipes | Hand Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Thread cutter | Point tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Point tap | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Tap for pipes | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Thread cutter | Point tap | Point tap | Point tap | Spiral Tap | Point tap |
| Hole type | For through hole / For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | For through hole | For through hole | For through hole | For blind hole | For blind hole | For blind hole | For through hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole | For blind hole | For through hole | For blind hole | For through hole |
| Coating Y/N | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | Available | Available | Available | Available | Available | Available | Available | N/A | Available | N/A | N/A | Available | N/A | N/A | N/A | N/A | N/A | N/A | Available | Available | N/A | N/A | Available | N/A | Available | Available | Available | N/A |
| Coating Type | - | - | - | - | - | - | - | - | - | TiCN | TiCN | TiCN | TiCN | TiN | TiN | TiN | - | TiN | - | - | TiN | - | - | - | - | - | - | TiN | TiN | - | - | TiAlN | - | TiAlN | TiAlN | Nitriding Treatment | - |
| Overall Length (L)(mm) | 36 ～ 185 | 46 ～ 82 | 42 ～ 95 | 46 ～ 70 | 42 | 46 ～ 62 | 36 ～ 120 | 55 ～ 155 | 34 ～ 120 | 62 ～ 105 | 62 ～ 105 | 62 ～ 105 | 62 ～ 105 | 70 ～ 200 | 46 ～ 82 | 46 ～ 62 | 46 ～ 105 | 42 ～ 82 | 100 ～ 300 | 100 ～ 150 | 100 ～ 150 | 55 ～ 120 | 55 ～ 80 | 100 ～ 200 | 55 ～ 95 | 55 ～ 95 | 55 ～ 95 | 46 ～ 82 | 46 ～ 82 | 46 ～ 135 | 46 ～ 95 | 50 ～ 140 | 46 ～ 82 | 62 ～ 82 | 62 ～ 82 | - | 52 ～ 95 |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No0UN
- NO.0-80UNF
- No.0-80UNF
- No.10
- S0.1
- NO.1-72UNF
- No.1-72UNF
- NO.1-64UNC
- No.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12-32UNEF
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- No.4
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- No.6
- S0.6
- NO.6-40UNF
- No.6-40UNF
- No.6-32UNC
- S0.7
- No.8
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- S0.9
- 1"
- 1UN
- 1UNS
- G1
- G 1"
- M1
- NPS1
- NPT1
- NPTF1
- No1UN
- PF1
- PF 1
- PT 1
- R1
- Rp1
- S1
- UNC 1
- UNC 1"
- UNF 1"
- W1
- 1´-20UNEF
- 1´-14UNS
- 1'-12UNF
- 1´-12UNF
- 1´-11
- 1′-11
- 1-8UNC
- 1'-8UNC
- 1´-8UNC
- G1"-3"
- 1"1/2UN
- 1"1/2
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1´1/2-11
- 1′1/2-11
- 1 1/2-8UN
- 1"1/4UN
- 1"1/4
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1´1/4-11
- 1′1/4-11
- 1 1/4-8UN
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1 1/8-8UN
- 1´ 1/8-7UNC
- 1"1/16UN
- 1/2
- 1/2UN
- G1/2
- G 1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF 1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC 1/2
- UNF 1/2
- UNJF 1/2
- W1/2
- 1/2-28UNEF
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- G1/2 5/8
- 1/2W12
- 1 3/4
- 1"3/4UN
- G1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1′3/4-11
- 1 3/4-8UN
- 1 3/8
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- G1/4
- G 1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PS 1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC 1/4
- UNF 1/4
- UNJF 1/4
- W1/4
- 1/4-32UNEF
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4W20
- W1"5/8
- 1 5/8-8UN
- W1"7/8
- 1 7/8-8UN
- 1'W8
- 1/8
- G1/8
- G 1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8SM40
- 1/8SM44
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- 1/16-28
- 1/16SM80
- M1.1
- G 1.1/2
- G 1.1/4
- G 1.1/8
- M1.2
- S1.2
- M1.4
- S1.4
- M1.6
- M1.7
- M1.8
- 2"
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- No2UN
- R2
- Rp2
- UNC 2
- UNF 2
- W2
- 2´-11
- 2′-11
- 2-8UN
- G2"1/2
- R2"1/2
- Rp2"1/2
- 2′1/2-11
- W2"1/4
- M2.2
- M2.3
- M2.5
- M2.6
- 3M
- EGM 3
- G3
- M3
- M3.0
- No3UN
- R3
- Rp3
- STI M3
- UNC 3
- UNF 3
- 3′-11
- G3"1/2
- R3"1/2
- Rp3"1/2
- 3/4
- 3/4UN
- G3/4
- G 3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF 3/4
- R3/4
- Rp3/4
- UNC 3/4
- UNF 3/4
- W3/4
- 3/4-20UNEF
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- 3/8
- 3/8UN
- G3/8
- G 3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC 3/8
- UNF 3/8
- UNJF 3/8
- W3/8
- 3/8-32UNEF
- 3/8-24UNF
- 3/8-19
- 3/8-16UNC
- 3/8W16
- M3 - M10
- M3～10
- M3 - M12
- SM3/16
- W3/16
- 3/16SM24
- 3/16W24
- 3/16SM28
- 3/16SM32
- 3/16SM40
- M3 - M18
- SM3/32
- 3/32SM56
- 3/32SM100
- 3.5
- M3.5
- 4
- 4M
- EGM 4
- G4
- M4
- M4.0
- MF4
- No4UN
- R4
- Rp4
- STI M4
- UNC 4
- UNF 4
- №4-40UNC
- M4～6
- M4.5
- 5M
- EGM 5
- M5
- M5.0
- MF5
- No5UN
- STI M5
- UNC 5
- №5-40UNC
- 5/8
- 5/8UN
- G5/8
- G 5/8
- NPS5/8
- R5/8
- UNC 5/8
- UNF 5/8
- W5/8
- 5/8-24UNEF
- 5/8-18UNF
- 5/8-11UNC
- G5/8 3/4
- 5/8W11
- M5 - M12
- M5～13
- 5/16
- 5/16UN
- UNC 5/16
- UNF 5/16
- UNJF 5/16
- W5/16
- 5/16-32UNEF
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- W5/32
- 5/64SM64
- 5.5M
- M5.5
- 6
- EGM 6
- M6
- M6.0
- MF6
- No6UN
- STI M6
- UNC 6
- UNF 6
- UNJC 6
- No6-40UNF
- №6-32UNC
- M7
- MF7
- PG7
- 7 execution M3 - M12
- 7/8
- 7/8UN
- G7/8
- G 7/8
- NPS7/8
- R7/8
- UNC 7/8
- UNF 7/8
- W7/8
- 7/8-20UNEF
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- UNC 7/16
- UNF 7/16
- UNJF 7/16
- W7/16
- 7/16-28UNEF
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- SM7/32
- 7.5
- M7.5
- EGM 8
- M8
- MF8
- No8UN
- STI M8
- Tr8
- UNC 8
- UNF 8
- UNJC 8
- №8-32UNC
- 9
- M9
- PG9
- 9/16
- 9/16UN
- UNC 9/16
- UNF 9/16
- 9/16-18UNF
- 9/16-12UNC
- 9/16W12
- SM9/32
- SM9/64
- 9/64SM40
- M9.5
- EGM 10
- M10
- MF10
- No10UN
- STI M10
- Tr10
- Tr 10
- UNC10
- UNC 10
- UNF 10
- UNJF 10
- №10-32UNF
- №10-24UNC
- M10～25
- M11
- PG11
- SM11/32
- SM11/64
- 11/64SM40
- EGM 12
- M12
- MF12
- Mf12
- No12UN
- STI M12
- Tr12
- Tr 12
- UNC 12
- UNF 12
- M12 x 1.5
- M13
- PG13.5
- M14
- MF14
- Tr 14
- M15
- SM15/64
- 15/64SM28
- M16
- MF16
- Mf16
- PG16
- Tr16
- Tr 16
- M16 x 1.5
- M17
- M18
- MF18
- Tr18
- Tr 18
- M19
- M20
- MF20
- Mf20
- Tr 20
- M20 x 1.5
- M21
- PG21
- M22
- M22X
- MF22
- Tr 22
- M23
- M24
- M24X
- MF24
- Tr 24
- M25
- M25X
- MF25
- Mf25
- Tr 25
- M25 x 1.5
- M26
- MF26
- Tr 26
- M27
- MF27
- M28
- MF28
- Tr 28
- PG29
- M30
- MF30
- Tr 30
- M32
- Mf32
- M33
- M34
- M35
- M36
- PG36
- M37
- M38
- M39
- M40
- M42
- PG42
- M44
- M45
- M46
- M48
- M50
- M52
- M56
- M64
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Pitch (P), Number of Threading(mm)
-
Chamfer threads (Lcf)
-
Tool Material Type
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Tap Type
-
Hole type
-
Coating Y/N
-
Coating Type
-
Overall Length (L)(mm)
Narrow search by specifying Brand
-
- MISUMI (15)
- OSG (64)
- YAMAWA MFG (37)
- SKC (23)
- CARMEX (2)
- NS TOOL (1)
- RUKO (1)
- TANOI MFG (1)
- WALTER PROTOTYP (1)
- NACHI(FUJIKOSHI) (0)
- BERNSTEIN AG (0)
- KANETEC (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- STAHLWILLE (0)
- H & H (0)
- BAHCO (0)
- ENGINEER (0)
- LIGHTSEIKI (0)
- HAZET (0)
- TRUSCO NAKAYAMA (0)
- SANDVIK (0)
- WERA (0)
- WIHA (0)
- FEIN (0)
- EIKOSHA (0)
- ISHIHASHI (0)
- RENNSTEIG (0)
- GEDORE (0)
- ESCO (0)
- GUHRING (0)
- REX TOOLS (0)
- NOGAJAPAN (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Screw-Hole-Related Tools
Metoda płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.