TOTAKU INDUSTRIES Resin Hoses（Applicable Fluid / Usage：Water）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
TAC SD-A
TOTAKU INDUSTRIES
[Features]
· Extremely flexible due to its corrugated outer surface (with smooth internal surface).
· Full transparency allows for easy checking of the internal fluids.
· This product has shared suction and delivery and is especially optimal for suction use.
· For use in industrial water supply and drain hoses on construction sites, irrigation, and industry.Min. Shipping Days ： 11 Days -
Min. Shipping Days ： 10 Days -
Min. Shipping Days ： 11 Days -
TAC SD-A2
TOTAKU INDUSTRIES
TAC SD-A lightweight type. A hose with improved flexibility.
[Features]
· A TACSD-A lightweight type.
· Flexibility is improved due to the TACSD-AMin. Shipping Days ： 11 Days -
TAC Helang New Heat-Resistant
TOTAKU INDUSTRIES
[Features]
∙ Heat resistant specifications to resist 100℃ hot air (straight pipes that are designed to withstand 120℃ hot air).
∙ In addition to the conductive rubber, we use steel wire for grounding, which considerably improves safety.
∙ Compared to TAC helang, ozone degradation is less likely to happen to this hose.
∙ Product has superior weather resistance propertiesMin. Shipping Days ： 11 Days -
Line Power AT
TOTAKU INDUSTRIES
Excellent pressure resistance, with a pressure tolerance of 1.00 MPA. The structure does not stretch when compressed. Uses abrasion-resistant rubber for the inner layer, offering excellent abrasion resistance. Stands up to external pressure and deforms little.Min. Shipping Days ： 11 Days -
Line Ace
TOTAKU INDUSTRIES
SD hose pressure-resistant type. This has a reinforcing cord, and has a maximum allowed pressure of 0.5 MPA.
[Features]
・SD hose pressure-resistant type.
▪ With a reinforced cord, it has a pressure-resistant function with a maximum allowable pressure of 0.50 Mpa {5.1 kgf/f}.Min. Shipping Days ： 11 Days -
TAC SD-C
TOTAKU INDUSTRIES
[Features]
· Inner and outer surfaces are smooth.
· Has better pressure resistance than the TAC SD-A.
· Because the soft portion is transparent, it is possible to check the contents that are being transported.Min. Shipping Days ： 11 Days -
TAC SD-C3
TOTAKU INDUSTRIES
TAC SD-C lightweight type.
[Features]
· Lightweight version of the TAC SD-C.
· Suitable for both suction and delivery-4, but the product is particularly well-suited for delivery.
· For supplying or draining water for agriculture, industry, and civil engineering constructionMin. Shipping Days ： 11 Days -
Tac Heran
TOTAKU INDUSTRIES
Uses abrasion resistant rubber for three times the abrasion resistance of TAC SD-A. Conductive for anti-static effects.Min. Shipping Days ： 11 Days
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Applicable Fluid / Usage |
| Cutting Service Usage |
| Nominal I.D. d |
| O.D. D(mm) |
| Properties |
| Hose Material |
| Mounting Metal Fittings |
| Color |
|
|
|
|
|
|
|
|
|
| |
| Brand | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES |
| Product Series | ||||||||||
| Starting from∗ | - | - | - | - | - | - | - | - | - | - |
| Min. Shipping Days ： | 11 Days | 10 Days | 11 Days | 11 Days | 11 Days | 11 Days | 11 Days | 11 Days | 11 Days | 11 Days |
| Applicable Fluid / Usage | Water | Water | Water | Water | Water | Water | Water | Water | Water | Water |
| Cutting Service Usage | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Nominal I.D. d | 13 ～ 200 | 38 ～ 100 | 25 ～ 75 | 25 ～ 125 | 38 ～ 125 | 50 ～ 100 | 25 ～ 300 | 19 ～ 100 | 32 ～ 100 | 38 ～ 150 |
| O.D. D(mm) | 18 ～ 233.5 | 47.5 ～ 120 | 36.7 ～ 95.5 | 30.8 ～ 141.6 | 47.8 ～ 146.8 | 69.5 ～ 129 | 34.9 ～ 347 | 24.2 ～ 115.8 | 37.6 ～ 113 | 47 ～ 172 |
| Properties | Transparency / Flexibility / Vacuum | Antistatic Performance / Abrasion Resistance / Transparency / Flexibility | Pressure Resistance / Transparency / Flexibility | Transparency / Flexibility / Vacuum | Abrasion Resistance / Weather Resistance / Heat Resistance / Vacuum | Abrasion Resistance / Pressure Resistance / Shape Retention | Pressure Resistance / Vacuum | Pressure Resistance / Transparency / Vacuum | Pressure Resistance / Transparency / Vacuum | Antistatic Performance / Abrasion Resistance / Vacuum |
| Hose Material | Others | Elastomer | Elastomer | Others | Ethylene Propylene Rubber | Others | Others | Others | Others | Others |
| Mounting Metal Fittings | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Color | Transparent (including non-white colors) | Transparent (including non-white colors) | Transparent (including non-white colors) | Transparent (including non-white colors) | Black | Orange | Orange | Gray | White | Black |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Applicable Fluid / Usage
- Water
- Chemical
- Powder
- Air
- Special factory requirements
- Oil (Mineral Oil)
- Ink, Paint
- Solvent
- Cement
- Grains
- Steam
- Oxygen
- Acethylene
- Carbon Dioxide
- Argon
- Nitrogen
- Gas
- Agrichemical
-
Cutting Service Usage
- Yes
- No
-
Nominal I.D. d
-
O.D. D(mm)
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 10.5
- 10.6
- 11
- 11.7
- 11.7/11.7
- 12
- 12.3
- 12.5
- 13
- 13.5
- 14
- 14.3
- 14.5
- 14.5/16.0
- 15
- 16
- 16.5
- 17
- 18
- 19
- 19.5
- 20
- 20.1
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 24
- 24.1
- 24.2
- 24.4
- 24.5
- 24.7
- 25
- 25.6
- 26
- 27
- 27.5
- 28
- 28.2
- 28.5
- 29
- 29.9
- 30
- 30.4
- 30.8
- 30.9
- 31
- 31.2
- 31.5
- 31.6
- 31.8
- 32
- 32.6
- 32.9
- 33
- 33.4
- 33.5
- 33.7
- 33.8
- 34
- 34.2
- 34.4
- 34.5
- 34.9
- 35.5
- 35.6
- 36
- 36.5
- 36.7
- 37
- 37.4
- 37.6
- 38
- 38.2
- 39
- 39.2
- 39.3
- 39.8
- 40
- 40.2
- 40.5
- 40.8
- 41
- 41.5
- 41.6
- 41.8
- 42
- 42.5
- 43
- 43.2
- 43.5
- 43.8
- 43.9
- 44
- 44.4
- 44.6
- 45.5
- 45.8
- 46
- 46.2
- 46.4
- 46.5
- 46.6
- 47.0
- 47.2
- 47.5
- 47.6
- 47.8
- 48
- 48.4
- 48.5
- 48.7
- 48.8
- 49.5
- 50
- 50.1
- 50.5
- 50.7
- 51
- 52
- 52.3
- 53
- 55
- 56
- 57.0
- 57.5
- 58
- 58.2
- 58.5
- 58.6
- 59.5
- 59.7
- 59.8
- 60
- 60.2
- 60.5
- 60.9
- 61
- 61.4
- 61.6
- 62
- 62.6
- 62.8
- 63
- 63.4
- 63.5
- 64.5
- 65
- 65.2
- 66.0
- 66.8
- 68
- 69.3
- 69.5
- 69.7
- 70
- 71.0
- 71.5
- 72
- 72.1
- 72.2
- 72.4
- 72.6
- 73
- 73.6
- 73.9
- 74
- 74.1
- 74.6
- 74.8
- 75
- 75.1
- 76.0
- 76.5
- 76.8
- 77
- 78
- 78.5
- 78.9
- 80
- 80.5
- 81.5
- 84
- 84.8
- 85.1
- 86
- 86.3
- 86.6
- 87.0
- 87.5
- 87.6
- 88.0
- 88.8
- 89
- 89.1
- 89.6
- 89.8
- 90
- 90.2
- 90.8
- 91
- 91.4
- 92
- 93.3
- 95.5
- 99.1
- 99.5
- 99.7
- 100.5
- 101
- 102.0
- 102.8
- 104
- 104.2
- 104.3
- 105.2
- 106.0
- 107
- 108
- 111.6
- 112.0
- 112.3
- 112.6
- 113
- 114
- 115
- 115.2
- 115.8
- 117
- 117.2
- 117.6
- 118
- 118.4
- 118.6
- 119
- 119.5
- 120
- 120.5
- 128
- 129
- 131.8
- 137.9
- 139.5
- 140
- 140.6
- 141.6
- 143
- 143.6
- 144.8
- 146.8
- 148
- 151
- 152
- 152.2
- 152.5
- 159.5
- 167.5
- 168.0
- 169.4
- 169.8
- 171.0
- 172.0
- 173
- 173.6
- 174.7
- 180
- 180.5
- 183.5
- 184.5
- 197.8
- 221.5
- 223.4
- 223.8
- 226.4
- 226.5
- 229.7
- 230
- 233.5
- 235
- 237
- 238.0
- 245
- 274
- 286.0
- 295.0
- 328.5
- 347.0
-
Properties
- Standard
- Antistatic Performance
- Abrasion Resistance
- Weather Resistance
- Pressure Resistance
- Heat Resistance
- Low Temp. Resistance
- Oil Resistance
- Chemical Resistance
- Low Release
- Non-adhesive
- Transparency
- Flexibility
- Low Odor
- Condensation Prevention
- Shape Retention
- High Strength
- Vacuum
- Bending Property
- Other Properties
-
Hose Material
- Polyurethane
- Vinyl Chloride
- Silicon Rubber
- Fluororesin
- Olefinic Resin
- Polyolefinic Resin + Styrene Resin
- Others
- Elastomer
- Ethylene Propylene Rubber
- Nylon
-
Mounting Metal Fittings
-
Color
- White
- Milky White
- Transparent (including non-white colors)
- Red
- Blue
- Green
- Rose
- Black
- Gray
- Ivory
- Orange
- Yellowish Opaque White
- Pink
- Brown
- 2-Color
- Yellow
Narrow search by specifying Brand
-
- MISUMI (7)
- TOYOX (19)
- TOTAKU INDUSTRIES (10)
- KURARAYPLASTICS (9)
- TOGAWA INDUSTRY (9)
- PLAS-TECH (6)
- KANAFLEX CORPORATION (5)
- TIGERS POLYMER (5)
- SHINSUNG (3)
- HAKKO (2)
- TRUSCO NAKAYAMA (2)
- CHIYODA TSUSHO (1)
- SANYO KASEI (1)
- ESCO (0)
- PREVOST (0)
- NORELEM (0)
- TRU COMPONENTS (0)
- HELLERMANN TYTON (0)
- DSG CANUSA (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Examples how you can use these components Test
Categories related to Resin Hoses
Metoda płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.