TIGERS POLYMER Conduit（Applicable Fluid：Air）
?* Information on days to ship and prices
-
Tie Duct Hose Anti-wear GL Type
TIGERS POLYMER
A tie duct hose GL type hose with superior wear resistance that can be used at a wide range of temperatures from -30°C to 80°C. Also has an anti-static effect.
[Features]
· Has superior wear resistance and can be used in a wide variety of temperatures (approximately -30°C to 80°C).
Has superior conductivity and a static band prevention effect.
· Has superior weather resistance.
· Suited to the transport of powders and granular material, dust collection, and feeding high temperature exhaust.Min. Shipping Days ： 10 Days -
Tie Flexible Hose, P-2 Type
TIGERS POLYMER
Flexible, lightweight, and freely bendable. Shrinks to a third or fourth of its size, improving transport efficiency and saving storage space.Starting from∗ ： 76.41 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Tie Flexible Hose V Model FP Type
TIGERS POLYMER
The hose is flexible and the material used for the product is a flameproof Grade 1 material as stipulated in JIS A 1322.
[Features]
· Made of special coating glass cloth and stainless steel plate (SUS304).
· Easy to stow, store and transport because it can be extended or retracted as and when required.
· The allowable continuous operating temperature is 250°C or less.
· Can be used at higher temperatures than PAL, AG types.
· The material used, which is a specially coated glass cloth, is a flameproof Grade 1 materials as per JISA1322.- Volume Discount
Starting from∗ ： 237.29 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Duct Hose GL Type
TIGERS POLYMER
Features a smooth inner surface and little ventilation loss. Exhaust feed hose for woodworking machinery, dusters, and general dust collectors.
[Features]
· Lightweight and portable.
· Highly flexible.
· Features superior chemical resistance against acids, alkali materials, etc.
· High transport capacity is achieved due to low airflow resistanceMin. Shipping Days ： 9 Days -
Duct Hose N Type
TIGERS POLYMER
Metal wire is used for reinforcement, and since thermal deformation is reduced, the hose has good flexibility.
[Features]
· Lightweight and portable.
・It has high flexibility.
· It has superior chemical resistance properties for acids and alkaline etc.
・Metal wires in the core wires reduce heat deformationMin. Shipping Days ： 10 Days -
Tie Flexible Hose, P Type
TIGERS POLYMER
Flexible, lightweight, and freely bendable. Shrinks to a third or fourth of its size, improving transport efficiency and saving storage space.Starting from∗ ： 76.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tie Flex Hose Flame Retardant P Type
TIGERS POLYMER
Because this product has flame retardant qualities equivalent to UL-HB as well as the same structure as the P type, it provides superior elasticity.
[Features]
· Produced by adding flame retardance to the Tie Flex Hose P Type.
· Flame retardance is UL94-HB-equivalent.
· Features superior elasticity due to shared structure with the P type (shrinkage ratio 1/3 to 1/4).
· Lightweight and freely bendable.
· Accordingly, piping construction is also made easy, which improves construction workability and saves labor.
· A dedicated flame retardant end is also providedStarting from∗ ： 120.17 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Tiflex Hose, AP Type
TIGERS POLYMER
Flexible and lightweight hose with an allowable continuous service temperature of 100℃ and below. Airtight.
[Features]
･ Heat-resistant flexible hose made from olefin resin and aluminum foil from a special laminating process.
･ The special laminated aluminum foil is inserted in an inner-outer surface of an olefin resin for superior airtightness.
· Flexible, lightweight with superior workability.
· The allowable continuous service temperature is 100˚C or lessStarting from∗ ： 91.76 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tie Flex Hose V Shaped PAL Type
TIGERS POLYMER
Lightweight and telescopes freely, can be used continuously at a temperature of 130°C or less.
[Features]
Flexible hose for heat resistance configured from special laminated aluminum foil and a zinc-plated steel plate.
Because it is lightweight and telescopes freely, it is easy to stow, store, and transport.
· The allowable continuous operating temperature is 130˚C or less.- Volume Discount
Starting from∗ ： 70.53 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tiflex Hose V Model AG Type
TIGERS POLYMER
Lightweight and with excellent flame and heat resistance. The material used for the product is a flameproof grade 1 material as stipulated in JIS A 1322. The continuous operating temperature is up to 180°C.
[Features]
· Heat resistant flexible hose made of specially laminated aluminum foil, glass cloth, and galvanized steel plate.
· Lightweight and with excellent flame and heat resistance.
· The continuous operating temperature is up to 180˚C.
· The aluminum and the glass cloth sheet are flameproof grade 1 materials as stipulated in JIS A1322.- Volume Discount
Starting from∗ ： 118.25 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tie Flexible Hose, V Type, SUS Type
TIGERS POLYMER
Uses all stainless steel (SUS304). Continuous operating temperature of up to 400℃.- Volume Discount
Starting from∗ ： 116.37 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Silicon Duct Hose SRDH, TS Type/ GS Type
TIGERS POLYMER
This duct hose is airtight and heat resistant (150 - 200 °C). It can be used in temperatures as low as -50°C.Starting from∗ ： 126.35 € Min. Shipping Days ： 14 Days *Unit price with basic configuration
-
Min. Shipping Days ： 10 Days -
TiFlex NH-1 Type
TIGERS POLYMER
Excellent expansion/contraction, bending, and thermal insulation. Non-combustible material certified by the Japan Ministry of Land, Infrastructure, Transport and Tourism.Min. Shipping Days ： 10 Days
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Material |
| Cutting Service Usage |
| Properties |
| I.D. d(mm) |
| O.D. D(mm) |
| Color |
| Applicable Fluid |
| Max. Allowable Pressure (below Ambient Temperature)(MPa) |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER |
| Product Series | ||||||||||||||
| Starting from∗ | - | 76.41 € *Unit price with basic configuration | 237.29 € *Unit price with basic configuration Volume Discount | - | - | 76.41 € *Unit price with basic configuration | 120.17 € *Unit price with basic configuration | 91.76 € *Unit price with basic configuration | 70.53 € *Unit price with basic configuration Volume Discount | 118.25 € *Unit price with basic configuration Volume Discount | 116.37 € *Unit price with basic configuration Volume Discount | 126.35 € *Unit price with basic configuration | - | - |
| Min. Shipping Days ： | 10 Days | 9 Days | 6 Days | 9 Days | 10 Days | 6 Days | 9 Days | 6 Days | 6 Days | 6 Days | 10 Days | 14 Days | 10 Days | 10 Days |
| Material | EPDM | Olefinic Resin | Special Coating Glass | PVC | PVC | Olefinic Resin | Olefinic Resin | Aluminum | Aluminum | Aluminum | Stainless Steel | Others | Elastomer | Polypropylene |
| Cutting Service Usage | Yes | No | No | Yes | Yes | No | No | No | No | No | No | No | Yes | Yes |
| Properties | Abrasion Resistance / Heat Resistance | Standard / Flexibility / Others | Heat Resistance / Others | Standard / Flexibility | Standard / Flexibility | Standard / Flexibility / Others | Standard / Flame Resistance / Others | Heat Resistance / Flexibility | Heat Resistance / Others | Heat Resistance | Heat Resistance | Low Temp. Resistance / Heat Resistance / Flexibility | Flexibility | Flame Resistance / Heat Resistance / Flexibility / Others |
| I.D. d(mm) | 38.1 ～ 208 | 37.5 ～ 127.5 | 50.8 ～ 152 | 25 ～ 303 | 16.7 ～ 204.1 | 37.5 ～ 302 | 37.5 ～ 302 | 38.1 ～ 101.6 | 50.8 ～ 126 | 50.8 ～ 126 | 50.8 ～ 126 | 25 | 32 ～ 203.7 | 105 ～ 408 |
| O.D. D(mm) | 46 ～ 223 | 41.5 ～ 131.5 | 55.3 ～ 157 | 32.4 ～ 316.4 | 21.2 ～ 211.5 | 41.5 ～ 308 | 41.5 ～ 308 | 42.9 ～ 110 | 54.3 ～ 130 | 55.3 ～ 131 | 53.8 ～ 129.5 | 28 | 39.5 ～ 220 | 155 ～ 458 |
| Color | Black | White | Gray | Gray | Gray | Dark Brown | Black | Gray | Gray | White | Gray | Red | White | Gray |
| Applicable Fluid | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air |
| Max. Allowable Pressure (below Ambient Temperature)(MPa) | 0.01 ～ 0.05 | 0.005 ～ 0.018 | 0.008 ～ 0.018 | 0.01 ～ 0.06 | 0.01 ～ 0.06 | 0.002 ～ 0.018 | 0.002 ～ 0.018 | 0.03 ～ 0.06 | 0.018 ～ 0.032 | 0.018 ～ 0.032 | 0.01 ～ 0.018 | - | 0.01 ～ 0.06 | 0.0005 |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Material
- Aluminum
- Special Coating Glass
- Stainless Steel
- Polypropylene
- PVC
- Olefinic Resin
- EPDM
- Elastomer
- Steel
- Others
- Polyurethane
-
Cutting Service Usage
- Yes
- No
-
Properties
- Standard
- Antistatic Performance
- Abrasion Resistance
- Oil Resistance
- Flame Resistance
- Low Temp. Resistance
- Heat Resistance
- Low Particle Generation
- Flexibility
- Others
-
I.D. d(mm)
- 10
- 16.7
- 19.5
- 25
- 25.4
- 25.5
- 31.8
- 32
- 32.4
- 32.5
- 35
- 37.3
- 37.5
- 38
- 38.1
- 38.5±0.5
- 39
- 41
- 42.7
- 50
- 50.5±1.0
- 50.6
- 50.8
- 50.9
- 51
- 52.5
- 53.0
- 53.5
- 62.4
- 63
- 63.5
- 64
- 64.5±1.0
- 65
- 65.5
- 66
- 66.2
- 67
- 67.5
- 68.0
- 70
- 71.0
- 75
- 75.5
- 75.9
- 76
- 76.2
- 76.4
- 76.5
- 78.0
- 79
- 83
- 88.9
- 89
- 89.8
- 90
- 91
- 91.5
- 92
- 97.0
- 98
- 100
- 100.3
- 101.0
- 101.3
- 101.4
- 101.5
- 101.6
- 101.7
- 102
- 102.2
- 102.5
- 103
- 104
- 105
- 109.0
- 113
- 114.3
- 117.0
- 123.0
- 125
- 125.9
- 126
- 126.5
- 127
- 127.3
- 127.5
- 128
- 130
- 131.4
- 145.0
- 150
- 151.4
- 151.7
- 152
- 152.4
- 152.5
- 152.6
- 155
- 165
- 175
- 176.5
- 176.6
- 177.8
- 180
- 200
- 202
- 203.2
- 203.6
- 203.7
- 204.1
- 205
- 208
- 227.0
- 228.6
- 230
- 250
- 252
- 252.1
- 253
- 253.0±2.0
- 253.5
- 254
- 257
- 278
- 282
- 300
- 302
- 303
- 303.5
- 307
- 357
- 359.0
- 400
- 408
- 410.0
- 500
- 512.0
-
O.D. D(mm)
- 21.2
- 24
- 28
- 30
- 31.4
- 32.0
- 32.4
- 37
- 38
- 38.6
- 39.2
- 39.5
- 39.8
- 40.0
- 41.5
- 42.0
- 42.6
- 42.9
- 44.5
- 44.5±1.0
- 45.0
- 45.4
- 45.8
- 45.9
- 46
- 46.2
- 46.8
- 53.8
- 54.3
- 54.5
- 55.0
- 55.3
- 56
- 56.4
- 56.6
- 57.5
- 57.6
- 57.9
- 58.0
- 58.5
- 59.0
- 59.8
- 59.8±1.5
- 59.9
- 60.2
- 61.0
- 61.2
- 61.8
- 69
- 69.5
- 70
- 70.3
- 70.5
- 71
- 71.2
- 71.5
- 71.6
- 71.8
- 72
- 72.6
- 73.0
- 73.2
- 73.2±1.5
- 74.7
- 79
- 79.5
- 80
- 80.3
- 80.5
- 81
- 81.5
- 81.8
- 82
- 82.4
- 82.5
- 83.8
- 84.5
- 84.6
- 85
- 85.2
- 85.8
- 85.9
- 86.4
- 86.8
- 87
- 87.2
- 87.6
- 94
- 94.5
- 95
- 95.5
- 96
- 96.8
- 97.4
- 97.7
- 98.2
- 98.6
- 99.0
- 99.3
- 99.5
- 100
- 100.3
- 101.4
- 105
- 105.3
- 105.5
- 106
- 107
- 107.3
- 107.4
- 108
- 109
- 110
- 110.5
- 110.8
- 111.4
- 111.5
- 112
- 112.2
- 113.0
- 114.6
- 118.0
- 119.3
- 125.3
- 125.9
- 129.5
- 130
- 130.3
- 130.5
- 131
- 131.5
- 132
- 133.7
- 134.5
- 135.0
- 137
- 137.2
- 137.3
- 137.5
- 137.6
- 137.7
- 138
- 138.2
- 138.5
- 138.7
- 139.3
- 139.7
- 140.2
- 155
- 155.5
- 155.7
- 157
- 158
- 159
- 160
- 162
- 163.8
- 164
- 164.8
- 165.5
- 166.0
- 166.2
- 167
- 168.8
- 177.8
- 180
- 180.7
- 182.8
- 187.8
- 190.6
- 191.0
- 192.4
- 205
- 205.7
- 208
- 211.0
- 211.5
- 215
- 216.0
- 216.5
- 216.8
- 217.1
- 217.2
- 217.5
- 220
- 223
- 230
- 240.4
- 243.1
- 255
- 255.9
- 256
- 259.5
- 261.0
- 263.9
- 263.9±2.5
- 265.7
- 266.2
- 268.5
- 271
- 274.2
- 280
- 292.6
- 305.9
- 306.5
- 307
- 308
- 309.6
- 311
- 316.0
- 316.4
- 318
- 320.0
- 322
- 328.2
- 332
- 357
- 378.5
- 407
- 418.0
- 431.0
- 458
- 520.0
- 532.0
-
Color
- Black
- White
- Gray
- Transparent
- Ivory
- Dark Brown
- Red
- Metal Color
-
Applicable Fluid
- Machining Oil
- Lubricant
- Chemical
- Powder
- Grains
- Air
- Paper Scraps
- Sparks
- Oil Mist
-
Max. Allowable Pressure (below Ambient Temperature)(MPa)
Narrow search by specifying Brand
-
- MISUMI (7)
- TOTAKU INDUSTRIES (16)
- TIGERS POLYMER (14)
- KANAFLEX CORPORATION (12)
- KURARAYPLASTICS (4)
- ORIENT CORPORATION (2)
- OHTSUKA (1)
- SHINSUNG (1)
- COSMOTEC (0)
- KURIMOTO (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Conduit
Metody płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.