THK Linear Rail Guides / Profile Rail Guides（Accuracy：Precision Grade）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Miniature profiled rail guides / rail type selectable / carriage dimensions selectable / SRS
THK
A miniature type with a compact structure. Can be mounted in areas in space saving areas, and a part of the LM block has been formed using resin to achieve lightweight.
* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.- 2D / 3D CAD data available
Min. Shipping Days ： 14 Days -
Profile rail guideways / carriage dimensions selectable / material selectable / SHS
THK
A standard type of LM guide with ball retainer. Incurs load from four directions which allows it to be used in any position.
* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.- 2D / 3D CAD data available
Min. Shipping Days ： 14 Days -
Profile rail guideways / carriage dimensions selectable / material selectable / SR
THK
A type with a compact structure that has a low cross-section height and is resilient against loads in the radial direction. More advantageous than HSR when incurring loads in the radial direction (longevity, precision, rigidity, etc.).
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.
· Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
· A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.
· This is a self-aligning type that can easily absorb error in the level precision and the degree of parallelism for the two shafts, which is capable of highly precise and smooth movements.
· The retainer part on each of the ball rows can obtain rolling motions with limited sound because of the balls being designed to smoothly circulate using the guiding part on the end plate.
· It is possible to maintain precision of long periods of time, have excellent abrasion resistance and limited differential slipping even when there is a preload or uneven loads.
· LM block, LM rail, and LM rail are all compatible with stainless steel.- 2D / 3D CAD data available
Min. Shipping Days ： 14 Days -
Miniature profiled rail guides / rail type selectable / carriage dimensions selectable / SRS-G
THK
A full-ball type with not ball retainer on the SRS type.
[Features]
· The LM guide with ball retainer SRS type has a structure that includes two rolling sides on a compact body, which allows the load to be incurred from all sides, and can be used with a single shaft at locations that have limited space requirements and locations that use moment.
· The adoption of the ball retainer has eliminated mutual friction between the balls, which provides excellent high speed, low noise, good sound quality, long life, and being maintenance-free for long periods of time.
· The ball retainer eliminates the mutual friction between the balls, which improves the grease holdability and reduces the raised dust amount.
· The LM block and LM rail both use stainless steel that are highly rust-proof.
· The rail cross-section height is kept low, and it has a compact structure with a single left and right ball row, which allows it be mounted in space saving areas.
· This is a lightweight type where a part (around the ball escape hole, etc.) of the LM block has been insert formed using resin materials.- 2D / 3D CAD data available
Min. Shipping Days ： 19 Days -
Profile rail guideways / carriage dimensions selectable / material selectable / HSR
THK
A standard full-ball type. Incurs load from four directions which allows it to be used in any position. A series with the most abundance in variations in size and shape, etc.
* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.- 2D / 3D CAD data available
Min. Shipping Days ： 14 Days -
Profile rail guideways / wide rail / wide carriage / material selectable / SHW
THK
A structure with a wide rail width and low center of gravity. SHS It is advantageous when there are Mc moment requirements and is thin compared with.
[Features]
· A highly rigid LM guide that is capable of superior high speeds, maintenance-free over long periods of time, and having low noise due to the adoption of a ball retainer.
· The SHW, which has a structure with a width LM rail width and a low center of gravity, is ideal for use in locations where there are space limitations, and when there are MC moment rigidity requirements.
· Each of the rail rows has been arranged in an array at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and can be used for a wide range of application.
· The self-aligning capability achieved from the unique circular arched-groove front face combination (DF set) makes it possible to absorb the mounting error even when there is a preload incurred, and it is also capable of obtaining a smooth linear motion at a high accuracy.
· The ball retainers eliminate the mutual friction between the balls and holds the lubricant oil (agent) to achieve superior low-dust performance.- 2D / 3D CAD data available
Min. Shipping Days ： 14 Days -
Profile rail guideways / wide rail / wide carriage / material selectable / HRW
THK
A structure with a wide rail width and low center of gravity. HSR It is advantageous when there are Mc moment requirements and is thin compared with.
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· Compact heavy load: A high number of effective balls makes it possible to obtain high rigidity in all directions. Has a wide rail width and can adequately withstand moments with a single shaft.
There is a high rigidity in the horizontal direction and there is no need to for reinforcement such as horizontal pressing due to large secondary moments being incurred on the rail cross-section.
· The self-aligning capability achieved from the unique circular arched-groove front face combination (DF set) makes it possible to absorb the mounting error even when there is a preload incurred, and it is also capable of obtaining a smooth linear motion at a high accuracy.- 2D / 3D CAD data available
Min. Shipping Days ： 14 Days -
Profile rail guideways / carriage dimensions selectable / precision / material selectable / SSR
THK
Radial type that is strong against loads in the radial direction. More advantageous than SHS when incurring loads in the radial direction (longevity, precision, rigidity, etc.). A stainless steel type not featured with the SHS is also available.
*When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.- 2D / 3D CAD data available
Min. Shipping Days ： 14 Days -
Ball LM guide, radial type, SR-M1 type
THK
High temperature specifications that can be used in maximum temperatures of 150°C, and the grease can also be used in high temperature environments. Has low rolling resistance fluctuation in response to changes in temperature and a dimension consistency treatment has been applied, which has provided excellent dimensional consistency.- 2D CAD data available
Min. Shipping Days ： 39 Days -
All Ball LM Guide, World Standard, HSR-M1 Type for High Temperature
THK
High temperature specifications that can be used in maximum temperatures of 150°C, and the grease can also be used in high temperature environments. Has low rolling resistance fluctuation in response to changes in temperature and a dimension consistency treatment has been applied, which has provided excellent dimensional consistency.
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used from any position.
· The LM guide for use in high temperatures can be used in even higher temperatures of up to 150°C as a result of using a unique technology for the materials, heat treatment, and lubricant.
· Can now be used in temperatures of up to 150°C by using stainless steel end rails and end rails that utilize rubber materials for use in high temperatures.
· A dimensional consistency treatment has been applied to achieve excellent dimensional consistency after applying heat or cooling (may thermally expand under high temperatures).
· The LM block, LM rail, and balls all use stainless steel with excellent corrosion resistance, which is ideal for use in clean rooms.
· Uses a grease for use in high temperatures with limited rolling resistance fluctuations resulting from grease even when the temperature fluctuates from a normal temperature to a high temperature.- 2D CAD data available
Min. Shipping Days ： 54 Days -
LM guide with Ball retainer - Limited stroke EPF type
THK
A limited stroke type. Smooth movement due to there being no ball circulation. Also has a high rigidity compared with conventional products from a structural standpoint. It is particularly advantageous when there are Mc moment requirements.- 2D / 3D CAD data available
Min. Shipping Days ： 24 Days
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Set / Single Item |
| Block Type |
| Rail Type |
| Rail Width(mm) |
| Mounting Height H(mm) |
| No. of Blocks |
| Material |
| Rail Length L(mm) |
| Preload |
| Accuracy |
| Nominal Part Number |
| Ball Arrangement |
| Retainer |
| Block Mounting Hole Pitch (Width Direction)(mm) |
| Block Mounting Hole Pitch (Length Direction)(mm) |
| Block Mounting Hole Diameter |
| Rail Mounting Hole Pitch(mm) |
| Rail Mounting Hole Diameter |
|
|
|
|
|
|
|
|
|
|
| |
| Brand | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK |
| Product Series | Miniature profiled rail guides / rail type selectable / carriage dimensions selectable / SRS | Profile rail guideways / carriage dimensions selectable / material selectable / SHS | Profile rail guideways / carriage dimensions selectable / material selectable / SR | Miniature profiled rail guides / rail type selectable / carriage dimensions selectable / SRS-G | Profile rail guideways / carriage dimensions selectable / material selectable / HSR | Profile rail guideways / wide rail / wide carriage / material selectable / SHW | Profile rail guideways / wide rail / wide carriage / material selectable / HRW | Profile rail guideways / carriage dimensions selectable / precision / material selectable / SSR | All Ball LM Guide, World Standard, HSR-M1 Type for High Temperature | ||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
| Starting from∗ | - | - | - | - | - | - | - | - | - | - | - |
| Min. Shipping Days ： | 14 Days | 14 Days | 14 Days | 19 Days | 14 Days | 14 Days | 14 Days | 14 Days | 39 Days | 54 Days | 24 Days |
| Set / Single Item | Set | Set | Set | Set | Set | Set | Set | Set | Set | Set | Set |
| Block Type | Standard / Wide / Long | Standard / Wide | Standard / Wide / Wide Short | Standard / Wide | Standard / Wide | Wide | Wide | Standard / Wide | Standard / Wide / Wide Short | Standard / Wide | Standard |
| Rail Type | Standard / Wide | Standard | Standard | Standard / Wide | Standard | Wide | Wide | Standard | Standard | Standard | Standard |
| Rail Width(mm) | 7 ～ 42 | 15 ～ 63 | 15 ～ 70 | 9 ～ 42 | 15 ～ 63 | 18 ～ 90 | 18 ～ 120 | 15 ～ 34 | 15 ～ 34 | 15 ～ 28 | 7 ～ 15 |
| Mounting Height H(mm) | 6.5 ～ 25 | 24 ～ 90 | 24 ～ 85 | 10 ～ 25 | 28 ～ 90 | 12 ～ 50 | 12 ～ 60 | 24 ～ 48 | 24 ～ 48 | 24 ～ 45 | 8 ～ 16 |
| No. of Blocks | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 |
| Material | Stainless Steel | Carbon steel | Carbon steel / Stainless Steel | Stainless Steel | Carbon steel / Stainless Steel | Carbon steel / Stainless Steel | Carbon steel / Stainless Steel | Carbon steel / Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
| Rail Length L(mm) | 30 ～ 2000 | 71 ～ 3000 | 47 ～ 3000 | 32 ～ 2000 | 64 ～ 3000 | 38 ～ 3000 | 38 ～ 3000 | 47 ～ 3000 | 47 ～ 1500 | 67 ～ 1500 | 33 ～ 110 |
| Preload | Standard / Light Preload | Standard / Light Preload / Medium Preload | Standard / Light Preload / Medium Preload | Standard / Light Preload | Standard / Light Preload / Medium Preload | Standard / Light Preload / Medium Preload | Standard / Light Preload / Medium Preload | Standard / Light Preload | Standard / Light Preload / Medium Preload | Standard / Light Preload / Medium Preload | - |
| Accuracy | Precision Grade | Precision Grade | Precision Grade | Precision Grade | Precision Grade | Precision Grade | Precision Grade | Precision Grade | Precision Grade | Precision Grade | Precision Grade |
| Nominal Part Number | 5W ～ 25 | 15 ～ 65 | 15 ～ 70 | 9W ～ 25 | 15 ～ 65 | 12 ～ 50 | 12 ～ 60 | 15 ～ 35 | 15 ～ 35 | 15 ～ 30 | 7 ～ 15 |
| Ball Arrangement | Standard | 4-Row, Circular | 4-Row, Circular | Standard | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular |
| Retainer | Available | Available | N/A | N/A | N/A | Available | N/A | Available | N/A | N/A | Available |
| Block Mounting Hole Pitch (Width Direction)(mm) | 15 ～ 45 | 26 ～ 142 | 26 ～ 90 | 15 ～ 45 | 11.5 ～ 142 | 21 ～ 144 | 21 ～ 180 | 26 ～ 60 | 26 ～ 82 | 11.5 ～ 72 | 12 ～ 25 |
| Block Mounting Hole Pitch (Length Direction)(mm) | 10 ～ 35 | 26 ～ 120 | 26 ～ 90 | 10 ～ 35 | 18 ～ 120 | 12 ～ 80 | 12 ～ 80 | 26 ～ 50 | 26 ～ 50 | 18 ～ 60 | 13 ～ 25 |
| Block Mounting Hole Diameter | 3 ～ 6 | 4 ～ 16 | 4 ～ 16 | 3 ～ 6 | 4 ～ 16 | 2.5 ～ 10 | 3 ～ 10.5 | 4 ～ 8 | 4 ～ 9 | 4 ～ 10 | 2 ～ 3 |
| Rail Mounting Hole Pitch(mm) | 20 ～ 60 | 60 ～ 150 | 60 ～ 150 | 20 ～ 60 | 60 ～ 150 | 40 ～ 80 | 40 ～ 105 | 60 ～ 80 | 60 ～ 80 | 60 ～ 80 | 15 ～ 40 |
| Rail Mounting Hole Diameter | 3 ～ 7 | 4.5 ～ 18 | 3.5 ～ 18 | 3.5 ～ 7 | 4.5 ～ 18 | 4.5 ～ 9 | 4.5 ～ 11 | 4.5 ～ 9 | 3.5 ～ 9 | 4.5 ～ 9 | 2.4 ～ 3.5 |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Set / Single Item
- Set
- Block only
- Rail Only
-
Block Type
-
Standard -
Short -
Wide -
Wide Long -
Long -
Extra Long -
Wide Short
-
-
Rail Type
-
Standard -
Wide
-
-
Rail Width(mm)
-
Mounting Height H(mm)
-
No. of Blocks
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
-
Material
-
Rail Length L(mm)
- 25
- 35
- 40
- 45
- 50
- 55
- 70
- 75
- 80
- 85
- 95
- 100
- 110
- 115
- 120
- 130
- 135
- 140
- 145
- 150
- 155
- 160
- 165
- 170
- 175
- 190
- 195
- 200
- 205
- 215
- 220
- 230
- 235
- 240
- 245
- 250
- 255
- 260
- 265
- 270
- 275
- 280
- 290
- 295
- 310
- 315
- 320
- 335
- 340
- 345
- 350
- 355
- 360
- 370
- 375
- 390
- 395
- 400
- 415
- 420
- 430
- 435
- 440
- 445
- 455
- 460
- 470
- 475
- 495
- 510
- 515
- 520
- 535
- 545
- 550
- 555
- 560
- 570
- 575
- 580
- 590
- 595
- 600
- 615
- 620
- 630
- 635
- 640
- 645
- 670
- 680
- 695
- 700
- 710
- 720
- 745
- 750
- 760
- 770
- 790
- 795
- 800
- 820
- 830
- 840
- 845
- 870
- 880
- 895
- 910
- 920
- 940
- 945
- 950
- 970
- 990
- 1000
- 1040
- 1060
- 1080
- 1120
- 1160
- 1180
- 1200
- 1240
- 1300
- 1320
- 1360
- 1400
- 1420
- 1440
- 1480
- 1520
- 1540
- 1560
- 1600
- 1640
- 1660
- 1720
- 1780
- 1800
- 1840
- 1880
- 1900
- 1960
- 2000
[30-3000/1mm Unit(s)]
-
Preload
- Standard
- Light Preload
- Medium Preload
- Clearance
- Heavy Preload
See the accuracy standard of each manufacturer.
-
Accuracy
- Standard Grade
- High Grade
- Precision Grade
- High Precision Grade
- Ultra Precision Grade
See the accuracy standard of each manufacturer.
-
Nominal Part Number
-
Ball Arrangement
-
Retainer
-
Block Mounting Hole Pitch (Width Direction)(mm)
-
Block Mounting Hole Pitch (Length Direction)(mm)
-
Block Mounting Hole Diameter
-
Rail Mounting Hole Pitch(mm)
-
Rail Mounting Hole Diameter
Narrow search by specifying Brand
-
- MISUMI (6)
- THK (11)
- BOSCH REXROTH (4)
- SBC (1)
- OZAK (0)
- IKO (0)
- INA (0)
- SKF (0)
- GANTER (0)
- NORELEM (0)
- SCHNEEBERGER (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Linear Rail Guides / Profile Rail Guides
Metoda płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.