THK Linear Rail Guides / Profile Rail Guides（Block Type：Standard）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Miniature profiled rail guides / rail type selectable / carriage dimensions selectable / SRS
THK
A miniature type with a compact structure. Can be mounted in areas in space saving areas, and a part of the LM block has been formed using resin to achieve lightweight.
* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.- 2D / 3D CAD data available
Min. Shipping Days ： 14 Days -
Profile rail guideways / carriage dimensions selectable / material selectable / SHS
THK
A standard type of LM guide with ball retainer. Incurs load from four directions which allows it to be used in any position.
* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.- 2D / 3D CAD data available
Min. Shipping Days ： 14 Days -
Miniature profiled rail guides / rail type selectable / carriage dimensions selectable / SRS-G
THK
A full-ball type with not ball retainer on the SRS type.
[Features]
· The LM guide with ball retainer SRS type has a structure that includes two rolling sides on a compact body, which allows the load to be incurred from all sides, and can be used with a single shaft at locations that have limited space requirements and locations that use moment.
· The adoption of the ball retainer has eliminated mutual friction between the balls, which provides excellent high speed, low noise, good sound quality, long life, and being maintenance-free for long periods of time.
· The ball retainer eliminates the mutual friction between the balls, which improves the grease holdability and reduces the raised dust amount.
· The LM block and LM rail both use stainless steel that are highly rust-proof.
· The rail cross-section height is kept low, and it has a compact structure with a single left and right ball row, which allows it be mounted in space saving areas.
· This is a lightweight type where a part (around the ball escape hole, etc.) of the LM block has been insert formed using resin materials.- 2D / 3D CAD data available
Min. Shipping Days ： 19 Days -
Linear guideway carriages / large carriage, carriage dimensions selectable / SHS
THK
An individual block from the THK LM guide SHS series. Extremely useful for sudden design changes and when performing maintenance.
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance, and makes it possible to maintain a constant low friction coefficient, and increase rigidity in four directions.
·
· Cross-section- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 72.04 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Linear guideway carriages / carriage dimensions selectable / material selectable / recirculating ball / SR
THK
An individual block item from the THK LM guide SR series. Extremely useful for sudden design changes and when performing maintenance.
[Features]
· Circulates the ball row using the end plate that is assembled
· in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.
· Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
· Compact / radial type: A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 46.67 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Profile rail guideways / carriage dimensions selectable / material selectable / SR
THK
A type with a compact structure that has a low cross-section height and is resilient against loads in the radial direction. More advantageous than HSR when incurring loads in the radial direction (longevity, precision, rigidity, etc.).
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.
· Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
· A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.
· This is a self-aligning type that can easily absorb error in the level precision and the degree of parallelism for the two shafts, which is capable of highly precise and smooth movements.
· The retainer part on each of the ball rows can obtain rolling motions with limited sound because of the balls being designed to smoothly circulate using the guiding part on the end plate.
· It is possible to maintain precision of long periods of time, have excellent abrasion resistance and limited differential slipping even when there is a preload or uneven loads.
· LM block, LM rail, and LM rail are all compatible with stainless steel.- 2D / 3D CAD data available
Min. Shipping Days ： 14 Days -
Ball retainer with LM guide World standard SHS shape
THK
A best selling THK product. The SHS series can be used in any position.
*When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.- 2D / 3D CAD data available
Min. Shipping Days ： 7 Days -
Profile rail guideways / carriage dimensions selectable / material selectable / HSR
THK
A standard full-ball type. Incurs load from four directions which allows it to be used in any position. A series with the most abundance in variations in size and shape, etc.
* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.- 2D / 3D CAD data available
Min. Shipping Days ： 14 Days -
All Ball LM Guide, World Standard, HSR Type
THK
A best selling THK product. The HSR series can be used in any position.
*When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.- 2D / 3D CAD data available
Min. Shipping Days ： 7 Days -
Linear guideway carriages / large carriage, carriage dimensions selectable / material selectable / recirculating ball bearing / HSR
THK
An individual block from the THK LM guide HSR series. Extremely useful for sudden design changes and when performing maintenance.
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· The ball will not fall out even if the LM rail is removed because it is held by a holding plate. (Excludes the HSR8,10, and 12).
· Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance, and makes it possible to maintain a constant low friction coefficient, and increase rigidity in four directions. Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 64.07 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Profile rail guideways / carriage dimensions selectable / precision / material selectable / SSR
THK
Radial type that is strong against loads in the radial direction. More advantageous than SHS when incurring loads in the radial direction (longevity, precision, rigidity, etc.). A stainless steel type not featured with the SHS is also available.
*When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.- 2D / 3D CAD data available
Min. Shipping Days ： 14 Days -
Linear guideway carriages / carriage dimensions selectable / material selectable / SSR
THK
An individual block from the THK LM guide SSR series. Extremely useful for sudden design changes and when performing maintenance.
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· This ball retainer has been adopted which has eliminated mutual friction between balls and also improves the holding power of the grease.
· , which makes it possible to be maintenance-free over a long term, have a long life, have excellent high speed, and low noise.
· Compact / radial type: A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 51.04 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
Full-Ball Type LM Guide, Radial Type, SR Type
THK
[Features]
·A compact type with a low cross-sectional height, ideal for horizontal guides due to the ball contact structure that is resistant to loads in the radial direction
·Since it is an automatic adjustment type that can absorb the parallelism of the 2 axes and the accuracy error of the level reasonably, high precision and smooth movement can be obtained
·The return part of each ball row is designed so that balls circulate smoothly by the guide part of the end plate, so a rolling motion with a small sound can be obtained
·Even with respect to preload and eccentric load, the differential slip of the ball is small, it has excellent abrasion resistance, and it is possible to maintain accuracy for a long period of time
·LM blocks, LM rails, and balls can be handled with stainless steel
·Even if the LM block is pulled out from the LM rail, the ball is held by the holding plate and will not fall off- 2D / 3D CAD data available
Min. Shipping Days ： 7 Days 
Ball LM guide, radial type, SR-M1 type
THK
High temperature specifications that can be used in maximum temperatures of 150°C, and the grease can also be used in high temperature environments. Has low rolling resistance fluctuation in response to changes in temperature and a dimension consistency treatment has been applied, which has provided excellent dimensional consistency.- 2D CAD data available
Min. Shipping Days ： 39 Days 
All Ball LM Guide, World Standard, HSR-M1 Type for High Temperature
THK
High temperature specifications that can be used in maximum temperatures of 150°C, and the grease can also be used in high temperature environments. Has low rolling resistance fluctuation in response to changes in temperature and a dimension consistency treatment has been applied, which has provided excellent dimensional consistency.
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used from any position.
· The LM guide for use in high temperatures can be used in even higher temperatures of up to 150°C as a result of using a unique technology for the materials, heat treatment, and lubricant.
· Can now be used in temperatures of up to 150°C by using stainless steel end rails and end rails that utilize rubber materials for use in high temperatures.
· A dimensional consistency treatment has been applied to achieve excellent dimensional consistency after applying heat or cooling (may thermally expand under high temperatures).
· The LM block, LM rail, and balls all use stainless steel with excellent corrosion resistance, which is ideal for use in clean rooms.
· Uses a grease for use in high temperatures with limited rolling resistance fluctuations resulting from grease even when the temperature fluctuates from a normal temperature to a high temperature.- 2D CAD data available
Min. Shipping Days ： 54 Days 
LM guide with Ball retainer - Limited stroke EPF type
THK
A limited stroke type. Smooth movement due to there being no ball circulation. Also has a high rigidity compared with conventional products from a structural standpoint. It is particularly advantageous when there are Mc moment requirements.- 2D / 3D CAD data available
Min. Shipping Days ： 24 Days Brand Product Series CAD Starting from∗ Min. Shipping Days ： Set / Single Item Block Type Rail Type Rail Width(mm) Mounting Height H(mm) No. of Blocks Material Rail Length L(mm) Preload Accuracy Nominal Part Number Ball Arrangement Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter 
Brand THK
THK
THK
THK
THK
THK
THK
THK
THK
THK
THK
THK
THK
THK
THK
THK
Product Series Miniature profiled rail guides / rail type selectable / carriage dimensions selectable / SRS
Profile rail guideways / carriage dimensions selectable / material selectable / SHS
Miniature profiled rail guides / rail type selectable / carriage dimensions selectable / SRS-G
Linear guideway carriages / large carriage, carriage dimensions selectable / SHS
Profile rail guideways / carriage dimensions selectable / material selectable / SR
Profile rail guideways / carriage dimensions selectable / material selectable / HSR
Profile rail guideways / carriage dimensions selectable / precision / material selectable / SSR
Linear guideway carriages / carriage dimensions selectable / material selectable / SSR
All Ball LM Guide, World Standard, HSR-M1 Type for High Temperature
CAD - 2D / 3D
- 2D / 3D
- 2D / 3D
- 2D / 3D
- 2D / 3D
- 2D / 3D
- 2D / 3D
- 2D / 3D
- 2D / 3D
- 2D / 3D
- 2D / 3D
- 2D / 3D
- 2D / 3D
- 2D
- 2D
- 2D / 3D
Starting from∗ -
-
-
72.04 €
*Unit price with basic configuration
Volume Discount
46.67 €
*Unit price with basic configuration
Volume Discount
-
-
-
-
64.07 €
*Unit price with basic configuration
Volume Discount
-
51.04 €
*Unit price with basic configuration
Volume Discount
-
-
-
-
Min. Shipping Days ： 14 Days 14 Days 19 Days 5 Days 5 Days 14 Days 7 Days 14 Days 7 Days 5 Days 14 Days 5 Days 7 Days 39 Days 54 Days 24 Days Set / Single Item Set Set Set Block only Block only Set Set Set Set Block only Set Block only Set Set Set Set Block Type Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Rail Type Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Rail Width(mm) 12 ～ 23 15 ～ 63 9 ～ 25 - - 15 ～ 70 15 ～ 34 15 ～ 63 15 ～ 34 - 15 ～ 34 - 15 ～ 20 15 ～ 34 15 ～ 28 7 ～ 15 Mounting Height H(mm) 13 ～ 25 24 ～ 90 10 ～ 25 - - 24 ～ 85 24 ～ 55 28 ～ 90 28 ～ 55 - 24 ～ 48 - - 24 ～ 48 28 ～ 45 8 ～ 16 No. of Blocks 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 1 1 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 1 / 2 / 3 / 4 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 1 / 2 / 3 / 4 1 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 1 - 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 1 Material Stainless Steel Carbon steel Stainless Steel Carbon steel Carbon steel / Stainless Steel Carbon steel / Stainless Steel Carbon steel Carbon steel / Stainless Steel Carbon steel Carbon steel / Stainless Steel Carbon steel / Stainless Steel Carbon steel / Stainless Steel Carbon steel / Stainless Steel Stainless Steel Stainless Steel Stainless Steel Rail Length L(mm) 36 ～ 2000 71 ～ 3000 32 ～ 2000 - - 47 ～ 3000 73 ～ 2920 64 ～ 3000 73 ～ 2920 - 47 ～ 3000 - - 47 ～ 1500 67 ～ 1500 33 ～ 110 Preload Standard / Light Preload Standard / Light Preload / Medium Preload Standard / Light Preload Standard Standard Standard / Light Preload / Medium Preload Standard Standard / Light Preload / Medium Preload Standard Standard Standard / Light Preload Standard - Standard / Light Preload / Medium Preload Standard / Light Preload / Medium Preload - Accuracy Standard Grade / High Grade / Precision Grade Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade Standard Grade / High Grade / Precision Grade Standard Grade Standard Grade Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade Standard Grade Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade Standard Grade Standard Grade Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade Standard Grade - Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade Standard Grade / High Grade / Precision Grade Nominal Part Number 12 ～ 25 15 ～ 65 9X ～ 25 15 ～ 35 15 ～ 35 15 ～ 70 15 ～ 35 15 ～ 65 15 ～ 35 15 ～ 35 15 ～ 35 15 ～ 35 15 ～ 35 15 ～ 35 15 ～ 30 7 ～ 15 Ball Arrangement Standard 4-Row, Circular Standard 4-Row, Circular 4-Row, Circular 4-Row, Circular 4-Row, Circular 4-Row, Circular 4-Row, Circular 4-Row, Circular 4-Row, Circular 4-Row, Circular 4-Row, Circular 4-Row, Circular 4-Row, Circular 4-Row, Circular Retainer Available Available N/A Available N/A N/A Available N/A N/A N/A Available Available N/A N/A N/A Available Block Mounting Hole Pitch (Width Direction)(mm) 20 ～ 35 26 ～ 76 15 ～ 35 26 ～ 50 26 ～ 50 26 ～ 90 26 ～ 50 11.5 ～ 76 26 ～ 50 26 ～ 50 26 ～ 50 26 ～ 50 26 ～ 50 26 ～ 50 11.5 ～ 40 12 ～ 25 Block Mounting Hole Pitch (Length Direction)(mm) 15 ～ 35 26 ～ 120 10 ～ 35 26 ～ 72 26 ～ 50 26 ～ 90 26 ～ 72 18 ～ 120 26 ～ 72 26 ～ 72 26 ～ 50 26 ～ 50 26 ～ 50 26 ～ 50 18 ～ 60 13 ～ 25 Block Mounting Hole Diameter 3 ～ 6 4 ～ 16 3 ～ 6 4 ～ 8 4 ～ 8 4 ～ 16 4 ～ 8 4 ～ 16 4 ～ 8 4 ～ 8 4 ～ 8 4 ～ 8 4 ～ 8 4 ～ 8 4 ～ 8 2 ～ 3 Rail Mounting Hole Pitch(mm) 25 ～ 60 60 ～ 150 20 ～ 60 60 ～ 80 60 ～ 80 60 ～ 150 60 ～ 80 60 ～ 150 60 ～ 80 60 ～ 80 60 ～ 80 60 ～ 80 60 ～ 80 60 ～ 80 60 ～ 80 15 ～ 40 Rail Mounting Hole Diameter 3.5 ～ 7 4.5 ～ 18 3.5 ～ 7 4.5 ～ 9 3.5 ～ 9 3.5 ～ 18 4.5 ～ 9 4.5 ～ 18 4.5 ～ 9 4.5 ～ 9 4.5 ～ 9 4.5 ～ 9 4.5 ～ 9 3.5 ～ 9 4.5 ～ 9 2.4 ～ 3.5 Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Set / Single Item
- Set
- Block only
- Rail Only
-
Block Type
-
Standard -
Short -
Wide -
Wide Long -
Long -
Extra Long -
Wide Short
-
-
Rail Type
-
Standard -
Wide
-
-
Rail Width(mm)
-
Mounting Height H(mm)
-
No. of Blocks
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
-
Material
- Carbon steel
- Stainless Steel
- Aluminum
In the case of Set, the block and rail use the same materials.
-
Rail Length L(mm)
- 25
- 30
- 35
- 40
- 45
- 50
- 55
- 60
- 70
- 74
- 75
- 80
- 85
- 87
- 95
- 96
- 100
- 109
- 110
- 115
- 120
- 125
- 130
- 135
- 140
- 145
- 150
- 155
- 160
- 165
- 170
- 175
- 190
- 195
- 200
- 205
- 215
- 220
- 230
- 235
- 240
- 245
- 250
- 255
- 260
- 265
- 270
- 275
- 280
- 290
- 295
- 300
- 310
- 315
- 320
- 335
- 340
- 345
- 350
- 355
- 360
- 370
- 375
- 390
- 395
- 400
- 415
- 420
- 430
- 435
- 440
- 445
- 455
- 460
- 470
- 475
- 495
- 500
- 510
- 515
- 520
- 535
- 545
- 550
- 555
- 560
- 570
- 575
- 580
- 590
- 595
- 600
- 615
- 620
- 630
- 635
- 640
- 645
- 670
- 680
- 695
- 700
- 710
- 720
- 745
- 750
- 760
- 770
- 790
- 795
- 800
- 820
- 830
- 840
- 845
- 870
- 880
- 895
- 910
- 920
- 940
- 945
- 950
- 970
- 990
- 1000
- 1040
- 1060
- 1080
- 1120
- 1160
- 1180
- 1200
- 1240
- 1300
- 1320
- 1360
- 1400
- 1420
- 1440
- 1480
- 1520
- 1540
- 1560
- 1600
- 1640
- 1660
- 1720
- 1780
- 1800
- 1840
- 1880
- 1900
- 1960
- 2000
- 2080
- 3000
- 3120
- 3960
- 4000
[32-3000/1mm Unit(s)]
-
Preload
- Standard
- Light Preload
- Medium Preload
- Clearance
- Heavy Preload
See the accuracy standard of each manufacturer.
-
Accuracy
- Standard Grade
- High Grade
- Precision Grade
- High Precision Grade
- Ultra Precision Grade
See the accuracy standard of each manufacturer.
-
Nominal Part Number
-
Ball Arrangement
-
Retainer
-
Block Mounting Hole Pitch (Width Direction)(mm)
-
Block Mounting Hole Pitch (Length Direction)(mm)
-
Block Mounting Hole Diameter
-
Rail Mounting Hole Pitch(mm)
-
Rail Mounting Hole Diameter
Narrow search by specifying Brand
-
- MISUMI (24)
- THK (16)
- IKO (6)
- OZAK (4)
- SBC (4)
- BOSCH REXROTH (3)
- INA (0)
- SKF (0)
- GANTER (0)
- NORELEM (0)
- SCHNEEBERGER (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Linear Rail Guides / Profile Rail Guides
Metody płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.