SANDVIK Holding Tools for O.D. Tuning（Applicable Tip Clearance Angle Type：Negative Page 2）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSBNR / L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Starting from∗ ： 150.12 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSDNN
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Starting from∗ ： 135.05 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTFNR / L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Starting from∗ ： 150.12 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTGNR / L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Starting from∗ ： 150.12 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTJNR / L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Starting from∗ ： 135.05 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTTNR / L
SANDVIK
Excellent cutting chip control and process stability for one of the best part qualityStarting from∗ ： 150.12 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DVJNR / L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Starting from∗ ： 256.74 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 190.68 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DVVNN
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Starting from∗ ： 208.07 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DWLNR / L
SANDVIK
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.Starting from∗ ： 135.05 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 284.55 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 284.55 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 324.47 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Outer-Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DCLNR / L
SANDVIK
[Features]
A highly rigid double clamp cutting head for lathe turning
Supports the use of internal coolant
High tool rigidity
Supports the use of negative inserts
Supports everything from roughing through to finishingStarting from∗ ： 345.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 345.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 345.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 345.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 344.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Applicable Tip Shape |
| Application |
| Clamp Shape |
| Cutting Direction |
| Applicable Tip Clearance Angle Type |
| Shank height(mm) |
| Shank width(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK | SANDVIK |
| Product Series | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSBNR / L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSDNN | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTFNR / L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTGNR / L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTJNR / L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTTNR / L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DVJNR / L | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DVVNN | Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DWLNR / L | Outer Diameter Turning, Shank Tool Bit, T-Max P Wedge Clamp MSSNR / L | Outer Diameter Turning, Shank Tool Bit For Profiling, T-Max Top Clamp, R / L170.5 | Outer-Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DCLNR / L | Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DCRNR / L | Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DTFNR / L | Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DTGNR / L | Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, DTJNR / L | ||
| Starting from∗ | 150.12 € *Unit price with basic configuration | 135.05 € Special price *Unit price with basic configuration Promotional pricing | 150.12 € *Unit price with basic configuration | 150.12 € *Unit price with basic configuration | 135.05 € *Unit price with basic configuration | 150.12 € *Unit price with basic configuration | 256.74 € *Unit price with basic configuration | 190.68 € *Unit price with basic configuration | 208.07 € *Unit price with basic configuration | 135.05 € *Unit price with basic configuration | 284.55 € *Unit price with basic configuration | 284.55 € *Unit price with basic configuration | 324.47 € *Unit price with basic configuration | 345.98 € *Unit price with basic configuration | 345.98 € *Unit price with basic configuration | 345.98 € *Unit price with basic configuration | 345.98 € *Unit price with basic configuration | 344.42 € *Unit price with basic configuration |
| Min. Shipping Days ： | 6 Days | 6 Days | 6 Days | 8 Days | 8 Days | 8 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days |
| Applicable Tip Shape | S (Rectangular) | S (Rectangular) | T (Triangle) | T (Triangle) | T (Triangle) | T (Triangle) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | V (35° Diamond-Shaped) | W (Hexagonal Type) | R (Circular) | S (Rectangular) | Other | C (80° Diamond-Shape) | C (80° Diamond-Shape) | T (Triangle) | T (Triangle) | T (Triangle) |
| Application | Outer Diameter | Outer Diameter / Post-Grinding | End Face | Outer Diameter | Outer Diameter | Outer Diameter | Outer Diameter / Profiling / Chamfer | Outer Diameter / Profiling / Chamfer | Outer Diameter / Profiling / Chamfer / Post-Grinding | Outer Diameter / End Face | Outer Diameter / End Face / Profiling | Outer Diameter / End Face / Profiling / Chamfer | Outer Diameter / Profiling / Chamfer | Outer Diameter / End Face / Chamfer | Outer Diameter / End Face / Chamfer | End Face | Outer Diameter | Outer Diameter |
| Clamp Shape | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Lever lock | Double Clamp | Clamp-on | Cable clamp | Cable clamp | Cable clamp | Cable clamp | Cable clamp |
| Cutting Direction | Right-hand / Left-hand | No-hand | Right-hand | Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | No-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand | Right-hand / Left-hand |
| Applicable Tip Clearance Angle Type | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative |
| Shank height(mm) | 20 ～ 50 | 16 ～ 40 | 20 ～ 32 | 20 ～ 25 | 16 ～ 32 | 20 | 32 ～ 40 | 25 ～ 40 | 32 ～ 40 | 16 ～ 32 | 40 | 40 | 40 | - | - | - | - | - |
| Shank width(mm) | 20 ～ 50 | 16 ～ 40 | 20 ～ 32 | 20 ～ 25 | 16 ～ 32 | 20 | 32 ～ 40 | 25 ～ 40 | 25 ～ 40 | 16 ～ 32 | 40 | 40 | 25 | - | - | - | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Applicable Tip Shape
-
Application
-
Clamp Shape
- Clamp-on
- Cable clamp
- Pin Lock
- Screw-on
- Double Clamp
- Lever lock
- Wedge Lock
- Back Surface Clamp
- Other
-
Cutting Direction
- Right-hand
- Left-hand
- No-hand
-
Applicable Tip Clearance Angle Type
- Negative
- Pozidriv
-
Shank height(mm)
-
Shank width(mm)
Narrow search by specifying Brand
-
- SANDVIK (63)
- KYOCERA (57)
- NGK SPARK PLUG (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Holding Tools for O.D. Tuning
Metody płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.