RINGFEDER Keyless Bushing (Fastening Fittings)
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Locking Elements 8006
RINGFEDER
Ideally adaptable clamping element made of stainless steel for large transmission forces in a small space. Absolutely backlash-free, wear-free and maintenance-free. Also suitable for coarser tolerances.- 3D CAD data available
Min. Shipping Days ： 5 Days -
Locking Assemblies 8006 SST
RINGFEDER
Ideally adaptable clamping element made of stainless steel for large transmission forces in a small space. Absolutely backlash-free, wear-free and maintenance-free.- 3D CAD data available
Min. Shipping Days ： 3 Days -
Locking Assemblies Stainless Steel 7061 SST
RINGFEDER
Self-centering 2-piece Locking Assemblies for medium torques. During mounting, minor axial displacement of the hub occurs in opposite direction of the screw head. Due to the small number of screws, cost savings during mounting are ensured. For disassembly only few release screws are required. High-strength clamping screws allow a higher performance range.- 3D CAD data available
Min. Shipping Days ： 5 Days -
Locking Elements Slotted 8006 SST
RINGFEDER
Ideally adaptable clamping element made of stainless steel for large transmission forces in a small space. Absolutely backlash-free, wear-free and maintenance-free. Also suitable for coarser tolerances.- 3D CAD data available
Min. Shipping Days ： 3 Days -
Locking Assemblies 7070
RINGFEDER
Clamping set made of steel with central nut. Ideal for small components, tight installation space. The construction by the central clamping nut makes this clamping set very easy to install and has excellent concentricity and concentricity.- 3D CAD data available
Min. Shipping Days ： 5 Days -
Shrink Disc 4061
RINGFEDER
Shrink disc for high torques. Compensation of smaller tolerances possible with simple assembly and disassembly.- 3D CAD data available
Min. Shipping Days ： 5 Days -
Locking Assemblies 7003
RINGFEDER
Universal clamping set for small installation space. Self-centering and easy to install for medium to high torques.- 3D CAD data available
Min. Shipping Days ： 5 Days -
Locking Assemblies 7015.1
RINGFEDER
Locking Assembly for transmission of torques, axial forces and high bending moments at reduced contact pressures, with special requirements to the true running of the clamped pieces. Special features With the long and flat angle of the cones, the required loads can be transferred with one Locking Assembly RfN 7015.1. During mounting Locking Assembly, shaft and hub remain to each other in position. Compared to three-part construction types, thus an additional safety is provided. Shaft and hub are only compression loaded.- 3D CAD data available
Min. Shipping Days ： 5 Days -
Locking Assemblies 7005
RINGFEDER
Clamping set for high loads and suitable for alternating moments. Ideal for use in belt drums and flywheels.- 3D CAD data available
Min. Shipping Days ： 5 Days -
Locking Assemblies 7061
RINGFEDER
Self-centering clamping set with rough surface pressure, the compact design is ideal for toothed disks.- 3D CAD data available
Min. Shipping Days ： 5 Days -
Locking Assemblies 7012
RINGFEDER
Clamping set with a narrow design. Particularly suitable for tight installation conditions and coarser tolerance fluctuations with high power reserves.- 3D CAD data available
Min. Shipping Days ： 5 Days -
Locking Assemblies 7015
RINGFEDER
The self-centering precision clamping set for the transmission of maximum torques or axial forces with special demands on the concentricity of the parts to be clamped, as well as for applications subject to bending moments.Large transmittable circumferential forces - the long, shallow angles of the cones allow maximum torques or axial forces to be transmitted with a RfN 7015.0 clamping set. During assembly, the clamping set, shaft and hub remain in position relative to each other, thus ensuring additional safety in relation to 3-part construction types. Shaft and hub are only pressure loaded.- 3D CAD data available
Min. Shipping Days ： 5 Days -
Locking Assemblies 7515
RINGFEDER
The self-centering precision Locking Assembly for transmission of torques, axial forces and special optimised for the transmission of bending moments, with special requirements to the true running of the clamped pieces.- 3D CAD data available
Min. Shipping Days ： 5 Days -
Locking Assemblies 7014
RINGFEDER
Clamping set for very high torques. The design allows maximum torques and axial forces to be transmitted with a clamping set.- 3D CAD data available
Min. Shipping Days ： 5 Days -
Locking Assemblies 7080
RINGFEDER
Clamping set made of steel with central nut. Ideal for small components, tight installation space. The construction by the central clamping nut makes this clamping set very easy to install and has excellent concentricity and concentricity. The clamping set is additionally nickel-plated.- 3D CAD data available
Min. Shipping Days ： 5 Days -
Locking Assemblies Stainless Steel 7110 SST
RINGFEDER
Specially small dimensioned self-centering Locking Assembly without axial displacement. As the locking screws are located out of the actual clamping area and the pressures are relatively low, the hub can be designed economically small. Through high-quality materials, the transmission of higher torques possible.- 3D CAD data available
Min. Shipping Days ： 5 Days -
Shrink Disc 4161
RINGFEDER
Two-piece shrink disk for high torque stress. Easy assembly by mounting stop. Good centering and concentricity properties.- 3D CAD data available
Min. Shipping Days ： 5 Days -
Locking Assemblies 7006
RINGFEDER
Universal clamping set for small installation space and axial stop ring. Self-centering and easy to install for medium to high torques.- 3D CAD data available
Min. Shipping Days ： 5 Days -
Locking Assemblies 7085
RINGFEDER
Clamping set made of steel with central nut. Ideal for small components, tight installation space. The construction by the central clamping nut makes this clamping set very easy to install and has excellent concentricity and concentricity. The clamping set is additionally nickel-plated.- 3D CAD data available
Min. Shipping Days ： 5 Days -
Locking Assemblies Stainless Steel 7012 SST
RINGFEDER
Clamping set with small design made of stainless steel. Particularly suitable for tight installation conditions and coarser tolerance fluctuations with high power reserves. High-strength clamping screws allow a higher performance range.- 3D CAD data available
Min. Shipping Days ： 5 Days -
Locking Assemblies 7004
RINGFEDER
Universal clamping set for a wide range of applications. Self centering and mounting friendly at medium to high torques.- 3D CAD data available
Min. Shipping Days ： 5 Days -
Locking Assemblies 7007
RINGFEDER
Universal clamping set for a wide range of applications. Self centering and mounting friendly at medium to high torques. No axial displacement through stop ring.Min. Shipping Days ： 5 Days -
Locking Assemblies 7075
RINGFEDER
Clamping set made of steel with central nut. Ideal for small components, tight installation space. The construction by the central clamping nut makes this clamping set very easy to install and has excellent concentricity and concentricity.- 3D CAD data available
Min. Shipping Days ： 5 Days -
Locking Assemblies 7110
RINGFEDER
Clamping set for hubs with low wall thickness. Ideal for aluminum hubs.- 3D CAD data available
Min. Shipping Days ： 5 Days -
Locking Assemblies Stainless Steel 7013.1 SST
RINGFEDER
Stainless steel clamping set with excellent concentricity and very good disassembly - with these self-centering clamping sets a particularly good concentricity between the clamped parts is achieved. The flange is reinforced at the critical point, this prevents bending and lifting of the inner ring during assembly. This ensures good demountability. Ideal for high speeds, radial loads and for axial hub fixation. High-strength clamping screws allow a higher performance range.- 3D CAD data available
Min. Shipping Days ： 5 Days -
Locking Assemblies Stainless Steel 7090
RINGFEDER
Stainless clamping set with central nut. Ideal for small components, tight installation space. The construction by the central clamping nut makes this clamping set very easy to install and has an excellent concentricity and concentricity.- 3D CAD data available
Min. Shipping Days ： 5 Days -
Locking Elements Slitted 8006
RINGFEDER
Ideally adaptable clamping element made of stainless steel for large transmission forces in a small space. Absolutely backlash-free, wear-free and maintenance-free. Also suitable for coarser tolerances.- 3D CAD data available
Min. Shipping Days ： 5 Days -
Shrink Disc Stainless Steel 4061 SST
RINGFEDER
Shrink disc made of stainless steel for high torques. Compensation of smaller tolerances possible with simple assembly and disassembly. Due to special high-strength materials with increased performance range.- 3D CAD data available
Min. Shipping Days ： 5 Days
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Type |
| Centering |
| Body Material |
| Shaft Bore Dia. d(Ø) |
| Allowable Torque Range(N•m) |
| Surface Treatment |
| Hub Dia. D1(Ø) |
| Tightening Structure |
| Tightening Method |
| Allowable Torque(N•m) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER | RINGFEDER |
| Product Series | ||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Starting from∗ | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Min. Shipping Days ： | 5 Days | 3 Days | 5 Days | 3 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days |
| Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Centering | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Body Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shaft Bore Dia. d(Ø) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Allowable Torque Range(N•m) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Surface Treatment | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Hub Dia. D1(Ø) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tightening Structure | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tightening Method | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Allowable Torque(N•m) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Type
-
Flanged -
Straight -
Nut Tightening -
Thin Wall -
Direct Mounting -
Sleeve
-
-
Centering
- Provided
- Not Provided
-
Body Material
- Steel
- Stainless Steel
- Aluminum
- Grey Iron
-
Shaft Bore Dia. d(Ø)
-
Allowable Torque Range(N•m)
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- Clear Anodize
-
Hub Dia. D1(Ø)
-
Tightening Structure
-
Tightening Method
-
Allowable Torque(N•m)
Narrow search by specifying Brand
-
- MISUMI (6)
- MAEDLER (61)
- RINGFEDER (28)
- CONCAR (26)
- ISEL (10)
- KBK (9)
- SUNGIL (9)
- NORELEM (3)
- KATAYAMA CHAIN (3)
- OPTIBELT (2)
- CAP (2)
- MIKI PULLEY (2)
- HALDER (2)
- Save & Secure (2)
- EVER-ON CORPORATION (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Examples how you can use these components Test
Categories related to Keyless Bushing (Fastening Fittings)
Metody płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.