RECOIL Insert

Insert to prevent screw galling (seizing). No lubricating oil required. (Helisert and sprue).

Made from regular 304 grade stainless steel (18–8), but inserts made from other application-specific materials are also manufactured.

Electrical junction joint up to 300 °C. Insert for non-magnetic application (Helisert and sprue).

The stress is dispersed throughout the entire engagement length, does not incur screw thread breaks, has increased holding power or tensile strength, and has greater fastening power than the original screw.

The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.

The color of the main body will become silver when the method of heat treatment changes.Not plated. (Inconel Black Recoil)An insert (Helisert/Sprue) for use at high temperatures (425–550°C) and with non-magnetic applications.[Features]· Nickel alloy.· For use at high temperatures (425–550°C [800–1,000°F]) and with non-magnetic applications.

The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.

An insert for corrosion resistance and non-magnetic applications (Helisert and sprue).

A male screw repair kit for individual recoils that is widely used throughout the world in repair and maintenance associated with industrial machinery, automobiles, and motorcycles.

Includes an insertion tool with tap handle functionality. A magnet-type extraction tool has also been set together with this.

[Type] Threaded Insert Use[Application] Light Metal [Materials] SUS304 with Notch[Application] Light Metal [Screw type] Coarse/Fine Screw Diameter (after insertion) 2 2.2 2.5 3 3.5 4 5 6 7 8 9 10 11 12 14 16 18 20 Length (after insertion)[L](D = screw diameter M) 1D 1.5D 2D [Sales unit] Minimum Quantity (Available for Purchase from 1 pc) Box and Pkg. [Pitch (mm)] 0.4 0.45 0.5 0.6 0.7 0.8 1.0 1.25 1.5 1.75 2.0 2.5 Usage Environment: Internal Combustion Engines/Manufacturing Equipment Quantity 5 10

*Unfortunately, only lengths of 1.5D are available.

[Features]· Recoil taps differ from ordinary taps, designed for exclusive use with screw thread inserts (STI). They have a large diameter but the same pitch as a standard tap in order to accommodate the Recoil Inserts. · Recoil Taps are manufactured to precise standards from High Speed steel (HSS or HSS-E) with ground threads and are available in Intermediate and Bottoming leads. · In addition to hand taps, Spiral Point and Spiral Flute machine taps are also available for mass production purposes. In addition, for all spark plug applications pilot nose taps are available, which do not require a special recoil drill. The Recoil thread inserts when installed into a correctly tapped hole will provide the applicable internal thread tolerance for the installed bolt. · Intermediate tap...The most commonly used tap, mainly used for through hole applications. 4 -thread lead. · Bottoming tap...Used when tapping to the bottom of a blind hole. 2-Thread lead, and is normally used after a taper tap or intermediate tap.

Includes an insertion tool with tap handle functionality. A magnet-type extraction tool has also been set together with this.[Features]· A male screw repair kit for individual recoils that is widely used throughout the world in repair associated with industrial machinery, automobiles, and motorcycles.· The following parts are included in the red plastic box.· Drill for bottom hole (M12-1 / 2 or less), recoil tap #2 (HSS), recoil (length 1.5D), insertion tool (M12-1 / 2 or less, and includes tap handle), extraction tool with magnet (M12-1 / 2 or less).· The spark plug kit includes a pilot tap.· The pilot tap does not use a drill

Includes an insertion tool with tap handle functionality. A magnet-type extraction tool has also been set together with this.

*Unfortunately, only lengths of 1.5D are available.[Features]• Recoil created by winding high quality stainless steel wire with a rhomboid cross section into a spring shape• Insert is made one turn larger than the base material hole, and has a mild taper• Once installed, the spring action makes it an almost permanent fixture that cannot be extracted.

Recoil, threaded insert, non-recoil special size. [Thread type]Coarse. " Material: EN 1.4301 Equiv. (sintered)

The material is normal stainless steel 304 (18–8), but the material has been manufactured with other materials added for special applications.

Recoil lock type insert designed to stop bolts from loosening during severe vibration or temperature changes.

The spark plug kit includes a pre-cutter. Thread diameter (after insertion) M (mm) 14 Types: Thread insert / Thread type: Fine / Material: EN 1.4301 Equiv. (sintered) / Purchase unit: Box/package