OMRON PLC (Input/Output Units)（Connection Terminal：Terminal Block）

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 12 Days or Less 19 Days or Less 23 Days or Less

?* Information on days to ship and prices

NX Series Position Interface Pulse Output Unit NX-PG0□□□

OMRON

Positioning control with pulse outputs to command stepper motor drives and other pulse input motor drives

■ Features
· The MC Function Module of the NJ/NX/NY5 Controller allows you to
connect with as many axes as the NJ/NX/NY5 Controller can control
· High-speed remote I/O control with communications cycle as fast as 125 μs*1
· Multiple stepping motors and servo motors can be operated in synchronization by
using synchronous I/O refreshing or task period prioritized refreshing*2
· Latching (2 external latch inputs)
· Open collector pulse outputs up to 500 kHz
or line driver pulse outputs up to 4 MHz
· Line driver output models with 2 or 4 channels

*1 When using the NX-EC01□□ together with the NX701-□□□□ and NX-ECC203.
* *2 Task period prioritized refreshing is available when the NX-ECC203 is used together.

Starting from^∗ ：	463.67 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Programmable Controller CP1L Expansion I / O Unit

OMRON

Programmable Controller CP1L Expansion I/O Unit

Starting from^∗ ：	359.07 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

I / O Control Unit, I / O Interface Unit

OMRON

I/O Control Unit, I/O Interface Unit

Starting from^∗ ：	318.67 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

NX Series Digital Output Unit NX-OD Transistor Output Unit

OMRON

Digital output unit that is available in many variations, from high-speed types that enable high-speed synchronization control to general-purpose types

■ Features
· Can be mounted on an EtherCAT coupler to enable high-speed I/O refreshing
· Enables I/O refreshing synchronized with the controller control period (synchronous refresh)
· Using this unit in combination with an NX Series CPU Unit or EtherCAT Coupler Unit, an NX unit that uses a time stamping input method,
and an NX unit that uses a time-specific output method enables highly precise I/O control that does not depend on the
controller's control period
· The use of a removable terminal block improves system maintainability
· The Push-In Plus terminal block (screwless clamp terminal block) and connector type (MIL connector / Fujitsu connector)
greatly reduce the time required for wiring work
· A unit width of only 12 mm realizes space saving (connector type 30 mm)
· 2-, 4-, 8-, 16- and 32-output-contact types are available, enabling the I/O configuration that best suits your equipment
· Connect to the CJ Series using the EtherNet/IP coupler

Starting from^∗ ：	136.54 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

C Series C500 CompoNet Slave

OMRON

C Series C500 CompoNet Slave

Volume Discount

Starting from^∗ ：	450.54 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Input / Output Unit CS1W

OMRON

Input/Output Unit CS1W

Starting from^∗ ：	628.00 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

NX Series Digital Output Unit NX-OC Relay Output Unit

OMRON

Starting from^∗ ：	134.87 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

NX Series Digital Input Unit NX-ID DC Input Unit

OMRON

Digital input unit that is available in many variations, from high-speed types that enable high-speed synchronization control to general-purpose types

■ Features
· Can be mounted on an EtherCAT coupler to enable high-speed I/O refreshing
· Enables I/O refreshing synchronized with the controller control period (synchronous refresh)
· Using this unit in combination with an NX Series CPU Unit or EtherCAT Coupler Unit, an NX unit that uses a time-stamping input method,
and an NX unit that uses a time-specific output method enables highly precise I/O control that does not depend on the
controller's control period
· The use of a removable terminal block improves system maintainability
· The Push-In Plus terminal block (screwless clamp terminal block) and connector type (MIL connector / Fujitsu connector)
greatly reduce the time required for wiring work
· A unit width of only 12 mm realizes space saving (connector type 30 mm)
· 4-, 8-, 16- and 32-input-contact types are available, enabling the I/O configuration that best suits your equipment
· Connect to the CJ Series using the EtherNet/IP coupler

Volume Discount

Starting from^∗ ：	163.21 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

NX Series Incremental Encoder Input Unit NX-EC0□□□

OMRON

Enables more precise timing control by synchronizing the encoder data with the time data

■ Features
· Open-collector-output type and line-driver-output type incremental encoders can be connected
· High-speed remote I/O control with communications cycle as fast as 125 μs*1
· Free-run refreshing, synchronous I/O refreshing, or
task period prioritized refreshing*2 with the NX1P2 CPU Unit or EtherCAT Coupler Unit
· The MC Function Module of the NJ/NX/NY5 Controllers allows the encoder
to be used as a motion axis
· Latching (1 internal signal and 2 input signals from external devices)
· Pulse period measurement
· 32-bit counters (80000000 to 7FFFFFFF HEX)
· Maximum counting rate: 4 MHz (Line receiver: 4 MHz; Open collector: 500 kHz)
· Time stamping
· Maximum and minimum counter value setting
· Connect to the CJ PLC using the EtherNet/IP coupler

*1 When using the NX-EC01□□ together with the NX701-□□□□ and NX-ECC203.
*2 Task period prioritized refreshing is available when the NX-ECC203 is used together.

Starting from^∗ ：	575.70 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

NX Series Safety I / O Unit NX-SI / SO

OMRON

Adds a Safety CPU Unit and Safety I/O Unit to an EtherCAT coupler to enable unified safety control

■ Features
· EN ISO 13849-1 (PLe / Safety Category 4), IEC 61508 (SIL3) certified
· Incorporating the Safety over EtherCAT (FSoE)* protocol enables both standard control and safety control on the same EtherCAT
· There are 2 types of Safety Input Unit: a 4-point type and an 8-point type, and 2 types of Safety Output Unit, a 2-point type and a 4-point type
· Safety units can be freely combined and placed with standard units

*The open protocol Safety over EtherCAT (abbreviated as FSoE; "FailSafe over EtherCAT") defines a
safety-related communication layer for EtherCAT.
Complies with the requirements of IEC 61508 (SIL3), enabling communication of safety data and standard data on the same communication system without
communication speed or cycle time restrictions.

Volume Discount

Starting from^∗ ：	205.08 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days ：
Number Of Inputs
Input Format
Rated Input Voltage(V)
Number of Outputs
Output Format
Rated load voltage(V)
Protection function
Connection Terminal
Representative Standard


Brand	OMRON	OMRON	OMRON	OMRON	OMRON	OMRON	OMRON	OMRON	OMRON	OMRON
Product Series	NX Series Position Interface Pulse Output Unit NX-PG0□□□	Programmable Controller CP1L Expansion I / O Unit	I / O Control Unit, I / O Interface Unit	NX Series Digital Output Unit NX-OD Transistor Output Unit	C Series C500 CompoNet Slave	Input / Output Unit CS1W	NX Series Digital Output Unit NX-OC Relay Output Unit	NX Series Digital Input Unit NX-ID DC Input Unit	NX Series Incremental Encoder Input Unit NX-EC0□□□	NX Series Safety I / O Unit NX-SI / SO
Starting from^∗	463.67 € *Unit price with basic configuration	359.07 € *Unit price with basic configuration	318.67 € *Unit price with basic configuration	136.54 € *Unit price with basic configuration	450.54 € *Unit price with basic configuration Volume Discount	628.00 € *Unit price with basic configuration	134.87 € *Unit price with basic configuration	163.21 € *Unit price with basic configuration	575.70 € *Unit price with basic configuration	205.08 € *Unit price with basic configuration
Min. Shipping Days ：	6 Days	7 Days	7 Days	6 Days	6 Days	7 Days	6 Days	6 Days	6 Days	6 Days
Number Of Inputs	-	8 ～ 24	8	-	32	16	-	16	-	-
Input Format	Other	DC input	DC input	-	DC input	DC input / AC input / AC/DC input	-	DC input	Other	-
Rated Input Voltage(V)	-	-	12–24	DC24	12–24 ～ 24	24 ～ 200 to 240	-	24	-	-
Number of Outputs	-	8 ～ 32	-	16 ～ 32	32	8 ～ 16	-	-	-	-
Output Format	-	Relay contact output / Transistor / source output / Transistor / sync output	-	Transistor / source output / Other	Relay contact output / Transistor / sync output / Other	Relay contact output / Triac output / Transistor / source output / Transistor / sync output	Relay contact output	-	-	Transistor / source output
Rated load voltage(V)	-	-	-	-	-	-	-	-	-	-
Protection function	-	-	-	Other	-	-	-	-	-	Other
Connection Terminal	Terminal Block	Terminal Block	Terminal Block	Terminal Block	Terminal Block	Terminal Block	Terminal Block	Terminal Block	Terminal Block	Terminal Block
Representative Standard	CE / UL / CUL / CSA	CE / UL / CSA	CE / UL / CUL / CSA	CE / UL / CUL / TUV / CSA	-	CE / UL / CUL / CSA	CE / UL / CUL / CSA	CE / UL / CUL / CSA	CE / UL / CUL / CSA	CE / UL / CUL / TUV