NABEYA BI-TECH Screws with Through Hole

● Gas vent holes make it easier to discharge gases accumulated at the bottom of equipment screw holes, and support the operation of vacuuming equipment. ● Gas vent holes are processed using a method that has less effect on the metal structure. Suppresses brittle fracturing and the generation of out-gas in vacuum environments during use.

● The ventilation hole easily releases gas trapped in the screw holes of equipment and machines while supporting vacuum drawing in vacuum devices. ● The flat head that is flush after tightening.

For FPD manufacturing equipment, semiconductor manufacturing equipment and other vacuum equipment and chambers in clean rooms.

● Gas vent holes make it easier to discharge gases accumulated at the bottom of equipment screw holes, and support the operation of vacuuming equipment. ● Flat screw type with a head that does not protrude after tightening.

· All heads are 1.5 mm or less. There is no need to worry about protruding screw heads after tightening. For improving the compactness and safety of equipment and systems. For FPD manufacturing equipment, semiconductor manufacturing equipment and other vacuum equipment and chambers in clean rooms.

[Features]· Made of SUS316L. Excellent corrosion resistance.· For FPD manufacturing equipment, semiconductor manufacturing equipment and other vacuum equipment and chambers in clean rooms.· Cleaned and purified.· Oil and dust resistant.· The surface coarseness of the SVSL-PC has been modified with special chemical processing. Only tiny amounts of gas are emitted.· The thread length can be cut to your specifications. The SVSL-PC is not covered.

For FPD manufacturing equipment, semiconductor manufacturing equipment and other vacuum equipment and chambers in clean rooms. Cleaned and purified. Oil and dust resistant.

Hexagonal socket head bolt with a thin, flat head. For improving the compactness and safety of equipment and systems. For FPD manufacturing equipment, semiconductor manufacturing equipment and other vacuum equipment and chambers in clean rooms.

These bolts are non-magnetic. Suitable for FPD manufacturing equipment, semiconductor manufacturing equipment, and electronic equipment that require non-magnetic properties. The surface has been modified via special chemical polishing and brightening treatments. Oil and dust do not adhere to the surface, and there is minimal gas discharge.

● The ventilation hole easily releases gas trapped in the screw holes of equipment and machines while supporting vacuum drawing in vacuum devices. ● The shot-blasted molybdenum disulfide particles enhance screw lubrication to prevent seizing. ● Unlike normal molybdenum disulfide lubrication, molybdenum disulfide shot does not use a bonding agent, meaning ingredients can be identified easily.