MAEDLER Set Collars / Clamping Rings
Narrow search by specifying Tightening Method
-
Set Screw -
Slit -
Split -
Hinged -
Wedge -
One-Touch -
Surface Pressure
?* Information on days to ship and prices
-
Adjusting Rings DIN 705 A, with Hexagon Socket Set Screw, Stainless Steel
MAEDLER
Material: Stainless steel 1.4305 (AISI 303).
Light-duty series. With set screw made from stainless steel. Set screw with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).
Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw. From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.
Bright turned and calibrated. Bores tolerance H8.
Large chamfer on one side of the outside diameter.
Temperature range: -40ºC to +175ºC.
* At size 9, the outer dimensions are not like DIN 705.- Volume Discount
Starting from∗ ： 1.42 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars Single-Split, Steel, Zinc-plated
MAEDLER
Material: Steel C45, zinc-plated, screw steel 12.9.
Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 3.70 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars Double-Split, Stainless Steel
MAEDLER
Material: Stainless steel 1.4305 (AISI 303), Screws stainless steel A2-70.
Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 9.79 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars, Single-Split - Type S, Aluminium
MAEDLER
Material: Aluminium, screw stainless steel A2-70.
Type S: Slim version, e.g. for encoders.
The thread of the screw DIN 912 is covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 4.39 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars Single-Split, Aluminium
MAEDLER
Material: Aluminium, screw stainless steel A2-70.
Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 3.87 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Quick Release Shaft Collars
MAEDLER
Material: Aluminium, black anodized.
Eccentric lever gold-colored anodized.
Screw and axis stainless steel.
Features: With eccentric lever.
Easy to mount and quickly to readjust.
Does not damage the shaft.
Even distribution of clamping force.
The lever force and clamping force can be set exactly by the adjusting screw with allen. The pivot point and the lever must always be well lubricated.- Volume Discount
Starting from∗ ： 42.62 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars, Double-Split - Type S, Aluminium
MAEDLER
Material: Aluminium, screw stainless steel A2-70.
Type S: Slim version, e.g. for encoders.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 8.96 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars, Single-Split - Type S, Stainless Steel
MAEDLER
Material: Stainless steel 1.4305 (AISI 303), screw stainless A2-70.
Type S: Slim version, e.g. for encoders.
The thread of the screw DIN 912 is covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 5.91 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars, Double-Split - Type S, Stainless Steel
MAEDLER
Material: Stainless steel 1.4305 (AISI 303), screw stainless A2-70.
Type S: Slim version, e.g. for encoders.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 8.96 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars Single-Split, Inch Size Bore, Aluminium
MAEDLER
Material: Aluminium, screw stainless steel A2-70.
Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precise bores in inch size.
The threads of the metric screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 3.92 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars Double-Split, Aluminium Anodized
MAEDLER
Material: Aluminium anodized, screws stainless steel A2-70.
Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 10.44 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars, Single-Split - Type GRK with Clamping Lever, Stainless Steel
MAEDLER
Material: Stainless steel 1.4305 (AISI 303).
Handle: Zinc die-cast, plastic coated, black.
Screw: Stainless steel 1.4305 (AISI 303).
Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores. The disengageable, adjustable clamping lever enables an easy readjustment without tools.
Type GRK: With mounting flat and two radial mounting bores, with thread.
Tolerance b: +0.08 mm / -0.25 mm
Temperature resistant up to +90ºC.- Volume Discount
Starting from∗ ： 22.84 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars, Double-Split - Type N, Stainless Steel
MAEDLER
Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70.
Type N: With keyway DIN 6885-1.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 12.22 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars, Double-Split - Type GR, Steel, Black Oxide Finish
MAEDLER
Material: Steel C45, black oxide finish, screws steel 12.9.
Type GR: With mounting flat and two radial mounting bores, with thread.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 10.87 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars with Thread, Double-Split, Steel, Black Oxide Finish
MAEDLER
Material: Steel C45, black oxide finish, screws steel 12.9.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Max. speed: 4,000 min-1.
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 8.96 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars Double-Split, Steel, Zinc-plated
MAEDLER
Material: Steel C45, zinc-plated, Screws steel 12.9.
Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 6.18 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars Double-Split, Inch Size Bore, Aluminium
MAEDLER
Material: Aluminium, screws stainless steel A2-70.
Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precise bores in inch size.
The threads of the metric screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 6.60 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Adjusting Rings DIN 705 A, with Hexagon Socket Set Screw, Steel, Black Oxide Finish
MAEDLER
Material: Steel, black oxide finish.
Light-duty series. With set screw made from steel. Set screw with hexagon socket as in DIN EN ISO 4027 (formerly DIN 914).
Up to size d1 = 70 mm: Against DIN 705 A, with one screw with hexagon socket instead of slotted screw. From size d1 = 75 mm: As in DIN 705 A, with 2 screws with hexagon socket, with offset 135°.
Bright turned and calibrated. Bores tolerance H8.
Large chamfer on one side of the outside diameter.
Temperature range: -40ºC to +175ºC.
* At size 9, the outer dimensions are not like DIN 705.- Volume Discount
Starting from∗ ： 0.92 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Rubber Pads for Shaft Collars B1
MAEDLER
Material: Rubber NBR, black, 70º +/-5º Shore A.
These oil-resistant rubber pads can be cliped into the axial bores of the MÄDLER® shaft collars type B1. The rubber pads enable a careful and vibration-damping clamping of a machine component on a shaft.
For mounting, the pins should be lubricated with oil or grease. At collars from stainless steel, tire mounting paste or alternatively hand dishwashing detergent can also be used.- Volume Discount
Starting from∗ ： 0.65 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars Double Wide, Double-Split, Stainless Steel
MAEDLER
Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70.
Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 17.02 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars Double Wide, Double-Split, Steel
MAEDLER
Material: Steel C45, black oxide finish, screws steel 12.9.
Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 12.96 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars Double Wide, Single-Split, Stainless Steel
MAEDLER
Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70.
Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 16.16 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars Double Wide, Single-Split, Steel
MAEDLER
Material: Steel C45, black oxide finish, screws steel 12.9.
Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 11.25 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars Double-Split, Aluminium
MAEDLER
Material: Aluminium, screws stainless steel A2-70.
Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores. The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 6.12 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars Double-Split, Steel, Black Oxide Finish
MAEDLER
Material: Steel C45, black oxide finish, Screws steel 12.9.
Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 5.60 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars Single-Split, Aluminium Anodized
MAEDLER
Material: Aluminium anodized, screw stainless steel A2-70.
Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 8.18 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars Single-Split, Stainless Steel
MAEDLER
Material: Stainless steel 1.4305 (AISI 303), screw stainless steel A2-70.
Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 6.91 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars Single-Split, Steel, Black Oxide Finish
MAEDLER
Material: Steel C45, black oxide finish, screw steel 12.9.
Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, easy readjustment, precision honed bores.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 3.36 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars with Thread, Stainless Steel
MAEDLER
Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Max. speed: 4,000 min-1.
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 17.04 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars with Thread, Steel
MAEDLER
Material: Steel C45, black oxide finish, screws steel 12.9.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Max. speed: 4,000 min-1.
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 6.05 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Adjusting Rings (Shaft Collars with Set Screw) According to the Old Standard DIN 703, Stainless Steel
MAEDLER
Material: Stainless steel 1.4305 (AISI 303).
Heavy-duty series. With allen set screw like DIN EN ISO 4027 (formerly DIN 914), but stainless steel A2. From size d1=70mm with 2 set screws, with offset 135°.
Bright turned and calibrated. Bores tolerance H8.
Large chamfer on one side of the outside diameter.
Temperature range: -40ºC to +175ºC.
* Size 20 is not part of the old standard DIN 703.- Volume Discount
Starting from∗ ： 7.60 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Adjusting Rings (Shaft Collars with Set Screw) According to the Old Standard DIN 703, Steel, Black Oxide Finish
MAEDLER
Material: Steel, black oxide finish.
Heavy-duty series. With allen set screw made from steel like DIN EN ISO 4027 (formerly DIN 914), but strength 12.9. From size d1=70mm with 2 set screws, with offset 135°.
Bright turned and calibrated. Bores tolerance H8.
Large chamfer on one side of the outside diameter.
Temperature range: -40ºC to +175ºC.
* Size 20 is not part of the old standard DIN 703.- Volume Discount
Starting from∗ ： 5.06 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars, Single-Split - Type N, Steel, Black Oxide Fnish
MAEDLER
Material: Steel C45, black oxide finish, screws steel 12.9.
Type N: With keyway DIN 6885-1.
The thread of the screw DIN 912 is covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 6.95 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars, Single-Split - Type N, Stainless Steel
MAEDLER
Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70.
Type N: With keyway DIN 6885-1.
The thread of the screw DIN 912 is covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 11.72 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars, Single-Split - Type GRK with Clamping Lever, Steel, Black Oxide Finish
MAEDLER
Material: Steel C45, black oxide finish.
Handle: Zinc die-cast, plastic coated, black.
Screw: Stainless steel 1.4305 (AISI 303).
Features: Does not damage the shaft, stronger clamping force than with set collars, even distribution of clamping forces, precise bores. The disengageable, adjustable clamping lever enables an easy readjustment without tools.
Type GRK: With mounting flat and two radial mounting bores, with thread.
Tolerance b: +0.08 mm / -0.25 mm
Temperature resistant up to +90ºC.- Volume Discount
Starting from∗ ： 17.81 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars, Single-Split - Type GR, Steel, Black Oxide Finish
MAEDLER
Material: Steel C45, black oxide finish, screws steel 12.9.
Type GR: With mounting flat and two radial mounting bores, with thread.
The thread of the screw DIN 912 is covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 8.92 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars, Single-Split - Type GR, Stainless Steel
MAEDLER
Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70.
Type GR: With mounting flat and two radial mounting bores, with thread.
The thread of the screw DIN 912 is covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 13.30 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars, Single-Split - Type GA, Steel, Black Oxide Finish
MAEDLER
Material: Steel C45, black oxide finish, screws steel 12.9.
Type GA: With two axial mounting bores, with thread.
The thread of the screw DIN 912 is covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 8.48 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars, Single-Split - Type GA, Stainless Steel
MAEDLER
Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70.
Type GA: With two axial mounting bores, with thread.
The thread of the screw DIN 912 is covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 12.69 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars, Single-Split - Type B1 and B2, Steel, Black Oxide Finish
MAEDLER
Material: Steel C45, black oxide finish, screws steel 12.9.
Type B1: With two axial mounting bores.
Type B2: With two axial mounting bores, with sunk holes for cylindrical screws DIN 912.
The thread of the screw DIN 912 is covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.
* Fitting screw size for B1.
** Fitting screw size for B2.- Volume Discount
Starting from∗ ： 7.68 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars, Single-Split - Type B1 and B2, Stainless Steel
MAEDLER
Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70.
Type B1: With two axial mounting bores.
Type B2: With two axial mounting bores, with sunk holes for cylindrical screws DIN 912.
The thread of the screw DIN 912 is covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.
* Fitting screw size for B1.
** Fitting screw size for B2.- Volume Discount
Starting from∗ ： 13.88 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars, Double-Split - Type N, Steel, Black Oxide Finish
MAEDLER
Material: Steel C45, black oxide finish, screws steel 12.9.
Type N: With keyway DIN 6885-1.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 7.98 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars, Double-Split - Type GR, Stainless Steel
MAEDLER
Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70.
Type GR: With mounting flat and two radial mounting bores, with thread.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 14.99 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars, Double-Split - Type GA, Steel, Black Oxide Finish
MAEDLER
Material: Steel C45, black oxide finish, screws steel 12.9.
Type GA: With two axial mounting bores, with thread.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 10.34 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Shaft Collars, Clamp Collars, Double-Split - Type GA, Stainless Steel
MAEDLER
Material: Stainless steel 1.4305 (AISI 303), screws stainless steel A2-70.
Type GA: With two axial mounting bores, with thread.
The threads of the screws DIN 912 are covered with a layer of polyamide.
Tolerance b: +0.08 mm / -0.25 mm
Temperature range: -40ºC to +175ºC.- Volume Discount
Starting from∗ ： 14.22 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Tightening Method |
| RoHS Information |
| Specifications |
| Features, Areas of Application |
| I.D.(mm) |
| O.D.(mm) |
| Width(mm) |
| Material |
| Surface Treatment |
| Thickness |
| Side Surface Machining |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER |
| Product Series | Adjusting Rings DIN 705 A, with Hexagon Socket Set Screw, Stainless Steel | Shaft Collars, Clamp Collars Single-Split, Steel, Zinc-plated | Shaft Collars, Clamp Collars, Single-Split - Type S, Aluminium | Shaft Collars, Clamp Collars, Double-Split - Type S, Aluminium | Shaft Collars, Clamp Collars, Single-Split - Type S, Stainless Steel | Shaft Collars, Clamp Collars, Double-Split - Type S, Stainless Steel | Shaft Collars, Clamp Collars Single-Split, Inch Size Bore, Aluminium | Shaft Collars, Clamp Collars Double-Split, Aluminium Anodized | Shaft Collars, Clamp Collars, Single-Split - Type GRK with Clamping Lever, Stainless Steel | Shaft Collars, Clamp Collars, Double-Split - Type N, Stainless Steel | Shaft Collars, Clamp Collars, Double-Split - Type GR, Steel, Black Oxide Finish | Shaft Collars, Clamp Collars with Thread, Double-Split, Steel, Black Oxide Finish | Shaft Collars, Clamp Collars Double-Split, Steel, Zinc-plated | Shaft Collars, Clamp Collars Double-Split, Inch Size Bore, Aluminium | Adjusting Rings DIN 705 A, with Hexagon Socket Set Screw, Steel, Black Oxide Finish | Shaft Collars, Clamp Collars Double Wide, Double-Split, Stainless Steel | Shaft Collars, Clamp Collars Double Wide, Double-Split, Steel | Shaft Collars, Clamp Collars Double Wide, Single-Split, Stainless Steel | Shaft Collars, Clamp Collars Double Wide, Single-Split, Steel | Shaft Collars, Clamp Collars Double-Split, Steel, Black Oxide Finish | Shaft Collars, Clamp Collars Single-Split, Aluminium Anodized | Shaft Collars, Clamp Collars Single-Split, Steel, Black Oxide Finish | Shaft Collars, Clamp Collars, Single-Split - Type N, Steel, Black Oxide Fnish | Shaft Collars, Clamp Collars, Single-Split - Type N, Stainless Steel | Shaft Collars, Clamp Collars, Single-Split - Type GRK with Clamping Lever, Steel, Black Oxide Finish | Shaft Collars, Clamp Collars, Single-Split - Type GR, Steel, Black Oxide Finish | Shaft Collars, Clamp Collars, Single-Split - Type GR, Stainless Steel | Shaft Collars, Clamp Collars, Single-Split - Type GA, Steel, Black Oxide Finish | Shaft Collars, Clamp Collars, Single-Split - Type GA, Stainless Steel | Shaft Collars, Clamp Collars, Single-Split - Type B1 and B2, Steel, Black Oxide Finish | Shaft Collars, Clamp Collars, Single-Split - Type B1 and B2, Stainless Steel | Shaft Collars, Clamp Collars, Double-Split - Type N, Steel, Black Oxide Finish | Shaft Collars, Clamp Collars, Double-Split - Type GR, Stainless Steel | Shaft Collars, Clamp Collars, Double-Split - Type GA, Steel, Black Oxide Finish | Shaft Collars, Clamp Collars, Double-Split - Type GA, Stainless Steel | ||||||||||
| Starting from∗ | 1.42 € *Unit price with basic configuration Volume Discount | 3.70 € *Unit price with basic configuration Volume Discount | 9.79 € *Unit price with basic configuration Volume Discount | 4.39 € *Unit price with basic configuration Volume Discount | 3.87 € *Unit price with basic configuration Volume Discount | 42.62 € *Unit price with basic configuration Volume Discount | 8.96 € *Unit price with basic configuration Volume Discount | 5.91 € *Unit price with basic configuration Volume Discount | 8.96 € *Unit price with basic configuration Volume Discount | 3.92 € *Unit price with basic configuration Volume Discount | 10.44 € *Unit price with basic configuration Volume Discount | 22.84 € *Unit price with basic configuration Volume Discount | 12.22 € *Unit price with basic configuration Volume Discount | 10.87 € *Unit price with basic configuration Volume Discount | 8.96 € *Unit price with basic configuration Volume Discount | 6.18 € *Unit price with basic configuration Volume Discount | 6.60 € *Unit price with basic configuration Volume Discount | 0.92 € *Unit price with basic configuration Volume Discount | 0.65 € *Unit price with basic configuration Volume Discount | 17.02 € *Unit price with basic configuration Volume Discount | 12.96 € *Unit price with basic configuration Volume Discount | 16.16 € *Unit price with basic configuration Volume Discount | 11.25 € *Unit price with basic configuration Volume Discount | 6.12 € *Unit price with basic configuration Volume Discount | 5.60 € *Unit price with basic configuration Volume Discount | 8.18 € *Unit price with basic configuration Volume Discount | 6.91 € *Unit price with basic configuration Volume Discount | 3.36 € *Unit price with basic configuration Volume Discount | 17.04 € *Unit price with basic configuration Volume Discount | 6.05 € *Unit price with basic configuration Volume Discount | 7.60 € *Unit price with basic configuration Volume Discount | 5.06 € *Unit price with basic configuration Volume Discount | 6.95 € *Unit price with basic configuration Volume Discount | 11.72 € *Unit price with basic configuration Volume Discount | 17.81 € *Unit price with basic configuration Volume Discount | 8.92 € *Unit price with basic configuration Volume Discount | 13.30 € *Unit price with basic configuration Volume Discount | 8.48 € *Unit price with basic configuration Volume Discount | 12.69 € *Unit price with basic configuration Volume Discount | 7.68 € *Unit price with basic configuration Volume Discount | 13.88 € *Unit price with basic configuration Volume Discount | 7.98 € *Unit price with basic configuration Volume Discount | 14.99 € *Unit price with basic configuration Volume Discount | 10.34 € *Unit price with basic configuration Volume Discount | 14.22 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
| Tightening Method | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| RoHS Information | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Specifications | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Features, Areas of Application | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| I.D.(mm) | 3 ～ 100 | 3 ～ 100 | 3 ～ 100 | - | 3 ～ 50 | 6 ～ 50 | - | - | - | 6.35 ～ 44.45 | 3 ～ 50 | 10 ～ 50 | 8 ～ 60 | - | - | 3 ～ 100 | 6.35 ～ 44.45 | 3 ～ 100 | - | 6+0.05 ～ 50+0.12 | 6+0.05 ～ 50+0.12 | 6+0.05 ～ 50+0.12 | 6+0.05 ～ 50+0.12 | 3 ～ 50 | 3 ～ 100 | 3 ～ 50 | 3 ～ 100 | 3 ～ 100 | - | - | 20* ～ 90 | 20* ～ 90 | 8 ～ 60 | 8 ～ 60 | 10 ～ 50 | - | - | - | - | - | - | 8 ～ 60 | - | - | - |
| O.D.(mm) | 7 ～ 140 | 16 ～ 140 | 16 ～ 140 | 25 ～ 60 | 16 ～ 78 | 38 ～ 100 | 25 ～ 60 | 25 ～ 60 | 25 ～ 60 | 18 ～ 73 | 16 ～ 78 | 28 ～ 82 | 18 ～ 88 | 28 ～ 82 | 16 ～ 54 | 16 ～ 140 | 18 ～ 73 | 7 ～ 140 | - | 16 ～ 78 | 16 ～ 78 | 16 ～ 78 | 16 ～ 78 | 16 ～ 78 | 16 ～ 140 | 16 ～ 78 | 16 ～ 140 | 16 ～ 140 | 16 ～ 54 | 16 ～ 54 | 40 ～ 125 | 40 ～ 125 | 18 ～ 88 | 18 ～ 88 | 28 ～ 82 | 28 ～ 82 | 28 ～ 82 | 28 ～ 82 | 28 ～ 82 | 28 ～ 82 | 28 ～ 82 | 18 ～ 88 | 28 ～ 82 | 28 ～ 82 | 28 ～ 82 |
| Width(mm) | 5 ～ 25 | 9 ～ 32 | 9 ～ 32 | 6 ～ 12 | 9 ～ 19 | 10 ～ 19 | 6 ～ 12 | 6 ～ 12 | 6 ～ 12 | 9 ～ 19 | 9 ～ 19 | 9 ～ 19 | 9 ～ 19 | 9 ～ 19 | 9 ～ 15 | 9 ～ 32 | 9 ～ 19 | 5 ～ 25 | - | 20 ～ 41 | 20 ～ 41 | 20 ～ 41 | 20 ～ 41 | 9 ～ 19 | 9 ～ 32 | 9 ～ 19 | 9 ～ 32 | 9 ～ 32 | 9 ～ 15 | 9 ～ 15 | 20 ～ 32 | 20 ～ 32 | 9 ～ 19 | 9 ～ 19 | 9 ～ 19 | 9 ～ 19 | 9 ～ 19 | 9 ～ 19 | 9 ～ 19 | 9 ～ 19 | 9 ～ 19 | 9 ～ 19 | 9 ～ 19 | 9 ～ 19 | 9 ～ 19 |
| Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Surface Treatment | No Surface Treatment | Zinc Plating | No Surface Treatment | No Surface Treatment | No Surface Treatment | Black Anodized | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | Surface Treatment Provided | No Surface Treatment | No Surface Treatment | Surface Treatment Provided | Surface Treatment Provided | Zinc Plating | No Surface Treatment | Surface Treatment Provided | No Surface Treatment | No Surface Treatment | Surface Treatment Provided | No Surface Treatment | Surface Treatment Provided | No Surface Treatment | Surface Treatment Provided | Surface Treatment Provided | No Surface Treatment | Surface Treatment Provided | No Surface Treatment | Surface Treatment Provided | No Surface Treatment | Surface Treatment Provided | Surface Treatment Provided | No Surface Treatment | Surface Treatment Provided | Surface Treatment Provided | No Surface Treatment | Surface Treatment Provided | No Surface Treatment | Surface Treatment Provided | No Surface Treatment | Surface Treatment Provided | No Surface Treatment | Surface Treatment Provided | No Surface Treatment |
| Thickness | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Side Surface Machining | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
RoHS Information
-
Specifications
-
Standard -
With Clamp Lever -
For Bearing Mounting -
With Urethane -
With Side Mounting Holes -
D Cut -
2-Flat -
Threaded Bore -
With Key Relief Groove
-
-
Features, Areas of Application
-
I.D.(mm)
- 3
- 4
- 5
- 6
- 6+0.05
- 6.35
- 7
- 7.938
- 8
- 8+0.07
- 9
- 9.525
- 10
- 10+0.07
- 10.5
- 11
- 11.113
- 12
- 12+0.07
- 12.7
- 13
- 13.8
- 14
- 15
- 15.875
- 16
- 16+0.07
- 17
- 17.3
- 18
- 19
- 19.05
- 20
- 20*
- 20+0.07
- 21
- 21.7
- 22
- 22.225
- 23
- 23.813
- 24
- 25
- 25+0.07
- 25.4
- 26
- 27
- 27.2
- 28
- 28.575
- 30
- 30+0.12
- 31.75
- 32
- 34
- 34.925
- 35
- 36
- 38
- 38.1
- 40
- 40+0.12
- 42
- 42.7
- 44.45
- 45
- 48
- 48.6
- 50
- 50+0.12
- 50.8
- 52
- 55
- 56
- 57.15
- 58
- 60
- 63
- 63.5
- 65
- 68
- 70
- 72
- 75
- 76.2
- 80
- 85
- 90
- 100
- 110
- 120
- 125
- 130
- 140
-
O.D.(mm)
- 7
- 8
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 17.2
- 18
- 18*
- 18.7
- 19
- 20
- 21.7
- 22
- 23
- 24
- 24.2
- 25
- 26
- 27
- 28
- 29
- 29.2
- 30
- 31
- 32
- 33
- 33.2
- 34
- 34.5
- 35
- 35.5
- 36
- 38
- 39
- 40
- 40.2
- 41
- 42
- 43
- 44
- 45
- 46
- 46.2
- 47
- 48
- 49
- 50
- 51
- 51.5
- 52
- 52.2
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 62
- 63
- 64
- 65
- 65.4
- 66
- 66.5
- 68
- 69
- 70
- 72
- 73
- 75
- 76
- 78
- 79
- 79.5
- 80
- 81
- 82
- 83
- 85
- 86
- 88
- 90
- 93
- 94
- 95
- 98
- 100
- 103
- 105
- 108
- 110
- 113
- 115
- 119
- 125
- 126
- 130
- 140
- 150
- 160
- 170
- 180
- 200
-
Width(mm)
-
Material
- Steel
- Stainless Steel
- Aluminum
- Resin
-
Surface Treatment
-
Thickness
-
Side Surface Machining
Narrow search by specifying Brand
-
- MISUMI (38)
- ESCO (74)
- MAEDLER (66)
- IWATA MFG (55)
- GANTER (19)
- NORELEM (18)
- KIPP (15)
- KATAYAMA CHAIN (8)
- KONISHI MFG (6)
- KBK (4)
- ELESA (3)
- HALDER (3)
- REYHER (2)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Narrow search by specifying lead time
-
- All
- Same day
- 2 Days or Less
- 3 Days or Less
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
Examples how you can use these components Test
Categories related to Set Collars / Clamping Rings
Metoda płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.