LOBTEX Diamond Cutters（Wheel Type：Segment Type）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Diamond Wheel Laser Corner Cutter (Dry Type)
LOBTEX
[Features]
· For corner cutting and cutting concrete, blocks, etc.
· The offset shape prevents the flange of power tools from making contact, enabling the corner between the wall of concrete blocks and floor surface to be cut, achieving a quick and beautiful finish.- Volume Discount
Starting from∗ ： 96.98 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
PVC Diamond Cutter (Dry)
LOBTEX
[Features]
· Cutting, chamfering, and surface finishing of PVC pipes.
· For cutting asbestos dual-layer pipe, cross-linked polyethylene pipe, void pipe, cast iron pipe, drainage mass adjuster kitchen panels.
· Superb sharpness with small to large bore pipes, leaving no flashes or burrs.- Volume Discount
Starting from∗ ： 82.22 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Diamond Wheel New Laser (Dry Type)
LOBTEX
New Laser SL-A, further advanced high performance. Further pursued performance improvements and excellent cost effectiveness of our best-selling model, Laser SL. Further pursued "sharpness + long life and safety". Achieves maximum performance.- Volume Discount
Starting from∗ ： 90.51 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Diamond Wheel U Cutter (Dry Type) / U Cutter Light (Dry Type)
LOBTEX
[Features]
· Ideal for repairing cracks in concrete and mortar.
· Since the grinding cross section is an ideal U shape, caulking materials easily fill grooves, and large adhesive surfaces ensure secure renovation work involving repairing of cracks that occur on concrete or mortar of wall surfaces and roof tops, etc., or for implementing joints.
· Every nook of the most complicated cracks in walls can be cut as needed without damaging other areas.
· The UK is a cost performance-focused type.Starting from∗ ： 191.67 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Diamond Wheel V Cutter (Dry Type) / V Cutter Light (Dry Type)
LOBTEX
[Features]
· Ideal for repairing cracks in concrete and mortar.
· Because the tip is tapered in a V shape, it is easy to cut into cracks, and even with complicated cracks it is possible to easily cut every corner of the wall without extra damage, so remodeling work can be drastically shortened.
· The VK is a cost performance-focused type.Starting from∗ ： 170.56 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Diamond Wheel Cut Off (Dry Type)
LOBTEX
Protective tip prevents abrasion of the substrate. For cutting hard concrete, concrete secondary products, hard porcelain tiles, bricks, stones (granite), blocks, slates, and roof tiles.- Volume Discount
Starting from∗ ： 75.41 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Diamond Wheel Laser (Dry Type)
LOBTEX
[Features]
· For cutting concrete, secondary concrete products, block, slate, ALC, stone, etc.
· Since this product maintains its strength even at high temperatures, it allows for safe work by reducing the amount of chipping that flies off during the extreme heat produced by difficult-to-cut machining.
· As it bonds instantaneously, it causes little thermal effects on the tip and substrates. It fully utilizes the sharpness of diamond abrasive grains and shows outstanding sharpness- Volume Discount
Starting from∗ ： 96.98 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Diamond Wheel Laser Blade (Dry Type)
LOBTEX
[Features]
· Value type with an emphasis on economy.
· Laser welding.
· For hand type engine cutters.
· For cutting and disassembling concrete, secondary concrete products, block, slate, ALC, stone, etc.
· The tips have been safely bonded by laser welding.
· Outstanding cutting quality too- Volume Discount
Starting from∗ ： 160.09 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Diamond Wheel Sword TRX (Dry Type)
LOBTEX
[Features]
· For cutting concrete products, blocks, slate, mortar, bricks, roof tiles, tiles, etc.
· Increased cutting speed.
· Light sharpness and excellent cost performance.- Volume Discount
Starting from∗ ： 84.56 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Diamond Wheel Kittaro (Dry Type)
LOBTEX
Pricing and performance are a cut above. New series of diamond cutters.
[Features]
· This price for the LOBSTER brand.
· Good cost performance with excellent cutting quality.
[Applications]
· Optimal for cutting all types of concrete products, blocks, slate, mortar, bricks, roof tiles, tiles, etc.- Volume Discount
Starting from∗ ： 32.74 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Diamond Wheel SETSUDANOU WA / SA (Dry Type)
LOBTEX
For cutting concrete products, blocks, slate, mortar, bricks, tiles, etc. Excellent cost effectiveness and wide variety of choices.- Volume Discount
Starting from∗ ： 47.88 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Diamond Blade for Civil Engineering (Wet Type)
LOBTEX
Diamond woodworking blade is a high-quality blade that is to be installed on concrete cutters etc. and it is suitable for wet-type devices.Starting from∗ ： 251.59 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Diamond Wheel with Electrodeposition (for Ceramic Siding Only)
LOBTEX
[Features]
· Unique electrodeposition method achieves gapless electrodeposition of diamond particles for a smooth cut.
· An extremely thin type with little cutting resistance and greatly improved operability.
· Further reduces dust and improves the working environment.
· Multi-segment type with excellent heat dissipation to enable continuous cutting.
· For dedicated ceramics use, but can be used to cut the following materials.
· Hard and brittle materials such as marble and slate, and resin materials such as FRP, CFRP, polyester resin, phenol resin, melamine resin, epoxy resin and hard PVC- Volume Discount
Starting from∗ ： 80.96 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Welding Diamond Wheel (Dry Type)
LOBTEX
[Features]
· For cutting cast iron tubes, casting, resin materials, rubber, tires, etc.
· 105-305 protect the substrate near protection chip, improve straightness, and result in a beautifully finished cut.
· The 355 separates base plates for increased rigidity and helps prevent run-out/deflection during cutting.
· Resinoid grindstone achieves a "longer life with less dust, smell, and sparks". A "work-friendly product" providing effortless replacement.
· When it comes to cutting of cast metals, ductile cast iron pipes, or powder-coated ductile cast iron pipes, sharpness and life are significantly improved compared to electrodeposition products.- Volume Discount
Starting from∗ ： 79.92 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Diamond Cutter Wheel (Dry Type) Single Cup
LOBTEX
Diamond cup wheel has a high density of diamond abrasive grains and demonstrates excellent workability during chamfering, such as grinding concrete blocks, bricks, tiles, stones, and refractory furnace materials for various construction work.- Volume Discount
Starting from∗ ： 93.94 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Diamond Cutter Wheel (Dry Type) Double Cup
LOBTEX
Diamond cup wheel has a high density of diamond abrasive grains and demonstrates excellent workability during chamfering, such as grinding concrete blocks, bricks, tiles, stones, and refractory furnace materials for various construction work.
[Features]
· High class product having excellent balance of sharpness and life.
· For stone, concrete, block and refractory brick- Volume Discount
Starting from∗ ： 108.96 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Diamond Wheel Laser SL (Dry Type)
LOBTEX
[Features]
· Because high strength is maintained even at high temperatures, work can be performed safely with minimal chip scatter.
· Demonstrates excellent cutting quality with instant bonding that fully retains the diamond granule cutting quality.
[Applications]
· For cutting concrete, secondary concrete products (e.g., U-shaped grooves), block, slate, ALC, stone, etc.Starting from∗ ： 368.05 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Diamond Wheel New Laser (Dry Type)
LOBTEX
[Features]
· Further increases the performance of conventional products and pursues a high cost performance.
· SL255A and above use a noise reduction baseplate.
· Further pursues cutting quality + long life and safety.
[Applications]
· For cutting hard concrete and secondary concrete products, stone materials, ALC, mortar, bricks, etc.- Volume Discount
Starting from∗ ： 403.64 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Product Type |
| Wheel Type |
| Specifications |
| Application |
| Outer Diameter(mm) |
| Blade thickness(mm) |
| Hole Diameter(mm) |
| Tip Height(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX | LOBTEX |
| Product Series | Diamond Wheel U Cutter (Dry Type) / U Cutter Light (Dry Type) | Diamond Wheel V Cutter (Dry Type) / V Cutter Light (Dry Type) | Diamond Wheel with Electrodeposition (for Ceramic Siding Only) | |||||||||||||||
| Starting from∗ | 96.98 € *Unit price with basic configuration Volume Discount | 82.22 € *Unit price with basic configuration Volume Discount | 90.51 € *Unit price with basic configuration Volume Discount | 191.67 € *Unit price with basic configuration | 170.56 € *Unit price with basic configuration | 75.41 € *Unit price with basic configuration Volume Discount | 96.98 € *Unit price with basic configuration Volume Discount | 160.09 € *Unit price with basic configuration Volume Discount | 84.56 € *Unit price with basic configuration Volume Discount | 32.74 € *Unit price with basic configuration Volume Discount | 47.88 € *Unit price with basic configuration Volume Discount | 251.59 € *Unit price with basic configuration | 80.96 € *Unit price with basic configuration Volume Discount | 79.92 € *Unit price with basic configuration Volume Discount | 93.94 € *Unit price with basic configuration Volume Discount | 108.96 € *Unit price with basic configuration Volume Discount | 368.05 € *Unit price with basic configuration | 403.64 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 8 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 6 Days | 6 Days |
| Product Type | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter | Diamond cutter |
| Wheel Type | Segment Type | Segment Type | Segment Type | Segment Type | Segment Type | Segment Type | Segment Type | Segment Type | Segment Type | Segment Type | Segment Type | Segment Type | Segment Type | Segment Type | Segment Type | Segment Type | Segment Type | Segment Type |
| Specifications | Dry Type | Dry Type | Dry Type | Dry Type | Dry Type | Dry Type | Dry Type | Dry Type | Dry Type | Dry Type | Dry Type | Wet type | - | Dry Type | Dry Type | Dry Type | Dry Type | Dry Type |
| Application | For concrete, mortar | - | For concrete, mortar / Stone Material | For concrete, mortar | For concrete, mortar | For concrete, mortar / Stone Material / Tile | For concrete, mortar / Stone Material | For concrete, mortar | For concrete, mortar / Tile | For concrete, mortar | For concrete, mortar / Tile | For concrete, mortar | Stone Material / Resin | Iron / Resin | For concrete, mortar / Stone Material / Tile | For concrete, mortar / Stone Material / Tile | For concrete, mortar / Stone Material | For concrete, mortar / Stone Material |
| Outer Diameter(mm) | 105 ～ 126 | 105 ～ 125 | 105 ～ 355 | 105 | 108 | 105 ～ 125 | 105 ～ 304 | 255 ～ 355 | 105 ～ 203 | 105 ～ 305 | 105 ～ 205 | 255 ～ 418 | 80 ～ 180 | 106 ～ 128 | 98 ～ 125 | 98 ～ 125 | 304 | 355 |
| Blade thickness(mm) | 2.3 | 1.7 | 2 ～ 3.2 | 10 | 10 | 1.8 | 2 ～ 2.5 | 2.4 ～ 3.2 | 1.8 ～ 2 | - | 1.8 ～ 2.2 | 2.5 ～ 3.2 | 0.6 ～ 1 | - | 4.5 | 4.5 | 2.5 | 3.2 |
| Hole Diameter(mm) | 20 ～ 22 | 20 ～ 22 | 20 ～ 30.5 | 20 | 20 | 20 ～ 22 | 20 ～ 30.5 | 20 ～ 30.5 | 20 ～ 25.4 | 20 ～ 30.5 | 20 ～ 25.4 | 22 ～ 27 | 20 | 20 ～ 22 | 15 ～ 22 | 15 ～ 22 | 25.4 | 30.5 |
| Tip Height(mm) | - | - | - | - | - | - | - | - | - | - | - | 6 ～ 7 | - | - | - | - | 7.5 | 7 |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Product Type
- Diamond cutter
- Polyvinyl chloride tube internal surface cutter
-
Wheel Type
- Segment Type
- Wave Type
- Rim Type
-
Specifications
- Dry Type
- Wet type
- Dry and Dry-Wet Type
-
Application
- Iron
- Non-ferrous
- For concrete, mortar
- Stone Material
- Tile
- Resin
-
Outer Diameter(mm)
-
Blade thickness(mm)
-
Hole Diameter(mm)
-
Tip Height(mm)
Narrow search by specifying Brand
-
- LOBTEX (18)
- SANKYO DIAMOND INDUSTRIAL (5)
- SAINT-GOBAIN (5)
- ASAHI DIAMOND INDUSTRIAL (4)
- IWOOD (3)
- MOTOYUKI (3)
- RESITON (3)
- RIKEN DIAMOND INDUSTRY (2)
- ARC GREATTOOL (1)
- EARTH MAN (1)
- GOEI (1)
- TSUBOMAN (1)
- TRUSCO NAKAYAMA (1)
- NORITAKE (0)
- DREMEL (0)
- WAKITA (0)
- TAKEKAWA (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Diamond Cutters
Metoda płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.