GANTER Knurled Nuts

Quick release knurled nuts GN 6303.1 are used in such applications where the nut has to be completely removed after the releasing operation and re-fitted rapidly for re-clamping.The nut is tilted over the threaded spindle. When in position, the nut is brought into a straight position for meshing of the two threads on nut and spindle. The nut will then have to be turned only by a fraction of a rotation to achieve clamping.Functional safety exists only if the clamping surface lies at a right angle to the threaded bolt.

[Specifications]・Thread d1: M4-M10・Standard: DIN 466[Features]・Steel: Tensile strength class 5 ( 500 N / mm ), visible face fine turned, blackened・Stainless Steel AISI 303: matt shot-blasted

The dowel bore d5 in the DIN 6303 Stainless Steel knurled nut is designed for the use of clamping or notch pins.Knurled nuts DIN 6303 with H7 bore and the size M12 are not provided on the official standard sheet

Flat knurled nuts, Stainless Steel

Knurled nuts with Steel insert

Knurled nuts with Stainless Steel bushing

[Specifications]・Thread d1: M3-M12・Standard: DIN 466[Features]・Steel: Tensile strength class 5 ( 500 N / mm ), visible face fine turned, blackened・Stainless Steel Alsi 303: matt shot-blasted DIN 466

[Specifications]・Material: NG. Stainless SteelStainless steel adjusting screws GN 827 are used in combination with bearing blocks GN 828 for simple adjustment and positioning tasks.

The dowel bore d5 in the DIN 6303 knurled nut is designed for the use of clamping or notch pins.DIN 6303 knurled nuts with H7 bore and the size M12 are not provided on the official standard sheet.

The official standard sheet also provides for the sizes M1 / M1,2 / M1,4 / M1,6 / M2 and M2,5, on the other hand lack the size M12.

[Specifications]・Material: NG. Stainless SteelStainless steel knurled nuts GN 827.1 are used with stainless steel adiusting screws GN 827 to secure settings and positions in place by counterlocking.