Rejestracja

Tłumaczymy nasz sklep na język polski!

Wymaga to jednak czasu, ponieważ w ofercie mamy dużo artykułów, a na nasz sklep składa się wiele stron. Chwilowo nasz katalog produktów dostępny będzie w języku angielskim. Dziękujemy za cierpliwość!
Warunki filtrowania

Wyczyść wszystko

  • Stan magazynowy
  • Main Body Type
  • Mounting Section Type
  • Mounting Section Diameter d(mm) and/or Diameter
  • Mounting Section Length L(mm)
  • Round Type Category
  • Male Tip Machining
  • Producent
  • CAD
  • GANTER Clamping Knobs

    • Star knobs with movable thrust pad
      • ZNIŻKA
      • Volume Discount

      GANTER

      Star knobs with movable thrust pad

      Star knobs GN 6336.12 have a ball pin whose diameter is smaller than the core diameter of the thread.The movable thrust pad is easily clipped on and taken off.The thrust pads are supplied unmounted.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      -----25 ~ 55---
      Cena (bez VAT) od:
      3.08 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Knurled screws, Stainless Steel
      • Volume Discount

      GANTER

      Knurled screws, Stainless Steel

      All Stainless Steel-Knurled screws DIN 464 are machined from solid bar.Unlike in the official standard sheet, they are generally made with thread right up to the head and without recess groove at the end of the thread.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      ---------
      Cena (bez VAT) od:
      2.68 €
      Cena zawiera VAT:
      3.19 €
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Star Knobs with Loss Protection / GN 6336.13
      • ZNIŻKA
      • Volume Discount

      GANTER

      Star Knobs with Loss Protection / GN 6336.13

      Star knobs GN 6336.13 can be captive-attached to a base element with the help of a ball chain or a retaining cable.The star knobs are supplied ready assembled (with retaining ring and ball chain or retaining cable).
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      -----10 ~ 50---
      Cena (bez VAT) od:
      4.56 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Star knobs with loss protection
      • ZNIŻKA
      • Volume Discount

      GANTER

      Star knobs with loss protection

      Star knobs GN 6336.13 can be captive-attached to a base element with the help of a ball chain or a retaining cable.The star knobs are supplied ready assembled (with retaining ring and ball chain or retaining cable).
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      ---------
      Cena (bez VAT) od:
      6.30 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Star knobs, plastic, threaded bolt Stainless Steel
      • ZNIŻKA
      • Volume Discount

      GANTER

      Star knobs, plastic, threaded bolt Stainless Steel

      Star knobs GN 6336.5 comply with DIN 6336 type L.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      ----M 6 ~ M 1210 ~ 55---
      Cena (bez VAT) od:
      1.32 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Star knobs, plastic, with threaded bolt steel
      • ZNIŻKA
      • Volume Discount

      GANTER

      Star knobs, plastic, with threaded bolt steel

      Star knobs GN 6336.4 comply with DIN 6336 type L.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      -----10 ~ 70---
      Cena (bez VAT) od:
      0.76 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Knurled screws, Steel / Stainless Steel
      • ZNIŻKA
      • Volume Discount

      GANTER

      Knurled screws, Steel / Stainless Steel

      Knurled screws DIN 464 are machined from solid bar.Unlike in the official standard sheet, they are generally made with thread right up to the head and without recess groove at the end of the thread.The official standard sheet also provides for the sizes M1 / M1,2 / M1,6 / M2 and M2,5.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      Round shape-Male thread (stepped)-M2 ~ M104 ~ 40CylindricalKnurled-
      Cena (bez VAT) od:
      1.10 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Waist shaped knobs, Steel
      • Volume Discount

      GANTER

      Waist shaped knobs, Steel

      Waist shaped knobs GN 75 boast a compact and timeless design.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      ---------
      Cena (bez VAT) od:
      3.62 €
      Cena zawiera VAT:
      4.31 €
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Quick release star knobs, Plastic
      • Volume Discount

      GANTER

      Quick release star knobs, Plastic

      Quick release star knobs GN 6336.3 are used in such applications where the knob has to be completely removed after the releasing operation and refitted rapidly for re-clamping.The knob is tilted over the threaded spindle. When in position, the knob is brought into a straight position for meshing of the two threads on nut and spindle. The knob will then have to be turned only by fraction of a rotation to achieve clamping.Functional safety exists only if the clamping surface lies at a right angle to the threaded bolt.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      ---------
      Cena (bez VAT) od:
      6.28 €
      Cena zawiera VAT:
      7.47 €
      Standardowa data wysyłki:
      3 dni robocze
      Konfiguruj
    • Star knobs with pivot
      • ZNIŻKA
      • Volume Discount

      GANTER

      Star knobs with pivot

      Star knobs GN 6336.10 with brass or plastic thrust pad are used when indentations or damage is to be avoided.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      -----10 ~ 55---
      Cena (bez VAT) od:
      2.70 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Torque Limiting Knob Screws / GN 3663
      • ZNIŻKA
      • Volume Discount

      GANTER

      Torque Limiting Knob Screws / GN 3663

      Torque limiting knob screws GN 3663 are used when the manually applied torque is to be limited.When turned clockwise, the torque mechanical system of the knurled knob triggers an „over-engagement“ as soon as the specified torque is reached. When turning anti-clockwise, the mechanical system locks such that the torque is not limited. When tightening, this will ensure that the maximum permissible torque is not exceeded. On the other hand, the torque necessary for releasing will always be transferred reliably.After removing the cover and loosening the countersunk screw, the thread or bore insert can be dismantled.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      ----M 4 ~ M 1212 ~ 63---
      Cena (bez VAT) od:
      58.58 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Quick release toggle nuts
      • Volume Discount

      GANTER

      Quick release toggle nuts

      Quick release toggle nuts GN 6305.1 are used in such applications where the knob has to be completely removed after the releasing operation and refitted rapidly for re-clamping.Plug the toggle nut onto the threaded bolt at an oblique angle. During the clamping action, it engages into the threads of the bolt.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      ---------
      Cena (bez VAT) od:
      19.20 €
      Cena zawiera VAT:
      22.85 €
      Standardowa data wysyłki:
      7 dni robocze
      Konfiguruj
    • Stainless Steel-Star knobs with threaded bolt AISI 304
      • ZNIŻKA
      • Volume Discount

      GANTER

      Stainless Steel-Star knobs with threaded bolt AISI 304

      The original ELESA design with 5 recess grips is typical for GN 5334 star knobs.This form gives these grips an appealing look and additionally allows a high torque to be achieved.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      -----20 ~ 50---
      Cena (bez VAT) od:
      11.94 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Stainless Steel-Star knobs, Casting only
      • Volume Discount

      GANTER

      Stainless Steel-Star knobs, Casting only

      Stainless Steel-Star knobs GN 5335 are a special development intended for the food processing machinery industry. The smooth and enclosed areas as well as the large corner radii comply with the requirements of hygiene standards.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      ---------
      Cena (bez VAT) od:
      17.86 €
      Cena zawiera VAT:
      21.25 €
      Standardowa data wysyłki:
      7 dni robocze
      Konfiguruj
    • Star knobs, Stainless Steel
      • ZNIŻKA
      • Volume Discount

      GANTER

      Star knobs, Stainless Steel

      Star knobs, Stainless Steel
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      ---------
      Cena (bez VAT) od:
      10.12 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Tommy screws, with movable bar
      • Volume Discount

      GANTER

      Tommy screws, with movable bar

      The thrust point of these screws DIN 6306 is designed to be used with or without the thrust pad for clamping.The snap ring is a simple and quick method to connect the thrust pad to the tommy screw.Instead of DIN 6311 a thrust pad GN 6311.1 can be used. In that case the tommy screw and the thrust pad have to be ordered separately.The movable bar of the tommy screw DIN 6306 is held in any position by the pressure spring.The end caps are pressed on to the bar and thus limit the bar travel, they can also be supplied separately should the bar be plated first.The official DIN standard sheets provides for steel rings at this point.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      -----40 ~ 90---
      Cena (bez VAT) od:
      18.00 €
      Cena zawiera VAT:
      21.42 €
      Standardowa data wysyłki:
      7 dni robocze
      Konfiguruj
    • Hand knobs, Aluminum with Stainless Steel-Threaded bolt
      • ZNIŻKA
      • Volume Discount

      GANTER

      Hand knobs, Aluminum with Stainless Steel-Threaded bolt

      Hand knobs, Aluminum with Stainless Steel-Threaded bolt
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      -----20 ~ 55---
      Cena (bez VAT) od:
      13.52 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Knurled screws, with pivot
      • ZNIŻKA
      • Volume Discount

      GANTER

      Knurled screws, with pivot

      Knurled screws GN 7336.5, type MS/KU with brass or plastic pivots are used when pressure dents or damage must be avoided. Knurled screws GN 7336.5, type ZK feature a spherical pivot whose Ø d6 is smaller than the core Ø of the thread. The version with spherical pivot is suitable for holding GN 631 / GN 631.5 thrust pads, which must be ordered separately.The knurled screws GN 7336.5 distinguish an attractive design in combination with closed shape (no recess on the underside of the handles).
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      ---------
      Cena (bez VAT) od:
      5.26 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Hand knobs, Aluminum
      • ZNIŻKA
      • Volume Discount

      GANTER

      Hand knobs, Aluminum

      Hand knobs, Aluminum
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      ---------
      Cena (bez VAT) od:
      7.36 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Hand knobs, Plastic
      • ZNIŻKA
      • Volume Discount

      GANTER

      Hand knobs, Plastic

      Hand knobs DIN 6335 with bore H7 are available as GN 6335.1.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      ---------
      Cena (bez VAT) od:
      0.80 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Torque Limiting Knobs / GN 3663
      • ZNIŻKA
      • Volume Discount

      GANTER

      Torque Limiting Knobs / GN 3663

      Torque limiting knobs GN 3663 are used when the manually applied torque is to be limited.When turned clockwise, the torque mechanical system of the knurled knob triggers an „over-engagement“ as soon as the specified torque is reached. When turning anti-clockwise, the mechanical system locks such that the torque is not limited. When tightening, this will ensure that the maximum permissible torque is not exceeded. On the other hand, the torque necessary for releasing will always be transferred reliably.After removing the cover and loosening the countersunk screw, the thread or bore insert can be dismantled.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      ----M 3 ~ M 12----
      Cena (bez VAT) od:
      58.48 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Hand knobs with threaded bushing in brass
      • ZNIŻKA
      • Volume Discount

      GANTER

      Hand knobs with threaded bushing in brass

      Hand knobs DIN 6335 with bore H7 are available as GN 6335.1.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      ---------
      Cena (bez VAT) od:
      0.92 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Hand knobs, Plastic, protruding steel bushing, threaded bolt
      • ZNIŻKA
      • Volume Discount

      GANTER

      Hand knobs, Plastic, protruding steel bushing, threaded bolt

      The hand knobs GN 6335.4 have an immaculate contact or clamping surface thanks to the protruding steel bushing.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      ----M 816 ~ 60---
      Cena (bez VAT) od:
      2.22 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Hand knobs, plastic, with threaded bolt, Steel
      • ZNIŻKA
      • Volume Discount

      GANTER

      Hand knobs, plastic, with threaded bolt, Steel

      Hand knobs GN 6335.4 comply with DIN 6335 type L.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      -----15 ~ 70---
      Cena (bez VAT) od:
      0.88 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Knurled nuts, Stainless steel
      • ZNIŻKA
      • Volume Discount

      GANTER

      Knurled nuts, Stainless steel

      The knurling of the Stainless steel-Knurled nuts GN 536 allows a use in an environment with hygienic requirements.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      ---------
      Cena (bez VAT) od:
      9.90 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Control knobs with adjustable spindle, Aluminium / Steel
      • Volume Discount

      GANTER

      Control knobs with adjustable spindle, Aluminium / Steel

      Control knobs with adjustable spindle GN 727 allow precise adjustment or aligning i. e. of a positive stop. The spindle thread is without backlash.The graduations on the control knob are non-abrasive and well legible, The light grey cover shrouds the fixing components as well as the shaft end.Regarding design, numbering run, numbering position and mubering sequence of the scale please see the layout for scale rings on the order sheet "How to order Graduations".
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      ---------
      Cena (bez VAT) od:
      90.80 €
      Cena zawiera VAT:
      108.05 €
      Standardowa data wysyłki:
      7 dni robocze
      Konfiguruj
    • Hand knobs, Plastic, protruding Stainless Steel bushing, Stainless Steel-Threade
      • ZNIŻKA
      • Volume Discount

      GANTER

      Hand knobs, Plastic, protruding Stainless Steel bushing, Stainless Steel-Threade

      The hand knobs have an immaculate contact or clamping surface thanks to the protruding Stainless Steel bushing.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      -----16 ~ 60---
      Cena (bez VAT) od:
      2.96 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Knobs, Stainless Steel
      • ZNIŻKA
      • Volume Discount

      GANTER

      Knobs, Stainless Steel

      Stainless Steel-Knobs GN 676.5 are used in applica-tions where a push or pull movement is required. Their concave top gives a more comfortable thumb grip.The knurled model (Type B) can be used as an attractively shaped knurled knob with a threaded blind hole.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      ---------
      Cena (bez VAT) od:
      7.78 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Knurled screws with recessed stud for loss prevention
      • ZNIŻKA
      • Volume Discount

      GANTER

      Knurled screws with recessed stud for loss prevention

      Knurled screws GN 653.2 can be used for to prevent loss of the thumb screw, due to the d4 recessed portion of the stud.When using, instead of a typical tapped and bore hole, it is necessary to provide tapped bores with a thread d1 on each of the two elements to be assembled. Additionally, a clearance bore of d5 on one or both sides must be cut.Depending on the design and required clamping length a1 ... a3 of the component being attached, there are a number of assembly options as shown above.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      -----15 ~ 42---
      Cena (bez VAT) od:
      2.12 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Stainless Steel-Star knobs, highly polished
      • Volume Discount

      GANTER

      Stainless Steel-Star knobs, highly polished

      Stainless Steel-Star knobs GN 5335 are a special development intended for the food processing machinery industry. The smooth and enclosed areas as well as the large corner radii comply with the requirements of hygiene standards.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      ---------
      Cena (bez VAT) od:
      26.16 €
      Cena zawiera VAT:
      31.13 €
      Standardowa data wysyłki:
      7 dni robocze
      Konfiguruj
    • Star knobs with ball pin
      • ZNIŻKA
      • Volume Discount

      GANTER

      Star knobs with ball pin

      Star knobs GN 6336.11 have a ball pin whose diameter is smaller than the core diameter of the thread.The thrust pads are supplied unmounted.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      -----25 ~ 55---
      Cena (bez VAT) od:
      2.06 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Star knobs with protruding Stainless Steel bushing
      • ZNIŻKA
      • Volume Discount

      GANTER

      Star knobs with protruding Stainless Steel bushing

      Star knobs GN 6336.1 with all Stainless Steel bushing (main dimensions of DIN 6336) have important advantages:The face of the bushing is exactly square to the bore and is with the complete diameter out of Stainless Steel. The protruding Stainless Steel bushing allows a perfect cross-dowels connection.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      ---------
      Cena (bez VAT) od:
      4.02 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Star knobs, Aluminum
      • Volume Discount

      GANTER

      Star knobs, Aluminum

      Star knobs GN 5336 are forged, therefore a close grain structure is maintained providing a high tensile strength and a smooth surface.Original ELESA design, now produced in metal in agreement with ELESA s.p.a.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      ---------
      Cena (bez VAT) od:
      6.76 €
      Cena zawiera VAT:
      8.04 €
      Standardowa data wysyłki:
      7 dni robocze
      Konfiguruj
    • Star knobs, Aluminum
      • ZNIŻKA
      • Volume Discount

      GANTER

      Star knobs, Aluminum

      Star knobs, Aluminum
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      ---------
      Cena (bez VAT) od:
      7.44 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Star knobs, Duroplast
      • ZNIŻKA
      • Volume Discount

      GANTER

      Star knobs, Duroplast

      Star knobs GN 6336.1 with bushing have important advantages:The face of the bushing is exactly square to the bore and is with the complete diameter out of steel. The protruding steel bushing allows a perfect cross-dowels connection.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      ---------
      Cena (bez VAT) od:
      2.00 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Star knobs, plastic, with protruding steel bushing, with threaded bolt steel
      • ZNIŻKA
      • Volume Discount

      GANTER

      Star knobs, plastic, with protruding steel bushing, with threaded bolt steel

      The star knobs have an immaculate contact or clamping surface thanks to the protruding steel bushing.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      ----M 5 ~ M 1210 ~ 60---
      Cena (bez VAT) od:
      0.76 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Torque limiting knobs
      • Volume Discount

      GANTER

      Torque limiting knobs

      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      ---------
      Cena (bez VAT) od:
      40.50 €
      Cena zawiera VAT:
      48.20 €
      Standardowa data wysyłki:
      7 dni robocze
      Konfiguruj
    • Control knobs, Aluminium, natural colour, anodized
      • Volume Discount

      GANTER

      Control knobs, Aluminium, natural colour, anodized

      Control knobs GN 723.4 can be combined with reference flanges GN 723.3 which offer the following advantages:- they are provided with a reference mark relating to the scale on the control knobs- they give additional support to the control shaft,- the version with a friction ring prevents unexpected movement through vibration.Scale and arrow on the control knobs are indelibly marked and easily legible.Besides the standard scale (Type S) they can be supplied with any type of graduation. Regarding design, numbering run, numbering position and numbering sequence of the scale please see the layout for scale knobs on the order sheet „How to order Graduations“
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      ---------
      Cena (bez VAT) od:
      26.56 €
      Cena zawiera VAT:
      31.61 €
      Standardowa data wysyłki:
      7 dni robocze
      Konfiguruj
    • Control knobs, Stainless Steel
      • ZNIŻKA
      • Volume Discount

      GANTER

      Control knobs, Stainless Steel

      Control knobs, Stainless Steel
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      ---------
      Cena (bez VAT) od:
      18.32 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Flat knurled screws with brass / plastic pivot
      • ZNIŻKA
      • Volume Discount

      GANTER

      Flat knurled screws with brass / plastic pivot

      Flat knurled screws GN 653.10 with pivot in brass or plastic are used in applications, where marks and damages on the workpiece are unacceptable.The head dimensions comply with flat knurled thumb screws DIN 653.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      ---------
      Cena (bez VAT) od:
      4.52 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Hand knobs, Duroplast, with protruding steel bushing
      • ZNIŻKA
      • Volume Discount

      GANTER

      Hand knobs, Duroplast, with protruding steel bushing

      Hand knobs GN 6335.1 with protruding steel bushing have important advantages:The face of the bushing is exactly square to the bore and is with the complete diameter out of steel. The protruding steel bushing allows a perfect cross-dowels connection.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      ---------
      Cena (bez VAT) od:
      2.22 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Hand knobs, Plastic, with Threaded bolt, Stainless Steel
      • ZNIŻKA
      • Volume Discount

      GANTER

      Hand knobs, Plastic, with Threaded bolt, Stainless Steel

      Star knobs GN 6335.5 comply with DIN 6335 type L.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      -----10 ~ 55---
      Cena (bez VAT) od:
      1.68 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Hand knobs, Technopolymer, with protruding Stainless Steel bushing
      • ZNIŻKA
      • Volume Discount

      GANTER

      Hand knobs, Technopolymer, with protruding Stainless Steel bushing

      Hand knobs GN 6335.2 with protruding Stainless Steel bushing have important advantages:The face of the bushing is exactly square to the bore and is with the complete diameter out of Stainless Steel. The protruding Stainless Steel bushing allows a perfect cross-dowels connection.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      ---------
      Cena (bez VAT) od:
      3.42 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Stainless Steel-Flat knurled screws with brass / plastic pivot
      • ZNIŻKA
      • Volume Discount

      GANTER

      Stainless Steel-Flat knurled screws with brass / plastic pivot

      Stainless Steel-Flat knurled screws GN 653.10 with pivot in brass or plastic are used in applications, where marks and damages on the workpiece are unacceptable.The head dimensions comply with flat knurled thumb screws DIN 653.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      ---------
      Cena (bez VAT) od:
      6.44 €
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • Stainless Steel-Indexing mechanisms
      • Volume Discount

      GANTER

      Stainless Steel-Indexing mechanisms

      Stainless Steel-Indexing mechanisms GN 200 replace and simplify complicated indexing and safety mechanisms.Besides the standard scale (Type AS) the control knob version may be supplied with any scale.Regarding design, numbering run, numbering position and numbering sequence of the scale please see the layout for scale rings on the order sheet „How to order Graduations“.
      Czytaj dalej
      Main Body TypeEnvironmentally FriendlyMounting Section TypeProperties / applicationsMounting Section Diameter d(mm) and/or DiameterMounting Section Length L(mm)Round Type CategorySide MachiningPolygon, type
      ---------
      Cena (bez VAT) od:
      123.10 €
      Cena zawiera VAT:
      146.49 €
      Standardowa data wysyłki:
      7 dni robocze
      Konfiguruj