CONCAR Toothed Belt Pulleys / Timing Pulleys / Idlers
Narrow search by specifying Type
-
Timing pulley -
Timing Pulley Bar Stock -
Surface Pressure Pulley -
Idlers with Teeth -
Idler -
Flange
?* Information on days to ship and prices
-
Timing belt pulleys / 5M / with flanged pulley / aluminium, steel / SGT
CONCAR
[Specifications]
・Division(mm): 5
V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys / 5M / with flanged pulley / aluminium, steel / SGTStarting from∗ ： 7.26 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Timing belt pulleys / AT5 / with flanged pulley / aluminium / SGJ
CONCAR
[Specifications]
・Material: Aluminum
・Division(mm): 5
Timing belt pulleys / AT5 / with flanged pulley / SGJStarting from∗ ： 6.00 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Timing belt pulleys for TaperLock / 5M / steel / SGTTB
CONCAR
[Specifications]
・Material: Steel
・Belt Width Used(mm): 15
・Division(mm): 14
V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys for TaperLock / 5M / SGTTBStarting from∗ ： 19.98 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Timing belt pulleys / 8M / with flanged pulley / steel, grey cast iron / PCS
CONCAR
[Specifications]
・Division(mm): 8
Poly Chain GT2 runs in special Poly Chain GT timing belt pulleys.
Timing belt pulleys / 8M / with flanged pulley / steel, grey cast iron / PCSStarting from∗ ： 45.46 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Timing belt pulleys / 3M / with flanged pulley / aluminium / SGS
CONCAR
[Specifications]
・Material: Aluminum
・Division(mm): 3
V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys / 3M / with flanged pulley / SGSStarting from∗ ： 6.91 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Timing belt pulleys / H / with flanged pulley / steel, grey cast iron / SGD
CONCAR
[Specifications]
・Division(mm): 12.7
V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys / H / with flanged pulley / steel, grey cast iron / SGDStarting from∗ ： 9.08 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Timing belt pulleys / AT10 / with flanged pulley / aluminium / SGK
CONCAR
[Specifications]
・Material: Aluminum
・Division(mm): 10
V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
・Timing belt pulleys / AT10 / with flanged pulley / aluminium / SGKStarting from∗ ： 14.91 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Timing belt pulleys / 14M / with flanged pulley / steel, grey cast iron / SGV
CONCAR
[Specifications]
・Division(mm): 14
V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys / 14M / with flanged pulley / steel, grey cast iron / SGVStarting from∗ ： 64.34 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Timing belt pulleys for TaperLock / 14M / steel, grey cast iron / SGVTB
CONCAR
[Specifications]
・Division(mm): 14
V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys for TaperLock / 14M / steel, grey cast iron / SGVTBStarting from∗ ： 80.34 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Timing belt pulleys for TaperLock / 8M / steel, grey cast iron / SGUTB
CONCAR
[Specifications]
・Division(mm): 8
V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys for TaperLock / 8M / steel, grey cast iron / SGUTBStarting from∗ ： 24.35 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Timing belt pulleys for TaperLock / 14M / steel, cast iron / PCGT
CONCAR
[Specifications]
・Division(mm): 14
Poly Chain GT2 runs in special Poly Chain GT timing belt pulleys.
Timing belt pulleys for TaperLock / 14M / steel, cast iron / PCGTStarting from∗ ： 174.34 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Timing belt pulleys / T10 / with flanged pulley / aluminium / SGI
CONCAR
[Specifications]
・Material: Aluminum
・Division(mm): 10
V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys / T10 / with flanged pulley / SGIStarting from∗ ： 11.98 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Timing belt pulleys / 3M / with flanged pulley / steel, grey cast iron / SGU
CONCAR
[Specifications]
・Division(mm): 8
V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys / 3M / with flanged pulley / steel, grey cast iron / SGUStarting from∗ ： 14.54 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Timing belt pulleys / T5 / with flanged pulley / aluminium / SGH
CONCAR
[Specifications]
・Material: Aluminum
・Division(mm): 5
V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys / T5 / with flanged pulley / SGHStarting from∗ ： 8.00 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Timing belt pulleys / L / with flanged pulley / steel, grey cast iron / SGC
CONCAR
[Specifications]
・Division(mm): 9.525
V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys / L / with flanged pulley / steel, grey cast iron / SGCStarting from∗ ： 7.63 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Timing belt pulleys / MXL / with flanged pulley / aluminium / SGA
CONCAR
[Specifications]
・Material: Aluminum
・Belt Width Used(mm): 6.35
・Division(mm): 2.032
V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys / MXL / with flanged pulley / SGAStarting from∗ ： 11.98 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Timing belt pulleys / XL / with flanged pulley / steel, grey cast iron / SGB
CONCAR
[Specifications]
・Belt Width Used(mm): 9.53
・Division(mm): 5.08
V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys / XL / with flanged pulley / steel, grey cast iron / SGBStarting from∗ ： 6.91 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Timing belt pulleys / H / steel, grey cast iron / SGDTB
CONCAR
[Specifications]
・Division(mm): 12.7
V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys / H / steel, grey cast iron / SGDTBStarting from∗ ： 11.26 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Timing belt pulleys / T2.5 / with flanged pulley / aluminium / SGG
CONCAR
[Specifications]
・Material: Aluminum
・Belt Width Used(mm): 4 and 6
・Division(mm): 2.5
V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys / T2.5 / with flanged pulley / SGGStarting from∗ ： 7.58 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Timing belt pulleys / L / steel, grey cast iron / SGCTB
CONCAR
[Specifications]
・Division(mm): 9.525
V-belts transfer the drive power via a form fit on the V-belt pulley. In contrast to the V-belt drive, this is a synchronous power transfer. A differentiation is made between V-belt pulleys for finished boreholes and V-belt pulleys for taper bushes. They are available in metric and imperial partitions. Depending on the profile and the pulley diameter, this pulley type is available in steel (C45), grey cast iron (EN-GJL-200) or aluminium.
Timing belt pulleys / L / steel, grey cast iron / SGCTBStarting from∗ ： 8.00 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Type |
| Belt-shaped |
| Belt Width Used(mm) |
| Operating belt width(Inch) |
| The Number of Teeth |
| Pulley Shape |
| Material |
| Surface Treatment |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | CONCAR | CONCAR | CONCAR | CONCAR | CONCAR | CONCAR | CONCAR | CONCAR | CONCAR | CONCAR | CONCAR | CONCAR | CONCAR | CONCAR | CONCAR | CONCAR | CONCAR | CONCAR | CONCAR | CONCAR |
| Product Series | Timing belt pulleys / 5M / with flanged pulley / aluminium, steel / SGT | Timing belt pulleys / AT5 / with flanged pulley / aluminium / SGJ | Timing belt pulleys / 8M / with flanged pulley / steel, grey cast iron / PCS | Timing belt pulleys / 3M / with flanged pulley / aluminium / SGS | Timing belt pulleys / H / with flanged pulley / steel, grey cast iron / SGD | Timing belt pulleys / AT10 / with flanged pulley / aluminium / SGK | Timing belt pulleys / 14M / with flanged pulley / steel, grey cast iron / SGV | Timing belt pulleys for TaperLock / 14M / steel, grey cast iron / SGVTB | Timing belt pulleys for TaperLock / 8M / steel, grey cast iron / SGUTB | Timing belt pulleys for TaperLock / 14M / steel, cast iron / PCGT | Timing belt pulleys / T10 / with flanged pulley / aluminium / SGI | Timing belt pulleys / 3M / with flanged pulley / steel, grey cast iron / SGU | Timing belt pulleys / T5 / with flanged pulley / aluminium / SGH | Timing belt pulleys / L / with flanged pulley / steel, grey cast iron / SGC | Timing belt pulleys / MXL / with flanged pulley / aluminium / SGA | Timing belt pulleys / XL / with flanged pulley / steel, grey cast iron / SGB | Timing belt pulleys / T2.5 / with flanged pulley / aluminium / SGG | |||
| Starting from∗ | 7.26 € *Unit price with basic configuration | 6.00 € *Unit price with basic configuration | 19.98 € *Unit price with basic configuration | 45.46 € *Unit price with basic configuration | 6.91 € *Unit price with basic configuration | 9.08 € *Unit price with basic configuration | 14.91 € *Unit price with basic configuration | 64.34 € *Unit price with basic configuration | 80.34 € *Unit price with basic configuration | 24.35 € *Unit price with basic configuration | 174.34 € *Unit price with basic configuration | 11.98 € *Unit price with basic configuration | 14.54 € *Unit price with basic configuration | 8.00 € *Unit price with basic configuration | 7.63 € *Unit price with basic configuration | 11.98 € *Unit price with basic configuration | 6.91 € *Unit price with basic configuration | 11.26 € *Unit price with basic configuration | 7.58 € *Unit price with basic configuration | 8.00 € *Unit price with basic configuration |
| Min. Shipping Days ： | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days |
| Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Belt-shaped | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Belt Width Used(mm) | 9 ～ 25 | 10 ～ 25 | 15 | 12 ～ 62 | 6 ～ 15 | 19.05 ～ 76.2 | 16 ～ 50 | 40 ～ 115 | 40 ～ 115 | 20 ～ 85 | 20 ～ 125 | 16 ～ 50 | 20 ～ 85 | 10 ～ 25 | 12.7 ～ 25.4 | 6.35 | 9.53 | 25.4 ～ 76.2 | 4 and 6 | 12.7 ～ 25.4 |
| Operating belt width(Inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| The Number of Teeth | 12 ～ 72 | 12 ～ 60 | 34 ～ 136 | 22 ～ 192 | 10 ～ 72 | 14 ～ 120 | 12 ～ 60 | 28 ～ 144 | 28 ～ 192 | 22 ～ 192 | 28 ～ 192 | 12 ～ 60 | 18 ～ 192 | 10 ～ 60 | 10 ～ 120 | 16 ～ 72 | 10 ～ 72 | 16 ～ 120 | 12 ～ 60 | 18 ～ 120 |
| Pulley Shape | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Surface Treatment | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Belt-shaped
-
Belt Width Used(mm)
-
Operating belt width(Inch)
-
The Number of Teeth
-
Pulley Shape
-
Material
- Steel
- Aluminum
- Stainless Steel
- Resin
-
Surface Treatment
Narrow search by specifying Brand
-
- MISUMI (54)
- MITSUBOSHI BELTING (27)
- CONCAR (20)
- NORELEM (17)
- KATAYAMA CHAIN (11)
- UNITTA (11)
- NABEYA BI-TECH (5)
- BANDO (3)
- MAEDLER (3)
- KANEMITSU (2)
- GATES (1)
- KONISHI MFG (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Narrow search by specifying lead time
-
- All
- Same day
- 3 Days or Less
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 11 Days or Less
Examples how you can use these components Test
Categories related to Toothed Belt Pulleys / Timing Pulleys / Idlers
Metoda płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.