ASAHI SEIKO Pillow Type
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Promotional pricing ends 30/11/2024
Pillow Unit with Set Screws, Cylindrical Hole Shape, UCP
ASAHI SEIKO
Standard model number. Bearing box with a sturdy integrated structure and inserted bearing. Used with a wide range of transmission equipment. Cast iron series
[Features]
· Logical steel center: The outer wheel's outer diameter is machined into a ball surface, fitting around the center of a bearing box machined in the same way. Because both of the spherical surfaces can be aligned, this ensures logical operation of the machinery and stops erratic shaft center behavior, preventing excessive force from being applied to the bearing due to complications.
· Supply method: Simply supply fresh grease at arbitrary intervals and ensure that the bearing internal workings are ejecting old grease to the exterior as much as possible to extend working life for both grease supplies and the bearing. The cast iron series comes standard with a supply method to ensure that it can be used in severe conditions for long periods of time with complete confidence.
· Excellent sealing equipment: The bearing is double-sealed with a steel plate slinger and a heat-resistant synthetic rubber seal. Friction is low and even if the shaft tilts the seal contact is unchanged. The result is an extremely effective seal that prevents both grease leaks and contamination of the interior by external trash and moisture. Can be used with confidence even extremely poor conditions.
· This insert bearing unit with a cover can be used with confidence in poor environmental conditions such as factories engaged in steel manufacturing, milling, cement making, and casting, and in machinery for aircraft, air conditioning, and public works. The advance receiving box for units with set screws and adapters included has a steel plate or cast iron cover mounted for dust prevention, and both the bearing and the bearing box are processed with sealing equipment to improve dust-proof properties.
· Deep groove shaped internal structure: The bearing interior is identical to the deep groove ball bearing structure of the 6200 and 6300 shape. For this reason, it can support both radial and axial loads and is low noise.
· Bearing and bearing box compatibility: Because the bearing and bearing box have mutual compatibility, the bearing can be replaced on its own as necessary, which is extremely convenient.
· Easy handling: The insert bearing unit is an integrated combination of a bearing and bearing box. The bearing is preloaded with an appropriate amount of high quality lubricant grease, so it can be operating immediately as is after mounting. For this reason, there is no concern of contaminants and other materials entering the bearing during handling, preventing trouble during mounting before it occurs.
· Simple mounting to the shaft: The insert bearing unit can be mounted to the shaft on the side of the inner ring with the two included hex socket head set screws, to the inner ring using the included mounting adapter for the tapered hole in the inner diameter, or mounted with the included eccentric wheel. All of these methods are simple procedures, and the shaft machining is easy.- Volume Discount
- Stock
Starting from∗ ： 13.86 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Pillow-Type Unit, Cylindrical-Bore Type With Set Screws, UCPA Type
ASAHI SEIKO
A more compact bearing box than the pillow-type unit UCP200 type, with screw holes for mounting to suit areas with space restrictions.Starting from∗ ： 22.97 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Pillow Unit Silver Series with Set Screws, Cylindrical Hole Shape, KP
ASAHI SEIKO
[Features]
· Although the bearing box is a standard pillow shape, it is smaller and more lightweight than conventional insert bearing units.
· Also, the bearing box is marked with a center mark for easy positioning.
· The fixation method for the bearing box and shaft is the set screw method.- Volume Discount
Starting from∗ ： 16.36 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Steel Plate Pillow-Type Unit, Cylindrical-Bore Type With Set Screws, BPP Type
ASAHI SEIKO
Combines a built-in bearing with a rubber seal in a simple double steel plate bearing box structure, making it suitable for a transmission shaft with a relatively light load and medium to low speed.Starting from∗ ： 14.05 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Pillow Unit Silver Series with Eccentric Wheel, Cylindrical Hole Shape, UP
ASAHI SEIKO
[Features]
· Smaller and more lightweight than conventional insert bearing units.
· Also, the bearing box is marked with a center mark for easy positioning.- Volume Discount
Starting from∗ ： 14.88 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Pillow-Type Unit, Cylindrical-Bore Type With Set Screws, UCPH Type
ASAHI SEIKO
Pillow-type unit UCP200-type bearing box with raised center height.- Volume Discount
Starting from∗ ： 23.54 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Pillow Unit Silver Series with Eccentric Wheel, Cylindrical Hole Shape, MUP
ASAHI SEIKO
The bearing, fixed eccentric wheel, and bearing box are all made of corrosion-resistant stainless steel, making the product suitable for use with machinery that doesn't handle rust well.
[Features]
· Logical steel center: The outer wheel's outer diameter is machined into a ball surface, fitting around the center of a bearing box machined in the same way. Because both of the spherical surfaces can be aligned, this ensures logical operation of the machinery and stops erratic shaft center behavior, preventing excessive force from being applied to the bearing due to complications.
· Supply method: Simply supply fresh grease at arbitrary intervals and ensure that the bearing internal workings are ejecting old grease to the exterior as much as possible to extend working life for both grease supplies and the bearing. The cast iron series comes standard with a supply method to ensure that it can be used in severe conditions for long periods of time with complete confidence.
· Excellent sealing equipment: The bearing is double-sealed with a steel plate slinger and a heat-resistant synthetic rubber seal. Friction is low and even if the shaft tilts the seal contact is unchanged. The result is an extremely effective seal that prevents both grease leaks and contamination of the interior by external trash and moisture. Can be used with confidence even extremely poor conditions.
· This insert bearing unit with a cover can be used with confidence in poor environmental conditions such as factories engaged in steel manufacturing, milling, cement making, and casting, and in machinery for aircraft, air conditioning, and public works. The advance receiving box for units with set screws and adapters included has a steel plate or cast iron cover mounted for dust prevention, and both the bearing and the bearing box are processed with sealing equipment to improve dust-proof properties.
· Deep groove shaped internal structure: The bearing interior is identical to the deep groove ball bearing structure of the 6200 and 6300 shape. For this reason, it can support both radial and axial loads and is low noise.
· Bearing and bearing box compatibility: Because the bearing and bearing box have mutual compatibility, the bearing can be replaced on its own as necessary, which is extremely convenient.
· Easy handling: The insert bearing unit is an integrated combination of a bearing and bearing box. The bearing is preloaded with an appropriate amount of high quality lubricant grease, so it can be operating immediately as is after mounting. For this reason, there is no concern of contaminants and other materials entering the bearing during handling, preventing trouble during mounting before it occurs.
· Simple mounting to the shaft: The insert bearing unit can be mounted to the shaft on the side of the inner ring with the two included hex socket head set screws, to the inner ring using the included mounting adapter for the tapered hole in the inner diameter, or mounted with the included eccentric wheel. All of these methods are simple procedures, and the shaft machining is easy.Starting from∗ ： 44.40 € Min. Shipping Days ： Same day *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Specifications |
| Unit, Type |
| Bearing Unit, Type |
| Shaft Bore Dia. d(mm) |
| Unit Body Material |
| Bearing Inner Dia. Shape |
| Pillow Type, Category |
| Rolling Element Material |
| Surface Treatment |
|
|
|
|
|
|
| |
| Brand | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO | ASAHI SEIKO |
| Product Series | Pillow-Type Unit, Cylindrical-Bore Type With Set Screws, UCPA Type | Pillow Unit Silver Series with Set Screws, Cylindrical Hole Shape, KP | Steel Plate Pillow-Type Unit, Cylindrical-Bore Type With Set Screws, BPP Type | Pillow Unit Silver Series with Eccentric Wheel, Cylindrical Hole Shape, UP | Pillow-Type Unit, Cylindrical-Bore Type With Set Screws, UCPH Type | Pillow Unit Silver Series with Eccentric Wheel, Cylindrical Hole Shape, MUP | |
| Starting from∗ | 13.86 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 22.97 € *Unit price with basic configuration | 16.36 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 14.05 € *Unit price with basic configuration | 14.88 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 23.54 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 44.40 € *Unit price with basic configuration |
| Min. Shipping Days ： | Same day | 5 Days | Same day | 5 Days | Same day | Same day | Same day |
| Specifications |
| ||||||
| Unit, Type | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit | Bearing Unit |
| Bearing Unit, Type | Pillow Type | Pillow Type | Pillow Type | Pillow Type | Pillow Type | Pillow Type | Pillow Type |
| Shaft Bore Dia. d(mm) | 12 ～ 140 | 12 ～ 50 | 10 ～ 30 | 12 ～ 35 | 10 ～ 30 | 12 ～ 50 | 10 ～ 30 |
| Unit Body Material | Cast Iron | Cast Iron | Others | Steel | Others | Cast Iron | Others |
| Bearing Inner Dia. Shape | Cylindrical Hole, Set Screw | Cylindrical Hole, Set Screw | Cylindrical Hole, Set Screw | Cylindrical Hole, Set Screw | Cylindrical Hole, Eccentric Collar | Cylindrical Hole, Set Screw | Cylindrical Hole, Eccentric Collar |
| Pillow Type, Category | Standard | Standard | Standard | Standard | Lightweight | High Center | Lightweight |
| Rolling Element Material | Stainless Steel | Stainless Steel | Stainless Steel | Steel | Stainless Steel | Stainless Steel | Stainless Steel |
| Surface Treatment | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Unit, Type
-
-
Plummer Block
-
-
Bearing Unit, Type
-
-
Square Flange Type -
Diamond-Shaped Flange Type
-
-
Shaft Bore Dia. d(mm)
- 8
- 10
- 12
- 12.7
- 15
- 15.875
- 17
- 19.05
- 19.05 - 30
- 20
- 22.225
- 22.225 - 35
- 23.812
- 23.813
- 25
- 25.4
- 28.575
- 28.575 - 40
- 30
- 30.162
- 30.163
- 31.75
- 31.75 - 50
- 33.34
- 34.925
- 34.93
- 35
- 36.512
- 36.513
- 36.513 - 45
- 36.513 - 55
- 38.1
- 40
- 41.275
- 41.275 - 60
- 42.862
- 44.45
- 45
- 47.625 - 65
- 49.213
- 50
- 50.8
- 53.975 - 75
- 55
- 55.562
- 55.563
- 55.563 - 80
- 57.15
- 60
- 61.913
- 61.913 - 90
- 63.5
- 65
- 68.262
- 68.263
- 70
- 74.613
- 74.613 - 85
- 74.613 - 100
- 75
- 79.375 - 90
- 80
- 82.55
- 85
- 87.313
- 87.313 - 120
- 90
- 95
- 100
- 105
- 110
- 114.3
- 115
- 120
- 125
- 130
- 131.763
- 138.113
- 140
-
Unit Body Material
-
Bearing Inner Dia. Shape
-
Cylindrical Hole
-
Cylindrical Hole, Set Screw
-
Cylindrical Hole, Eccentric Collar
-
Taper Hole
-
Taper Hole, Adapter
-
Cylindrical Hole
-
Pillow Type, Category
-
Standard
-
Thick
-
High Center
-
Narrow Width
-
Lightweight
-
Standard
-
Rolling Element Material
-
Surface Treatment
Narrow search by specifying Brand
-
- MISUMI (8)
- INA (108)
- SKF (37)
- MAEDLER (23)
- FAG (23)
- NORELEM (19)
- NIPPON PILLOW BLOCK (12)
- NTN (10)
- ASAHI SEIKO (7)
- FSBEARING (4)
- ZEN (3)
- SNR (3)
- NKE BEARINGS (2)
- TIMKEN (1)
- TOHO (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Pillow Type
Metoda płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.