AMF Tooling

Pull-stud size 150 Hardened, for pneumatic clamping module no. 6203SP-150 and 6109SP-150.

Zero-point clamping sleeve For screwing on. Hardened.

Pull-stud size 5 for M8 engagement screw Hardened, for clamping modules size 5.

Pull-stud size 140 Hardened, for pneumatic clamping module no. 6203SP-140.

Insertion tool For sizes RP250/251 and RM250/251.

Zero-point clamping sleeve For pressing in. Hardened.

Alignment tool K02 for timing pull-stud Suitable for order no. 427328.

Engagement screw Strength class 12.9.

Pull-stud nut Strength class 10. Suitable for pull-stud no. 6370ZN.

AMF-Cleaner, Ball Vertical Control design Cleaning tool for attachment to the machine spindle fits 16 mm Weldon holders.

AMF-Writer Small Marking tool, fits 12 mm collets and Weldon holders.

Key for collet chuck with torque wrench socket for chuck nuts (ER) to DIN 6499. Drive 1/2 square socket with ball-engagement groove. Special steel, hardened and zinc-plated. The product is available per 1 peace.

Insertion tool For sizes SP140 and SP150.

Insertion tool For sizes KP5 and KH5 in the screw-in version.

Actuating pin Not hardened, for mechanical clamping modules 6214RM-250 and 6214RM-251.

Counterbalance clamping sleeve For screwing on. Hardened.

Positioning pull-stud Hardened.

Insertion tool Special steel, hardened and blued in black oxide finish.

AMF Marker Medium Marking tool suitable for 20 mm collets and Weldon holders. 552306: lower pressing force, ideally suited for aluminium in conjunction with marking needle 550479 556949: higher pressing force, ideally suited for steel and stainless steel Marking needles are not supplied as standard.

Special pliers With one-sided plastic protective covering.

Marking needle fits AMF Marker Medium No. 1570MM.

AMF Marker Medium Marking tool suitable for 20 mm collets and Weldon holders. 552306: lower pressing force, ideally suited for aluminium in conjunction with marking needle 550479 556949: higher pressing force, ideally suited for steel and stainless steel Marking needles are not supplied as standard.

Marking needle fits AMF Marker Slimline No. 1580MSL.

Marking needle fits AMF Marker Small No. 1580MS.

Marking needle fits AMF Marker Large No. 1560ML.

Marking needle fits AMF Marker Extra Large No. 1550MXL.

AMF Marker Slimline Marking tool with long, narrow tip, suitable for 12 mm collets and Weldon holders. Marking needles are not included.

AMF Marker Small Marking tool, suitable for 12 mm collets and Weldon holders. Marking needles are not included.

AMF Marker Large Marking tool, suitable for 20 mm collets and Weldon holders (Weldon holders only when using the function check). Marking needles are not included.

AMF Marker Extra Large Marking tool, suitable for 20 mm collets and Weldon holders (Weldon holders only when using the function check). Marking needles are not included.

AMF-Writer Slimline Marking tool with long, narrow tip,fits 12 mm collets and Weldon holders.

Ball joint and adapter Accessory for AMF Cleaner, stick designOrder No. 17699: ball jointOrder No. 17673: adapter

AMF-Cleaner, universal nozzles AMF Cleaner,fits stick design. Designs:Order No. 17632: Low flowOrder No. 17640: StandardOrder No. 17657: High flow

AMF-Cleaner, stick design Cleaning tool for attachment to the machine spindlefits 16 mm Weldon holders.Designs:Order No. 17608: ShortOrder No. 17616: StandardOrder No. 17624: Long

AMF-Cleaner, Ball Horizontal design Cleaning tool for attachment to the machine spindle fits 16 mm Weldon holders.

AMF-Cleaner in Clean Case. Cleaning tools for attachment to the machine spindle, fits 16 mm Weldon holders. Components: 1 AMF Cleaner, Ball Horizontal 1 AMF Cleaner, Ball Vertical Control 1 AMF Cleaner, Stick 30 mm 1 AMF Cleaner, Stick 100 mm 1 AMF Cleaner, Stick 180 mm 3 multi-purpose nozzles 1 pressure gauge 1 adapter 1 ball joint 4 replacement lock screws 1 hexagon screwdriver Operating Manual

AMF-Writer Extra Large Marking tool,fits 20 mm collets and Weldon holders.

AMF-Writer Medium Marking tool,fits 20 mm collets and Weldon holders.

AMF-Writer Large Marking tool,fits 20 mm collets and Weldon holders.

Collet chuck key for collet chuck nuts (ER) to DIN 6499. Special steel, hardened and zinc-plated. With hole for hanging up. The product is available per 1 peace.

Collet chuck key (Mini) for collet chuck nuts (ER). Special steel, hardened and blued. The product is available per 1 peace.

Drill drift Special steel, hardened and blued. The product is available per 1 peace.

Drill drift, semi-automatic for morse tapers Special steel, hardened and blued. Grip: powder-coated, red. With finger protection!! The product is available per 1 peace.

Wrench for milling arbor screws for tightening milling arbor screws to DIN 6367. Special steel, hardened and blued. The product is available per 1 peace.