Data Measurement Equipment（Product Type：Data equipment related goods Page 6）

?* Information on days to ship and prices

• 

  Digital Indicator Signal ID-C, ANSI/AGD, Inch/Metric

  MITUTOYO

  This is an externally-powered Digimatic Indicator with a N-ch open drain –NG, OK, +NG output.Dust-protected and protected against splashing water, complying with IEC 60529 (equivalent to IP54) Measures MAX/MIN/RANGE (run-out value). Saves three different Preset and Tolerance settings. Fast measurement frequency mode (detection cycle 50 times/s) for reliable measurement in the peak detection mode (MAX/MIN/RANGE) Calculation function Ax. Coefficient A freely definable, x = displacement of the plungerAnalogue bar graph in the display (12 different scales switchable) GO/±NG tolerance judgment function

  Select to compare

  Configure now
  Starting from∗ ：	784.00 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Digital Indicator Peak Hold, ANSI / AGD, Inch/Metric

  MITUTOYO

  This indicator is the MAX/MIN/RANGE value holding function model It offers the following benefits:
  The MAX/MIN/RANGE (run-out value) can be measured.
  A fast measurement frequency mode(detection cycle 20 ms or 50 times/s) is selectable to measure in the peak detection mode (MAX/MIN/RANGE) more reliably. Easy indicator setup via a setup menu.
  Analogue bar graph in the display (12 different scales switchable).
  GO/±NG tolerance judgement function. This indicator enables the use of a calculation function for the measured value Ax. Coefficient A is freely definable and x = displacement of the plunger. A USB interface box can be used to set up the indicator from PC via dedicated software.

  Select to compare

  Configure now
  Starting from∗ ：	523.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator ID-U, Inch/Metric

  MITUTOYO

  This is a slim type of digital indicator with a 25 mm range. The ABSOLUTE Digimatic Indicator ID-U offers you the following benefits:
  The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle.Its compact design makes it ideal for installing into measuring fixtures.Exceptional battery life.

  Select to compare

  Configure now
  Starting from∗ ：	254.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator ID-U, ANSI/AGD

  MITUTOYO

  An economical, slim-style Mitutoyo digital indicator with a long battery life suited to installation in measuring jigs. ABSOLUTE System scale for error free, high-speed measurement. SPC data output.

  Select to compare

  Configure now
  Starting from∗ ：	251.00 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Digital Indicator ID-U

  MITUTOYO

  An economical, slim-style Mitutoyo digital indicator with an extemely long battery life suited to installation in measuring jigs where access may be restricted. ABSOLUTE System scale for error free, high-speed measurement. SPC data output.

  Select to compare

  Configure now
  Starting from∗ ：	254.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator ID-S, IP53

  MITUTOYO

  This is a standard model of indicator that is reliable and easy to use.The ABSOLUTE Digimatic Indicator ID-S offers you the following benefits:
  The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle.You can access all functions by using the large, user-friendly buttons on the front of the indicator.
  Large character height of 9 mm provides good readability.Exceptional battery life.

  Select to compare

  Configure now
  Starting from∗ ：	401.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator ID-S, ANSI/AGD, IP53

  MITUTOYO

  This is a standard model of indicator that is reliable and easy to use.The ABSOLUTE Digimatic Indicator ID-S offers you the following benefits:
  The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle.You can access all functions by using the large, user-friendly buttons on the front of the indicator.
  Large character height of 9 mm provides good readability.Exceptional battery life.

  Select to compare

  Configure now
  Starting from∗ ：	181.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator ID-S, ANSI/AGD

  MITUTOYO

  This is a standard model of indicator that is reliable and easy to use.The ABSOLUTE Digimatic Indicator ID-S offers you the following benefits:
  The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle.You can access all functions by using the large, user-friendly buttons on the front of the indicator.
  Large character height of 9 mm provides good readability.Exceptional battery life.

  Select to compare

  Configure now
  Starting from∗ ：	181.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator ID-N, IP66

  MITUTOYO

  A Mitutoyo slim-style dustproof and waterproof digital indicator suitable for use in the presence of coolant or cutting oil. ABSOLUTE System scale for error free, high-speed measurement. Functionality includes switchable resolution, tolerance judgement, data hold and readout rotation. SPC data output.

  Select to compare

  Configure now
  Starting from∗ ：	278.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator ID-H, BS AC-Adapter

  MITUTOYO

  This is a superior multi-function indicator that gives you high accuracy and high resolution of 0.0005 mm. The Digimatic Indicator ID-H offers you the following benefits:
  2-colour LCD backlight (green and red) provides you with visual GO/±NG tolerance judgement and analogue bar-graph display.
  You can display the maximum, minimum or range (runout value) . Lifting mechanism over 30 mm with cable release (optional). You can carry out zero-setting and presetting with the optional remote controller, without having to touch the indicator. The remote control system can be implemented in advance with the built-in RS-232 interface and a PC. External power supply via AC-Adapter.

  Select to compare

  Configure now
  Starting from∗ ：	910.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator ID-F, ASME/ANSI/AGD

  MITUTOYO

  This is a superior multifunction indicator.The ABSOLUTE Digimatic Indicator ID-F offers you the following benefits:
  Bidirectional Digimatic S1 interface Red/Green LCD backlight provides you with visual GO/±NG tolerance judgement Analogue bar-graph display MAX/MIN/RANGE (runout value) function with a frequency of 500 times/s External power supply via AC-Adapter High accuracy and 0.5 µm digital step

  Select to compare

  Configure now
  Starting from∗ ：	818.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator ID-F

  MITUTOYO

  This is a superior multifunction indicator.The ABSOLUTE Digimatic Indicator ID-F offers you the following benefits:
  Bidirectional Digimatic S1 interface Red/Green LCD backlight provides you with visual GO/±NG tolerance judgement Analogue bar-graph display MAX/MIN/RANGE (runout value) function with a frequency of 500 times/s External power supply via AC-Adapter High accuracy and 0.5 µm digital step

  Select to compare

  Configure now
  Starting from∗ ：	818.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator ID-C, Inch/Metric

  MITUTOYO

  This is a multifunction standard indicator that is reliable and easy to use. Bidirectional communication e.g. to perform parameter setting from a PC (Digimatic S 1 interface) is possible. The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle. Excellent visibility with a large digital/analog display. Model with 0.5 µm digital step is available. Measurements such as simple calculation and peak detection are possible. Equipped with a calibration schedule warning function. GO/±NG judgement is performed by setting the upper and lower tolerances. Display 330° rotatable. A function lock protects the display against unauthorised use.

  Select to compare

  Configure now
  Starting from∗ ：	333.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator ID-C, ASME/ANSI Type

  MITUTOYO

  This is a multifunction standard indicator that is reliable and easy to use. Bidirectional communication e.g. to perform parameter setting from a PC (Digimatic S 1 interface) is possible. The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle. Excellent visibility with a large digital/analog display. Model with 0.5 µm digital step is available. Measurements such as simple calculation and peak detection are possible. Equipped with a calibration schedule warning function. GO/±NG judgement is performed by setting the upper and lower tolerances. Display 330° rotatable. A function lock protects the display against unauthorised use.

  Select to compare

  Configure now
  Starting from∗ ：	329.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator ID-C

  MITUTOYO

  This is a multifunction standard indicator that is reliable and easy to use. Bidirectional communication e.g. to perform parameter setting from a PC (Digimatic S 1 interface) is possible. The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle. Excellent visibility with a large digital/analog display. Model with 0.5 µm digital step is available. Measurements such as simple calculation and peak detection are possible. Equipped with a calibration schedule warning function. GO/±NG judgement is performed by setting the upper and lower tolerances. Display 330° rotatable. A function lock protects the display against unauthorised use.

  Select to compare

  Configure now
  Starting from∗ ：	333.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  T-Stylus Holder M2/M4

  MITUTOYO

  Multiway stylus holders facilitate the flexible configuration of star styli.

  Select to compare

  Configure now
  Starting from∗ ：	1,811.84 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Digital Indicator ID-B, IP66

  MITUTOYO

  This is a back-plunger model that is highly resilient and robust. The ABSOLUTE Digimatic Indicator ID-B offers you the following features:
  It is a back plunger type, with the display viewed from above.
  Its slim body design is ideal for multi-point measurements. The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle. It has excellent resistance against water and dust (IP66 protection level) allowing you to use it in machining situations that include splashing coolant fluid. You can perform GO/±NG judgement.

  Select to compare

  Configure now
  Starting from∗ ：	312.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digimatic Interface, Series 63

  MITUTOYO

  The DMX-8/2 8 channel D-SUB9 serial interface is a microcontrolled interface for connecting eight measurement devices, with Digimatic output, to the RS-232C serial port of a computer. The DMX-8/2 model provides power and an ABS/Zero button to operate Series 575 ABS Linear Gauges.

  Select to compare

  Configure now
  Starting from∗ ：	150.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digimatic Interface Input Tool

  MITUTOYO

  This D-SUB9 serial interface is a microcontrolled interface for connecting one single measurement device, with Digimatic output, to the RS-232C interface of a computer. It offers you the following benefits:
  Easily connect a measuring device to a computer‘s RS-232C serial port.
  No external power supply is needed, as the small level of power needed is supplied by the handshake lines RTS and DTR.

  Select to compare

  Configure now
  Starting from∗ ：	399.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digimatic Data Logger

  MITUTOYO

  The Digimatic DL-1000 and 1000 M are data loggers designed for storing measurement data recorded by a Digimatic measuring instrument for subsequent output to a computer. They allow you to collect data when away from a PC, and transfer it later. These Digimatic Data Loggers offer the following benefits:
  The measuring device is connected to the I/O port of the DL-1000/1000 M with a data cable, and you can transmit data either using the data button on the measuring device or on the DL-1000/1000 M.For data transfer the devices are connected via an interface to the target computer. Data transfer from the DL-1000/1000 M is executed with the data button or footswitch of an interface or upon request from the respective software. The DL-1000/1000 M is recognised by the measurement device as a Digimatic measurement instrument.You can output data directly to a printer equipped with a Digimatic interface.

  Select to compare

  Configure now
  Starting from∗ ：	731.84 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator ID-B, IP66, ANSI/AGD

  MITUTOYO

  A Mitutoyo dustproof, waterproof, back-plunger type digital indicator suitable for use in the presence of coolant or cutting oil. ABSOLUTE System scale for error free, high-speed measurement. Functionality includes switchable resolution, tolerance judgement, data hold and readout rotation. SPC data output.

  Select to compare

  Configure now
  Starting from∗ ：	312.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Clamping Claw

  MITUTOYO

  Clamping claw for fixing of base plates on the measuring table.

  Select to compare

  Configure now
  Starting from∗ ：	23.68 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Cylinder Stylus M3 Stainless Steel

  MITUTOYO

  Cylinder styli are designed to inspect especially thin features of the workpiece, where the correct contact with a ball stylus cannot be executed. Stainless steel is the primary material of choice for high-strength precision styli and extensions If weight can be disregarded.

  Select to compare

  Configure now
  Starting from∗ ：	26.32 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Cylinder Stylus M3 Ruby

  MITUTOYO

  Cylinder styli are designed to inspect especially thin features of the workpiece, where the correct contact with a ball stylus cannot be executed. Stainless steel is the primary material of choice for high-strength precision styli and extensions If weight can be disregarded.

  Select to compare

  Configure now
  Starting from∗ ：	353.95 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Cylinder Stylus M3

  MITUTOYO

  Cylinder styli are designed to inspect especially thin features of the workpiece, where the correct contact with a ball stylus cannot be executed.

  Select to compare

  Configure now
  Starting from∗ ：	220.26 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Cylinder Stylus M2 Stainless Steel

  MITUTOYO

  Cylinder styli are designed to inspect especially thin features of the workpiece, where the correct contact with a ball stylus cannot be executed. Stainless steel is the primary material of choice for high-strength precision styli and extensions If weight can be disregarded.

  Select to compare

  Configure now
  Starting from∗ ：	25.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Cylinder Stylus M2 Ruby

  MITUTOYO

  Cylinder styli are designed to inspect especially thin features of the workpiece, where the correct contact with a ball stylus cannot be executed. Straight styli are used to detect easily reachable features on the measured surface. Because of the adhesive material build up, the scanning of aluminium surfaces with ruby tips is not recommended.

  Select to compare

  Configure now
  Starting from∗ ：	186.84 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Cylinder Stylus M2 Carbide

  MITUTOYO

  Cylinder styli are designed to inspect especially thin features of the workpiece, where the correct contact with a ball stylus cannot be executed.

  Select to compare

  Configure now
  Starting from∗ ：	94.74 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Cylinder Pin Insert

  MITUTOYO

  Cylinder pin receiver insert for receiving parts in bores. Base shaft Ø 8.0 mm

  Select to compare

  Configure now
  Starting from∗ ：	22.37 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Cubical Stylus Holder M5, Titanium

  MITUTOYO

  Multiway stylus holders enable the flexible configuration of star styli.

  Select to compare

  Configure now
  Starting from∗ ：	77.63 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Cubical stylus Holder M5, Aluminium

  MITUTOYO

  Multiway stylus holders enable the flexible configuration of star styli.

  Select to compare

  Configure now
  Starting from∗ ：	102.63 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Cross Connector Multiflex

  MITUTOYO

  For the composition of frames or sideways mounting on profile components

  Select to compare

  Configure now
  Starting from∗ ：	253.95 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Connector Kit Multiflex-profile

  MITUTOYO

  For the front end connection of Multiflex profiles

  Select to compare

  Configure now
  Starting from∗ ：	339.47 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Connector

  MITUTOYO

  e.g. as a rotating joint in connection with location pins with clearance holes

  Select to compare

  Configure now
  Starting from∗ ：	17.76 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Connection Unit, U-WAVE Fit

  MITUTOYO

  This compact and wireless units is used to connect U-WAVE to a measuring tool with the Digimatic output feature.

  Select to compare

  Configure now
  Starting from∗ ：	105.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Connection Unit Indicator

  MITUTOYO

  This connection unit connects a 12,7 mm/ 0.5 inch ID-C indicator with Digimatic S1 interface (2022 model)  to its U-WAVE fit unit.

  Select to compare

  Configure now
  Starting from∗ ：	124.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Cone Receiver Insert

  MITUTOYO

  Cone receiver for receiving parts in bores or centerings etc.

  Select to compare

  Configure now
  Starting from∗ ：	13.16 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  CMM Stylus Adapter M3

  MITUTOYO

  Mitutoyo M3 CMM Stylus Adapter.

  Select to compare

  Configure now
  Starting from∗ ：	67.50 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  CMM Stylus Adapter M2

  MITUTOYO

  Mitutoyo M2 CMM Stylus Adapter.

  Select to compare

  Configure now
  Starting from∗ ：	67.50 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Clamping Plate for Eco-fix Rail System

  MITUTOYO

  Select to compare

  Configure now
  Starting from∗ ：	132.63 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Clamping hand

  MITUTOYO

  Repeatable fixturing relies on a secure clamping of the to be measured component. Therefore a wide selection of clamping components is available.

  Select to compare

  Configure now
  Starting from∗ ：	107.76 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Clamp Lever for Slider Components

  MITUTOYO

  Quickly fix multiflex slider elements in position.

  Select to compare

  Configure now
  Starting from∗ ：	23.44 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Clamp for Eco-fix Rail

  MITUTOYO

  Select to compare

  Configure now
  Starting from∗ ：	62.76 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Centering Insert

  MITUTOYO

  Centering insert to accommodate e.g.rotationally symmetrical test parts without center hole.

  Select to compare

  Configure now
  Starting from∗ ：	28.95 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  CC-Link / I/F Unit for EJ Counter

  MITUTOYO

  The EJ-Counter is targeted at secondary and automatic embedded markets as well as conventional measurement rooms. Multipoint measuring systems with a maximum of 16 gauges can be configured. The EJ-Counter is attached to a DIN rail for use.
  Due to the small size of the unit, it can be installed inside of switchboards /equipment. When using multiple EJ Counters linked together, connection of power to one EJ Counter also supplies power to the other linked counters.In addition, through the industrial I/F unit (sold separately), data can be managed on the upper side, and it is possible to support smart factories such as IoT and M2M. Easy setup with the LG QuickSetup Tool software (free of charge) (USB interface is required) .

  Select to compare

  Configure now
  Starting from∗ ：	1,027.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...