Rejestracja

Inner Diameter Measuring Instruments

    • Internal Digital Caliper Gauge

        MITUTOYO

        Internal Digital Caliper Gauge

        A Mitutoyo internal digital caliper gauge designed for use as a comparator, to be set up using a setting ring or micrometer. The caliper is spring loaded and makes point contact at constant measuring force.
        Czytaj dalej
        Cena standardowa (bez VAT):
        742.50 €
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • Gauge Sets

          MITUTOYO

          Gauge Sets

          A set of six Mitutoyo transfer gauges that enables the diameter of holes, bores or grooves to be measured with outside micrometers or calipers. In operation the spring loaded plunger of a gauge is allowed to expand within the feature to be measured and then locked in place using the knurled rotary control on the end of the handle. In practice some manipulation is necessary to ensure that the minimum size has been captured, after which the gauge is carefully withdrawn so that the dimension across the contact surfaces can be measured. Enables small hole, bore and groove measurement using existing workshop tools. Knurled finish provides secure handling and easy locking.
          Czytaj dalej
          Cena standardowa (bez VAT):
          324.00 €
          Standardowa data wysyłki:
          5 dni robocze
          Konfiguruj
        • 177 Series Set Ring

            MITUTOYO

            177 Series Set Ring

            Used for base point confirmation of internal micrometer, hole test, borematic, cylinder gauge, etc.
            Czytaj dalej
            Cena standardowa (bez VAT):
            126.00 €
            Standardowa data wysyłki:
            5 dni robocze
            Konfiguruj
          • Cena standardowa (bez VAT):
            765.00 €
            Standardowa data wysyłki:
            7 dni robocze
            Konfiguruj
          • Cena standardowa (bez VAT):
            703.40 €
            Standardowa data wysyłki:
            7 dni robocze
            Konfiguruj
          • Cena standardowa (bez VAT):
            1,045.00 €
            Standardowa data wysyłki:
            7 dni robocze
            Konfiguruj
          • Telescopic Gauge

              MITUTOYO

              Telescopic Gauge

              A Mitutoyo transfer gauge that enables the diameter of holes, bores or grooves to be measured with outside micrometers or calipers. In operation the spring loaded plunger is allowed to expand within the feature to be measured and then locked in place using the knurled rotary control on the end of the handle. In practice some manipulation is necessary to ensure that the minimum size has been captured, after which the gauge is carefully withdrawn so that the dimension across the contact surfaces can be measured.
              Czytaj dalej
              Cena standardowa (bez VAT):
              58.00 €
              Standardowa data wysyłki:
              5 dni robocze
              Konfiguruj
            • Digital ABSOLUTE Borematic (Internal)

                MITUTOYO

                Digital ABSOLUTE Borematic (Internal)

                This is a individual unit Three-Point Digimatic Snap Open Bore Gauge.It offers you the following benefits:- It enables you to take measurements easily and quickly.- Titanium-coated measuring pins gives you excellent durability and impact resistance.- 330° rotatable display unit also gives you easy reading at any angle.- GO/NG tolerance judgement function.
                Czytaj dalej
                Cena standardowa (bez VAT):
                1,405.00 €
                Standardowa data wysyłki:
                5 dni robocze
                Konfiguruj
              • Cena standardowa (bez VAT):
                684.00 €
                Standardowa data wysyłki:
                7 dni robocze
                Konfiguruj
              • Cena standardowa (bez VAT):
                684.00 €
                Standardowa data wysyłki:
                7 dni robocze
                Konfiguruj
              • Cena standardowa (bez VAT):
                205.50 €
                Standardowa data wysyłki:
                7 dni robocze
                Konfiguruj
              • Cena standardowa (bez VAT):
                612.00 €
                Standardowa data wysyłki:
                7 dni robocze
                Konfiguruj
              • Telescopic Gauge, Inch

                  MITUTOYO

                  Telescopic Gauge, Inch

                  A Mitutoyo transfer gauge that enables the diameter of holes, bores or grooves to be measured with outside micrometers or calipers. In operation the spring loaded plunger is allowed to expand within the feature to be measured and then locked in place using the knurled rotary control on the end of the handle. In practice some manipulation is necessary to ensure that the minimum size has been captured, after which the gauge is carefully withdrawn so that the dimension across the contact surfaces can be measured.
                  Czytaj dalej
                  Cena standardowa (bez VAT):
                  58.00 €
                  Standardowa data wysyłki:
                  5 dni robocze
                  Konfiguruj
                • Stand for Bore Gauge Series 526

                    MITUTOYO

                    Stand for Bore Gauge Series 526

                    Quick stand for precision bore gauges, for serial inside measuring of small parts.
                    Czytaj dalej
                    Cena standardowa (bez VAT):
                    1,178.00 €
                    Standardowa data wysyłki:
                    60 dni robocze
                    Konfiguruj
                  • Internal Dial Caliper Gauge, Inch

                      MITUTOYO

                      Internal Dial Caliper Gauge, Inch

                      This analog Internal Dial Caliper Gauge offers you the following benefits:- Excellent resistance against water and dust (IP65 protection level)- Optimized measuring force- Ergonomically designed to lie securely in your hand when measuring
                      Czytaj dalej
                      Cena standardowa (bez VAT):
                      712.50 €
                      Standardowa data wysyłki:
                      5 dni robocze
                      Konfiguruj
                    • Internal Dial Caliper Gauge

                        MITUTOYO

                        Internal Dial Caliper Gauge

                        A Mitutoyo internal dial caliper gauge designed for use as a comparator, to be set up using a setting ring or micrometer. The caliper is spring loaded and makes point contact at constant measuring force.
                        Czytaj dalej
                        Cena standardowa (bez VAT):
                        755.00 €
                        Standardowa data wysyłki:
                        5 dni robocze
                        Konfiguruj
                      • Gauge Sets, Inch

                          MITUTOYO

                          Gauge Sets, Inch

                          A set of six Mitutoyo transfer gauges that enables the diameter of holes, bores or grooves to be measured with outside micrometers or calipers. In operation the spring loaded plunger of a gauge is allowed to expand within the feature to be measured and then locked in place using the knurled rotary control on the end of the handle. In practice some manipulation is necessary to ensure that the minimum size has been captured, after which the gauge is carefully withdrawn so that the dimension across the contact surfaces can be measured. Enables small hole, bore and groove measurement using existing workshop tools. Knurled finish provides secure handling and easy locking.
                          Czytaj dalej
                          Cena standardowa (bez VAT):
                          324.00 €
                          Standardowa data wysyłki:
                          5 dni robocze
                          Konfiguruj
                        • Digital Indicator, Bore Gauge ID-C, Inch/Metric

                            MITUTOYO

                            Digital Indicator, Bore Gauge ID-C, Inch/Metric

                            This indicator is designed for inside diameter measurement applications on bore gaugesIt offers the following benefits:- Minimum value holding function that allows you to easily detect a hole diameter.- Analogue bar graph in the display (12 different scales switchable)- The analogue bar graph enhances usability by adding a dial gauge “feel” to digital measurement.- GO/±NG tolerance judgement function- A fast measurement frequency mode(detection cycle 20ms or 50times/s) is selectable to measure in the peak detection mode more reliably.- Easy indicator setup via a setup menu- A USB interface box can be used to set up the indicator from PC via dedicated software.
                            Czytaj dalej
                            Cena standardowa (bez VAT):
                            563.00 €
                            Standardowa data wysyłki:
                            5 dni robocze
                            Konfiguruj
                          • Digital Indicator, Bore Gauge ID-C

                              MITUTOYO

                              Digital Indicator, Bore Gauge ID-C

                              This indicator is designed for inside diameter measurement applications on bore gaugesIt offers the following benefits:- Minimum value holding function that allows you to easily detect a hole diameter.- Analogue bar graph in the display (12 different scales switchable)- The analogue bar graph enhances usability by adding a dial gauge “feel” to digital measurement.- GO/±NG tolerance judgement function- A fast measurement frequency mode(detection cycle 20ms or 50times/s) is selectable to measure in the peak detection mode more reliably.- Easy indicator setup via a setup menu- A USB interface box can be used to set up the indicator from PC via dedicated software.
                              Czytaj dalej
                              Cena standardowa (bez VAT):
                              563.00 €
                              Standardowa data wysyłki:
                              60 dni robocze
                              Konfiguruj
                            • Digital ABSOLUTE Bore Gauge, Inch/Metric

                                MITUTOYO

                                Digital ABSOLUTE Bore Gauge, Inch/Metric

                                A Mitutoyo ABSOLUTE Digimatic bore gauge designed exclusively for ID measurement. A minimum value holding function provides easy measurement of hole diameter. Up to three sets of master value and upper/lower tolerance values can be memorized and recalled at the push of a button. An analog bar indicator is integrated to enhance ease of reading, especially for GO/å±NG judgement. Measurements can be made inside very deep holes by using up to four extension rods.
                                Czytaj dalej
                                Cena standardowa (bez VAT):
                                1,750.26 €
                                Standardowa data wysyłki:
                                5 dni robocze
                                Konfiguruj
                              • Digital ABSOLUTE Bore Gauge

                                  MITUTOYO

                                  Digital ABSOLUTE Bore Gauge

                                  This is a Digimatic bore gauge that lets you take digital inside measurements with amazing accuracy even at the maximum 2 m depth.The ABSOLUTE Digimatic Bore Gauge offers you the following benefits:- Precision bore gauge lets you easily measure the diameter of deep bores without loss of accuracy.- You can store and recall up to 3 sets of master values and upper/lower tolerance values at the push of a button.GO/±NG judgement can be set. Up to max. four extension rods (250 or 500 mm) can be used.
                                  Czytaj dalej
                                  Cena standardowa (bez VAT):
                                  1,750.26 €
                                  Standardowa data wysyłki:
                                  5 dni robocze
                                  Konfiguruj
                                • Contact Point Series 526

                                    MITUTOYO

                                    Contact Point Series 526

                                    Split-ball probes are protected by a diamond-like DLC coating.Split-ball probes are hard chrome platedDLC Black Diamond:- Extremely high wear protection, due to low frictional resistance- Safety due to high hardness and resistance- Safety due to sustained accuracy and precision
                                    Czytaj dalej
                                    Cena standardowa (bez VAT):
                                    121.00 €
                                    Standardowa data wysyłki:
                                    5 dni robocze
                                    Konfiguruj
                                  • Contact Point for Series 526

                                      MITUTOYO

                                      Contact Point for Series 526

                                      Split-ball probes are protected by a diamond-like DLC coating.Split-ball probes are hard chrome platedDLC Black Diamond:- Extremely high wear protection, due to low frictional resistance- Safety due to high hardness and resistance- Safety due to sustained accuracy and precision
                                      Czytaj dalej
                                      Cena standardowa (bez VAT):
                                      66.00 €
                                      Standardowa data wysyłki:
                                      5 dni robocze
                                      Konfiguruj
                                    • Bore Gauge with Micrometer Head

                                        MITUTOYO

                                        Bore Gauge with Micrometer Head

                                        This is a Micrometer Head that enables measurements without interchangeable anvils.It offers you the following benefits:- A long plunger stroke gives you amazing accuracy.- Contact points are carbide (>18 mm range), giving you high durability and wear resistance.- Wide measuring range with sub-anvils.
                                        Czytaj dalej
                                        Cena standardowa (bez VAT):
                                        531.00 €
                                        Standardowa data wysyłki:
                                        5 dni robocze
                                        Konfiguruj
                                      • Cena standardowa (bez VAT):
                                        1,867.50 €
                                        Standardowa data wysyłki:
                                        5 dni robocze
                                        Konfiguruj
                                      • Auxiliary Block Kit for Bore Gauge

                                          MITUTOYO

                                          Auxiliary Block Kit for Bore Gauge

                                          This is an Auxiliary Block Kit that allows you to efficiently carry out reference-setting of dial bore gauges and tubular inside micrometers (18-150mm).
                                          Czytaj dalej
                                          Cena standardowa (bez VAT):
                                          292.11 €
                                          Standardowa data wysyłki:
                                          5 dni robocze
                                          Konfiguruj
                                        • Cena standardowa (bez VAT):
                                          41.00 €
                                          Standardowa data wysyłki:
                                          5 dni robocze
                                          Konfiguruj
                                        • Cena standardowa (bez VAT):
                                          159.00 €
                                          Standardowa data wysyłki:
                                          5 dni robocze
                                          Konfiguruj