Jigs for Manual Tightening（Page 4）

Shipping Days	All Same day 2 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 12 Days or Less

?* Information on days to ship and prices

• 

  Start Element 7110FT

  NABEYA

  S45C / quenched base unit low type (for T slot).

  Select to compare

  Configure now
  Starting from∗ ：	339.86 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Double Swing Clamp Set S Type

  NABEYA

  This product can clamp 2 workpieces at the same time. It has a compact structure and can be used in small spaces. The freely rotatable structure saves time in loading and unloading workpieces.

  Select to compare

  Configure now
  Starting from∗ ：	107.34 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Toe Adjusting Clamp

  NABEYA

  [Features]
  · Tightening is performed while pressing the movable part downward, preventing the workpiece from lifting.
  · Lifting prevention (generates force in the downward direction).
  · Ideal for thin workpieces.
  · Dovetail groove can withstand lateral force.
  · Free Mounting Position

  Select to compare

  Configure now
  Starting from∗ ：	427.55 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Toggle Down Clamp 6800

  NABEYA

  [Features]
  · 6800: SS400/6800NI: SUS304, 6800: Zinc-plated toggle-down clamp 6800.
  · 6800S: The structure prevents operation unless holding the safety lever, preventing erroneous operation and malfunction.

  Select to compare

  Configure now
  Starting from∗ ：	72.64 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Hold Clamp, Clamp

  NABEYA

  Includes a hex wrench. Completely tightened with a sliding mechanism. Saves time thanks to its "one point" fitting and removal function. For machining the whole top surface of the workpiece and through-hole machining. Fully heat-treated for semi-permanent use. A workpiece rising prevention mechanism type.

  Select to compare

  Configure now
  Starting from∗ ：	284.99 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Four-Groove

  NABEYA

  Maximum tightening force: 40 kN (tightening torque: 190 N·m)

  Select to compare

  Configure now
  Starting from∗ ：	2,328.79 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Heavy Duty Toggle Side Clamp 6845

  NABEYA

  Can be used for either pushing or pulling. Clamping screw and rubber cap attached.

  Select to compare

  Configure now
  Starting from∗ ：	156.86 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Heavy Duty Toggle Hook Clamp 6849PH

  NABEYA

  Heavy-duty type hook clamp. The hook length can be adjusted.

  Select to compare

  Configure now
  Starting from∗ ：	351.08 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Clamp Support Screw Jack

  NABEYA

  Clamp support screw jack is convenient for supporting a variety of clamps. When one unit is insufficient in operation or height, two or three units can be stacked together. (Only for same sizes) The attachment is convenient for supporting irregular objects.

  Select to compare

  Configure now
  Starting from∗ ：	53.36 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Quick Hold Down Clamp

  NABEYA

  Can be selected from T-slot nut (T-groove type) / T-slot nut (tapped hole type).

  Select to compare

  Configure now
  Starting from∗ ：	161.45 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  PA Feed Plate for Quick Lock

  NABEYA

  Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

  Select to compare

  Configure now
  Starting from∗ ：	22.27 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Adjustment Bolt for Quick Lock

  NABEYA

  Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

  Select to compare

  Configure now
  Starting from∗ ：	53.81 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Oil Cup for Quick Lock

  NABEYA

  Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.47 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Knob for Quick Lock

  NABEYA

  Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

  Select to compare

  Configure now
  Starting from∗ ：	27.54 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Wedge Clamp Stopper Part (for T-Shaped Grooves)

  NABEYA

  It is for the T-groove of the stopper part of the wedge clamp set. Compatible T-groove 14 mm to 22 mm, Workpiece contact surface can be selected from 3 types: flat, step, universal type. The manufacturer also sell the stopper part only.

  Select to compare

  Configure now
  Starting from∗ ：	123.03 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Wedge Clamp Stopper Part (for Tapped Holes)

  NABEYA

  Wedge clamp, stopper tapped hole, flat type.

  Select to compare

  Configure now
  Starting from∗ ：	114.56 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Wedge Clamp Set (for Tapped Holes)

  NABEYA

  The workpiece is prevented from rising up by being fastened downward. Ideal for machining through holes.

  Select to compare

  Configure now
  Starting from∗ ：	198.17 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Applicable Clamp Units 7110M

  NABEYA

  This is the clamp unit part of the Clamp Unit 7110 series. M 12 mm, M 16 mm / Select from 2 types. Since it is a unit, nuts, bolts, support screws (height adjustment), etc., are included, so there is no need to assemble.

  Select to compare

  Configure now
  Starting from∗ ：	781.21 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Swing Clamp B Type

  NABEYA

  It can be horizontally swung to attach and remove workpieces. Can be used for T-grooves and for tapped holes. Automatically rises via a built-in spring when unclamped. Attachments can be mounted.

  Select to compare

  Configure now
  Starting from∗ ：	355.36 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Swing Clamp A Type

  NABEYA

  [Features]
  · It can be horizontally swung to attach and remove workpieces.
  · Can be used for T-grooves and for tapped holes.
  · The dedicated height adjust support enables the clamp height to be adjusted to the workpiece.
  · Tool-less (with handle).
  · Free clamping direction (without guide groove).
  · The built-in spring causes it to automatically rise when unclamping.
  · Attachments can be mounted

  Select to compare

  Configure now
  Starting from∗ ：	377.95 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Swing Clamp Joint S Type

  NABEYA

  This is a block for adjusting the height of the S-type swing clamp set. If the height of the S-type swing clamp set is not sufficient, select the S-type swing clamp joint. M 8 mm, M 16 mm / 2 types available

  Select to compare

  Configure now
  Starting from∗ ：	21.97 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Toggle Down Clamp 6802

  NABEYA

  Single-action clamp for vertical clamp. There is no troublesome screw feeding. The 6802S type also has a careless mistake reduction function that makes it impossible to operate without holding the safety lever.

  Select to compare

  Configure now
  Starting from∗ ：	81.19 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Toggle Side Clamp 6850 (Pneumatic Type)

  NABEYA

  Comes with a double-acting pneumatic cylinder.

  Select to compare

  Configure now
  Starting from∗ ：	814.43 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Toggle Hook Clamp 6847

  NABEYA

  Suitable for tightening drum and can lids. The hook length can be adjusted.

  Select to compare

  Configure now
  Starting from∗ ：	149.33 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Toggle Hook Clamp 6847S

  NABEYA

  The structure prevents return unless the button is pressed, preventing erroneous operation and malfunction. Suitable for tightening drum and can lids. The hook length can be adjusted.

  Select to compare

  Configure now
  Starting from∗ ：	209.97 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Universal Clamp Main Body

  NABEYA

  [Features]
  · Parts for universal clamps.
  · It can steplessly fasten tall and short workpieces.

  Select to compare

  Configure now
  Starting from∗ ：	77.95 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Attachment for Aluminum Jack

  NABEYA

  Attachment for A5056 aluminum jack.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	23.89 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Screw for TCL / TCH

  NABEYA

  It is a part for toe adjustment clamp. The screw is common to all sizes. The manufacturer sell from parts

  Select to compare

  Configure now
  Starting from∗ ：	33.47 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  PA Adjustment Bolt for Quick Lock

  NABEYA

  Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

  Select to compare

  Configure now
  Starting from∗ ：	22.27 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  PA Spring for Quick Lock

  NABEYA

  Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

  Select to compare

  Configure now
  Starting from∗ ：	32.79 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Side Jack A Type

  NABEYA

  Simply insert into the T-groove. Useful for receiving cutting resistance from the side.

  Select to compare

  Configure now
  Starting from∗ ：	68.00 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Start Element ZA

  NABEYA

  It will be the spacer part of the Clamp Unit 7111 series. By combining various parts (base part and support part), the height can be changed to suit the workpiece.

  Select to compare

  Configure now
  Starting from∗ ：	719.07 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Start Element 7110FB

  NABEYA

  It will be the spacer part of the Clamp Unit 7112 series. By combining various parts (base part and support part), the height can be changed to suit the workpiece.

  Select to compare

  Configure now
  Starting from∗ ：	246.31 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Start Element 7110Z

  NABEYA

  EN 1.1191 Equiv. / hardened spacer element standard type.

  Select to compare

  Configure now
  Starting from∗ ：	519.38 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Draw Clamp

  NABEYA

  The workpiece is fixed in place by pulling it in from below. Minimal interference with the blade, ideal for 5-axis and composite machine clamps.

  Select to compare

  Configure now
  Starting from∗ ：	88.47 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Toggle Down Clamp 6833

  NABEYA

  Hold down toggle clamp 6833 made of EN 1.0038 Equiv. and zinc plating.

  Select to compare

  Configure now
  Starting from∗ ：	114.49 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Toggle Hook Clamp 6848H

  NABEYA

  6848HNI is made of stainless steel. The hook length can be adjusted.

  Select to compare

  Configure now
  Starting from∗ ：	108.89 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Helical Clamp

  NABEYA

  Achieve large fastening strength in restricted spaces. Can be used with two clamping methods.

  Select to compare

  Configure now
  Starting from∗ ：	111.42 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Universal Clamp Semi-Cylindrical Sealing Washer

  NABEYA

  [Features]
  · Parts for universal clamps.
  · The swivel pad fits on the workpiece and clamping surface for vertical tightening.
  · Although this product is equipped with T-nuts, it can also be used with them removed

  Select to compare

  Configure now
  Starting from∗ ：	17.29 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Heavy Duty Toggle Side Clamp 6842

  NABEYA

  Can be used for either pushing or pulling. Clamping screw and rubber cap attached.

  Select to compare

  Configure now
  Starting from∗ ：	184.17 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Atlas Screw Jack

  NABEYA

  Convenient for fixing workpieces thanks to its widened base and lengthened screw.

  Select to compare

  Configure now
  Starting from∗ ：	334.26 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Height Setting Jack

  NABEYA

  With a hole at the upper center. (φ12) E-756 Attachment for jack can be used in combination. Bearing is embedded in thread component.

  Select to compare

  Configure now
  Starting from∗ ：	455.41 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Clamp Bar for Nut Runner Clamp Large Model

  NABEYA

  A clamp bar for L-type nut runners. This product can be additionally processed by the customer.

  Select to compare

  Configure now
  Starting from∗ ：	117.75 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Ballpoint Jack

  NABEYA

  The point contact enables quick centering and support with black scale surfaces.

  Select to compare

  Configure now
  Starting from∗ ：	196.16 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Magnetic Jack

  NABEYA

  The main body has a built-in magnet and can be used for both horizontal and vertical machines. Lightweight as it is made of aluminum.

  Select to compare

  Configure now
  Starting from∗ ：	418.57 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

Loading...