Rejestracja
1
Warunki filtrowania

Wyczyść wszystko

  • Stan magazynowy
  • Application
  • Tip angle (θ)
    [60–160/1]
  • Tool Diameter (D)(mm)
  • work material
  • Tool Material Type
  • R Size (R)(mm)
  • CAD
  • Chamfering / Centering Tools (Coating Y/N: Available Strona 4)

    Chamfering/countersinking tools are tools used for grinding center holes, positioning holes, grinding holes, or deburring and rounding the edges after side-surface machining. They are attached to machine tools such as drill press, lathe, machining center, etc. Center drills are used to position the initial indentation on the work material to avoid misalignment of the drill bit tip. Their materials include alloy carbide, powdered high-speed steel, cobalt high-speed steel and high-speed steel. Countersinking and chamfering cutters are capable of chamfering after drilling holes. Chamfering cutters with a hole on the tip allow for smooth cutting discharge on soft work materials such as copper and aluminum. Center drills have a 90° tip angle and they can be used for positioning and chamfering at the same time.
    • Deburring EW100VR 495

        GUHRING

        Deburring EW100VR 495

        Capable of chamfering and deburring of hole entrances and exits by milling.
        Czytaj dalej
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Hole Chamfer903 ~ 12General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]Single blade-CarbideAvailableTiAlN
        Cena (bez VAT) od:
        103.41 €
        Standardowa data wysyłki:
        24 dni robocze
        Konfiguruj
      • NC Starting Drill for Positioning (125°) NC-SD

          YAMAWA MFG

          NC Starting Drill for Positioning (125°) NC-SD

          Stable high-precision positioning and chamfering is possible due to high rigidity design. Effective positioning even on difficult-to-machine curved surfaces and gentle slopes.
          Czytaj dalej
          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
          Centering (Positioning)601.5General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]Single bladeAvailableHigh-speed steelAvailable-
          Cena (bez VAT) od:
          23.51 €
          Standardowa data wysyłki:
          6 dni robocze
          Konfiguruj
        • NC Starting Drill for Chamfering (90°) NC-SD-V

            YAMAWA MFG

            NC Starting Drill for Chamfering (90°) NC-SD-V

            Stable high-precision positioning and chamfering is possible due to high rigidity design. Effective positioning even on difficult-to-machine curved surfaces and gentle slopes.
            Czytaj dalej
            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
            Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove905General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]Single bladeAvailableHigh-speed steelAvailable-
            Cena (bez VAT) od:
            29.54 €
            Standardowa data wysyłki:
            6 dni robocze
            Konfiguruj
          • TICN Coated Tongue Shank Point Drill PE-60° PE-SL-V
            • Volume Discount

            YAMAWA MFG

            TICN Coated Tongue Shank Point Drill PE-60° PE-SL-V

            Point Angle 125°, Chamfer Angle 60°The two angles allow simultaneous centering and chamfering. Two-stepped flat surface design allows good bite and achieves high machining precision.
            Czytaj dalej
            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
            Centering (Positioning) / Hole Chamfer125°6-Double-edgedN/AHigh-speed steelAvailableTiCN
            Cena (bez VAT) od:
            83.96 €
            Standardowa data wysyłki:
            6 dni robocze
            Konfiguruj
          • TICN Coated Point Drill PE - 60° PE - S - V

              YAMAWA MFG

              TICN Coated Point Drill PE - 60° PE - S - V

              Point Angle 125°, Chamfer Angle 60°The two angles allow simultaneous centering and chamfering. Two-stepped flat surface design allows good bite and achieves high machining precision.
              Czytaj dalej
              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
              Centering (Positioning) / Hole Chamfer125°12 ~ 20-Double-edgedN/AHigh-speed steelAvailableTiCN
              Cena (bez VAT) od:
              89.50 €
              Standardowa data wysyłki:
              6 dni robocze
              Konfiguruj
            • TICN Coated Point Drill PE - 90° PE - Q - V

                YAMAWA MFG

                TICN Coated Point Drill PE - 90° PE - Q - V

                Point Angle 125°, Chamfer Angle 90°The two angles allow simultaneous centering and chamfering. Two-stepped flat surface design allows good bite and achieves high machining precision.
                Czytaj dalej
                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                Centering (Positioning) / Hole Chamfer125°6 ~ 16General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]Double-edgedN/AHigh-speed steelAvailableTiCN
                Cena (bez VAT) od:
                43.09 €
                Standardowa data wysyłki:
                6 dni robocze
                Konfiguruj
              • TICN Coated Long Shank Point Drill PE 90° PE - QL - V

                  YAMAWA MFG

                  TICN Coated Long Shank Point Drill PE 90° PE - QL - V

                  Point Angle 125°, Chamfer Angle 90°The two angles allow simultaneous centering and chamfering. Two-stepped flat surface design allows good bite and achieves high machining precision.
                  Czytaj dalej
                  ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                  Centering (Positioning) / Hole Chamfer125°4 ~ 12--N/AHigh-speed steelAvailableTiCN
                  Cena (bez VAT) od:
                  79.85 €
                  Standardowa data wysyłki:
                  6 dni robocze
                  Konfiguruj
                • Counter Sink (For Drilling Machine 90°, 60°) CS-QM
                  • Volume Discount

                  YAMAWA MFG

                  Counter Sink (For Drilling Machine 90°, 60°) CS-QM

                  Is capable of high precision and stable machining of round hole chamfering and small screw, bolt attachment surface chamfering.
                  Czytaj dalej
                  ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                  Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove60-General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]Single bladeAvailableHigh-speed steelAvailable-
                  Cena (bez VAT) od:
                  19.76 €
                  Standardowa data wysyłki:
                  6 dni robocze
                  Konfiguruj
                • Titanium-Coated High Helix Groove A Type 60°, Center Hole Drills , CE - S - V

                    YAMAWA MFG

                    Titanium-Coated High Helix Groove A Type 60°, Center Hole Drills , CE - S - V

                    Suited for Center Hole Drilling in Soft and/or Sticky Materials
                    Czytaj dalej
                    ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                    Centering (Positioning) / Hole Chamfer60°4 ~ 10-Double-edgedN/AHigh-speed steelAvailableTiN
                    Cena (bez VAT) od:
                    26.95 €
                    Standardowa data wysyłki:
                    6 dni robocze
                    Konfiguruj
                  • Tang Shank Titanium Coating Strong Spiral Flute A Type 90°, Center Hole Drills, CE - Q - V

                      YAMAWA MFG

                      Tang Shank Titanium Coating Strong Spiral Flute A Type 90°, Center Hole Drills, CE - Q - V

                      Suited for Center Hole Drilling in Soft and/or Sticky Materials
                      Czytaj dalej
                      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                      Centering (Positioning) / Hole Chamfer90°6-Double-edgedN/AHigh-speed steelAvailableTiN
                      Cena (bez VAT) od:
                      31.64 €
                      Standardowa data wysyłki:
                      10 dni robocze
                      Konfiguruj
                    • Carbide Point Drill Joint Tool PE-90° C-PE-Q-V

                        YAMAWA MFG

                        Carbide Point Drill Joint Tool PE-90° C-PE-Q-V

                        Point Angle 125°, Chamfer Angle 90°The two angles allow simultaneous centering and chamfering. Two-stepped flat surface design allows good bite and achieves high machining precision.
                        Czytaj dalej
                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                        Centering (Positioning) / Hole Chamfer125°4-Double-edgedN/ACarbideAvailableTiAlN
                        Cena (bez VAT) od:
                        126.66 €
                        Standardowa data wysyłki:
                        6 dni robocze
                        Konfiguruj
                      • Titanium Coated Countersink 3 Flute Blade 90° CBN Polish

                          NOGAJAPAN

                          Titanium Coated Countersink 3 Flute Blade 90° CBN Polish

                          [Features]· Noga Titanium Coated Countersinks are made of heat-treated HSS with a CBN ground blade and titanium nitride coating.· The deep sharp blade and accurate cutting ensure high precision and excellent cutting performance.· Recommended for steel, cast items, non-ferrous metals, and light metals.· More effective at relatively slow cutting speeds (10 to 20 m/min).
                          Czytaj dalej
                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                          -906.3 ~ 31-Single blade-High-speed steelAvailableTiN
                          Cena (bez VAT) od:
                          57.10 €
                          Standardowa data wysyłki:
                          6 dni robocze
                          Konfiguruj
                        • Titanium Coated Countersink Set

                            NOGAJAPAN

                            Titanium Coated Countersink Set

                            [Features]· Noga Titanium Coated Countersinks are made of heat-treated HSS with a CBN ground blade and titanium nitride coating.· The deep sharp blade and accurate cutting ensure high precision and excellent cutting performance.· Recommended for steel, cast items, non-ferrous metals, and light metals.· More effective at relatively slow cutting speeds (10 to 20 m/min).
                            Czytaj dalej
                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                            ----Single blade-High-speed steelAvailableTiN
                            Cena (bez VAT) od:
                            407.98 €
                            Standardowa data wysyłki:
                            6 dni robocze
                            Konfiguruj
                          • Starting Drill GSS
                            • Volume Discount

                            EIKOSHA

                            Starting Drill GSS

                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                            Centering (Positioning) / Hole Chamfer / Drilling90 ~ 1353 ~ 25General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]--Cobalt HSSAvailableTiN
                            Cena (bez VAT) od:
                            22.30 €
                            Standardowa data wysyłki:
                            6 dni robocze
                            Konfiguruj
                          • Carbide Center Drill TiAℓ N KCDA-60

                              KYOWA SEIKO

                              Carbide Center Drill TiAℓ N KCDA-60

                              Both tip diameter and large diameter have torsional angle of 30°. Suppresses burrs and enables high-efficiency machining.
                              Czytaj dalej
                              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                              Centering (Positioning)120°0.3 ~ 3General Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]Double-edged-CarbideAvailableTiAlN
                              Cena (bez VAT) od:
                              88.28 €
                              Standardowa data wysyłki:
                              6 dni robocze
                              Konfiguruj
                            • Carbide Center Drill TiAℓ N KCDA-90
                              • Volume Discount

                              KYOWA SEIKO

                              Carbide Center Drill TiAℓ N KCDA-90

                              Both tip diameter and large diameter have torsional angle of 30°. Suppresses burrs and enables high-efficiency machining.
                              Czytaj dalej
                              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                              Centering (Positioning)120°0.3 ~ 3General Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]Double-edged-CarbideAvailableTiAlN
                              Cena (bez VAT) od:
                              88.28 €
                              Standardowa data wysyłki:
                              8 dni robocze
                              Konfiguruj
                            • TIN Coating, 3 Flute Chamfer Cutter, TIN-3MC (SKH51)

                                TAIYO-TOOL

                                TIN Coating, 3 Flute Chamfer Cutter, TIN-3MC (SKH51)

                                [Applications]· Hole chamfer[Single Blade / Double Blade]· Single blade[Tool Grade]· High-speed steel[Coating Y/N] Y[Coating Type] TiN
                                Czytaj dalej
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Hole Chamfer60 ~ 12016 ~ 46-Single blade-High-speed steelAvailableTiN
                                Cena (bez VAT) od:
                                82.99 €
                                Standardowa data wysyłki:
                                6 dni robocze
                                Konfiguruj
                              • SPEED / T, 2-Flute, Multi 90°

                                  SPEED TIGER

                                  SPEED / T, 2-Flute, Multi 90°

                                  [Features]· Blade diameters φ10 or less are high rigidity types with thick shank diameter.· A high-lubricity AlTiN coated tool that is ideal for soft materials with a hardness of HRC 45 or less, such as raw materials or stainless steel. Handy to have one in a magazine rack.
                                  Czytaj dalej
                                  ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                  Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove903 ~ 20General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]Double-edgedAvailable-AvailableOther
                                  Cena (bez VAT) od:
                                  40.76 €
                                  Standardowa data wysyłki:
                                  8 dni robocze
                                  Konfiguruj
                                • Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X

                                    7 LEADERS

                                    Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X

                                    [Features]· 90° Carbide 2-Flute Chamfering V-Grooving End Mill· Use for V-grooving, horizontal chamfering, centering, hole chamfering.· Nanoparticle Multilayer Coating· Excellent lubricity and abrasion resistance.· Suitable for a wide range of work materials from general steel to aluminum.
                                    Czytaj dalej
                                    ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                    Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove900.5 ~ 20General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]--CarbideAvailableOther
                                    Cena (bez VAT) od:
                                    50.08 €
                                    Standardowa data wysyłki:
                                    6 dni robocze
                                    Konfiguruj
                                  • Chamfering Cutter NC Spot Drill (Chip)

                                      NINE9

                                      Chamfering Cutter NC Spot Drill (Chip)

                                      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                      -145+90-----AvailableTiAlN
                                      Cena (bez VAT) od:
                                      78.20 €
                                      Standardowa data wysyłki:
                                      6 dni robocze
                                      Konfiguruj
                                    • FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series
                                      • Volume Discount

                                      OSG

                                      FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series

                                      High-speed cutting is possible compared to conventional products, and a wide range of processing such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High-speed steel series and carbide series are available.
                                      Czytaj dalej
                                      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                      Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove901 ~ 3.8General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]Single bladeN/ACarbideAvailableTiAlN
                                      Cena (bez VAT) od:
                                      119.56 €
                                      Standardowa data wysyłki:
                                      6 dni robocze
                                      Konfiguruj
                                    • V Coat XPM 2-Flute Short (V-Cut Type) V-XPM-VCMS
                                      • Volume Discount

                                      OSG

                                      V Coat XPM 2-Flute Short (V-Cut Type) V-XPM-VCMS

                                      [Specifications]· Shanks with diameter 25 mm or more are shanks with 2 flattened cutouts.
                                      Czytaj dalej
                                      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                      -8X60° ~ 12X120°--Single bladeAvailablePowder high-speed steelAvailableOther
                                      Cena (bez VAT) od:
                                      84.71 €
                                      Standardowa data wysyłki:
                                      6 dni robocze
                                      Konfiguruj
                                    • TiN Coating, Long Shank TIN-LS-NC-LDS
                                      • Volume Discount

                                      OSG

                                      TiN Coating, Long Shank TIN-LS-NC-LDS

                                      [Specifications]· Tip angle tolerance is 90° ±1°.
                                      Czytaj dalej
                                      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                      -9012-Single bladeAvailableHigh-speed steelAvailableTiN
                                      Cena (bez VAT) od:
                                      94.89 €
                                      Standardowa data wysyłki:
                                      6 dni robocze
                                      Konfiguruj
                                    • WATERMILLS ® 3-Flute Countersink WMC5TA 90° 5% Cobalt High-Speed Steel + TiAlN Coating

                                        WATERMILLS

                                        WATERMILLS ® 3-Flute Countersink WMC5TA 90° 5% Cobalt High-Speed Steel + TiAlN Coating

                                        [Features] It has 3 flutes.Applications: Hole chamfering Tip angle (θ): 90°Coating type: TiAIN
                                        Czytaj dalej
                                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                        Hole Chamfer90°4.3 ~ 31-Single blade-Cobalt HSSAvailableTiAlN
                                        Cena (bez VAT) od:
                                        41.77 €
                                        Standardowa data wysyłki:
                                        8 dni robocze
                                        Konfiguruj
                                      • WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N

                                          OSG

                                          WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N

                                          [Features]· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining. The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing. Significantly reduces turning-back, or burring. Excellent chip discharge.
                                          Czytaj dalej
                                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                          Chamfering/Horizontal90°-General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]Single bladeN/ACarbideAvailable-
                                          Cena (bez VAT) od:
                                          79.82 €
                                          Standardowa data wysyłki:
                                          6 dni robocze
                                          Konfiguruj
                                        • Crystal Center Drill ZH330-TiN

                                            RYOKO SEIKI

                                            Crystal Center Drill ZH330-TiN

                                            [Features]· TiN coating is a highly reliable and versatile coating.· The surface hardness is HV2,000 to 2,200, the heat-resistance temperature is around 500°C and the friction coefficient is 0.4
                                            Czytaj dalej
                                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                            Centering (Positioning)60 × 1200.8-Double-edgedN/ACarbideAvailableTiN
                                            Cena (bez VAT) od:
                                            121.06 €
                                            Standardowa data wysyłki:
                                            6 dni robocze
                                            Konfiguruj
                                          • WXL-Coated Chamfering Cutter Positive Type Regular W-HSCT-P

                                              OSG

                                              WXL-Coated Chamfering Cutter Positive Type Regular W-HSCT-P

                                              [Features]· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining. The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing. Significantly reduces turning-back, or burring. Excellent chip discharge.
                                              Czytaj dalej
                                              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                              ---General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]--CarbideAvailableOther
                                              Cena (bez VAT) od:
                                              79.82 €
                                              Standardowa data wysyłki:
                                              6 dni robocze
                                              Konfiguruj
                                            • WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P

                                                OSG

                                                WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P

                                                [Features]· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining. The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing. Significantly reduces turning-back, or burring. Excellent chip discharge.
                                                Czytaj dalej
                                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                ---General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]--CarbideAvailableOther
                                                Cena (bez VAT) od:
                                                84.46 €
                                                Standardowa data wysyłki:
                                                6 dni robocze
                                                Konfiguruj
                                              • WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N

                                                  OSG

                                                  WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N

                                                  [Features]· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining. The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing. Significantly reduces turning-back, or burring. Excellent chip discharge.
                                                  Czytaj dalej
                                                  ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                  ---General Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]--CarbideAvailableOther
                                                  Cena (bez VAT) od:
                                                  84.46 €
                                                  Standardowa data wysyłki:
                                                  6 dni robocze
                                                  Konfiguruj
                                                • MUGEN Coating C Chamfer Cutter NSCV-M

                                                    NS TOOL

                                                    MUGEN Coating C Chamfer Cutter NSCV-M

                                                    [Features]· Enables easy C chamfering.· Uses MUGEN coating that dramatically improves the durability.
                                                    Czytaj dalej
                                                    ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                    Chamfering/Horizontal45°4 ~ 6General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]Single bladeAvailableCarbideAvailableTiAlN
                                                    Cena (bez VAT) od:
                                                    106.80 €
                                                    Standardowa data wysyłki:
                                                    6 dni robocze
                                                    Konfiguruj
                                                  • V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60°

                                                      MAKOTOLOY

                                                      V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60°

                                                      [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Standard type.
                                                      Czytaj dalej
                                                      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                      Hole Chamfer / Chamfering/Horizontal601 ~ 20General Steel[○] / Cast Iron[○] / Aluminum[○]Single blade-CarbideAvailableTiAlN
                                                      Cena (bez VAT) od:
                                                      120.85 €
                                                      Standardowa data wysyłki:
                                                      8 dni robocze
                                                      Konfiguruj
                                                    • V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90°

                                                        MAKOTOLOY

                                                        V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90°

                                                        [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Standard type.
                                                        Czytaj dalej
                                                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                        Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling901 ~ 20General Steel[○] / Cast Iron[○] / Aluminum[○]Single blade-CarbideAvailableTiAlN
                                                        Cena (bez VAT) od:
                                                        120.85 €
                                                        Standardowa data wysyłki:
                                                        8 dni robocze
                                                        Konfiguruj
                                                      • V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°

                                                          MAKOTOLOY

                                                          V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°

                                                          [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Standard type.
                                                          Czytaj dalej
                                                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                          Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling1201 ~ 20General Steel[○] / Cast Iron[○] / Aluminum[○]Single blade-CarbideAvailableTiAlN
                                                          Cena (bez VAT) od:
                                                          120.85 €
                                                          Standardowa data wysyłki:
                                                          8 dni robocze
                                                          Konfiguruj
                                                        • V-Cut Carbide End Mills, Long Type, Coated Series AMVL 60°

                                                            MAKOTOLOY

                                                            V-Cut Carbide End Mills, Long Type, Coated Series AMVL 60°

                                                            [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Long type.
                                                            Czytaj dalej
                                                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                            Hole Chamfer / Chamfering/Horizontal603 ~ 20General Steel[○] / Cast Iron[○] / Aluminum[○]Single blade-CarbideAvailableTiAlN
                                                            Cena (bez VAT) od:
                                                            129.08 €
                                                            Standardowa data wysyłki:
                                                            6 dni robocze
                                                            Konfiguruj
                                                          • V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°

                                                              MAKOTOLOY

                                                              V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°

                                                              [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Long type.
                                                              Czytaj dalej
                                                              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                              Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling903 ~ 20General Steel[○] / Cast Iron[○] / Aluminum[○]Single blade-CarbideAvailableTiAlN
                                                              Cena (bez VAT) od:
                                                              129.08 €
                                                              Standardowa data wysyłki:
                                                              8 dni robocze
                                                              Konfiguruj
                                                            • Carbide V Cut End Mill Long Type Coated Series AMVL 120°

                                                                MAKOTOLOY

                                                                Carbide V Cut End Mill Long Type Coated Series AMVL 120°

                                                                [Features]· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.· An ultra-fine particle carbide alloy is used for the carbide material.· Long tool life, improved cutting speed and reduced machining time.· Long type.
                                                                Czytaj dalej
                                                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling1203 ~ 20General Steel[○] / Cast Iron[○] / Aluminum[○]Single blade-CarbideAvailableTiAlN
                                                                Cena (bez VAT) od:
                                                                129.08 €
                                                                Standardowa data wysyłki:
                                                                8 dni robocze
                                                                Konfiguruj
                                                              • V-Cut Small Diameter Carbide End Mills Coated Series AMVS 60°

                                                                  MAKOTOLOY

                                                                  V-Cut Small Diameter Carbide End Mills Coated Series AMVS 60°

                                                                  [Features]· A small but high quality end mill that can also be used with high precision machining technology.
                                                                  Czytaj dalej
                                                                  ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                  Hole Chamfer / Chamfering/Horizontal600.3 ~ 0.9General Steel[○] / Cast Iron[○] / Aluminum[○]Single blade-CarbideAvailableTiAlN
                                                                  Cena (bez VAT) od:
                                                                  113.67 €
                                                                  Standardowa data wysyłki:
                                                                  8 dni robocze
                                                                  Konfiguruj
                                                                • V-Cut Small Diameter Carbide End Mills Coated Series AMVS 90°

                                                                    MAKOTOLOY

                                                                    V-Cut Small Diameter Carbide End Mills Coated Series AMVS 90°

                                                                    [Features]· A small but high quality end mill that can also be used with high precision machining technology.
                                                                    Czytaj dalej
                                                                    ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                    Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling900.3 ~ 0.9General Steel[○] / Cast Iron[○] / Aluminum[○]Single blade-CarbideAvailableTiAlN
                                                                    Cena (bez VAT) od:
                                                                    113.67 €
                                                                    Standardowa data wysyłki:
                                                                    8 dni robocze
                                                                    Konfiguruj
                                                                  • V-Cut Small Diameter Carbide End Mills Coated Series AMVS 120°

                                                                      MAKOTOLOY

                                                                      V-Cut Small Diameter Carbide End Mills Coated Series AMVS 120°

                                                                      [Features]· A small but high quality end mill that can also be used with high precision machining technology.
                                                                      Czytaj dalej
                                                                      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                      Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling1200.3 ~ 0.9General Steel[○] / Cast Iron[○] / Aluminum[○]Single blade-CarbideAvailableTiAlN
                                                                      Cena (bez VAT) od:
                                                                      113.67 €
                                                                      Standardowa data wysyłki:
                                                                      8 dni robocze
                                                                      Konfiguruj
                                                                    • V Spot Carbide Drill, Standard Type, TiN Coat, 90°

                                                                        MAKOTOLOY

                                                                        V Spot Carbide Drill, Standard Type, TiN Coat, 90°

                                                                        [Features]· Higher positioning precision than normal twist drills thanks to the small chisel edge.· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.· The type with a 90° tip angle is capable of performing centering and chamfering simultaneously.
                                                                        Czytaj dalej
                                                                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                        Centering (Positioning) / Hole Chamfer903 ~ 25General Steel[○] / Cast Iron[○] / Aluminum[○]Single blade-CarbideAvailableTiN
                                                                        Cena (bez VAT) od:
                                                                        106.57 €
                                                                        Standardowa data wysyłki:
                                                                        8 dni robocze
                                                                        Konfiguruj
                                                                      • V Spot Carbide Drill, Standard Type, TiN Coat, 120°

                                                                          MAKOTOLOY

                                                                          V Spot Carbide Drill, Standard Type, TiN Coat, 120°

                                                                          [Features]· Higher positioning precision than normal twist drills thanks to the small chisel edge.· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.
                                                                          Czytaj dalej
                                                                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                          Centering (Positioning) / Hole Chamfer1203 ~ 25General Steel[○] / Cast Iron[○] / Aluminum[○]Single blade-CarbideAvailableTiN
                                                                          Cena (bez VAT) od:
                                                                          106.57 €
                                                                          Standardowa data wysyłki:
                                                                          8 dni robocze
                                                                          Konfiguruj
                                                                        • V Spot Carbide Drill, Long Type, TiN Coat, 90°

                                                                            MAKOTOLOY

                                                                            V Spot Carbide Drill, Long Type, TiN Coat, 90°

                                                                            [Features]· Higher positioning precision than normal twist drills thanks to the small chisel edge.· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.· The type with a 90° tip angle is capable of performing centering and chamfering simultaneously.
                                                                            Czytaj dalej
                                                                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                            Centering (Positioning) / Hole Chamfer903 ~ 25General Steel[○] / Cast Iron[○] / Aluminum[○]Single blade-CarbideAvailableTiN
                                                                            Cena (bez VAT) od:
                                                                            139.74 €
                                                                            Standardowa data wysyłki:
                                                                            8 dni robocze
                                                                            Konfiguruj
                                                                          • V Spot Carbide Drill, Long Type, TiN Coat, 120°

                                                                              MAKOTOLOY

                                                                              V Spot Carbide Drill, Long Type, TiN Coat, 120°

                                                                              [Features]· Higher positioning precision than normal twist drills thanks to the small chisel edge.· Made using carefully selected carbides with a TiN coating, ensuring a long tool life.
                                                                              Czytaj dalej
                                                                              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                              Centering (Positioning) / Hole Chamfer1203 ~ 25General Steel[○] / Cast Iron[○] / Aluminum[○]Single blade-CarbideAvailableTiN
                                                                              Cena (bez VAT) od:
                                                                              139.74 €
                                                                              Standardowa data wysyłki:
                                                                              8 dni robocze
                                                                              Konfiguruj
                                                                            • Mini Corner Rounding Cutter, Carbide C-CRC-V

                                                                                THE CUT

                                                                                Mini Corner Rounding Cutter, Carbide C-CRC-V

                                                                                [Features]· Ideal for CNC machining.· Capable of machining extremely thin workpieces.· Simple regrinding/repolishing.
                                                                                Czytaj dalej
                                                                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                                Round Chamfer-2 ~ 2.5General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]Single blade-CarbideAvailableTiAlN
                                                                                Cena (bez VAT) od:
                                                                                123.62 €
                                                                                Standardowa data wysyłki:
                                                                                6 dni robocze
                                                                                Konfiguruj
                                                                              • V Men-Maru C-MPE-V

                                                                                  THE CUT

                                                                                  V Men-Maru C-MPE-V

                                                                                  [Features]· Capable of chamfering, side surface machining, etc. For models with a tip angle of 90° or 120°, work such as V-grooving, hole drilling and centering can all be done without the use of additional tools.· Sharp cutting edge with a helix angle of 40°. Boasts good cutting chip discharge, delivering excellent cutting performance.· Ultra-fine particle carbide with a TiAlN coating for high rigidity, excellent wear resistance and a significantly longer tool life.
                                                                                  Czytaj dalej
                                                                                  ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                                  Centering (Positioning) / Chamfering/Horizontal / V Groove / Drilling / Other9010General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○]Single blade-CarbideAvailableTiAlN
                                                                                  Cena (bez VAT) od:
                                                                                  185.51 €
                                                                                  Standardowa data wysyłki:
                                                                                  6 dni robocze
                                                                                  Konfiguruj