Chamfer, V-Grooves（work material：Stainless Steel）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
TS coated carbide chamfer, V grooving end mill, 2-flute
MISUMI
[Features]
-Ideal for chamfers and V-grooves
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application methods, performance range, prices, delivery times, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Configure nowStarting from∗ ： 71.59 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
High Speed Chamfering Series, V-Coated XPM 2-Flute Chamfering Cutters
OSG
By adopting of sharp high helix, clean working surface with less burr can be obtained.- Volume Discount
Configure nowStarting from∗ ： 44.76 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Leading Drills, TIN-NC-LDS
OSG
TiN Coating Makes Possible Higher Speed and Longer Life than NC-LDS- Volume Discount
Configure nowStarting from∗ ： 21.10 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 59.45 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade
MISUMI
The helix flute suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.- Volume Discount
- TS
- SUS
- 2 Flutes
Configure nowStarting from∗ ： 74.67 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type
MISUMI
[Features]
・Popular 3-flute type for helix angle chambering with high feed rate.
・Ideal for chamfering.(V-groove machining is not possible because there is no cutting edge at the tip)
・Since it has an outer peripheral flute, it can perform inclined contours and helical cutting.
・With the 3-flute shape, the feed can be increased up to 1.5 times that of the 2-flute type.
・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible.
・It can also be used as a deburring tool.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 41.90 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
Carbide Chamfering Cutter KMC-2
KYOWA SEIKO
[Features] It can be used for chamfering and horizontal machining. [Features] By using carbide materials with high hardness, it can be used for cutting general steel, heat-treated steel, stainless steel, cast iron and aluminium.- Volume Discount
Configure nowStarting from∗ ： 42.95 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Carbide Inversed Chamfering Cutter KUMW-4
KYOWA SEIKO
4 straight cutting edges.
90° (including angle type)
Working material, General steel/Heat treated steel/Stainless steel/Cast iron/Aluminium/Copper/Resin
Single-edged blade
Tool quality, carbide.Configure nowStarting from∗ ： 109.96 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X
7 LEADERS
[Features]
· 90° Carbide 2-Flute Chamfering V-Grooving End Mill
· Use for V-grooving, horizontal chamfering, centering, hole chamfering.
· Nanoparticle Multilayer Coating
· Excellent lubricity and abrasion resistance.
· Suitable for a wide range of work materials from general steel to aluminum.Configure nowStarting from∗ ： 47.28 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MUGEN Coating C Chamfer Cutter NSCV-M
NS TOOL
[Features]
· Enables easy C chamfering.
· Uses MUGEN coating that dramatically improves the durability.Configure nowStarting from∗ ： 111.08 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model
MISUMI
Ideal for the Deep Chamfering of Workpieces- Volume Discount
- TS
- General Steel
- 2 Flutes
Configure nowStarting from∗ ： 48.89 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TS coated carbide chamfering end mill, 2-flute / 15° spiral
MISUMI
[Features]
-The hard-to-machine flute tip and the shape that facilitates chip evacuation allow machining from positioning ( = centering) to chamfering with a single tool
-The coating has high oxidation resistance and high hardness and achieves long tool life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Configure nowStarting from∗ ： 42.10 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TS coated carbide chamfering end mill, 2-flute / short model
MISUMI
[Features]
-Ideal for chamfering. Can also be used as a deburring tool
-Since it has circumferential grooves, it is possible to perform bevel, contour and oblique cutting
-Since the circumferential grooves have a bevel angle, it is possible to machine as shown in the figure above
-It has a coating with high oxidation resistance and high hardness, and achieves a long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for how to use the product, its performance, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Configure nowStarting from∗ ： 38.81 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TS coated carbide chamfering end mill, 3-flute / short model
MISUMI
[Features]
-Ideal for chamfering (V-groove is not possible as the tip has no cutting groove).
-Peripheral grooves allow bevel, contour and spiral cutting
-The 3-groove shape allows feed rate improvement to the 1st step. The 3-flute shape enables up to 1.5 times the feed rate compared to the 2-flute type
-With helix angle on peripheral flutes
-Can also be used as a deburring tool
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Configure nowStarting from∗ ： 46.59 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TS coated carbide inner R-cutter, 2-flute
MISUMI
[Features]
Easy high-quality machining of corner radii
-It has a coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.- Volume Discount
- TS
- General Steel
- 2 Flutes
Configure nowStarting from∗ ： 50.04 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide inner R-cutter, 2-flute
MISUMI
Achieves the easy and high-quality processing of the corner R with the extensive 20 sizes- Volume Discount
- Non-Coated
- General Steel
- 2 Flutes
Configure nowStarting from∗ ： 49.42 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short
MISUMI
The chamfer angle can be selected from 60, 90 and 120°according to the machining style- Volume Discount
- TiCN
- 2 Flutes
- S (Short)
Configure nowStarting from∗ ： 57.90 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type
MISUMI
[Features]
・MISUMI's original inner radius cutter specialized for machining high hardness steel.
・Ideal for high hardness steel inner radius machining up to 65 HRC.
・High-efficiency machining is possible by adopting a 4-flute shape.
・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.
・The finish of the surface roughness of the workpiece after machining is very good.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 74.16 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type
MISUMI
[Features]
・Popular chamfering product with helix angle.
・Since it has a peripheral flute, it can be used for tilting, contouring and helical cutting.
・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible. It can also be used as a deburring tool.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 37.62 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle
MISUMI
[Features]
・Machining from positioning to chamfering with a single tool.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 42.61 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Chamfer End Mill 2-Flute
MISUMI
[Features]
・Recommended for chamfering general steel.
・Ideal for chamfering and V-groove machining.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 32.62 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type
MISUMI
[Features]
・Recommended for deep section chamfering of general steel.
・Ideal for chamfering and V-groove machining.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
・The long type is ideal for deep cavity milling.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 43.97 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Inner Radius Cutter, 2-Flute
MISUMI
[Features]
・An essential item for corner rounding.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 50.04 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type
MISUMI
[Features]
・The popular high hardness steel chamfer end mill is even more affordable.
・Ideal for chamfering high hardness steel up to 65 HRC. (V-groove machining is not possible because there is no cutting edge at the tip)
・High-efficiency machining is possible by adopting a 6-flute shape.
・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.
・The finish of the surface roughness of the workpiece after machining is very good.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 42.86 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 17.24 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
2-Flute Corner, Rounding Shape, FX-ECR
OSG
Specialized R chamfering tools. As high toughness cemented carbide alloy was used as the base material, it is able to handle a wide range of workpieces.- Volume Discount
Configure nowStarting from∗ ： 61.45 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
3-Flute, Chamfering Cutter (Negative Type) HSCT-N
OSG
End mill for negative chamfering. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.- Volume Discount
Configure nowStarting from∗ ： 73.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
3-Flute, Chamfering Cutter (Positive Type) HSCT-P
OSG
End mill for positive chamfering. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.- Volume Discount
Configure nowStarting from∗ ： 73.51 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
3-Flute Long Shank Chamfering Cutter (Negative Type) LS-HSCT-N
OSG
End mill for negative chamfering, long shank type. It suppresses chatter during machining and has good chip evacuation for a nice surface finish.- Volume Discount
Configure nowStarting from∗ ： 78.36 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
3-Flute Long Shank Chamfering Cutter (Positive Type) LS-HSCT-P
OSG
Positive chamfer cutter with long shank. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.- Volume Discount
Configure nowStarting from∗ ： 78.36 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Chamfering Cutter for SV Chamfering Process
UNION TOOL
[Features]
· Carbide spiral chamfering cutter
· Half Taper Angle of 45°
· The external blade is a torsion type that limits the occurrence of burrs when compared with the straight blade type.Configure nowStarting from∗ ： 135.77 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Hole Chamfering Leading Drill V Coating Powder HSS Long Shank
OSG
Leading long shank drill with powder metal high speed steel XPM as base material, with 90° V-coated point angle. Ideal for chamfering deep parts.Configure nowStarting from∗ ： 23.64 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Solid Chamfering End Mill 3-Flute
DIXI
High rigidity, high precision, compact chisel structure enables high precision positioning, accurate positioning on curved and sloped surfaces, and high-quality chamfering.Configure nowStarting from∗ ： 75.30 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
SAGCCC SA Coated Carbide for Center Chamfering
SANKO MFG
Center chamfering cutter with TiAlN coating. Double angle adopted for the chamfer part.Configure nowStarting from∗ ： 123.10 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
GCCC for Carbide Center Chamfering
SANKO MFG
[Features]
· Melding the design concepts of endmills and drills, it is available for a wide range of applications.
· Double angle adopted for the chamfer part.
· Provides a clean finish with fewer burrs.Configure nowStarting from∗ ： 101.59 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Angular Cutter with TAG Handle G2
ASAHI TOOLS
Brazed Shape Milling Cutter for Dovetail Grooving Can be used for thinning hole processing and the like at the bottom of the table grooveConfigure nowStarting from∗ ： 162.11 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CMC MC Chamfering Cutter G2
ASAHI TOOLS
Soldering shape, Angle tolerance ±15'.
Shape accuracy with straight edge.
Applications, Hole chamfering/bevelling/horizontal run Work material, General steel/heat treated steel/stainless steel/cast iron/aluminium/copper/resin
Single-edged blade
2 blades.Configure nowStarting from∗ ： 113.60 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CS2S Type II Chamfering Cutter (Single Flute), Straight Shank
OKAZAKI SEIKO
1-flute type. For steel and stainless steel. All products are TiN coated.- Volume Discount
Configure nowStarting from∗ ： 371.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
CS3S Type III Chamfering Cutter (3-Flute), Straight Shank
OKAZAKI SEIKO
3-flute type. For steel and stainless steel. All products are TiN coated.- Volume Discount
Configure nowStarting from∗ ： 102.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SVM Chamfering Mill, Non-Coated
OKAZAKI SEIKO
In addition to hole chamfering, it can be used for transverse feed cutting such as V-groove machining and C-surface machining.- Volume Discount
Configure nowStarting from∗ ： 83.38 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
SVMA Chamfering Mill, OK Coated
OKAZAKI SEIKO
In addition to hole chamfering, it can be used for transverse feed cutting such as V-groove machining and C-surface machining.Configure nowStarting from∗ ： 104.53 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Carbide Inversed Chamfering Cutter KUMC-4
KYOWA SEIKO
4 straight cutting edges.
45° (one-sided angle)
Material, general steel/heat-treated steel/stainless steel/cast iron/aluminium
Single-edged blade
Tool grade, carbideConfigure nowStarting from∗ ： 109.96 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 116.87 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 117.96 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
SPEED / T, 2-Flute, Multi 90°
SPEED TIGER
[Features]
· Blade diameters φ10 or less are high rigidity types with thick shank diameter.
· A high-lubricity AlTiN coated tool that is ideal for soft materials with a hardness of HRC 45 or less, such as raw materials or stainless steel. Handy to have one in a magazine rack.Configure nowStarting from∗ ： 42.39 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Application |
| Tip angle (θ) |
| Tool Diameter (D)(mm) |
| work material |
| Single blade, two blades |
| Peripheral Blade Y/N |
| Tool Material Type |
| Coating Y/N |
| Coating Type |
| R Size (R)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | OSG | OSG | SANDVIK | MISUMI | MISUMI | KYOWA SEIKO | KYOWA SEIKO | 7 LEADERS | NS TOOL | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OSG | OSG | OSG | OSG | OSG | OSG | UNION TOOL | OSG | DIXI | SANKO MFG | SANKO MFG | ASAHI TOOLS | ASAHI TOOLS | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | OKAZAKI SEIKO | KYOWA SEIKO | SANDVIK | SANDVIK | SPEED TIGER |
| Product Series | High Speed Chamfering Series, V-Coated XPM 2-Flute Chamfering Cutters | SANDVIK CoroMill Plura Solid Carbide End Mill for Chamfer Milling | TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade | TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model | TS coated carbide chamfering end mill, 2-flute / short model | TS coated carbide chamfering end mill, 3-flute / short model | TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short | XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type | XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle | XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type | XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type | 3-Flute Long Shank Chamfering Cutter (Negative Type) LS-HSCT-N | 3-Flute Long Shank Chamfering Cutter (Positive Type) LS-HSCT-P | Hole Chamfering Leading Drill V Coating Powder HSS Long Shank | CS2S Type II Chamfering Cutter (Single Flute), Straight Shank | CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank | CoroMill Plura General-Purpose End Mill For Round Chamfering, 1U000 | ||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||
| Starting from∗ | 71.59 € *Unit price with basic configuration Volume Discount | 44.76 € *Unit price with basic configuration Volume Discount | 21.10 € *Unit price with basic configuration Volume Discount | 59.45 € *Unit price with basic configuration | 74.67 € *Unit price with basic configuration Volume Discount | 41.90 € *Unit price with basic configuration Volume Discount | 42.95 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 109.96 € *Unit price with basic configuration | 47.28 € *Unit price with basic configuration | 111.08 € *Unit price with basic configuration | 48.89 € *Unit price with basic configuration Volume Discount | 42.10 € *Unit price with basic configuration Volume Discount | 38.81 € *Unit price with basic configuration Volume Discount | 46.59 € *Unit price with basic configuration Volume Discount | 50.04 € *Unit price with basic configuration Volume Discount | 49.42 € *Unit price with basic configuration Volume Discount | 57.90 € *Unit price with basic configuration Volume Discount | 74.16 € *Unit price with basic configuration Volume Discount | 37.62 € *Unit price with basic configuration Volume Discount | 42.61 € *Unit price with basic configuration Volume Discount | 32.62 € *Unit price with basic configuration Volume Discount | 43.97 € *Unit price with basic configuration Volume Discount | 50.04 € *Unit price with basic configuration Volume Discount | 42.86 € *Unit price with basic configuration Volume Discount | 17.24 € *Unit price with basic configuration | 61.45 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 73.17 € *Unit price with basic configuration Volume Discount | 73.51 € *Unit price with basic configuration Volume Discount | 78.36 € *Unit price with basic configuration Volume Discount | 78.36 € *Unit price with basic configuration Volume Discount | 135.77 € *Unit price with basic configuration | 23.64 € *Unit price with basic configuration | 75.30 € *Unit price with basic configuration | 123.10 € *Unit price with basic configuration | 101.59 € *Unit price with basic configuration | 162.11 € *Unit price with basic configuration | 113.60 € *Unit price with basic configuration | 371.94 € *Unit price with basic configuration Volume Discount | 102.41 € *Unit price with basic configuration Volume Discount | 83.38 € *Unit price with basic configuration Volume Discount | 104.53 € *Unit price with basic configuration | 109.96 € *Unit price with basic configuration | 116.87 € *Unit price with basic configuration | 117.96 € *Unit price with basic configuration | 42.39 € *Unit price with basic configuration |
| Min. Shipping Days | 5 Days | 6 Days | 6 Days | 5 Days | 5 Days | 5 Days | Same day | 8 Days | 6 Days | 6 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 7 Days | 6 Days | 8 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | 8 Days | 8 Days | 6 Days | 8 Days | 7 Days |
| Specifications |
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||
| Application | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer | - | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Chamfering/Horizontal | Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Round Chamfer | Round Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Round Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | - | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer | Round Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Hole Chamfer / Chamfering/Horizontal / Round Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Chamfering/Horizontal | Hole Chamfer / Chamfering/Horizontal | Hole Chamfer | Hole Chamfer | Hole Chamfer / Chamfering/Horizontal / V Groove | Hole Chamfer / Chamfering/Horizontal / V Groove | Chamfering/Horizontal | Chamfering/Horizontal | Chamfering/Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove |
| Tip angle (θ) | 60 ～ 120 | - | 60 ～ 120 | - | 90 | - | 90° | - | 90 | 45° | 90 | 90 | 60 ～ 120 | 90 | - | - | 60 ～ 120 | - | - | - | - | - | - | - | 90 | - | 90 | 90 | 90 | 90 | 90 | 90 | 90 | - | - | 45° ～ 60° | 60 ～ 90 | 90 | 90 | 90 ～ 120 | 90 ～ 120 | - | 90° | - | 90 |
| Tool Diameter (D)(mm) | 3 ～ 16 | - | 3 ～ 25 | 3.17 ～ 20 | 3 ～ 12 | - | 0.3 ～ 4 | - | 0.5 ～ 20 | 4 ～ 6 | 3 ～ 12 | 3 ～ 12 | 3 ～ 12 | 3 ～ 12 | - | - | 10 ～ 25 | - | - | - | - | - | - | - | 3 ～ 25 | 0.5 ～ 1.5 | 1 ～ 2 | 1 ～ 2 | 1 ～ 2 | 1 ～ 2 | 0.8 ～ 1 | 3 ～ 25 | 2 ～ 12 | 3 ～ 20 | 3 ～ 20 | 15 ～ 100 | 10 ～ 60 | 66 | 20 | 3 ～ 20 | 3 ～ 20 | - | 8 ～ 12 | 6 ～ 20 | 3 ～ 20 |
| work material | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] |
| Single blade, two blades | Single blade | Single blade | Single blade | - | Single blade | Single blade | Single blade | Single blade | - | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | - | - | - | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Double-edged |
| Peripheral Blade Y/N | N/A | N/A | N/A | - | N/A | Available | - | - | - | Available | Available | N/A | Available | Available | N/A | N/A | Available | N/A | Available | N/A | N/A | Available | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | Available | - | Available | Available | Available | Available | N/A | N/A | Available | Available | - | N/A | N/A | Available |
| Tool Material Type | Carbide | Powder high-speed steel | High-speed steel | - | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Powder high-speed steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Powder high-speed steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Powder high-speed steel | Carbide | Carbide | Carbide | Carbide | Carbide | Cobalt HSS | Cobalt HSS | Carbide | Carbide | Carbide | Carbide | Carbide | - |
| Coating Y/N | Available | Available | Available | - | Available | Available | N/A | N/A | Available | Available | Available | Available | Available | Available | Available | N/A | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | N/A | N/A | N/A | N/A | N/A | Available | Available | Available | N/A | N/A | N/A | Available | Available | N/A | Available | N/A | Available | N/A | Available |
| Coating Type | TS | TiCN | TiN | - | TS | AlCrN | - | - | Other | TiAlN | TS | TS | TS | TS | TS | - | - | AlCrN | AlCrN | AlCrN | AlCrN | AlCrN | AlCrN | TS | TiCN | TiAlN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | - | TiCN | TiAlN | TiAlN | Non-Coated | Non-Coated | Non-Coated | TiN | TiN | Non-Coated | TiAlN | - | Other | - | Other |
| R Size (R)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.1 ～ 5 | 0.2 ～ 5 | - | - | - | - | - | - | - | - | - | 0.1 ～ 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Application
-
Tip angle (θ)
-
Tool Diameter (D)(mm)
- 0 to 2
- 0.1
- 0.2
- 0.3
- 0.3, 0.6
- 0.4
- 0.5
- 0.5, 1
- 0.6
- 0.7
- 0.8
- 0.9
- 1
- 1, 2
- 1.2
- 1.5
- 1.6
- 1.8
- 2
- 2.4
- 2.5
- 2.6
- 2.8
- 3
- 3.17
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.8
- 4
- 4.2
- 4.4
- 4.5
- 4.6
- 4.8
- 5
- 5.2
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6.2
- 6.35
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.4
- 7.5
- 7.6
- 7.8
- 7.92
- 8
- 8.2
- 8.4
- 8.5
- 8.8
- 9.4
- 9.53
- 10
- 10.2
- 10.4
- 10.8
- 11
- 11.4
- 12
- 12.4
- 12.7
- 13
- 13.4
- 14
- 14.4
- 15
- 15.4
- 15.88
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 25
- 26
- 30
- 31
- 32
- 35
- 36
- 40
- 45
- 46
- 50
- 55
- 60
- 65
- 66
- 70
- 75
- 80
- 90
- 100
-
work material
-
Single blade, two blades
-
Peripheral Blade Y/N
-
Tool Material Type
-
Coating Y/N
-
Coating Type
-
R Size (R)(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.5
- 0.55
- 0.6
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1, 1.5
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
- 2
- 2, 3
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3.25
- 3.5
- 3.75
- 4
- 4.25
- 4.5
- 4.75
- 5
- 5.25
- 5.5
- 5.75
- 6
- 6.25
- 6.5
- 6.75
- 7
- 7.25
- 7.5
- 7.75
- 8
- 8.5
- 9
- 9.5
- 10
- 10.5
- 11
- 11.5
- 12
- 12.5
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
Brand
-
- OSG (13)
- OKAZAKI SEIKO (4)
- KYOWA SEIKO (3)
- SANDVIK (3)
- THE CUT (3)
- ASAHI TOOLS (2)
- SANKO MFG (2)
- 7 LEADERS (1)
- DIXI (1)
- NOGAJAPAN (1)
- NS TOOL (1)
- SPEED TIGER (1)
- UNION TOOL (1)
- BIG KAISER (0)
- MAPAL (0)
- STAR-M (0)
- FUJIGEN (0)
- DAIICHITOOL (0)
- DIJET (0)
- FUKUDA (0)
- NT TOOL (0)
- EIKOSHA (0)
- GUHRING (0)
- IWATA TOOL (0)
- MAKOTOLOY (0)
- TAIYO-TOOL (0)
CAD data type
-
- 2D
- 3D
Categories related to Chamfer, V-Grooves
Metody płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.