Chamfering / Centering Tools（Coating Type：TiAlN Page 2）

Shipping Days	All Same day 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less

?* Information on days to ship and prices

• 

  Pointing Drill, 120° Tip, 3.175 mm Shank for Steel (TiAlN Coating)

  ATOM

  Drill dedicated for guide holes for micro-diameter machining. Ideal for machining where it is difficult to ensure the hole position and hole diameter precision. Improved wear resistance and long product life with TiAlN coating. Added small diameter sizes from φ0.03 to φ0.3 in 0.01 mm increments

  Select to compare

  Configure now
  Starting from∗ ：	66.85 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  3 mm Shank for Pointing Drill Tip 120° Steel (TiAlN Coated)

  ATOM

  Drill dedicated for guide holes for micro-diameter machining. Ideal for machining where it is difficult to ensure the hole position and hole diameter precision. Improved wear resistance and long product life with TiAlN coating. Added small diameter sizes from φ0.03 to φ0.3 in 0.01 mm increments

  Select to compare

  Configure now
  Starting from∗ ：	60.80 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  3 mm Shank for Pointing Drill Tip 90° Steel (TiAlN Coated)

  ATOM

  Drill dedicated for guide holes for micro-diameter machining. Ideal for machining where it is difficult to ensure the hole position and hole diameter precision. Improved wear resistance and long product life with TiAlN coating. Added small diameter sizes from φ0.03 to φ0.3 in 0.01 mm increments

  Select to compare

  Configure now
  Starting from∗ ：	60.80 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  SVMA Chamfering Mill, OK Coated

  OKAZAKI SEIKO

  In addition to hole chamfering, it can be used for transverse feed cutting such as V-groove machining and C-surface machining.

  Select to compare

  Configure now
  Starting from∗ ：	104.53 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Milling Cutter for 120° Chamfering Type N 6714

  GUHRING

  Taper half-angle 60° chamfering milling cutter.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	54.67 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Milling Cutter for 60° Chamfering Type N 6711

  GUHRING

  Taper half-angle 30° chamfering milling cutter.

  Select to compare

  Configure now
  Starting from∗ ：	50.44 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Straight Shank, Countersink 3-Flute 90° 1326

  GUHRING

  [Features]
  · Has 3 cutting edges for excellent cutting balance, enabling highly circular, stable chamfering and deburring with little chatter.
  · Using A coating achieves a longer life.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	53.80 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Deburring EW100VR 495

  GUHRING

  Capable of chamfering and deburring of hole entrances and exits by milling.

  Select to compare

  Configure now
  Starting from∗ ：	107.57 €
  Min. Shipping Days ：	24 Days

  *Unit price with basic configuration

• 

  Carbide Point Drill Joint Tool PE-90° C-PE-Q-V

  YAMAWA MFG

  Point Angle 125°, Chamfer Angle 90°The two angles allow simultaneous centering and chamfering. Two-stepped flat surface design allows good bite and achieves high machining precision.

  Select to compare

  Configure now
  Starting from∗ ：	131.75 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Carbide Center Drill TiAℓ N KCDA-60

  KYOWA SEIKO

  Both tip diameter and large diameter have torsional angle of 30°. Suppresses burrs and enables high-efficiency machining.

  Select to compare

  Configure now
  Starting from∗ ：	91.83 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Carbide Center Drill TiAℓ N KCDA-90

  KYOWA SEIKO

  Both tip diameter and large diameter have torsional angle of 30°. Suppresses burrs and enables high-efficiency machining.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	91.83 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Back Seat Mini Chamfer (Long Reach 90° Blade)

  NOGAJAPAN

  [Features]
  · A solid carbide chamfering cutter which can chamfer small diameter hole backs (minimum blade diameter: 3.0 mm).
  · Ideal for machining.
  · Spiral blade provides smooth sharpness.
  · A mini chamfer that can chamfer/deburr by milling either the back or front of the drill hole.
  · Mini chamfering 90° blade long shank type, overall length: 105 mm
  [Applications]
  · Work materials: Carbon steel, stainless steel, cast steel, aluminum, plastic, nickel alloy, titanium alloy, etc.
  · A mini chamfer that can chamfer and deburr by milling either the back or front of the drill hole.

  Select to compare

  Configure now
  Starting from∗ ：	113.15 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Chamfering Cutter NC Spot Drill (Chip)

  NINE9

  Select to compare

  Configure now
  Starting from∗ ：	81.34 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Counter Sink (Titan Coating) Set【6 Pieces Per Package】

  ILIX

  [Features]
  · Reduces secondary burrs and exhibits durability that enables efficient work.
  · Frequently used sizes are selected and stored in a metal case.
  [Applications]
  · Work materials: Steel, alloy steel, stainless steel, copper alloy, aluminum alloy.
  · For countersinking.
  · Chamfering.
  · Deburring.
  [Material]
  · High-speed steel (HSS)

  Select to compare

  Configure now
  Starting from∗ ：	319.79 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Counter Sink (Titanium Nitride Alumina Coating) Set【4 Pieces Per Package】

  ILIX

  [Features]
  · Compared to TiN coatings, cutting speed and wear resistance are markedly improved, enabling high efficiency machining.
  [Applications]
  · Work materials: Steel, alloy steel, stainless steel, copper alloy, difficult-to-cut materials.
  · For plating, chamfering, deburring.
  [Material]
  · High-speed steel (HSS)

  Select to compare

  Configure now
  Starting from∗ ：	546.33 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series

  OSG

  High-speed cutting is possible compared to conventional products, and a wide range of processing such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High-speed steel series and carbide series are available.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	119.56 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  FX-Coated 2-Flute, V Cut FX-MG-VCM

  OSG

  [Features]
  · Carbide chamfering series.

  Select to compare

  Configure now
  Starting from∗ ：	102.67 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  WATERMILLS ® 3-Flute Countersink WMC5TA 90° 5% Cobalt High-Speed Steel + TiAlN Coating

  WATERMILLS

  [Features]
  It has 3 flutes.
  Applications: Hole chamfering
  Tip angle (θ): 90°
  Coating type: TiAIN

  Select to compare

  Configure now
  Starting from∗ ：	43.43 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  MUGEN Coating C Chamfer Cutter NSCV-M

  NS TOOL

  [Features]
  · Enables easy C chamfering.
  · Uses MUGEN coating that dramatically improves the durability.
  

  Select to compare

  Configure now
  Starting from∗ ：	111.08 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 60°

  MAKOTOLOY

  [Features]
  · A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
  · The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
  · Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
  · An ultra-fine particle carbide alloy is used for the carbide material.
  · Long tool life, improved cutting speed and reduced machining time.
  · Standard type.

  Select to compare

  Configure now
  Starting from∗ ：	125.71 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 90°

  MAKOTOLOY

  [Features]
  · A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
  · The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
  · Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
  · An ultra-fine particle carbide alloy is used for the carbide material.
  · Long tool life, improved cutting speed and reduced machining time.
  · Standard type.

  Select to compare

  Configure now
  Starting from∗ ：	125.71 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  V-Cut Carbide End Mills, Standard Type, Coated Series AMVS 120°

  MAKOTOLOY

  [Features]
  · A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
  · The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
  · Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
  · An ultra-fine particle carbide alloy is used for the carbide material.
  · Long tool life, improved cutting speed and reduced machining time.
  · Standard type.

  Select to compare

  Configure now
  Starting from∗ ：	125.71 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  V-Cut Carbide End Mills, Long Type, Coated Series AMVL 60°

  MAKOTOLOY

  [Features]
  · A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
  · The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
  · Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
  · An ultra-fine particle carbide alloy is used for the carbide material.
  · Long tool life, improved cutting speed and reduced machining time.
  · Long type.

  Select to compare

  Configure now
  Starting from∗ ：	134.27 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  V-Cut Carbide End Mills, Long Type, Coated Series AMVL 90°

  MAKOTOLOY

  [Features]
  · A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
  · The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
  · Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
  · An ultra-fine particle carbide alloy is used for the carbide material.
  · Long tool life, improved cutting speed and reduced machining time.
  · Long type.

  Select to compare

  Configure now
  Starting from∗ ：	134.27 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Carbide V Cut End Mill Long Type Coated Series AMVL 120°

  MAKOTOLOY

  [Features]
  · A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
  · The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
  · Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
  · An ultra-fine particle carbide alloy is used for the carbide material.
  · Long tool life, improved cutting speed and reduced machining time.
  · Long type.

  Select to compare

  Configure now
  Starting from∗ ：	134.27 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  V-Cut Small Diameter Carbide End Mills Coated Series AMVS 60°

  MAKOTOLOY

  [Features]
  · A small but high quality end mill that can also be used with high precision machining technology.

  Select to compare

  Configure now
  Starting from∗ ：	118.22 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  V-Cut Small Diameter Carbide End Mills Coated Series AMVS 90°

  MAKOTOLOY

  [Features]
  · A small but high quality end mill that can also be used with high precision machining technology.

  Select to compare

  Configure now
  Starting from∗ ：	118.22 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  V-Cut Small Diameter Carbide End Mills Coated Series AMVS 120°

  MAKOTOLOY

  [Features]
  · A small but high quality end mill that can also be used with high precision machining technology.

  Select to compare

  Configure now
  Starting from∗ ：	118.22 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Mini Corner Rounding Cutter, Carbide C-CRC-V

  THE CUT

  [Features]
  · Ideal for CNC machining.
  · Capable of machining extremely thin workpieces.
  · Simple regrinding/repolishing.

  Select to compare

  Configure now
  Starting from∗ ：	128.59 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  V Men-Maru C-MPE-V

  THE CUT

  [Features]
  · Capable of chamfering, side surface machining, etc. For models with a tip angle of 90° or 120°, work such as V-grooving, hole drilling and centering can all be done without the use of additional tools.
  · Sharp cutting edge with a helix angle of 40°. Boasts good cutting chip discharge, delivering excellent cutting performance.
  · Ultra-fine particle carbide with a TiAlN coating for high rigidity, excellent wear resistance and a significantly longer tool life.

  Select to compare

  Configure now
  Starting from∗ ：	192.95 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

Loading...