Rejestracja

Tłumaczymy nasz sklep na język polski!

Wymaga to jednak czasu, ponieważ w ofercie mamy dużo artykułów, a na nasz sklep składa się wiele stron. Chwilowo nasz katalog produktów dostępny będzie w języku angielskim. Dziękujemy za cierpliwość!
Warunki filtrowania

Wyczyść wszystko

  • Stan magazynowy
  • Application
  • Tip angle (θ)
    [60–160/1]
  • Tool Diameter (D)(mm)
  • work material
  • Tool Material Type
  • R Size (R)(mm)
  • Chamfering / Centering Tools (Coating Y/N: N/A Strona 3)

    Chamfering/countersinking tools are tools used for grinding center holes, positioning holes, grinding holes, or deburring and rounding the edges after side-surface machining. They are attached to machine tools such as drill press, lathe, machining center, etc. Center drills are used to position the initial indentation on the work material to avoid misalignment of the drill bit tip. Their materials include alloy carbide, powdered high-speed steel, cobalt high-speed steel and high-speed steel. Countersinking and chamfering cutters are capable of chamfering after drilling holes. Chamfering cutters with a hole on the tip allow for smooth cutting discharge on soft work materials such as copper and aluminum. Center drills have a 90° tip angle and they can be used for positioning and chamfering at the same time.
    • R-Nouveau

        FUJIGEN

        R-Nouveau

        Various round chamfering is possible by exchanging the tip.
        Czytaj dalej
        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
        Round Chamfer-69.2General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/A-N/ANon-Coated
        Cena (bez VAT) od:
        445.48 €
        Standardowa data wysyłki:
        8 dni robocze
        Konfiguruj
      • RC Hand Cutter

          FUJIGEN

          RC Hand Cutter

          Round chamfering and C chamfering of R1, R2 and R3 are possible by replacing the insert.The unique insert replacement process makes insert replacement fast and accurate.
          Czytaj dalej
          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
          Round Chamfer-25General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/A-N/ANon-Coated
          Cena (bez VAT) od:
          164.97 €
          Standardowa data wysyłki:
          8 dni robocze
          Konfiguruj
        • Ryanmencut R

            FUJIGEN

            Ryanmencut R

            [Features]· Front and back round and corner chamfering possible. Back and front C chamfering is also possible by exchanging the tip.· Mini R is for front only.· Uses a tip that allows 8 corners to be used.
            Czytaj dalej
            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
            Round Chamfer-30 ~ 48General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/A-N/ANon-Coated
            Cena (bez VAT) od:
            352.62 €
            Standardowa data wysyłki:
            9 dni robocze
            Konfiguruj
          • Mini R

              FUJIGEN

              Mini R

              8 corners of an insert can be used.Round chamfers and C chamfers are possible by replacing the insert.
              Czytaj dalej
              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
              Round Chamfer-16General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]Single bladeN/A-N/ANon-Coated
              Cena (bez VAT) od:
              148.90 €
              Standardowa data wysyłki:
              8 dni robocze
              Konfiguruj
            • Tip for Momimen / All C32GUX

                FUJIGEN

                Tip for Momimen / All C32GUX

                Tip materials are cermet / K10 class carbide / M20 class carbide / micro grain carbide / HSS.
                Czytaj dalej
                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                Centering (Positioning) / Chamfering/Horizontal--General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]---N/ANon-Coated
                Cena (bez VAT) od:
                28.24 €
                Standardowa data wysyłki:
                6 dni robocze
                Konfiguruj
              • Tip for 60° Momimen D43GUX

                  FUJIGEN

                  Tip for 60° Momimen D43GUX

                  An indexable insert for 60° momimen that can be used for centering and chamfering.[Features]Used for centering holes, chamfering countersinks and chamfering edges.
                  Czytaj dalej
                  ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                  Centering (Positioning) / Chamfering/Horizontal--Aluminum[○] / Resin[○]---N/ANon-Coated
                  Cena (bez VAT) od:
                  43.74 €
                  Standardowa data wysyłki:
                  9 dni robocze
                  Konfiguruj
                • Tip for Chamfering Cutter / RC End Cutter / Baitender T32MOR

                    FUJIGEN

                    Tip for Chamfering Cutter / RC End Cutter / Baitender T32MOR

                    Inserts for chamfer cutters / R Cindo cutters / Baitenders.
                    Czytaj dalej
                    ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                    Chamfering/Horizontal / Round Chamfer--General Steel[○] / Stainless Steel[○] / Cast Iron[○]---N/ANon-Coated
                    Cena (bez VAT) od:
                    11.38 €
                    Standardowa data wysyłki:
                    9 dni robocze
                    Konfiguruj
                  • Tip for Chamfering Cutter / RC End Cutter / Baitender TT32GUR

                      FUJIGEN

                      Tip for Chamfering Cutter / RC End Cutter / Baitender TT32GUR

                      Tip materials are cermet / K10 class carbide / M20 class carbide / micro grain carbide / HSS.
                      Czytaj dalej
                      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                      Chamfering/Horizontal / Round Chamfer--General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]---N/ANon-Coated
                      Cena (bez VAT) od:
                      23.09 €
                      Standardowa data wysyłki:
                      6 dni robocze
                      Konfiguruj
                    • Tip for Young Men TNEX270412

                        FUJIGEN

                        Tip for Young Men TNEX270412

                        A special insert for a Young Men chamfering cutter that can be used for chamfering.[Features]Used for chamfering.
                        Czytaj dalej
                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                        Chamfering/Horizontal--Aluminum[○] / Resin[○]---N/ANon-Coated
                        Cena (bez VAT) od:
                        48.18 €
                        Standardowa data wysyłki:
                        8 dni robocze
                        Konfiguruj
                      • For Gentlemen, Insert X63GUR

                          FUJIGEN

                          For Gentlemen, Insert X63GUR

                          A special gentleman's carbide insert suitable for chamfering.[Features]Used for chamfering.
                          Czytaj dalej
                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                          Chamfering/Horizontal--General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]---N/ANon-Coated
                          Cena (bez VAT) od:
                          63.21 €
                          Standardowa data wysyłki:
                          9 dni robocze
                          Konfiguruj
                        • Tip for Mentoru-B TM32GUR-HSS

                            FUJIGEN

                            Tip for Mentoru-B TM32GUR-HSS

                            A special gentleman's carbide insert that can be used for chamfering.[Features]Used for chamfering.
                            Czytaj dalej
                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                            Chamfering/Horizontal------N/ANon-Coated
                            Cena (bez VAT) od:
                            28.00 €
                            Standardowa data wysyłki:
                            6 dni robocze
                            Konfiguruj
                          • Tip for Mentoru-B TM32GSR-HSS
                            • Stock

                            FUJIGEN

                            Tip for Mentoru-B TM32GSR-HSS

                            A special insert for Mentrube that can be used for chamfering.[Features]Used for chamfering.
                            Czytaj dalej
                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                            Chamfering/Horizontal------N/ANon-Coated
                            Cena (bez VAT) od:
                            34.16 €
                            Standardowa data wysyłki:
                            9 dni robocze
                            Konfiguruj
                          • Multi-Angle Mill Tip

                              FUJIGEN

                              Multi-Angle Mill Tip

                              An insert for multi-angle cutters.[Features]Used for chamfering.
                              Czytaj dalej
                              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                              Chamfering/Horizontal--General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]---N/ANon-Coated
                              Cena (bez VAT) od:
                              31.34 €
                              Standardowa data wysyłki:
                              9 dni robocze
                              Konfiguruj
                            • Tip for R-Nouveau / R-Nouveau Jr.

                                FUJIGEN

                                Tip for R-Nouveau / R-Nouveau Jr.

                                One insert for R-Nouveau / R-Nouveau Jr. /10R tool bit.The number of corners used is 1.
                                Czytaj dalej
                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                Round Chamfer--General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]---N/ANon-Coated
                                Cena (bez VAT) od:
                                54.51 €
                                Standardowa data wysyłki:
                                8 dni robocze
                                Konfiguruj
                              • Both Sides Cut (RR16-30S / RR25-40S)/ for Mini R Tip

                                  FUJIGEN

                                  Both Sides Cut (RR16-30S / RR25-40S)/ for Mini R Tip

                                  One insert for Ryanmencut-R and Mini-R.Compatible models: Ryanmencut-R / Mini-R / Nice-Corner FR[Features]For round chamfering.
                                  Czytaj dalej
                                  ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                  Round Chamfer--General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]---N/ANon-Coated
                                  Cena (bez VAT) od:
                                  35.61 €
                                  Standardowa data wysyłki:
                                  8 dni robocze
                                  Konfiguruj
                                • Eagle Cut for (M4-M6) Tip

                                    FUJIGEN

                                    Eagle Cut for (M4-M6) Tip

                                    An insert that can perform counterboring.[Features]It is used for counterboring.
                                    Czytaj dalej
                                    ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                    Hole Chamfer--General Steel[○] / Stainless Steel[○] / Cast Iron[○]---N/ANon-Coated
                                    Cena (bez VAT) od:
                                    11.95 €
                                    Standardowa data wysyłki:
                                    9 dni robocze
                                    Konfiguruj
                                  • Eagle Cut for (M8-M30) / for Birdy Cut Tip

                                      FUJIGEN

                                      Eagle Cut for (M8-M30) / for Birdy Cut Tip

                                      An insert that can perform counterboring.Compatible models: Eaglecut (M8 to M30) / Birdiecut
                                      Czytaj dalej
                                      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                      Hole Chamfer--General Steel[○] / Stainless Steel[○] / Cast Iron[○]---N/ANon-Coated
                                      Cena (bez VAT) od:
                                      12.39 €
                                      Standardowa data wysyłki:
                                      9 dni robocze
                                      Konfiguruj
                                    • Tip for R Giga

                                        FUJIGEN

                                        Tip for R Giga

                                        It is an insert with which round chamfering can be performed.[Features]For round chamfering.
                                        Czytaj dalej
                                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                        Round Chamfer--General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]---N/ANon-Coated
                                        Cena (bez VAT) od:
                                        260.51 €
                                        Standardowa data wysyłki:
                                        8 dni robocze
                                        Konfiguruj
                                      • S32MOZ Chip S32MOZ

                                          FUJIGEN

                                          S32MOZ Chip S32MOZ

                                          Tip materials are cermet / K10 class carbide / M20 class carbide / micro grain carbide.
                                          Czytaj dalej
                                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                          Chamfering/Horizontal / Round Chamfer--General Steel[○] / Stainless Steel[○] / Cast Iron[○]---N/ANon-Coated
                                          Cena (bez VAT) od:
                                          9.99 €
                                          Standardowa data wysyłki:
                                          6 dni robocze
                                          Konfiguruj
                                        • S32MOZ Chip S32GUR

                                            FUJIGEN

                                            S32MOZ Chip S32GUR

                                            S-type precision insert for face machining.[Features]Used for face milling and chamfering.
                                            Czytaj dalej
                                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                            Chamfering/Horizontal / Round Chamfer--General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]---N/ANon-Coated
                                            Cena (bez VAT) od:
                                            17.76 €
                                            Standardowa data wysyłki:
                                            6 dni robocze
                                            Konfiguruj
                                          • S32MOZ Chip S32GUR-DIA
                                            • Volume Discount

                                            FUJIGEN

                                            S32MOZ Chip S32GUR-DIA

                                            One insert for S-type / Aeromill (negative type).Compatible models: Ryanmencut-R / Mini-R / Nice-Corner V3,-F3,-FR / NEW Nice Cut / Aeromill / NEW Tiko Cutter / Han-Chan-man / Han-Chan-man R[Features]For face milling and chamfering.
                                            Czytaj dalej
                                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                            Chamfering/Horizontal / Round Chamfer--Aluminum[○] / Resin[○]---N/ANon-Coated
                                            Cena (bez VAT) od:
                                            139.52 €
                                            Standardowa data wysyłki:
                                            9 dni robocze
                                            Konfiguruj
                                          • Aero Mill (Positive Type) / Kame Cutter / Tip for Nice Corner F3
                                            • Volume Discount

                                            FUJIGEN

                                            Aero Mill (Positive Type) / Kame Cutter / Tip for Nice Corner F3

                                            Tip materials are cermet / K10 class carbide / M20 class carbide / micro grain carbide.
                                            Czytaj dalej
                                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                            Chamfering/Horizontal--Aluminum[○] / Resin[○]---N/ANon-Coated
                                            Cena (bez VAT) od:
                                            15.34 €
                                            Standardowa data wysyłki:
                                            8 dni robocze
                                            Konfiguruj
                                          • N-Type N43GUR Tip

                                              FUJIGEN

                                              N-Type N43GUR Tip

                                              This is an N-type insert that can be used for face milling.[Features]Used for face milling and chamfering.
                                              Czytaj dalej
                                              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                              Round Chamfer--General Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]---N/ANon-Coated
                                              Cena (bez VAT) od:
                                              26.98 €
                                              Standardowa data wysyłki:
                                              9 dni robocze
                                              Konfiguruj
                                            • N-Type N43MOZ Tip

                                                FUJIGEN

                                                N-Type N43MOZ Tip

                                                An insert that can perform chamfering.Compatible models: Nice-Corner VR[features]Used for face milling and chamfering.
                                                Czytaj dalej
                                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                Round Chamfer------N/ANon-Coated
                                                Cena (bez VAT) od:
                                                16.64 €
                                                Standardowa data wysyłki:
                                                9 dni robocze
                                                Konfiguruj
                                              • T-Type T33MOZ Tip

                                                  FUJIGEN

                                                  T-Type T33MOZ Tip

                                                  A T-type carbide insert that can perform shoulder machining.Compatible models: New Nice Cut / Skat Cut[Features]It is used for shoulder machining.
                                                  Czytaj dalej
                                                  ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                  ---General Steel[○] / Stainless Steel[○] / Cast Iron[○]---N/ANon-Coated
                                                  Cena (bez VAT) od:
                                                  14.91 €
                                                  Standardowa data wysyłki:
                                                  9 dni robocze
                                                  Konfiguruj
                                                • T-Type T33MOR Tip

                                                    FUJIGEN

                                                    T-Type T33MOR Tip

                                                    [Features] Materials: Cermet, carbide grade K10, carbide grade M20Number of corners used: 6
                                                    Czytaj dalej
                                                    ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                    ---General Steel[○] / Stainless Steel[○] / Cast Iron[○]---N/ANon-Coated
                                                    Cena (bez VAT) od:
                                                    14.91 €
                                                    Standardowa data wysyłki:
                                                    9 dni robocze
                                                    Konfiguruj
                                                  • T-Type T33GUR Tip

                                                      FUJIGEN

                                                      T-Type T33GUR Tip

                                                      [Features] Materials: Cermet, carbide grade K10, carbide grade M20Cutting edge shape: Ground edge, sharp edge.
                                                      Czytaj dalej
                                                      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                      ---General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]---N/ANon-Coated
                                                      Cena (bez VAT) od:
                                                      21.97 €
                                                      Standardowa data wysyłki:
                                                      6 dni robocze
                                                      Konfiguruj
                                                    • Shuririn C32GUR Tip

                                                        FUJIGEN

                                                        Shuririn C32GUR Tip

                                                        [Features] -For Shurillin (C32GUR)Materials: Cemented carbide grade K10, Cemented carbide grade M20Cutting edge form: Ground edge, sharp edge
                                                        Czytaj dalej
                                                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                        ---General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]---N/ANon-Coated
                                                        Cena (bez VAT) od:
                                                        21.10 €
                                                        Standardowa data wysyłki:
                                                        9 dni robocze
                                                        Konfiguruj
                                                      • Tip for Nicecorner V2

                                                          FUJIGEN

                                                          Tip for Nicecorner V2

                                                          [Features] -For Nice-Corner V2Materials: Cermet, carbide grade M20.
                                                          Czytaj dalej
                                                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                          ---General Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]---N/ANon-Coated
                                                          Cena (bez VAT) od:
                                                          29.79 €
                                                          Standardowa data wysyłki:
                                                          8 dni robocze
                                                          Konfiguruj
                                                        • Tip for Use with Corner Tool

                                                            FUJIGEN

                                                            Tip for Use with Corner Tool

                                                            [Features] -For SumiccoThe material of the insert is K10 grade carbide / M20 grade carbide.
                                                            Czytaj dalej
                                                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                            ---General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]---N/ANon-Coated
                                                            Cena (bez VAT) od:
                                                            26.33 €
                                                            Standardowa data wysyłki:
                                                            9 dni robocze
                                                            Konfiguruj
                                                          • Dekasumi Chip

                                                              FUJIGEN

                                                              Dekasumi Chip

                                                              [Features] A carbide grade K10 / carbide grade M20 insert for Dekasumi.
                                                              Czytaj dalej
                                                              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                              ---General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]---N/ANon-Coated
                                                              Cena (bez VAT) od:
                                                              45.04 €
                                                              Standardowa data wysyłki:
                                                              9 dni robocze
                                                              Konfiguruj
                                                            • Maru Chan Tip

                                                                FUJIGEN

                                                                Maru Chan Tip

                                                                [Features] -For Maru-chanMaterials: Carbide grade K10, CermetCutting edge shape: Sharp edge, ground edgeNumber of corners used: 360° double-sided.
                                                                Czytaj dalej
                                                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                -------N/ANon-Coated
                                                                Cena (bez VAT) od:
                                                                8.85 €
                                                                Standardowa data wysyłki:
                                                                8 dni robocze
                                                                Konfiguruj
                                                              • Corner Radius Cutter 2-Flute
                                                                • ZNIŻKA
                                                                • Volume Discount

                                                                ATOM

                                                                Corner Radius Cutter 2-Flute

                                                                A high-precision inner rounding cutter for precision machining.
                                                                Czytaj dalej
                                                                ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                Round Chamfer-1 ~ 2.5General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎]Single bladeN/ACarbideN/ANon-Coated
                                                                Cena (bez VAT) od:
                                                                72.88 €
                                                                Cena specjalna
                                                                Standardowa data wysyłki:
                                                                Towar dostępny w magazynie: 1 dzień roboczy
                                                                Niektóre pozycje mogą zostać wysłane tego samego dnia
                                                                Konfiguruj
                                                              • 3.175 mm Shank for Pointing Drill Tip 120° Steel

                                                                  ATOM

                                                                  3.175 mm Shank for Pointing Drill Tip 120° Steel

                                                                  Drill dedicated for guide holes for micro-diameter machining. Ideal for machining where it is difficult to ensure the hole position and hole diameter precision. Added small diameter sizes from φ0.03 to φ0.3 in 0.01 mm increments
                                                                  Czytaj dalej
                                                                  ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                  Centering (Positioning) / Drilling1200.03 ~ 3General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○]Single bladeAvailableCarbideN/ANon-Coated
                                                                  Cena (bez VAT) od:
                                                                  53.64 €
                                                                  Standardowa data wysyłki:
                                                                  6 dni robocze
                                                                  Konfiguruj
                                                                • 3 mm Shank for Pointing Drill Tip 120° Steel

                                                                    ATOM

                                                                    3 mm Shank for Pointing Drill Tip 120° Steel

                                                                    Drill dedicated for guide holes for micro-diameter machining. Ideal for machining where it is difficult to ensure the hole position and hole diameter precision. Added small diameter sizes from φ0.03 to φ0.3 in 0.01 mm increments
                                                                    Czytaj dalej
                                                                    ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                    Centering (Positioning) / Drilling1200.03 ~ 2.5General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○]Single bladeAvailableCarbideN/ANon-Coated
                                                                    Cena (bez VAT) od:
                                                                    53.64 €
                                                                    Standardowa data wysyłki:
                                                                    6 dni robocze
                                                                    Konfiguruj
                                                                  • 3 mm Shank for Pointing Drill Tip 120° Non-Ferrous / Resin

                                                                      ATOM

                                                                      3 mm Shank for Pointing Drill Tip 120° Non-Ferrous / Resin

                                                                      Drill dedicated for guide holes for micro-diameter machining. Ideal for machining where it is difficult to ensure the hole position and hole diameter precision. Added small diameter sizes from φ0.03 to φ0.3 in 0.01 mm increments
                                                                      Czytaj dalej
                                                                      ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                      Centering (Positioning) / Drilling1200.03 ~ 3Aluminum[◎] / Resin[◎]Single bladeAvailableCarbideN/ANon-Coated
                                                                      Cena (bez VAT) od:
                                                                      48.90 €
                                                                      Standardowa data wysyłki:
                                                                      6 dni robocze
                                                                      Konfiguruj
                                                                    • RC Hand Cutter Tip

                                                                        FUJIGEN

                                                                        RC Hand Cutter Tip

                                                                        [Features] Bevelling for R Cindo cutter (T32GSR) Material: Carbide grade M20Material: General steel / Stainless steel / Cast iron / Aluminium / Resin.
                                                                        Czytaj dalej
                                                                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                        Round Chamfer--General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]---N/ANon-Coated
                                                                        Cena (bez VAT) od:
                                                                        45.81 €
                                                                        Standardowa data wysyłki:
                                                                        9 dni robocze
                                                                        Konfiguruj
                                                                      • Counter Sink
                                                                        • ZNIŻKA
                                                                        • Volume Discount

                                                                        TRUSCO NAKAYAMA

                                                                        Counter Sink

                                                                        [Characteristics] Uses cobalt high speed steel as its base metal for excellent abrasion and heat resistance. Uses a 3-flute blade edge shape for good cutting chip discharge, giving a clean finish. [Application] Work Material: Iron, Cast Material, Stainless Steel. Chamfering. Deburring. Countersinking.
                                                                        Czytaj dalej
                                                                        ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                        Hole Chamfer90-General Steel[○] / Stainless Steel[○] / Cast Iron[○]Single bladeN/ACobalt HSSN/A-
                                                                        Cena (bez VAT) od:
                                                                        19.85 €
                                                                        Cena specjalna
                                                                        Standardowa data wysyłki:
                                                                        Towar dostępny w magazynie: 1 dzień roboczy
                                                                        Możliwa wysyłka tego samego dnia
                                                                        Konfiguruj
                                                                      • Chamfering Cutter

                                                                          SKC

                                                                          Chamfering Cutter

                                                                          Electric drill / impact screwdriver / drilling machine can also be used.
                                                                          Czytaj dalej
                                                                          ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                          Hole Chamfer9012 ~ 16-Single bladeAvailableHigh-speed steelN/ANon-Coated
                                                                          Cena (bez VAT) od:
                                                                          33.24 €
                                                                          Standardowa data wysyłki:
                                                                          6 dni robocze
                                                                          Konfiguruj
                                                                        • Center Drill, Okabe Standard, Type 1, Carbide 60°

                                                                            NAKAJIMAKOUKI

                                                                            Center Drill, Okabe Standard, Type 1, Carbide 60°

                                                                            As it is made of carbide, it has both high hardness and high elasticity. It is a centre drill made with one of the best heat treatments and can be used for machining general steel, heat-treated steel, stainless steel, cast iron, etc.
                                                                            Czytaj dalej
                                                                            ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                            Centering (Positioning)600.3 ~ 6General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]Single blade / Double-edgedN/ACarbideN/ANon-Coated
                                                                            Cena (bez VAT) od:
                                                                            117.72 €
                                                                            Standardowa data wysyłki:
                                                                            7 dni robocze
                                                                            Konfiguruj
                                                                          • Center Drill, Okabe Standard, Type 1, Carbide 90°

                                                                              NAKAJIMAKOUKI

                                                                              Center Drill, Okabe Standard, Type 1, Carbide 90°

                                                                              Since it is made of carbide, it has high hardness and elasticity. It is a centre drill made with one of the best heat treatments and can be used for machining general steel, heat treated steel, stainless steel, cast iron, etc.
                                                                              Czytaj dalej
                                                                              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                              Centering (Positioning)900.3 ~ 6General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎]Double-edgedN/ACarbideN/ANon-Coated
                                                                              Cena (bez VAT) od:
                                                                              99.53 €
                                                                              Standardowa data wysyłki:
                                                                              7 dni robocze
                                                                              Konfiguruj
                                                                            • Center Drill, Okabe Standard, JIS Type 1 60°
                                                                              • Volume Discount

                                                                              NAKAJIMAKOUKI

                                                                              Center Drill, Okabe Standard, JIS Type 1 60°

                                                                              As it is made of high speed steel, it has a high hardness. It is a centre drill made with one of the best heat treatments, making it suitable for machining general steel.
                                                                              Czytaj dalej
                                                                              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                              Centering (Positioning)600.7 ~ 6General Steel[○]Double-edgedN/AHigh-speed steelN/ANon-Coated
                                                                              Cena (bez VAT) od:
                                                                              15.08 €
                                                                              Standardowa data wysyłki:
                                                                              6 dni robocze
                                                                              Konfiguruj
                                                                            • Center Drill, Okabe Standard, Long Center Drill 60°
                                                                              • Volume Discount

                                                                              NAKAJIMAKOUKI

                                                                              Center Drill, Okabe Standard, Long Center Drill 60°

                                                                              As it is made of high speed steel, it has a high hardness. It is a centre drill made with one of the best heat treatments, making it suitable for machining general steel.
                                                                              Czytaj dalej
                                                                              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                              Centering (Positioning)601 ~ 5General Steel[○]Double-edgedN/AHigh-speed steelN/ANon-Coated
                                                                              Cena (bez VAT) od:
                                                                              56.60 €
                                                                              Standardowa data wysyłki:
                                                                              6 dni robocze
                                                                              Konfiguruj
                                                                            • Center Drill, Okabe Standard, Long Center Drill 90°
                                                                              • ZNIŻKA
                                                                              • Volume Discount

                                                                              NAKAJIMAKOUKI

                                                                              Center Drill, Okabe Standard, Long Center Drill 90°

                                                                              As it is made of high speed steel, it has a high hardness. It is a centre drill made with one of the best heat treatments, making it suitable for machining general steel.
                                                                              Czytaj dalej
                                                                              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                              Centering (Positioning)901 ~ 5General Steel[○]Double-edgedN/AHigh-speed steelN/ANon-Coated
                                                                              Cena (bez VAT) od:
                                                                              58.74 €
                                                                              Cena specjalna
                                                                              Standardowa data wysyłki:
                                                                              Towar dostępny w magazynie: 1 dzień roboczy
                                                                              Niektóre pozycje mogą zostać wysłane tego samego dnia
                                                                              Konfiguruj
                                                                            • SVM Chamfering Mill, Non-Coated
                                                                              • Volume Discount

                                                                              OKAZAKI SEIKO

                                                                              SVM Chamfering Mill, Non-Coated

                                                                              In addition to hole chamfering, it can be used for transverse feed cutting such as V-groove machining and C-surface machining.
                                                                              Czytaj dalej
                                                                              ApplicationTip angle (θ)Tool Diameter (D)(mm)work materialSingle blade, two bladesPeripheral Blade Y/NTool Material TypeCoating Y/NCoating Type
                                                                              Hole Chamfer / Chamfering/Horizontal / V Groove90 ~ 1203 ~ 20General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]Single bladeAvailableCarbideN/ANon-Coated
                                                                              Cena (bez VAT) od:
                                                                              80.16 €
                                                                              Standardowa data wysyłki:
                                                                              8 dni robocze
                                                                              Konfiguruj