Tłumaczymy nasz sklep na język polski!

Wymaga to jednak czasu, ponieważ w ofercie mamy dużo artykułów, a na nasz sklep składa się wiele stron. Chwilowo nasz katalog produktów dostępny będzie w języku angielskim. Dziękujemy za cierpliwość!

Warunki filtrowania

Wyczyść wszystko

Stan magazynowy
Pokaż tylko pozycje magazynowe

Application

Centering (Positioning)
Hole Chamfer
Chamfering/Horizontal
V Groove
Round Chamfer
Drilling
Other

Tip angle (θ)

30
45
60
60°
80
90
90°
118
120
135

[60–160/1]

Tool Diameter (D)(mm)

work material

General Steel
Quenched and tempered steel
High Hardness Steel
Stainless Steel
Cast Iron
Aluminum
Titanium
Copper
Resin

Single blade, two blades

Single blade
Double-edged

Peripheral Blade Y/N

Available
N/A

Tool Material Type

Cobalt HSS

Coating Y/N

Available
N/A

Coating Type

TiAlN
TiCN
TiN
Non-Coated

R Size (R)(mm)

0.5
0.75
1
1.25
1.5
1.75
2
2.25
2.5
2.75
3
3.5
4
4.5
5
5.75
6
7
8
10
10.5
11
14
15.5
20.5

Producent

Chamfering / Centering Tools (Tool Material Type: Cobalt HSS)

Chamfering/countersinking tools are tools used for grinding center holes, positioning holes, grinding holes, or deburring and rounding the edges after side-surface machining. They are attached to machine tools such as drill press, lathe, machining center, etc. Center drills are used to position the initial indentation on the work material to avoid misalignment of the drill bit tip. Their materials include alloy carbide, powdered high-speed steel, cobalt high-speed steel and high-speed steel. Countersinking and chamfering cutters are capable of chamfering after drilling holes. Chamfering cutters with a hole on the tip allow for smooth cutting discharge on soft work materials such as copper and aluminum. Center drills have a 90° tip angle and they can be used for positioning and chamfering at the same time.

Liczba pozycji: 32

* Informacje o dniach wysyłki, kosztach wysyłki i cenach.

Porównaj specyfikacje

Liczba pozycji do wyświetlenia:Sortuj według:

Data wysyłki:

CRC Corner Rounding Cutter

Volume Discount

SANKO MFG

CRC Corner Rounding Cutter

One cutter for chamfering curved surfacesMaterial, carbon steel, steel alloy, tool steel/cast ironTool grade, cobalt high speed steel.

Czytaj dalej

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Round Chamfer	-	9 ～ 32	General Steel[○] / Cast Iron[○]	-	N/A	Cobalt HSS	N/A	Non-Coated

Cena (bez VAT) od:

75.43 €

Standardowa data wysyłki:

6 dni robocze

NEW Chamfering Drill

Volume Discount

NT TOOL

NEW Chamfering Drill

For machining non-viscous materials[Features]· A wide range of chamfering sizes with one unit.· Beautiful cut surfaces with zero chatter.· Easy positioning.· Uses Cobalt HSS

Czytaj dalej

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Hole Chamfer	90	-	General Steel[○] / High Hardness Steel[○] / Cast Iron[○]	Single blade / Double-edged	N/A	Cobalt HSS	N/A	-

Cena (bez VAT) od:

51.18 €

Standardowa data wysyłki:

6 dni robocze

Center Chamfer Cutter CC

Volume Discount

EIKOSHA

Center Chamfer Cutter CC

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	30 ～ 120	4 ～ 35	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	-	Cobalt HSS	N/A	-

Cena (bez VAT) od:

90.26 €

Standardowa data wysyłki:

6 dni robocze

High-Speed Steel Chamfering End Mill, 2-Flute / Short

Non-Coated
2 Flutes
S (Short)

MISUMI

High-Speed Steel Chamfering End Mill, 2-Flute / Short

Chamfering end mill with the angle that can be freely selected in 1° increments

Czytaj dalej

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	60 ～ 160	10 ～ 25	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Cobalt HSS	Available / N/A	TiCN

Standardowa data wysyłki:

7 dni robocze

TiAlN Coated High-Speed Steel NC Spot Drill, Multi-Functional Model

Volume Discount

MISUMI

TiAlN Coated High-Speed Steel NC Spot Drill, Multi-Functional Model

A single tool with high efficiency that's capable of all centering, chamfering and V grooving

Czytaj dalej

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Hole Chamfer	90	3 ～ 12	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	N/A	Cobalt HSS	Available	TiAlN

Cena (bez VAT) od:

22.28 €

Standardowa data wysyłki:

5 dni robocze

TiAlN Coated High-Speed Steel NC Spot Drill, Regular, Long Shack

Volume Discount

MISUMI

TiAlN Coated High-Speed Steel NC Spot Drill, Regular, Long Shack

TiAlN coated type of the popular spot drill

Czytaj dalej

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Hole Chamfer	90	2 ～ 12	General Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	N/A	Cobalt HSS	Available	TiAlN

Cena (bez VAT) od:

12.33 €

Standardowa data wysyłki:

5 dni robocze

TiN Coated / Non-Coated High-Speed Steel NC Spot Drill

Volume Discount

MISUMI

TiN Coated / Non-Coated High-Speed Steel NC Spot Drill

Long service life that's made possible by the coating technology. Ideal for Hole Chamfering and Centering

Czytaj dalej

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Hole Chamfer	90 ～ 120	2 ～ 20	General Steel[○/◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] / Copper[○]	Single blade	N/A	Cobalt HSS	Available / N/A	TiN / Non-Coated

Cena (bez VAT) od:

8.85 €

Standardowa data wysyłki:

5 dni robocze

TiAlN Coated High-Speed Steel Countersink, 3-Flute / 90°, Regular, Long Shack Model

Volume Discount

MISUMI

TiAlN Coated High-Speed Steel Countersink, 3-Flute / 90°, Regular, Long Shack Model

Ideal for the hole chamfering of countersunk bolts with 90° chamfer.

Czytaj dalej

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Hole Chamfer	-	6.3 ～ 20.5	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	N/A	Cobalt HSS	Available	TiAlN

Cena (bez VAT) od:

23.33 €

Standardowa data wysyłki:

5 dni robocze

TiAlN Coated High-Speed Steel Countersink, 1-Flute / 90°

Volume Discount

MISUMI

TiAlN Coated High-Speed Steel Countersink, 1-Flute / 90°

1-flute type with high versatility in countersink

Czytaj dalej

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Hole Chamfer	-	10 ～ 25	General Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	N/A	Cobalt HSS	Available	TiAlN

Cena (bez VAT) od:

26.68 €

Standardowa data wysyłki:

5 dni robocze

TiAlN Coated High-Speed Steel Countersink, with Holes / 90°

Volume Discount

MISUMI

TiAlN Coated High-Speed Steel Countersink, with Holes / 90°

It is effective in hole chamfering and deburring of light metals.

Czytaj dalej

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Hole Chamfer	-	10 ～ 25	General Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	Single blade	N/A	Cobalt HSS	Available	TiAlN

Cena (bez VAT) od:

26.00 €

Standardowa data wysyłki:

5 dni robocze

TiN-Coated High-Speed Steel Countersink, with Holes / 90°

MISUMI

TiN-Coated High-Speed Steel Countersink, with Holes / 90°

Frequently used standard sizes are offered at affordable prices

Czytaj dalej

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Hole Chamfer	-	10 ～ 35	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	N/A	Cobalt HSS	Available	TiN

Cena (bez VAT) od:

25.71 €

Standardowa data wysyłki:

5 dni robocze

Center Chamfer Mill

ZNIŻKA
Volume Discount

FUKUDA

Center Chamfer Mill

A single product capable of five types of machining: center positioning, chamfering, side surface machining, drilling, and V-grooving.

Czytaj dalej

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Hole Chamfer / V Groove / Drilling / Other	60 ～ 120	4 ～ 40	General Steel[○] / Cast Iron[○] / Resin[○]	Single blade	Available	Cobalt HSS	N/A	Non-Coated

Cena (bez VAT) od:

58.35 €

Cena specjalna

Standardowa data wysyłki:

Towar dostępny w magazynie: 1 dzień roboczy

Niektóre pozycje mogą zostać wysłane tego samego dnia

Chatterless Chamfer Milling Machine

ZNIŻKA
Volume Discount

FUKUDA

Chatterless Chamfer Milling Machine

6-flute blade improves cutting force, fantastic sharpness means zero chatter, horizontal motion during face milling is possible, and the uncomfortable metallic sound during machining is drastically reduced.[Features]· Chamfering.· Drilling machines, milling machines, machining centers.· Horizontal Milling

Czytaj dalej

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Hole Chamfer / Chamfering/Horizontal	60 ～ 120	-	General Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	N/A	Cobalt HSS	N/A	Non-Coated

Cena (bez VAT) od:

41.32 €

Cena specjalna

Standardowa data wysyłki:

Towar dostępny w magazynie: 1 dzień roboczy

Niektóre pozycje mogą zostać wysłane tego samego dnia

Centering tool

EIKOSHA

Centering, countersink, inner and outer chamfering

Czytaj dalej

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Chamfering/Horizontal	90 ～ 118	10 ～ 32	General Steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	-	-	Cobalt HSS	-	-

Cena (bez VAT) od:

110.60 €

Standardowa data wysyłki:

6 dni robocze

Centering tool (taper shank)

EIKOSHA

Centering tool (taper shank)

Centering, countersink, inner and outer chamfering, Morse taper shank

Czytaj dalej

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Chamfering/Horizontal	90 ～ 118	10 ～ 32	General Steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	-	-	Cobalt HSS	-	-

Cena (bez VAT) od:

133.12 €

Standardowa data wysyłki:

6 dni robocze

S Coated Corner Rounding Cutter S-CRC

SANKO MFG

S Coated Corner Rounding Cutter S-CRC

Cutter dedicated to round chamfering with TiCN coating.

Czytaj dalej

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Round Chamfer	-	9 ～ 43	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	-	N/A	Cobalt HSS	Available	TiCN

Cena (bez VAT) od:

81.20 €

Standardowa data wysyłki:

6 dni robocze

HSS HG Center Drill, A Type, 60°

Volume Discount

IWATA TOOL

HSS HG Center Drill, A Type, 60°

[Features]· High-grade center drill for mass production.· Thoroughly improves tact time and achieves a stable life.· Center drill improved for mass production.· Small diameter sizes, in particular, boast life several times longer than conventional center drills

Czytaj dalej

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning)	60	0.3 ～ 1	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Single blade	N/A	Cobalt HSS	N/A	-

Cena (bez VAT) od:

10.18 €

Standardowa data wysyłki:

6 dni robocze

Counter Sink (Titanium Coating)

ZNIŻKA
Volume Discount

TRUSCO NAKAYAMA

Counter Sink (Titanium Coating)【1 do 6 szt.】

[Characteristics] Uses cobalt high speed steel as its base metal for excellent abrasion and heat resistance. Surface hardening is high thanks to its surface titanium coating finish, with improved heat-resistance, wear-resistance and sharpness compared to cobalt high-speed steel. Uses a 3-flute blade edge shape for good cutting chip discharge, giving a clean finish. [Application] Work Material: Iron, Cast Material, Stainless Steel. Chamfering. Deburring. Countersinking.

Czytaj dalej

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Hole Chamfer / Chamfering/Horizontal	90	-	General Steel[○] / Stainless Steel[○] / Cast Iron[○]	Single blade	N/A	Cobalt HSS	Available	TiN

Cena (bez VAT) od:

31.81 €

Cena specjalna

Standardowa data wysyłki:

Towar dostępny w magazynie: 1 dzień roboczy

Niektóre pozycje mogą zostać wysłane tego samego dnia

Counter Sink

ZNIŻKA
Volume Discount

TRUSCO NAKAYAMA

[Characteristics] Uses cobalt high speed steel as its base metal for excellent abrasion and heat resistance. Uses a 3-flute blade edge shape for good cutting chip discharge, giving a clean finish. [Application] Work Material: Iron, Cast Material, Stainless Steel. Chamfering. Deburring. Countersinking.

Czytaj dalej

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Hole Chamfer	90	-	General Steel[○] / Stainless Steel[○] / Cast Iron[○]	Single blade	N/A	Cobalt HSS	N/A	-

Cena (bez VAT) od:

19.85 €

Cena specjalna

Standardowa data wysyłki:

Towar dostępny w magazynie: 1 dzień roboczy

Możliwa wysyłka tego samego dnia

CS2S Type II Chamfering Cutter (Single Flute), Straight Shank

Volume Discount

OKAZAKI SEIKO

CS2S Type II Chamfering Cutter (Single Flute), Straight Shank

1-flute type. For steel and stainless steel. All products are TiN coated.

Czytaj dalej

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Hole Chamfer	90	66	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	N/A	Cobalt HSS	Available	TiN

Cena (bez VAT) od:

357.58 €

Standardowa data wysyłki:

6 dni robocze

CS3S Type III Chamfering Cutter (3-Flute), Straight Shank

Volume Discount

OKAZAKI SEIKO

CS3S Type III Chamfering Cutter (3-Flute), Straight Shank

3-flute type. For steel and stainless steel. All products are TiN coated.

Czytaj dalej

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Hole Chamfer	90	20	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	N/A	Cobalt HSS	Available	TiN

Cena (bez VAT) od:

108.62 €

Standardowa data wysyłki:

6 dni robocze

NC Spotting Drill 90° J557

Volume Discount

GUHRING

NC Spotting Drill 90° J557

Allows simultaneous centering and chamfering. Cobalt HSS boasts excellent heat and abrasion resistance.

Czytaj dalej

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Hole Chamfer	90	3 ～ 20	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	-	Cobalt HSS	N/A	-

Cena (bez VAT) od:

43.85 €

Standardowa data wysyłki:

6 dni robocze

Cobalt High-Speed Steel Counter Sink (Co5), 3-Fluted, 90°, CBN Polish

NOGAJAPAN

Cobalt High-Speed Steel Counter Sink (Co5), 3-Fluted, 90°, CBN Polish

[Features]· Noga Titanium Coated Countersinks are made of heat-treated HSS with a CBN ground blade and titanium nitride coating.· The deep sharp blade and accurate cutting ensure high precision and excellent cutting performance.· Recommended for steel, cast items, non-ferrous metals, and light metals.· More effective at relatively slow cutting speeds (10 to 20 m/min).

Czytaj dalej

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
-	90	6.3 ～ 31	Stainless Steel[○]	Single blade	-	Cobalt HSS	-	-

Cena (bez VAT) od:

35.45 €

Standardowa data wysyłki:

6 dni robocze

Chamfering Cutter (for Spool Bushing) RC

EIKOSHA

Chamfering Cutter (for Spool Bushing) RC

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Round Chamfer	-	-	General Steel[○] / Aluminum[○] / Copper[○]	-	-	Cobalt HSS	N/A	-

Cena (bez VAT) od:

104.76 €

Standardowa data wysyłki:

6 dni robocze

Starting Drill GSS

Volume Discount

EIKOSHA

Starting Drill GSS

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Centering (Positioning) / Hole Chamfer / Drilling	90 ～ 135	3 ～ 25	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	-	Cobalt HSS	Available	TiN

Cena (bez VAT) od:

22.30 €

Standardowa data wysyłki:

6 dni robocze

Mini Corner R Cutter (Half) MCRC

EIKOSHA

Mini Corner R Cutter (Half) MCRC

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Hole Chamfer / Chamfering/Horizontal / Round Chamfer	-	3 ～ 19	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	-	Cobalt HSS	N/A	-

Cena (bez VAT) od:

95.90 €

Standardowa data wysyłki:

6 dni robocze

Umbrella-Type Cutter w/ Handle PCS

EIKOSHA

Umbrella-Type Cutter w/ Handle PCS

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Hole Chamfer	60 ～ 90	65 ～ 100	General Steel[○] / Aluminum[○] / Copper[○]	-	-	Cobalt HSS	N/A	-

Cena (bez VAT) od:

781.03 €

Standardowa data wysyłki:

6 dni robocze

Blade for Chamfer / Deburring

Volume Discount

NOGAJAPAN

Blade for Chamfer / Deburring【10 szt.】

[Features] One blade for chamfering and deburring.Compatible base body: compatible holder (EL04003), compatible handle (NG3000), compatible holder (UH1000, SC1400), compatible handle (NC5100), compatible handle (NC5200).

Czytaj dalej

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Other	-	-	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	-	-	Cobalt HSS	-	-

Cena (bez VAT) od:

121.79 €

Standardowa data wysyłki:

6 dni robocze

Chamfering Reamer (3-Flute) MC

DAIICHITOOL

Chamfering Reamer (3-Flute) MC

[Features] Bevel reamers with an overall length of 55 to 95 mm and handle diameters of 8 mm, 10 mm and 12 mm.

Czytaj dalej

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Chamfering/Horizontal	60° ～ 90°	8 ～ 46	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Cobalt HSS	-	-

Cena (bez VAT) od:

54.22 €

Standardowa data wysyłki:

8 dni robocze

WATERMILLS ® 3-Flute Countersink WMC5TA 90° 5% Cobalt High-Speed Steel + TiAlN Coating

WATERMILLS

WATERMILLS ® 3-Flute Countersink WMC5TA 90° 5% Cobalt High-Speed Steel + TiAlN Coating

[Features] It has 3 flutes.Applications: Hole chamfering Tip angle (θ): 90°Coating type: TiAIN

Czytaj dalej

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Hole Chamfer	90°	4.3 ～ 31	-	Single blade	-	Cobalt HSS	Available	TiAlN

Cena (bez VAT) od:

41.77 €

Standardowa data wysyłki:

8 dni robocze

WATERMILLS ® 1-Flute Countersink WMSFC 90° for Drill, Chamfer, for Veneer

WATERMILLS

WATERMILLS ® 1-Flute Countersink WMSFC 90° for Drill, Chamfer, for Veneer

[Material] 5% cobalt high speed steelApplications: Hole chamferTip angle (θ): 90°Coating type: uncoatedTotal length (mm): 78 (±).

Czytaj dalej

Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
Hole Chamfer	90°	25.0(+0.3)	-	Single blade	-	Cobalt HSS	N/A	Non-Coated

Cena (bez VAT) od:

72.50 €

Standardowa data wysyłki:

6 dni robocze

TRUSCO NAKAYAMA
TRUSCO MC Chamfer / Reamer 60°
[Features]· Achieves a neat surface finish, with high durability and heat resistance for long tool life. [Applications]· Chamfering, end milling
Czytaj dalej
Application Tip angle (θ) Tool Diameter (D)(mm) work material Single blade, two blades Peripheral Blade Y/N Tool Material Type Coating Y/N Coating Type
Chamfering/Horizontal 60 - - - - Cobalt HSS N/A -
Cena (bez VAT) od:
57.00 €
Standardowa data wysyłki:
6 dni robocze
Konfiguruj

Ostatnio oglądane produkty

MISUMI
Locating pins, Centring pins / head shape selectable / chamfered flat head / fastening variant selectable