Straight Reamers (Carbide)（work material：Quenched and tempered steel）

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 10 Days or Less 15 Days or Less 24 Days or Less

?* Information on days to ship and prices

Carbide Straight Reamer

OSG

The cutting material used is carbide.
-Provide sufficient cutting fluid.
-Use a chuck with high precision.
-It may be necessary to change the conditions depending on the workpiece and the rigidity of the machine.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	35.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

Carbide µ (Mu) Reamer

FPTOOLS

[Features]
· Easy tool management: As well as being suitable for high-precision drilling as the nominal dimensions are manufactured with 1 μm increments, 11,800 sizes are available for selection.
· Ultra-high precision: Tolerance of 0 to less than +1 μm is ideal for drilling ultra-precision holes.
· High durability: Excellent durability, maintaining precision over long periods of time.
· Application: General work materials.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	63.59 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

Carbide Reamer G Series

FPTOOLS

[Features]
· The most universally usable reamer among all series of carbide reamers.
· Approximately 5 to 10 times greater durability than conventional HSS reamers, maintaining its precision for long periods of time.
· Processing hole precision is also superior to the HSS reamer, allowing use at higher cutting speed and feeding speed.
· Because the pitch is 0.005 mm, there are no breaks between sizes and negative tolerance hole drilling is also possible.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	24.42 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model

MISUMI

[Features]
-Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function
-Direct reaming is possible without correction by an end mill after drilling a pilot hole

Select to compare

Configure now
Min. Shipping Days ：	7 Days

Carbide Straight Reamer, Regular Model

MISUMI

[Features]
-Standard carbide reamer with custom dimensions
-Custom dimensions can be specified in units of 0.01 mm for the cutting diameter and 0.5 mm for the flute length

Select to compare

Configure now
Min. Shipping Days ：	7 Days

Carbide Precision Straight Reamer

MISUMI

It is capable of finishing holes with clean surface roughness compared to the normal reamer.

Select to compare

Configure now
Min. Shipping Days ：	8 Days

Carbide Powerful Reamer (Straight Shank) BCPR

OKAZAKI SEIKO

Flat tip type with straight shank specification. Torsion angle 45°

Select to compare

Configure now
Starting from^∗ ：	137.30 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model

MISUMI

Select to compare

Configure now
Min. Shipping Days ：	7 Days

Straight Reamer with Carbide Bottom Blade

MISUMI

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	54.96 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining

MISUMI

[Features]
-Carbide material enables high-speed cutting, which greatly improves efficiency compared to high-speed steel reamers
-TS-coated products are ideal for machining high-hardness steels with 40 HRC or more (TSC-XHR).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	35.08 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Solid Pivot Reamer CSRR-3

EIKOSHA

Small Diameter Use Reamer φ193 Shank

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	51.73 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Solid Reamer Shank-Through Coolant CSGR-A

EIKOSHA

[Features]
· The cutting speed is approximately 2.5 times that of conventional coating reamers.
· The pinpoint lubrication improves the weld resistance and machined surface roughness

Select to compare

Configure now
Starting from^∗ ：	200.02 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model

MISUMI

[Features]
-Since it has a flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function
-Direct reaming is possible without correction by an end mill after drilling a pilot hole
-Long type enables machining of deep holes

Select to compare

Configure now
Min. Shipping Days ：	8 Days

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model

MISUMI

Select to compare

Configure now
Min. Shipping Days ：	7 Days

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model

MISUMI

Select to compare

Configure now
Min. Shipping Days ：	8 Days

Carbide Straight Reamer, Long Model

MISUMI

[Features]
-Standard carbide reamer with custom dimensions
-Custom dimensions can be specified in units of 0.01 mm for cutting diameter and 0.5 mm for flute length
-Long design enables reaming of deep areas.

Select to compare

Configure now
Min. Shipping Days ：	8 Days

Strong Reamer

NEW STRONG

Select to compare

Configure now
Starting from^∗ ：	140.89 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Strong Cutter

NEW STRONG

Select to compare

Configure now
Starting from^∗ ：	304.01 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model

MISUMI

Select to compare

Configure now
Min. Shipping Days ：	8 Days

Carbide Pilot Hole Correction Boring Bit

MISUMI

In case the hole pitch has an intersection or the inclination tolerance of the hole is demanding.
By using it before finishing the reamer, the bend of the hole can be modified.

Select to compare

Configure now
Min. Shipping Days ：	8 Days

Carbide Boring End Mill

MISUMI

[Features]
-Unique cutting edge shape enables drilling of various materials such as stainless steel and aluminium alloys
-Drilling is possible under cutting conditions of 60 m/min or more
-Compatible with various applications such as. Hole machining and high precision It can be used for finishing holes as it achieves the same dimensional accuracy and surface roughness as drilling and reaming
-Ideal for drilling precision threads with a high percentage of thread engagement
-It is able to correct variations in the diameter of the pilot hole, allows for improved hole position accuracy

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	110.92 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

Coated Solid Reamer CSR-C

EIKOSHA

The Usage of the TICN647 Coating Prevents Deposition, and Improves Finished Surface Roughness

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	65.29 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Carbide Reamer C Series

FPTOOLS

[Features]
· Ultra-low price contributes to cost reductions.
· Carbide is used for the reamer, greatly reducing the price.
· It will help reduce the machining costs by the improvement of tool life and reduction of tool costs.
· Deep hole machining possible: Thinner shank diameter makes it possible to machine deep holes.
· The processing range can be expanded.
· High-precision: Precision equivalent to the best-selling carbide reamer "G-Series".
· Can be used with peace of mind

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	41.92 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

BCCR Carbide Chucking Reamer (Straight Shank)

OKAZAKI SEIKO

Tip brazing type, straight shank specification. The neck is thinner than the blade diameter to enable deep hole drilling.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	115.61 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

BCCRT Carbide Chucking Reamer (Morse Taper Shank)

OKAZAKI SEIKO

Tip brazing type, Morse taper shank specification. The neck is thinner than the blade diameter to enable deep hole drilling.

Select to compare

Configure now
Starting from^∗ ：	137.30 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

CCR Carbide Chucking Reamer

OKAZAKI SEIKO

A solid type. The neck is thinner than the blade diameter to enable deep hole drilling.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	35.79 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

CCRM Carbide Chucking Reamer (Hundredths Range)

OKAZAKI SEIKO

A solid type. The neck is thinner than the blade diameter to enable deep hole drilling.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	37.91 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

CSR Carbide Short Reamer (Straight Shank)

OKAZAKI SEIKO

Solid type. Boasts life ten times longer than HSS reamer. Corresponds to a wide range of workpieces from cast iron to steel. Capable of high accuracy drilling. Reduces machining time.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	31.56 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 30/11/2024

CSRM Short Carbide Reamer (Straight Shank) (Hundredths Range)

OKAZAKI SEIKO

A solid type. Ideal dimensions added (0 to 0.005 dimensional tolerance). 0.005 mm increments added (exact dimensions ±0.03).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	23.85 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Short Powerful Carbide Reamer (0.01 mm Jump) CPRSM

OKAZAKI SEIKO

A solid type. The roughing tip ensures uniform removal and stable specification dimensions. Torsional angle 35°

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	41.07 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Powerful Carbide Reamer Hundredths (0.01 mm Jump) CPRM

OKAZAKI SEIKO

A solid type. The roughing tip ensures uniform removal and stable specification dimensions. Torsional angle 45°

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	78.09 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Carbide Chucking Reamer CCRFM (OK Tough Coat)

OKAZAKI SEIKO

[Features]
・ OK Tough Coat realizes high speed machining and long life
・ Solid type
・ Capable of deep hole machining thanks to a neck diameter thinner than the blade diameter

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	49.53 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Carbide Hard Reamer CKRH / CKRHM

OKAZAKI SEIKO

[Features]
・ OK Hard Coat enables high speed cutting of difficult-to-cut materials such as high-hardness materials and heat-resistant alloys.
・Can be used to machine high-hardness materials of up to HRC62.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	77.03 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Powerful Reamer CPRFM (OK Tough Coat)

OKAZAKI SEIKO

[Features]
・OKTough Coat realizes high speed machining and long life
・ Solid type
・The finishing dimensions are stabilized thanks to the uniform cutting margin achieved by the rough cutting edge at the tip
・ Torsion angle 45°

Select to compare

Configure now
Starting from^∗ ：	101.35 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Carbide Short Powerful Reamer CPRSFM (OK Tough Coat)

OKAZAKI SEIKO

[Features]
・OKTough Coat realizes high speed machining and long life
・ Solid type
・ The finishing dimensions are stabilized thanks to the uniform cutting margin achieved by the rough cutting edge at the tip
・ Torsion angle 35°

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	49.53 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Carbide Short Reamer CSRFM (OK Tough Coat)

OKAZAKI SEIKO

[Features]
・ OK Tough Coat realizes high speed machining and long life
・ Solid type

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	55.88 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Tool Diameter(mm)
Shank Type
work material
Groove Length(mm)
Coating Y/N
Groove Shape
Base Blade Y/N
Tip diameter
Large End Diameter

	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing ends 30/11/2024	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	OSG	FPTOOLS	FPTOOLS	MISUMI	MISUMI	MISUMI	OKAZAKI SEIKO	MISUMI	MISUMI	MISUMI	EIKOSHA	EIKOSHA	MISUMI	MISUMI	MISUMI	MISUMI	NEW STRONG	NEW STRONG	MISUMI	MISUMI	MISUMI	EIKOSHA	FPTOOLS	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO
Product Series	Carbide Straight Reamer	Carbide µ (Mu) Reamer	Carbide Reamer G Series	Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model	Carbide Straight Reamer, Regular Model	Carbide Precision Straight Reamer	Carbide Powerful Reamer (Straight Shank) BCPR	Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model	Straight Reamer with Carbide Bottom Blade	Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining	Carbide Solid Pivot Reamer CSRR-3	Carbide Solid Reamer Shank-Through Coolant CSGR-A	Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model	Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model	Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model	Carbide Straight Reamer, Long Model	Strong Reamer	Strong Cutter	Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model	Carbide Pilot Hole Correction Boring Bit	Carbide Boring End Mill	Coated Solid Reamer CSR-C	Carbide Reamer C Series	BCCR Carbide Chucking Reamer (Straight Shank)	BCCRT Carbide Chucking Reamer (Morse Taper Shank)	CCR Carbide Chucking Reamer	CCRM Carbide Chucking Reamer (Hundredths Range)	CSR Carbide Short Reamer (Straight Shank)	CSRM Short Carbide Reamer (Straight Shank) (Hundredths Range)	Short Powerful Carbide Reamer (0.01 mm Jump) CPRSM	Powerful Carbide Reamer Hundredths (0.01 mm Jump) CPRM	Carbide Chucking Reamer CCRFM (OK Tough Coat)	Carbide Hard Reamer CKRH / CKRHM	Carbide Powerful Reamer CPRFM (OK Tough Coat)	Carbide Short Powerful Reamer CPRSFM (OK Tough Coat)	Carbide Short Reamer CSRFM (OK Tough Coat)
Starting from^∗	35.50 € *Unit price with basic configuration Volume Discount	63.59 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	24.42 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	-	-	-	137.30 € *Unit price with basic configuration	-	54.96 € *Unit price with basic configuration Volume Discount	35.08 € *Unit price with basic configuration Volume Discount	51.73 € *Unit price with basic configuration Volume Discount	200.02 € *Unit price with basic configuration	-	-	-	-	140.89 € *Unit price with basic configuration	304.01 € *Unit price with basic configuration	-	-	110.92 € *Unit price with basic configuration Volume Discount	65.29 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	41.92 € *Unit price with basic configuration Volume Discount	115.61 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	137.30 € *Unit price with basic configuration	35.79 € *Unit price with basic configuration Volume Discount	37.91 € *Unit price with basic configuration Volume Discount	31.56 € *Unit price with basic configuration Volume Discount	23.85 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 Volume Discount	41.07 € *Unit price with basic configuration Volume Discount	78.09 € *Unit price with basic configuration Volume Discount	49.53 € *Unit price with basic configuration Volume Discount	77.03 € *Unit price with basic configuration Volume Discount	101.35 € *Unit price with basic configuration	49.53 € *Unit price with basic configuration Volume Discount	55.88 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	6 Days	Same day	Same day	7 Days	7 Days	8 Days	10 Days	7 Days	5 Days	5 Days	6 Days	6 Days	8 Days	7 Days	8 Days	8 Days	6 Days	6 Days	8 Days	8 Days	5 Days	Same day	6 Days	Same day	10 Days	6 Days	10 Days	6 Days	Same day	10 Days	10 Days	10 Days	6 Days	10 Days	10 Days	10 Days
Tool Diameter(mm)	0.3 ～ 13.05	0.5 ～ 10.009	0.2 ～ 12.1	0.4 ～ 15.995	0.3 ～ 15.99	0.5 ～ 5.9	12.5 ～ 30	0.3 ～ 15.995	3 ～ 10.01	1 ～ 10	0.2 ～ 3	2.97 ～ 20.03	0.3 ～ 5.995	0.4 ～ 15.995	0.4 ～ 5.995	0.3 ～ 5.99	6.00 (for H7) ～ 13.00 (for H7)	5.8 ～ 12.8	0.4 ～ 5.995	1.8 ～ 5	2 ～ 10	0.8 ～ 12.05	2.91 ～ 12.1	12.5 ～ 30	12.5 ～ 30	3 ～ 12	2.95 ～ 12.05	1 ～ 20	0.99 ～ 7.44	2.95 ～ 12.05	2.95 ～ 12.05	2.95 ～ 2.96	2.95 ～ 12	2.95 ～ 2.96	2.95 ～ 2.96	2.95 ～ 2.96
Shank Type	End Mill Shank / Straight Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	Straight Shank	End Mill Shank	End Mill Shank	End Mill Shank	Straight Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	Straight Shank	Morse Taper Shank	Straight Shank	Straight Shank	Straight Shank	Straight Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank
work material	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○/◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]
Groove Length(mm)	-	5 ～ 40	3 ～ 45	0.5 ～ 48	0.5 ～ 48	3 ～ 10	36 ～ 46	0.5 ～ 48	27 ～ 40	12 ～ 40	3 ～ 25	19 ～ 25	0.5 ～ 34	0.5 ～ 48	0.5 ～ 34	0.5 ～ 34	20 ～ 30	20 ～ 30	0.5 ～ 34	-	12 ～ 52	12 ～ 45	20 ～ 25	36 ～ 46	36 ～ 46	26 ～ 31	26 ～ 31	12 ～ 45	12 ～ 35	22 ～ 35	20 ～ 31	26 ～ 31	-	26 ～ 31	30	27 ～ 30
Coating Y/N	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	Available ～ N/A	N/A	Available	N/A	N/A	N/A	N/A	-	-	N/A	N/A	Available	Available	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	Available	Available	Available	Available	Available
Groove Shape	Straight	Straight	Straight	Straight	Straight	Straight	Helical	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Spiral	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Helical	Helical	Straight	Spiral	Spiral	Spiral	Straight
Base Blade Y/N	N/A	N/A	N/A	Available	N/A	N/A	N/A	Available	Available	N/A	N/A	N/A	Available	Available	Available	N/A	-	-	Available	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A
Tip diameter	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Large End Diameter	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Filter by:

Stock

- Show only stock items
Clear

Tool Diameter(mm)
0.2

0.21

0.22

0.23

0.24

0.25

0.26

0.27

0.28

0.29

0.3

0.31

0.315

0.32

0.325

0.33

0.335

0.34

0.345

0.35

0.355

0.36

0.365

0.37

0.375

0.38

0.385

0.39

0.395

0.4

0.405

0.41

0.415

0.42

0.425

0.43

0.435

0.44

0.445

0.45

0.455

0.46

0.465

0.47

0.475

0.48

0.485

0.49

0.495

0.5

0.501

0.502

0.503

0.504

0.505

0.506

0.507

0.508

0.509

0.51

0.511

0.512

0.513

0.514

0.515

0.516

0.517

0.518

0.519

0.52

0.521

0.522

0.523

0.524

0.525

0.526

0.527

0.528

0.529

0.53

0.531

0.532

0.533

0.534

0.535

0.536

0.537

0.538

0.539

0.54

0.541

0.542

0.543

0.544

0.545

0.546

0.547

0.548

0.549

0.55

0.551

0.552

0.553

0.554

0.555

0.556

0.557

0.558

0.559

0.56

0.561

0.562

0.563

0.564

0.565

0.566

0.567

0.568

0.569

0.57

0.571

0.572

0.573

0.574

0.575

0.576

0.577

0.578

0.579

0.58

0.581

0.582

0.583

0.584

0.585

0.586

0.587

0.588

0.589

0.59

0.591

0.592

0.593

0.594

0.595

0.596

0.597

0.598

0.599

0.6

0.601

0.602

0.603

0.604

0.605

0.606

0.607

0.608

0.609

0.61

0.611

0.612

0.613

0.614

0.615

0.616

0.617

0.618

0.619

0.62

0.621

0.622

0.623

0.624

0.625

0.626

0.627

0.628

0.629

0.63

0.631

0.632

0.633

0.634

0.635

0.636

0.637

0.638

0.639

0.64

0.641

0.642

0.643

0.644

0.645

0.646

0.647

0.648

0.649

0.65

0.651

0.652

0.653

0.654

0.655

0.656

0.657

0.658

0.659

0.66

0.661

0.662

0.663

0.664

0.665

0.666

0.667

0.668

0.669

0.67

0.671

0.672

0.673

0.674

0.675

0.676

0.677

0.678

0.679

0.68

0.681

0.682

0.683

0.684

0.685

0.686

0.687

0.688

0.689

0.69

0.691

0.692

0.693

0.694

0.695

0.696

0.697

0.698

0.699

0.7

0.701

0.702

0.703

0.704

0.705

0.706

0.707

0.708

0.709

0.71

0.711

0.712

0.713

0.714

0.715

0.716

0.717

0.718

0.719

0.72

0.721

0.722

0.723

0.724

0.725

0.726

0.727

0.728

0.729

0.73

0.731

0.732

0.733

0.734

0.735

0.736

0.737

0.738

0.739

0.74

0.741

0.742

0.743

0.744

0.745

0.746

0.747

0.748

0.749

0.75

0.751

0.752

0.753

0.754

0.755

0.756

0.757

0.758

0.759

0.76

0.761

0.762

0.763

0.764

0.765

0.766

0.767

0.768

0.769

0.77

0.771

0.772

0.773

0.774

0.775

0.776

0.777

0.778

0.779

0.78

0.781

0.782

0.783

0.784

0.785

0.786

0.788

0.789

0.79

0.791

0.792

0.793

0.794

0.795

0.796

0.797

0.798

0.799

0.8

0.801

0.802

0.803

0.804

0.805

0.806

0.807

0.808

0.809

0.81

0.811

0.812

0.813

0.814

0.815

0.816

0.817

0.818

0.819

0.82

0.821

0.822

0.823

0.824

0.825

0.826

0.827

0.828

0.829

0.83

0.831

0.832

0.833

0.834

0.835

0.836

0.837

0.838

0.839

0.84

0.841

0.842

0.843

0.844

0.845

0.846

0.847

0.848

0.849

0.85

0.851

0.852

0.853

0.854

0.855

0.856

0.857

0.858

0.859

0.86

0.861

0.862

0.863

0.864

0.865

0.866

0.867

0.868

0.869

0.87

0.871

0.872

0.873

0.874

0.875

0.876

0.877

0.878

0.879

0.88

0.881

0.882

0.883

0.884

0.885

0.886

0.887

0.888

0.889

0.89

0.891

0.892

0.893

0.894

0.895

0.896

0.897

0.898

0.899

0.9

0.901

0.902

0.903

0.904

0.905

0.906

0.907

0.908

0.909

0.91

0.911

0.912

0.913

0.914

0.915

0.916

0.917

0.918

0.919

0.92

0.921

0.922

0.923

0.924

0.925

0.926

0.927

0.928

0.929

0.93

0.932

0.933

0.934

0.935

0.936

0.937

0.938

0.939

0.94

0.941

0.942

0.943

0.944

0.945

0.946

0.947

0.948

0.949

0.95

0.951

0.952

0.953

0.954

0.955

0.956

0.957

0.958

0.959

0.96

0.961

0.962

0.963

0.964

0.965

0.966

0.967

0.968

0.969

0.97

0.971

0.972

0.973

0.974

0.975

0.976

0.977

0.978

0.979

0.98

0.981

0.982

0.983

0.984

0.985

0.986

0.987

0.988

0.989

0.99

0.991

0.992

0.993

0.994

0.995

0.996

0.997

0.998

0.999

1

1.001

1.002

1.003

1.004

1.005

1.006

1.007

1.008

1.009

1.01

1.011

1.012

1.013

1.014

1.015

1.016

1.017

1.018

1.019

1.02

1.021

1.022

1.023

1.024

1.025

1.026

1.027

1.029

1.03

1.031

1.032

1.033

1.034

1.035

1.036

1.037

1.038

1.039

1.04

1.041

1.042

1.043

1.044

1.045

1.046

1.047

1.048

1.049

1.05

1.051

1.052

1.053

1.054

1.055

1.056

1.057

1.058

1.059

1.06

1.061

1.062

1.063

1.064

1.065

1.066

1.067

1.068

1.069

1.07

1.071

1.072

1.073

1.074

1.075

1.076

1.077

1.078

1.079

1.08

1.081

1.082

1.083

1.084

1.085

1.086

1.087

1.088

1.089

1.09

1.091

1.092

1.093

1.094

1.095

1.096

1.097

1.098

1.099

1.1

1.101

1.102

1.103

1.104

1.105

1.106

1.107

1.108

1.109

1.11

1.111

1.112

1.113

1.114

1.115

1.116

1.117

1.118

1.119

1.12

1.121

1.122

1.123

1.124

1.125

1.126

1.127

1.128

1.129

1.13

1.131

1.132

1.133

1.134

1.135

1.136

1.137

1.138

1.139

1.14

1.141

1.142

1.143

1.144

1.145

1.146

1.147

1.148

1.149

1.15

1.151

1.152

1.153

1.154

1.155

1.156

1.157

1.158

1.159

1.16

1.161

1.162

1.163

1.164

1.165

1.166

1.167

1.168

1.169

1.17

1.171

1.172

1.173

1.174

1.175

1.176

1.177

1.178

1.179

1.18

1.181

1.182

1.183

1.184

1.185

1.186

1.187

1.188

1.189

1.19

1.191

1.192

1.194

1.195

1.196

1.197

1.198

1.199

1.2

1.201

1.202

1.203

1.204

1.205

1.206

1.207

1.208

1.209

1.21

1.211

1.212

1.213

1.214

1.215

1.216

1.217

1.218

1.219

1.22

1.221

1.222

1.223

1.224

1.225

1.226

1.227

1.228

1.229

1.23

1.231

1.232

1.233

1.234

1.235

1.236

1.237

1.238

1.239

1.24

1.241

1.242

1.243

1.244

1.245

1.246

1.247

1.248

1.249

1.25

1.251

1.252

1.253

1.254

1.255

1.256

1.257

1.258

1.259

1.26

1.261

1.262

1.263

1.264

1.265

1.266

1.267

1.268

1.269

1.27

1.271

1.272

1.273

1.274

1.275

1.276

1.277

1.278

1.279

1.28

1.281

1.282

1.283

1.284

1.285

1.286

1.287

1.288

1.289

1.29

1.291

1.292

1.293

1.294

1.295

1.296

1.297

1.298

1.299

1.3

1.301

1.302

1.303

1.304

1.305

1.306

1.307

1.309

1.31

1.311

1.312

1.313

1.314

1.315

1.316

1.317

1.318

1.319

1.32

1.321

1.322

1.323

1.324

1.325

1.326

1.327

1.328

1.329

1.33

1.331

1.332

1.333

1.334

1.335

1.336

1.337

1.338

1.339

1.34

1.341

1.342

1.343

1.344

1.345

1.346

1.347

1.348

1.349

1.35

1.351

1.352

1.353

1.354

1.355

1.356

1.357

1.358

1.359

1.36

1.361

1.362

1.363

1.364

1.365

1.366

1.367

1.368

1.369

1.37

1.371

1.372

1.373

1.374

1.375

1.376

1.377

1.378

1.379

1.38

1.381

1.382

1.383

1.384

1.385

1.386

1.387

1.388

1.389

1.39

1.391

1.392

1.393

1.394

1.395

1.396

1.397

1.398

1.399

1.4

1.401

1.402

1.403

1.404

1.405

1.406

1.407

1.408

1.409

1.41

1.411

1.412

1.413

1.414

1.415

1.416

1.418

1.419

1.42

1.421

1.422

1.423

1.424

1.425

1.426

1.427

1.428

1.429

1.43

1.431

1.432

1.433

1.434

1.435

1.436

1.437

1.438

1.439

1.44

1.441

1.442

1.443

1.444

1.445

1.446

1.447

1.448

1.449

1.45

1.451

1.452

1.453

1.454

1.455

1.456

1.457

1.458

1.459

1.46

1.461

1.462

1.463

1.464

1.465

1.466

1.467

1.468

1.469

1.47

1.471

1.472

1.473

1.474

1.475

1.476

1.477

1.478

1.479

1.48

1.481

1.482

1.483

1.484

1.485

1.486

1.487

1.488

1.489

1.49

1.491

1.492

1.493

1.494

1.495

1.496

1.497

1.498

1.499

1.5

1.501

1.502

1.503

1.504

1.505

1.506

1.507

1.508

1.509

1.51

1.511

1.512

1.513

1.514

1.515

1.516

1.517

1.518

1.519

1.52

1.521

1.522

1.523

1.524

1.525

1.526

1.527

1.528

1.529

1.53

1.531

1.532

1.533

1.534

1.535

1.536

1.537

1.538

1.539

1.54

1.541

1.542

1.543

1.544

1.545

1.546

1.547

1.548

1.549

1.55

1.551

1.552

1.553

1.554

1.555

1.556

1.557

1.558

1.559

1.56

1.561

1.562

1.563

1.564

1.565

1.566

1.567

1.568

1.569

1.57

1.571

1.572

1.573

1.574

1.575

1.576

1.577

1.578

1.579

1.58

1.581

1.582

1.583

1.584

1.585

1.586

1.587

1.588

1.589

1.59

1.591

1.592

1.593

1.594

1.595

1.596

1.597

1.598

1.599

1.6

1.601

1.602

1.603

1.604

1.605

1.606

1.607

1.608

1.609

1.61

1.611

1.612

1.613

1.614

1.615

1.616

1.617

1.618

1.619

1.62

1.621

1.622

1.623

1.624

1.625

1.626

1.627

1.628

1.629

1.63

1.631

1.632

1.633

1.634

1.635

1.636

1.637

1.638

1.639

1.64

1.641

1.642

1.643

1.644

1.645

1.646

1.647

1.648

1.649

1.65

1.651

1.652

1.653

1.654

1.655

1.656

1.657

1.658

1.659

1.66

1.661

1.662

1.663

1.664

1.665

1.666

1.667

1.668

1.669

1.67

1.671

1.672

1.673

1.674

1.675

1.676

1.677

1.678

1.679

1.68

1.681

1.682

1.683

1.684

1.685

1.686

1.687

1.688

1.689

1.69

1.691

1.692

1.693

1.694

1.695

1.696

1.697

1.698

1.699

1.7

1.701

1.702

1.703

1.704

1.705

1.706

1.707

1.708

1.709

1.71

1.711

1.712

1.713

1.714

1.715

1.716

1.717

1.718

1.719

1.72

1.721

1.722

1.723

1.724

1.725

1.726

1.727

1.728

1.729

1.73

1.731

1.732

1.733

1.734

1.735

1.736

1.737

1.738

1.739

1.74

1.741

1.742

1.743

1.744

1.745

1.746

1.747

1.748

1.749

1.75

1.751

1.752

1.753

1.754

1.755

1.756

1.757

1.758

1.759

1.76

1.761

1.762

1.763

1.764

1.765

1.766

1.767

1.768

1.769

1.77

1.771

1.772

1.773

1.774

1.775

1.776

1.777

1.778

1.779

1.78

1.781

1.782

1.783

1.784

1.785

1.786

1.787

1.788

1.789

1.79

1.791

1.792

1.793

1.794

1.795

1.796

1.797

1.798

1.799

1.8

1.801

1.802

1.803

1.804

1.805

1.806

1.807

1.808

1.809

1.81

1.811

1.812

1.813

1.814

1.815

1.816

1.817

1.818

1.819

1.82

1.821

1.822

1.823

1.824

1.825

1.826

1.827

1.828

1.829

1.83

1.831

1.832

1.833

1.834

1.835

1.836

1.837

1.838

1.839

1.84

1.841

1.842

1.843

1.844

1.845

1.846

1.847

1.848

1.849

1.85

1.851

1.852

1.853

1.854

1.855

1.856

1.857

1.858

1.859

1.86

1.861

1.862

1.863

1.864

1.865

1.866

1.867

1.868

1.869

1.87

1.871

1.872

1.873

1.874

1.875

1.876

1.877

1.878

1.879

1.88

1.881

1.882

1.883

1.884

1.885

1.886

1.887

1.888

1.889

1.89

1.891

1.892

1.893

1.894

1.895

1.896

1.897

1.898

1.899

1.9

1.902

1.903

1.904

1.905

1.906

1.907

1.908

1.909

1.91

1.911

1.912

1.913

1.914

1.915

1.916

1.917

1.918

1.919

1.92

1.921

1.922

1.923

1.924

1.925

1.926

1.927

1.928

1.929

1.93

1.931

1.932

1.933

1.934

1.935

1.936

1.937

1.938

1.939

1.94

1.941

1.942

1.943

1.944

1.945

1.946

1.947

1.948

1.949

1.95

1.951

1.952

1.953

1.954

1.955

1.956

1.957

1.958

1.959

1.96

1.961

1.962

1.963

1.964

1.965

1.966

1.967

1.968

1.969

1.97

1.971

1.972

1.973

1.974

1.975

1.976

1.977

1.978

1.979

1.98

1.981

1.982

1.983

1.984

1.985

1.986

1.987

1.988

1.989

1.99

1.991

1.992

1.993

1.994

1.995

1.996

1.997

1.998

1.999

2

2.001

2.002

2.003

2.004

2.005

2.006

2.007

2.008

2.009

2.01

2.011

2.012

2.013

2.014

2.015

2.016

2.017

2.018

2.019

2.02

2.021

2.022

2.023

2.024

2.025

2.026

2.027

2.028

2.029

2.03

2.031

2.032

2.033

2.034

2.035

2.036

2.037

2.038

2.039

2.04

2.041

2.042

2.043

2.044

2.045

2.046

2.047

2.048

2.049

2.05

2.051

2.052

2.053

2.054

2.055

2.056

2.057

2.058

2.059

2.06

2.061

2.062

2.063

2.064

2.065

2.066

2.067

2.068

2.069

2.07

2.071

2.072

2.073

2.074

2.075

2.076

2.077

2.078

2.079

2.08

2.081

2.082

2.083

2.084

2.085

2.086

2.087

2.088

2.089

2.09

2.091

2.092

2.093

2.094

2.095

2.096

2.097

2.098

2.099

2.1

2.101

2.102

2.103

2.104

2.105

2.106

2.107

2.108

2.109

2.11

2.111

2.112

2.113

2.114

2.115

2.116

2.117

2.118

2.119

2.12

2.121

2.122

2.123

2.124

2.125

2.126

2.127

2.128

2.129

2.13

2.131

2.132

2.133

2.134

2.135

2.136

2.137

2.138

2.139

2.14

2.141

2.142

2.143

2.144

2.145

2.146

2.147

2.148

2.149

2.15

2.151

2.152

2.153

2.154

2.155

2.156

2.157

2.158

2.159

2.16

2.161

2.162

2.163

2.164

2.165

2.166

2.167

2.168

2.169

2.17

2.171

2.172

2.173

2.174

2.175

2.176

2.177

2.178

2.179

2.18

2.181

2.182

2.183

2.184

2.185

2.186

2.187

2.188

2.189

2.19

2.191

2.192

2.193

2.194

2.195

2.196

2.197

2.198

2.199

2.2

2.201

2.202

2.203

2.204

2.205

2.206

2.207

2.208

2.209

2.21

2.211

2.212

2.213

2.214

2.215

2.216

2.217

2.218

2.219

2.22

2.221

2.222

2.223

2.224

2.225

2.226

2.227

2.228

2.229

2.23

2.231

2.232

2.233

2.234

2.235

2.236

2.237

2.238

2.239

2.24

2.241

2.242

2.243

2.244

2.245

2.246

2.247

2.248

2.249

2.25

2.251

2.252

2.253

2.254

2.255

2.256

2.257

2.258

2.259

2.26

2.261

2.262

2.263

2.264

2.265

2.266

2.267

2.268

2.269

2.27

2.271

2.272

2.273

2.274

2.275

2.276

2.277

2.278

2.279

2.28

2.281

2.282

2.283

2.284

2.285

2.286

2.287

2.288

2.289

2.29

2.291

2.292

2.293

2.294

2.295

2.296

2.297

2.298

2.299

2.3

2.301

2.302

2.303

2.304

2.305

2.306

2.307

2.308

2.309

2.31

2.311

2.312

2.313

2.314

2.315

2.316

2.317

2.318

2.319

2.32

2.321

2.322

2.323

2.324

2.325

2.326

2.327

2.328

2.329

2.33

2.332

2.333

2.334

2.335

2.336

2.337

2.338

2.339

2.34

2.341

2.342

2.343

2.344

2.345

2.346

2.347

2.348

2.349

2.35

2.351

2.352

2.353

2.354

2.355

2.356

2.357

2.358

2.359

2.36

2.361

2.362

2.363

2.364

2.365

2.366

2.367

2.368

2.369

2.37

2.371

2.372

2.373

2.374

2.375

2.376

2.377

2.378

2.379

2.38

2.381

2.382

2.383

2.384

2.385

2.386

2.387

2.388

2.389

2.39

2.391

2.392

2.393

2.394

2.395

2.396

2.397

2.398

2.399

2.4

2.401

2.402

2.403

2.404

2.405

2.406

2.407

2.408

2.409

2.41

2.411

2.412

2.413

2.414

2.415

2.416

2.417

2.418

2.419

2.42

2.421

2.422

2.423

2.424

2.425

2.426

2.427

2.428

2.429

2.43

2.431

2.432

2.433

2.434

2.435

2.436

2.437

2.438

2.439

2.44

2.441

2.442

2.443

2.444

2.445

2.446

2.447

2.448

2.449

2.45

2.451

2.452

2.453

2.454

2.455

2.456

2.457

2.458

2.459

2.46

2.461

2.462

2.463

2.464

2.465

2.466

2.467

2.468

2.469

2.47

2.471

2.472

2.473

2.474

2.475

2.476

2.477

2.478

2.479

2.48

2.481

2.482

2.483

2.484

2.485

2.486

2.487

2.488

2.489

2.49

2.491

2.492

2.493

2.494

2.495

2.496

2.497

2.498

2.499

2.5

2.501

2.502

2.503

2.504

2.505

2.506

2.507

2.508

2.509

2.51

2.511

2.513

2.514

2.515

2.516

2.517

2.518

2.519

2.52

2.521

2.522

2.523

2.524

2.525

2.526

2.527

2.528

2.529

2.53

2.531

2.532

2.533

2.534

2.535

2.536

2.537

2.538

2.539

2.54

2.541

2.542

2.543

2.544

2.545

2.546

2.547

2.548

2.549

2.55

2.551

2.552

2.553

2.554

2.555

2.556

2.557

2.558

2.559

2.56

2.561

2.562

2.563

2.564

2.565

2.566

2.567

2.568

2.569

2.57

2.571

2.572

2.573

2.574

2.575

2.576

2.577

2.578

2.579

2.58

2.581

2.582

2.583

2.584

2.585

2.586

2.587

2.588

2.589

2.59

2.591

2.592

2.593

2.594

2.595

2.596

2.597

2.598

2.599

2.6

2.601

2.602

2.603

2.604

2.605

2.606

2.607

2.608

2.609

2.61

2.611

2.612

2.613

2.614

2.615

2.616

2.617

2.618

2.619

2.62

2.621

2.622

2.623

2.624

2.625

2.626

2.627

2.628

2.629

2.63

2.631

2.632

2.633

2.634

2.635

2.636

2.637

2.638

2.639

2.64

2.641

2.642

2.643

2.644

2.645

2.646

2.647

2.648

2.649

2.65

2.651

2.652

2.653

2.654

2.655

2.656

2.657

2.658

2.659

2.66

2.661

2.662

2.663

2.664

2.665

2.666

2.667

2.668

2.669

2.67

2.671

2.672

2.673

2.674

2.675

2.676

2.677

2.678

2.679

2.68

2.681

2.682

2.683

2.684

2.685

2.686

2.687

2.688

2.689

2.69

2.691

2.692

2.693

2.694

2.695

2.696

2.697

2.698

2.699

2.7

2.701

2.702

2.703

2.704

2.705

2.706

2.707

2.708

2.709

2.71

2.711

2.712

2.713

2.714

2.715

2.716

2.717

2.718

2.719

2.72

2.721

2.722

2.723

2.724

2.725

2.726

2.727

2.728

2.729

2.73

2.731

2.732

2.733

2.734

2.735

2.736

2.737

2.738

2.739

2.74

2.741

2.742

2.743

2.744

2.745

2.746

2.747

2.748

2.749

2.75

2.751

2.752

2.753

2.754

2.755

2.756

2.757

2.758

2.759

2.76

2.761

2.762

2.763

2.764

2.765

2.766

2.767

2.768

2.769

2.77

2.771

2.772

2.773

2.774

2.775

2.776

2.777

2.778

2.779

2.78

2.781

2.782

2.783

2.784

2.785

2.786

2.787

2.788

2.789

2.79

2.791

2.792

2.793

2.794

2.795

2.796

2.797

2.798

2.799

2.8

2.802

2.803

2.804

2.805

2.806

2.807

2.808

2.809

2.81

2.811

2.812

2.813

2.814

2.815

2.816

2.817

2.818

2.819

2.82

2.821

2.822

2.823

2.824

2.825

2.826

2.827

2.828

2.829

2.83

2.831

2.832

2.833

2.834

2.835

2.836

2.837

2.838

2.839

2.84

2.841

2.842

2.843

2.844

2.845

2.846

2.847

2.848

2.849

2.85

2.851

2.852

2.853

2.854

2.855

2.856

2.857

2.858

2.859

2.86

2.861

2.862

2.863

2.864

2.865

2.866

2.867

2.868

2.869

2.87

2.871

2.872

2.873

2.874

2.875

2.876

2.877

2.878

2.879

2.88

2.881

2.882

2.883

2.884

2.885

2.886

2.887

2.888

2.889

2.89

2.891

2.892

2.893

2.894

2.895

2.896

2.897

2.898

2.899

2.9

2.901

2.902

2.903

2.904

2.905

2.906

2.907

2.908

2.909

2.91

2.911

2.912

2.913

2.914

2.915

2.916

2.917

2.918

2.919

2.92

2.921

2.922

2.923

2.924

2.925

2.926

2.927

2.928

2.929

2.93

2.931

2.932

2.933

2.934

2.935

2.936

2.937

2.938

2.939

2.94

2.941

2.942

2.943

2.944

2.945

2.946

2.947

2.948

2.949

2.95

2.951

2.952

2.953

2.954

2.955

2.956

2.957

2.958

2.959

2.96

2.961

2.962

2.963

2.964

2.965

2.966

2.967

2.968

2.969

2.97

2.971

2.973

2.974

2.975

2.976

2.977

2.978

2.979

2.98

2.981

2.982

2.983

2.984

2.985

2.986

2.987

2.989

2.99

2.991

2.992

2.993

2.994

2.995

2.996

2.997

2.998

3

3.001

3.002

3.003

3.004

3.005

3.006

3.007

3.008

3.009

3.01

3.011

3.012

3.013

3.014

3.015

3.016

3.017

3.018

3.019

3.02

3.021

3.022

3.023

3.024

3.025

3.026

3.027

3.028

3.029

3.03

3.031

3.032

3.033

3.034

3.035

3.036

3.037

3.038

3.039

3.04

3.042

3.043

3.044

3.045

3.046

3.047

3.048

3.049

3.05

3.051

3.052

3.053

3.054

3.055

3.056

3.057

3.058

3.059

3.06

3.061

3.062

3.063

3.064

3.065

3.066

3.067

3.068

3.069

3.07

3.071

3.072

3.073

3.074

3.075

3.076

3.077

3.078

3.079

3.08

3.081

3.082

3.083

3.084

3.085

3.086

3.088

3.089

3.09

3.091

3.092

3.093

3.094

3.095

3.096

3.097

3.098

3.099

3.1

3.101

3.102

3.103

3.104

3.105

3.106

3.107

3.108

3.109

3.11

3.111

3.112

3.113

3.114

3.115

3.116

3.117

3.118

3.119

3.12

3.121

3.122

3.123

3.124

3.125

3.126

3.127

3.128

3.129

3.13

3.131

3.132

3.133

3.134

3.135

3.136

3.137

3.138

3.139

3.14

3.141

3.142

3.143

3.144

3.145

3.146

3.147

3.148

3.149

3.15

3.151

3.152

3.153

3.154

3.155

3.156

3.157

3.158

3.159

3.16

3.161

3.162

3.163

3.164

3.165

3.166

3.167

3.168

3.169

3.17

3.171

3.172

3.173

3.174

3.175

3.176

3.177

3.178

3.179

3.18

3.181

3.182

3.183

3.184

3.185

3.186

3.187

3.188

3.19

3.191

3.192

3.193

3.194

3.195

3.196

3.197

3.198

3.199

3.2

3.201

3.202

3.203

3.204

3.205

3.206

3.207

3.208

3.209

3.21

3.211

3.212

3.213

3.214

3.215

3.216

3.217

3.218

3.219

3.22

3.222

3.223

3.224

3.225

3.226

3.227

3.228

3.229

3.23

3.231

3.232

3.234

3.235

3.236

3.237

3.238

3.239

3.24

3.241

3.242

3.243

3.244

3.245

3.246

3.247

3.248

3.249

3.25

3.251

3.252

3.253

3.254

3.255

3.257

3.258

3.259

3.26

3.261

3.262

3.263

3.264

3.265

3.266

3.267

3.268

3.269

3.27

3.271

3.272

3.273

3.274

3.275

3.276

3.277

3.278

3.279

3.28

3.281

3.282

3.283

3.284

3.285

3.286

3.287

3.288

3.289

3.29

3.291

3.292

3.293

3.295

3.296

3.297

3.298

3.299

3.3

3.301

3.302

3.303

3.304

3.305

3.306

3.307

3.308

3.309

3.31

3.311

3.312

3.313

3.314

3.315

3.316

3.317

3.318

3.319

3.32

3.321

3.322

3.323

3.324

3.325

3.326

3.327

3.328

3.329

3.33

3.331

3.332

3.333

3.334

3.335

3.336

3.337

3.338

3.339

3.34

3.341

3.342

3.343

3.344

3.345

3.346

3.347

3.348

3.349

3.35

3.351

3.352

3.353

3.354

3.355

3.356

3.357

3.358

3.359

3.36

3.361

3.362

3.363

3.364

3.365

3.366

3.367

3.368

3.369

3.37

3.371

3.372

3.373

3.374

3.375

3.376

3.377

3.378

3.379

3.38

3.381

3.382

3.383

3.384

3.385

3.386

3.387

3.388

3.389

3.39

3.391

3.392

3.393

3.394

3.395

3.396

3.397

3.398

3.399

3.4

3.401

3.402

3.403

3.404

3.405

3.406

3.407

3.408

3.409

3.41

3.411

3.412

3.413

3.414

3.415

3.416

3.417

3.418

3.419

3.42

3.421

3.422

3.423

3.424

3.425

3.426

3.427

3.429

3.43

3.431

3.432

3.433

3.434

3.435

3.436

3.437

3.438

3.439

3.44

3.441

3.442

3.443

3.444

3.445

3.446

3.447

3.448

3.449

3.45

3.451

3.452

3.453

3.454

3.455

3.456

3.457

3.458

3.459

3.46

3.461

3.462

3.463

3.464

3.465

3.466

3.467

3.468

3.469

3.47

3.471

3.472

3.473

3.474

3.475

3.476

3.477

3.478

3.479

3.48

3.481

3.482

3.483

3.484

3.485

3.487

3.488

3.489

3.49

3.491

3.492

3.493

3.494

3.495

3.496

3.497

3.498

3.5

3.501

3.502

3.503

3.504

3.505

3.506

3.507

3.508

3.509

3.51

3.511

3.512

3.513

3.514

3.515

3.516

3.517

3.518

3.519

3.52

3.521

3.522

3.523

3.524

3.525

3.526

3.527

3.528

3.529

3.53

3.531

3.532

3.533

3.534

3.535

3.536

3.537

3.538

3.539

3.54

3.541

3.542

3.543

3.544

3.545

3.546

3.547

3.548

3.549

3.55

3.551

3.552

3.553

3.554

3.555

3.556

3.558

3.559

3.56

3.561

3.562

3.563

3.564

3.565

3.566

3.567

3.568

3.569

3.57

3.571

3.572

3.573

3.574

3.575

3.576

3.577

3.578

3.579

3.58

3.581

3.582

3.583

3.584

3.585

3.586

3.587

3.588

3.589

3.59

3.591

3.592

3.593

3.594

3.595

3.596

3.597

3.598

3.599

3.6

3.601

3.602

3.603

3.604

3.605

3.606

3.607

3.608

3.609

3.61

3.611

3.612

3.613

3.614

3.615

3.616

3.617

3.618

3.619

3.62

3.621

3.622

3.623

3.624

3.625

3.626

3.627

3.628

3.629

3.63

3.631

3.632

3.633

3.634

3.635

3.636

3.637

3.638

3.639

3.64

3.641

3.642

3.643

3.644

3.645

3.646

3.647

3.648

3.649

3.65

3.651

3.652

3.653

3.654

3.655

3.656

3.657

3.658

3.659

3.66

3.661

3.662

3.663

3.664

3.665

3.666

3.667

3.668

3.669

3.67

3.671

3.672

3.673

3.674

3.675

3.678

3.679

3.68

3.681

3.682

3.683

3.685

3.686

3.687

3.688

3.689

3.69

3.691

3.692

3.693

3.694

3.695

3.696

3.697

3.698

3.699

3.7

3.701

3.702

3.703

3.704

3.705

3.706

3.707

3.708

3.709

3.71

3.711

3.712

3.713

3.714

3.715

3.716

3.717

3.718

3.719

3.72

3.721

3.722

3.723

3.724

3.725

3.726

3.727

3.728

3.729

3.73

3.731

3.732

3.733

3.734

3.735

3.736

3.737

3.738

3.739

3.74

3.741

3.742

3.743

3.744

3.745

3.746

3.747

3.748

3.749

3.75

3.751

3.752

3.753

3.754

3.755

3.756

3.757

3.758

3.759

3.76

3.761

3.762

3.763

3.764

3.765

3.766

3.767

3.768

3.769

3.77

3.771

3.772

3.773

3.774

3.775

3.776

3.777

3.778

3.779

3.78

3.781

3.782

3.783

3.784

3.785

3.786

3.787

3.788

3.789

3.79

3.791

3.792

3.793

3.794

3.795

3.796

3.798

3.799

3.8

3.801

3.802

3.803

3.804

3.805

3.806

3.807

3.808

3.809

3.81

3.811

3.812

3.813

3.814

3.815

3.816

3.817

3.818

3.819

3.82

3.821

3.822

3.823

3.824

3.825

3.826

3.827

3.828

3.829

3.83

3.831

3.832

3.833

3.834

3.835

3.836

3.837

3.838

3.839

3.84

3.841

3.842

3.843

3.844

3.845

3.846

3.847

3.848

3.849

3.85

3.851

3.852

3.853

3.854

3.855

3.856

3.857

3.858

3.859

3.86

3.861

3.862

3.863

3.864

3.865

3.866

3.867

3.868

3.869

3.87

3.871

3.872

3.873

3.874

3.875

3.876

3.877

3.878

3.879

3.88

3.881

3.882

3.883

3.884

3.885

3.886

3.887

3.888

3.889

3.89

3.891

3.892

3.893

3.894

3.895

3.896

3.897

3.898

3.899

3.9

3.901

3.902

3.903

3.905

3.906

3.907

3.908

3.909

3.91

3.911

3.912

3.913

3.914

3.915

3.916

3.917

3.918

3.919

3.92

3.921

3.922

3.923

3.924

3.925

3.926

3.927

3.928

3.929

3.93

3.931

3.932

3.933

3.934

3.935

3.936

3.937

3.938

3.94

3.942

3.943

3.944

3.945

3.946

3.947

3.948

3.949

3.95

3.951

3.952

3.954

3.955

3.956

3.957

3.958

3.96

3.961

3.962

3.963

3.964

3.965

3.966

3.967

3.968

3.969

3.97

3.971

3.972

3.973

3.974

3.975

3.976

3.977

3.978

3.979

3.98

3.981

3.982

3.983

3.984

3.985

3.986

3.987

3.988

3.989

3.99

3.991

3.992

3.993

3.994

3.995

3.996

3.997

3.998

3.999

4

4.001

4.002

4.003

4.004

4.005

4.006

4.007

4.008

4.009

4.01

4.011

4.012

4.013

4.015

4.018

4.019

4.02

4.021

4.025

4.03

4.035

4.04

4.045

4.05

4.055

4.06

4.065

4.07

4.075

4.08

4.085

4.09

4.095

4.1

4.105

4.11

4.115

4.12

4.125

4.13

4.135

4.14

4.145

4.15

4.155

4.16

4.165

4.17

4.175

4.18

4.185

4.19

4.195

4.2

4.205

4.21

4.215

4.22

4.225

4.23

4.235

4.24

4.245

4.25

4.255

4.26

4.265

4.27

4.275

4.28

4.285

4.29

4.295

4.3

4.305

4.31

4.315

4.32

4.325

4.33

4.335

4.34

4.345

4.35

4.355

4.36

4.365

4.37

4.375

4.38

4.385

4.39

4.395

4.4

4.405

4.41

4.415

4.42

4.425

4.43

4.435

4.44

4.445

4.45

4.455

4.46

4.465

4.47

4.475

4.48

4.485

4.49

4.495

4.5

4.505

4.51

4.515

4.52

4.525

4.53

4.535

4.54

4.545

4.55

4.555

4.56

4.565

4.57

4.575

4.58

4.585

4.59

4.595

4.6

4.605

4.61

4.615

4.62

4.625

4.63

4.635

4.64

4.645

4.65

4.655

4.66

4.665

4.67

4.675

4.68

4.685

4.69

4.695

4.7

4.705

4.71

4.715

4.72

4.725

4.73

4.735

4.74

4.745

4.75

4.755

4.76

4.765

4.77

4.775

4.78

4.785

4.79

4.795

4.8

4.805

4.81

4.815

4.82

4.825

4.83

4.835

4.84

4.845

4.85

4.855

4.86

4.865

4.87

4.875

4.88

4.885

4.89

4.895

4.9

4.905

4.91

4.915

4.92

4.925

4.93

4.935

4.94

4.945

4.95

4.955

4.96

4.965

4.97

4.975

4.98

4.985

4.987

4.988

4.989

4.99

4.995

5

5.001

5.002

5.003

5.005

5.006

5.007

5.008

5.009

5.01

5.015

5.016

5.017

5.02

5.023

5.025

5.028

5.03

5.035

5.04

5.045

5.05

5.055

5.06

5.065

5.07

5.075

5.08

5.085

5.09

5.095

5.1

5.105

5.11

5.115

5.12

5.125

5.13

5.135

5.14

5.145

5.15

5.155

5.16

5.165

5.17

5.175

5.18

5.185

5.19

5.195

5.2

5.205

5.21

5.215

5.22

5.225

5.23

5.235

5.24

5.245

5.25

5.255

5.26

5.265

5.27

5.275

5.28

5.285

5.29

5.295

5.3

5.305

5.31

5.315

5.32

5.325

5.33

5.335

5.34

5.345

5.35

5.355

5.36

5.365

5.37

5.375

5.38

5.385

5.39

5.395

5.4

5.405

5.41

5.415

5.42

5.425

5.43

5.435

5.44

5.445

5.45

5.455

5.46

5.465

5.47

5.475

5.48

5.485

5.49

5.495

5.5

5.505

5.51

5.515

5.52

5.525

5.53

5.535

5.54

5.545

5.55

5.555

5.56

5.565

5.57

5.575

5.58

5.585

5.59

5.595

5.6

5.605

5.61

5.615

5.62

5.625

5.63

5.635

5.64

5.645

5.65

5.655

5.66

5.665

5.67

5.675

5.68

5.685

5.69

5.695

5.7

5.705

5.71

5.715

5.72

5.725

5.73

5.735

5.74

5.745

5.75

5.755

5.76

5.765

5.77

5.775

5.78

5.785

5.79

5.795

5.8

5.805

5.81

5.815

5.82

5.825

5.83

5.835

5.84

5.845

5.85

5.855

5.86

5.865

5.87

5.875

5.88

5.885

5.89

5.895

5.9

5.905

5.91

5.915

5.92

5.925

5.93

5.935

5.94

5.945

5.95

5.955

5.96

5.965

5.97

5.975

5.98

5.985

5.99

5.992

5.995

5.998

6

6.00 (for H7)

6.002

6.003

6.005

6.006

6.007

6.008

6.009

6.01

6.011

6.012

6.014

6.015

6.02

6.025

6.03

6.035

6.04

6.045

6.05

6.055

6.06

6.065

6.07

6.075

6.08

6.085

6.09

6.095

6.1

6.105

6.11

6.12

6.13

6.14

6.15

6.16

6.17

6.18

6.19

6.2

6.205

6.21

6.22

6.23

6.24

6.25

6.26

6.27

6.28

6.29

6.3

6.305

6.31

6.32

6.33

6.34

6.35

6.35～7.15

6.36

6.37

6.38

6.39

6.4

6.405

6.41

6.42

6.43

6.44

6.45

6.46

6.47

6.48

6.49

6.5

6.505

6.51

6.52

6.53

6.54

6.55

6.56

6.57

6.58

6.59

6.6

6.605

6.61

6.62

6.63

6.64

6.65

6.66

6.67

6.68

6.69

6.7

6.705

6.71

6.72

6.73

6.74

6.75

6.76

6.77

6.78

6.79

6.8

6.805

6.81

6.82

6.83

6.84

6.85

6.86

6.87

6.88

6.89

6.9

6.905

6.91

6.92

6.93

6.94

6.95

6.955

6.96

6.965

6.97

6.975

6.98

6.985

6.99

6.995

7

7.00 (for H7)

7.005

7.008

7.01

7.012

7.015

7.02

7.025

7.03

7.035

7.04

7.045

7.05

7.06

7.07

7.08

7.09

7.1

7.105

7.11

7.12

7.13

7.14

7.15

7.15～7.95

7.16

7.17

7.18

7.19

7.2

7.205

7.21

7.22

7.23

7.24

7.25

7.26

7.27

7.28

7.29

7.3

7.305

7.31

7.32

7.33

7.34

7.35

7.36

7.37

7.38

7.39

7.4

7.405

7.41

7.42

7.43

7.44

7.45

7.46

7.47

7.48

7.49

7.5

7.505

7.51

7.52

7.53

7.54

7.55

7.56

7.57

7.58

7.59

7.6

7.605

7.61

7.62

7.63

7.64

7.65

7.66

7.67

7.68

7.69

7.7

7.705

7.71

7.72

7.73

7.74

7.75

7.76

7.77

7.78

7.79

7.8

7.805

7.81

7.82

7.83

7.84

7.85

7.86

7.87

7.88

7.89

7.9

7.905

7.91

7.92

7.93

7.94

7.95

7.95～8.70

7.955

7.96

7.965

7.97

7.975

7.98

7.985

7.99

7.995

7.998

8

8.00 (for H7)

8.001

8.002

8.003

8.005

8.007

8.01

8.011

8.012

8.015

8.016

8.017

8.018

8.02

8.025

8.03

8.035

8.04

8.045

8.05

8.06

8.07

8.08

8.09

8.095

8.1

8.105

8.11

8.12

8.13

8.14

8.15

8.16

8.17

8.18

8.19

8.2

8.205

8.21

8.22

8.23

8.24

8.25

8.26

8.27

8.28

8.29

8.3

8.305

8.31

8.32

8.33

8.34

8.35

8.36

8.37

8.38

8.39

8.4

8.405

8.41

8.42

8.43

8.44

8.45

8.46

8.47

8.48

8.49

8.5

8.505

8.51

8.52

8.53

8.54

8.55

8.56

8.57

8.58

8.59

8.6

8.605

8.61

8.62

8.63

8.64

8.65

8.66

8.67

8.68

8.69

8.7

8.70～9.50

8.705

8.71

8.72

8.73

8.74

8.75

8.76

8.77

8.78

8.79

8.8

8.805

8.81

8.82

8.83

8.84

8.85

8.86

8.87

8.88

8.89

8.9

8.905

8.91

8.92

8.93

8.94

8.95

8.955

8.96

8.965

8.97

8.975

8.98

8.985

8.99

8.995

9

9.00 (for H7)

9.005

9.01

9.015

9.02

9.025

9.03

9.035

9.04

9.045

9.05

9.06

9.07

9.08

9.09

9.1

9.11

9.12

9.13

9.14

9.15

9.16

9.17

9.18

9.19

9.2

9.21

9.22

9.23

9.24

9.25

9.26

9.27

9.28

9.29

9.3

9.31

9.32

9.33

9.34

9.35

9.36

9.37

9.38

9.39

9.4

9.41

9.42

9.43

9.44

9.45

9.46

9.47

9.48

9.49

9.5

9.50～10.25

9.51

9.52

9.53

9.54

9.55

9.56

9.57

9.58

9.59

9.6

9.61

9.62

9.63

9.64

9.65

9.66

9.67

9.68

9.69

9.7

9.71

9.72

9.73

9.74

9.75

9.76

9.77

9.78

9.79

9.8

9.81

9.82

9.83

9.84

9.85

9.86

9.87

9.88

9.89

9.9

9.91

9.92

9.93

9.94

9.95

9.955

9.96

9.965

9.97

9.975

9.98

9.985

9.99

9.995

10

10.00 (For H7)

10.004

10.005

10.006

10.008

10.009

10.01

10.015

10.02

10.025

10.03

10.035

10.04

10.045

10.05

10.06

10.07

10.08

10.09

10.1

10.11

10.12

10.13

10.14

10.15

10.16

10.17

10.18

10.19

10.2

10.21

10.22

10.23

10.24

10.25

10.26

10.27

10.28

10.29

10.3

10.31

10.32

10.33

10.34

10.35

10.36

10.37

10.38

10.39

10.4

10.41

10.42

10.43

10.44

10.45

10.46

10.47

10.48

10.49

10.5

10.51

10.52

10.53

10.54

10.55

10.56

10.57

10.58

10.59

10.6

10.61

10.62

10.63

10.64

10.65

10.66

10.67

10.68

10.69

10.7

10.71

10.72

10.73

10.74

10.75

10.76

10.77

10.78

10.79

10.8

10.81

10.82

10.83

10.84

10.85

10.86

10.87

10.88

10.89

10.9

10.91

10.92

10.93

10.94

10.95

10.955

10.96

10.965

10.97

10.975

10.98

10.985

10.99

10.995

11

11.00 (For H7)

11.005

11.01

11.015

11.02

11.025

11.03

11.035

11.04

11.045

11.05

11.06

11.07

11.08

11.09

11.1

11.11

11.12

11.13

11.14

11.15

11.16

11.17

11.18

11.19

11.2

11.21

11.22

11.23

11.24

11.25

11.26

11.27

11.28

11.29

11.3

11.31

11.32

11.33

11.34

11.35

11.36

11.37

11.38

11.39

11.4

11.41

11.42

11.43

11.44

11.45

11.46

11.47

11.48

11.49

11.5

11.51

11.52

11.53

11.54

11.55

11.56

11.57

11.58

11.59

11.6

11.61

11.62

11.63

11.64

11.65

11.66

11.67

11.68

11.69

11.7

11.71

11.72

11.73

11.74

11.75

11.76

11.77

11.78

11.79

11.8

11.81

11.82

11.83

11.84

11.85

11.86

11.87

11.88

11.89

11.9

11.905

11.91

11.92

11.93

11.94

11.95

11.955

11.96

11.965

11.97

11.975

11.98

11.985

11.99

11.995

12

12.00 (For H7)

12.00～13.50

12.005

12.01

12.015

12.02

12.025

12.03

12.035

12.04

12.045

12.05

12.06

12.07

12.08

12.09

12.1

12.11

12.12

12.13

12.14

12.15

12.16

12.17

12.18

12.19

12.2

12.21

12.22

12.23

12.24

12.25

12.26

12.27

12.28

12.29

12.3

12.31

12.32

12.33

12.34

12.35

12.36

12.37

12.38

12.39

12.4

12.41

12.42

12.43

12.44

12.45

12.46

12.47

12.48

12.49

12.5

12.51

12.52

12.53

12.54

12.55

12.56

12.57

12.58

12.59

12.6

12.61

12.62

12.63

12.64

12.65

12.66

12.67

12.68

12.69

12.7

12.71

12.72

12.73

12.74

12.75

12.76

12.77

12.78

12.79

12.8

12.81

12.82

12.83

12.84

12.85

12.86

12.87

12.88

12.89

12.9

12.91

12.92

12.93

12.94

12.95

12.96

12.97

12.98

12.99

13

13.00 (for H7)

13.01

13.02

13.03

13.04

13.05

13.1

13.2

13.3

13.4

13.5

13.50～15.00

13.6

13.7

13.8

13.9

13.95

13.96

13.97

13.98

13.99

14

14.01

14.02

14.03

14.04

14.05

14.1

14.2

14.3

14.4

14.5

14.6

14.7

14.8

14.9

14.95

14.96

14.97

14.98

14.99

15

15.00～16.75

15.01

15.02

15.03

15.04

15.05

15.1

15.2

15.3

15.4

15.5

15.6

15.7

15.8

15.9

15.95

15.96

15.97

15.98

15.99

16

16.01

16.02

16.03

16.04

16.05

16.1

16.2

16.3

16.4

16.5

16.6

16.7

16.8

16.9

16.95

16.96

16.97

16.98

16.99

17

17.01

17.02

17.03

17.04

17.05

17.1

17.3

17.4

17.5

17.6

17.7

17.8

17.9

17.95

17.96

17.97

17.98

17.99

18

18.01

18.02

18.03

18.04

18.05

18.1

18.2

18.3

18.4

18.5

18.6

18.7

18.8

18.9

18.95

18.96

18.97

18.98

18.99

19

19.01

19.02

19.03

19.04

19.05

19.1

19.2

19.3

19.4

19.5

19.6

19.7

19.75～21.50

19.8

19.9

19.95

19.96

19.97

19.98

19.99

20

20.01

20.02

20.03

20.04

20.05

20.5

21

21.5

21.50～23.75

22

22.5

23

23.5

24

24.5

25

25.5

26

26.5

27

27.5

28

28.5

29

29.5

30

30.25～34.25

32

34

36

38

40
[1.8-5/0.1mm Unit(s)][0.3-15.99/0.01mm Unit(s)][0.3-15.995/0.005mm Unit(s)]
Clear

Shank Type
- End Mill Shank
- Straight Shank
- Morse Taper Shank
Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Resin
- Die Steel
- Heat-resistant alloy
- Alloy Steel
Details

Clear

Groove Length(mm)
- 3
- 4
- 5
- 6
- 8
- 10
- 12
- 15
- 16
- 17
- 18
- 19
- 20
- 22
- 25
- 26
- 27
- 28
- 30
- 31
- 32
- 35
- 36
- 37
- 38
- 40
- 41
- 42
- 45
- 46
- 48
- 50
- 52
- 53
- 55
- 60
- 63
- 65
- 67
- 70
- 75
- 76
- 80
- 87
- 98
- 99
- 100
- 119
- 120
- 141
- 150
- 163
- 194
[0.5-48/0.5mm Unit(s)][3-10/1mm Unit(s)]

Drawing

Clear