Rejestracja

Tłumaczymy nasz sklep na język polski!

Wymaga to jednak czasu, ponieważ w ofercie mamy dużo artykułów, a na nasz sklep składa się wiele stron. Chwilowo nasz katalog produktów dostępny będzie w języku angielskim. Dziękujemy za cierpliwość!
Warunki filtrowania

Wyczyść wszystko

  • Stan magazynowy
  • Tool Diameter(mm)
    [1.8–5/0.1mm jedn.]
    [0.3–15.99/0.01mm jedn.]
    [0.3–15.995/0.005mm jedn.]
  • Shank Type
  • work material
  • Groove Length(mm)
    [0.5–48/0.5mm jedn.]
    [3–10/1mm jedn.]
  • Groove Shape
  • Tip diameter
  • Large End Diameter
  • radius R
  • Reamers (Coating Y/N: N/A)

    Reamers are a cutting tool used on drilled holes to refine them into the required hole-diameter precision and surface roughness while shaping them into true circles. Reamers are selected according to the precision of the hole as needed. They vary in hardness and size from the ones used to cut holes in parts of aircrafts to those used to manufacture musical instruments. Different reamers are selected based on their applications; hand reamers used for manual operation with handles attached to them, chucking reamers mounted to drill presses or NC machine tools for machining, machine reamers with longer cutter section than that of chucking reamers, taper reamers for finishing tapered drilled holes, bridge reamers used for correcting bolt holes, etc., when there is misalignment in them, and more. Their materials include high-speed steel or coated high-speed steel, carbide or coated carbide; reamer types vary according to the material of the parts for machining, machining method (manual or machine tool) and the cutting fluid types.
    • Carbide Straight Reamer
      • Volume Discount

      OSG

      Carbide Straight Reamer

      The cutting material used is carbide.-Provide sufficient cutting fluid.-Use a chuck with high precision.-It may be necessary to change the conditions depending on the workpiece and the rigidity of the machine.
      Czytaj dalej
      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      0.3 ~ 13.05End Mill Shank / Straight ShankGeneral Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]-N/AStraightN/A--
      Cena (bez VAT) od:
      35.50 €
      Standardowa data wysyłki:
      6 dni robocze
      Konfiguruj
    • High-Speed Steel Hand Reamer, Straight Right Blade, 0.01 mm Unit Designation Model
      • Volume Discount

      MISUMI

      High-Speed Steel Hand Reamer, Straight Right Blade, 0.01 mm Unit Designation Model

      [Features] -Standard hand reamer with straight blade-Cutting diameter can be selected in units of 0.01 mm.
      Czytaj dalej
      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
      0.5 ~ 30Straight ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]12 ~ 150N/AStraightN/A--
      Cena (bez VAT) od:
      24.27 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • High-Speed Steel Spiral Hand Reamer, Right Blade with 12°Left Spiral, 0.01 mm Unit Designation

        MISUMI

        High-Speed Steel Spiral Hand Reamer, Right Blade with 12°Left Spiral, 0.01 mm Unit Designation

        [Features] -Standard spiral reamer right cutting edge left spiral angle 12°-Cutting diameter can be selected in units of 0.01 mm-Helical cutting edge reduces cutting force.
        Czytaj dalej
        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        2 ~ 30Straight ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]30 ~ 150N/ASpiralN/A--
        Cena (bez VAT) od:
        38.82 €
        Standardowa data wysyłki:
        7 dni robocze
        Konfiguruj
      • Solid Long Hand Reamer CSLHR
        • Volume Discount

        EIKOSHA

        Solid Long Hand Reamer CSLHR

        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        0.4 ~ 10.05Straight ShankGeneral Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]20 ~ 150N/AStraightN/A--
        Cena (bez VAT) od:
        80.61 €
        Standardowa data wysyłki:
        6 dni robocze
        Konfiguruj
      • Spool Reamer SUR
        • ZNIŻKA
        • Volume Discount

        EIKOSHA

        Spool Reamer SUR

        For Spool Mold Drilling
        Czytaj dalej
        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        -End Mill ShankGeneral Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]60 ~ 160N/ASpiralN/A2 ~ 10 3.04 ~ 37.99
        Cena (bez VAT) od:
        97.66 €
        Cena specjalna
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Niektóre pozycje mogą zostać wysłane tego samego dnia
        Konfiguruj
      • Morse Taper Reamer (For Hand Use) For Finishing MTR-F

          EIKOSHA

          Morse Taper Reamer (For Hand Use) For Finishing MTR-F

          For Morse Taper Hole (Finish)
          Czytaj dalej
          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
          -Straight ShankGeneral Steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]65 ~ 205N/AStraightN/A6.547 ~ 54.3889.93 ~ 65.076
          Cena (bez VAT) od:
          107.83 €
          Standardowa data wysyłki:
          6 dni robocze
          Konfiguruj
        • Solid Reamer CSR
          • Volume Discount

          EIKOSHA

          Solid Reamer CSR

          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
          0.4 ~ 20.05Straight ShankGeneral Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]4 ~ 80N/AStraightN/A--
          Cena (bez VAT) od:
          31.73 €
          Standardowa data wysyłki:
          6 dni robocze
          Konfiguruj
        • Taper Pin Reamer TPR
          • ZNIŻKA
          • Volume Discount

          EIKOSHA

          Taper Pin Reamer TPR

          For 1/48 and 1/50 Taper Pins
          Czytaj dalej
          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
          -Straight ShankGeneral Steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]99 ~ 194N/AStraightN/A6 ~ 127.88 ~ 15.74
          Cena (bez VAT) od:
          45.12 €
          Cena specjalna
          Standardowa data wysyłki:
          Towar dostępny w magazynie: 1 dzień roboczy
          Niektóre pozycje mogą zostać wysłane tego samego dnia
          Konfiguruj
        • Spiral Taper Pin Reamer
          • Volume Discount

          EIKOSHA

          Spiral Taper Pin Reamer

          Screw Type for 1/48 and 1/50 Taper Pins Reduces Cutting Resistance
          Czytaj dalej
          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
          -Straight ShankGeneral Steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]48 ~ 318N/ASpiralN/A1.9 ~ 29.72.86 ~ 36.06
          Cena (bez VAT) od:
          41.18 €
          Standardowa data wysyłki:
          6 dni robocze
          Konfiguruj
        • Carbide Spiral Reamer, High-Precision Tolerance Model
          • Volume Discount

          MISUMI

          Carbide Spiral Reamer, High-Precision Tolerance Model

          [Features] -Achieves high-precision hole machining by reducing the tolerance width of the cutting diameter-High-speed cutting greatly improves efficiency compared to high-speed steel reamers-The long service life makes it possible to maintain high-precision machining for a long time.-Even higher cutting speed is possible by using spiral grooves.
          Czytaj dalej
          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
          1 ~ 13End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]10 ~ 44N/ASpiralN/A--
          Cena (bez VAT) od:
          40.30 €
          Standardowa data wysyłki:
          5 dni robocze
          Konfiguruj
        • High-Speed Steel Spiral Machine Reamer, Right Blade with 12°Left Spiral, 0.01 mm Unit Designation

            MISUMI

            High-Speed Steel Spiral Machine Reamer, Right Blade with 12°Left Spiral, 0.01 mm Unit Designation

            [Features] -Standard spiral reamer with right flute and left spiral angle 12°. Morse taper shank-Cutting diameter selectable in units of 0.01 mm-Helical blade reduces cutting force.
            Czytaj dalej
            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
            3 ~ 30.02Taper shankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]35 ~ 150N/ASpiralN/A--
            Cena (bez VAT) od:
            112.40 €
            Standardowa data wysyłki:
            7 dni robocze
            Konfiguruj
          • High-Speed Steel High Helical Reamer, Right Blade with 60° Left Spiral, Straight Shank, 0.1 mm Unit Designation Model

              MISUMI

              High-Speed Steel High Helical Reamer, Right Blade with 60° Left Spiral, Straight Shank, 0.1 mm Unit Designation Model

              [Features] Standard reamer with high helix angle, right blade, left helix angle, 60°. Cutting force is reduced by the high helix angleCutting diameter can be selected in units of 0.1 mm.
              Czytaj dalej
              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
              2 ~ 14Straight ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]13 ~ 45N/ASpiralN/A--
              Cena (bez VAT) od:
              44.48 €
              Standardowa data wysyłki:
              7 dni robocze
              Konfiguruj
            • Long Handle Reamer LHR
              • Volume Discount

              EIKOSHA

              Long Handle Reamer LHR

              For long type deep hole, Hold on slop to improve assistance 1
              Czytaj dalej
              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
              1/2 ~ 26Straight ShankGeneral Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]50 ~ 250N/AStraightN/A--
              Cena (bez VAT) od:
              94.64 €
              Standardowa data wysyłki:
              6 dni robocze
              Konfiguruj
            • Carbide µ (Mu) Reamer
              • ZNIŻKA
              • Volume Discount

              FPTOOLS

              Carbide µ (Mu) Reamer

              [Features]· Easy tool management: As well as being suitable for high-precision drilling as the nominal dimensions are manufactured with 1 μm increments, 11,800 sizes are available for selection.· Ultra-high precision: Tolerance of 0 to less than +1 μm is ideal for drilling ultra-precision holes.· High durability: Excellent durability, maintaining precision over long periods of time.· Application: General work materials.
              Czytaj dalej
              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
              0.5 ~ 10.009End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎]5 ~ 40N/AStraightN/A--
              Cena (bez VAT) od:
              65.44 €
              Cena specjalna
              Standardowa data wysyłki:
              Towar dostępny w magazynie: 1 dzień roboczy
              Niektóre pozycje mogą zostać wysłane tego samego dnia
              Konfiguruj
            • Carbide Reamer G Series
              • ZNIŻKA
              • Volume Discount

              FPTOOLS

              Carbide Reamer G Series

              [Features]· The most universally usable reamer among all series of carbide reamers.· Approximately 5 to 10 times greater durability than conventional HSS reamers, maintaining its precision for long periods of time.· Processing hole precision is also superior to the HSS reamer, allowing use at higher cutting speed and feeding speed.· Because the pitch is 0.005 mm, there are no breaks between sizes and negative tolerance hole drilling is also possible.
              Czytaj dalej
              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
              0.2 ~ 12.1End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎]3 ~ 45N/AStraightN/A--
              Cena (bez VAT) od:
              25.27 €
              Cena specjalna
              Standardowa data wysyłki:
              Towar dostępny w magazynie: 1 dzień roboczy
              Niektóre pozycje mogą zostać wysłane tego samego dnia
              Konfiguruj
            • Spiral Hand Reamer
              • ZNIŻKA
              • Volume Discount

              EIKOSHA

              Spiral Hand Reamer

              General-purpose spiral reamer (HSS) with torsion blade that can be hand turned.[Features]· The shank has an angle and can be hand turned.· The bite is long (angle set at 1°) and the cutting edge does not easily get damaged.· Adopts a torsion blade with excellent cutting powder discharge.[Applications]· For general purpose finishing.
              Czytaj dalej
              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
              1/4 ~ 20.2End Mill Shank / Straight ShankGeneral Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]30 ~ 120N/ASpiralN/A--
              Cena (bez VAT) od:
              31.97 €
              Cena specjalna
              Standardowa data wysyłki:
              Towar dostępny w magazynie: 1 dzień roboczy
              Niektóre pozycje mogą zostać wysłane tego samego dnia
              Konfiguruj
            • Machine Reamer MR (SKH51)

                TAIYO-TOOL

                Machine Reamer MR (SKH51)

                [Shank Type]· Morse taper shank[Coating Y/N]· None[Groove Shape]· Straight[Base Blade Y/N] N
                Czytaj dalej
                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                1-5/8 ~ 80Morse Taper Shank-35 ~ 220N/AStraightN/A--
                Cena (bez VAT) od:
                94.18 €
                Standardowa data wysyłki:
                6 dni robocze
                Konfiguruj
              • Straight Reamer with Carbide Bottom Blade
                • Volume Discount

                MISUMI

                Straight Reamer with Carbide Bottom Blade

                [Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole.
                Czytaj dalej
                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                3 ~ 10.01End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]27 ~ 40N/AStraightAvailable--
                Cena (bez VAT) od:
                52.82 €
                Standardowa data wysyłki:
                5 dni robocze
                Konfiguruj
              • Carbide Helical Reamer
                • Volume Discount

                MISUMI

                Carbide Helical Reamer

                [Features] -High-speed milling significantly improves efficiency compared to high-speed steel reamers-High-speed milling is possible by using spiral grooves.
                Czytaj dalej
                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                3 ~ 10End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]25 ~ 40N/ASpiralN/A--
                Cena (bez VAT) od:
                80.25 €
                Standardowa data wysyłki:
                5 dni robocze
                Konfiguruj
              • Carbide Pilot Hole Correction Boring Bit

                  MISUMI

                  Carbide Pilot Hole Correction Boring Bit

                  In case the hole pitch has an intersection or the inclination tolerance of the hole is demanding. By using it before finishing the reamer, the bend of the hole can be modified.
                  Czytaj dalej
                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                  1.8 ~ 5End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]-N/AStraightN/A--
                  Standardowa data wysyłki:
                  8 dni robocze
                  Konfiguruj
                • Cobalt High-Speed Steel Spiral Reamer
                  • Volume Discount

                  MISUMI

                  Cobalt High-Speed Steel Spiral Reamer

                  [Features] -Spiral reamer made of cobalt high-speed steel with high versatility-Design with 10° left bevel angle and 45° tip bevel angle-Helical blade reduces cutting force.
                  Czytaj dalej
                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                  1 ~ 13End Mill ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]15 ~ 44N/ASpiralN/A--
                  Cena (bez VAT) od:
                  24.09 €
                  Standardowa data wysyłki:
                  5 dni robocze
                  Konfiguruj
                • High-Speed Steel Machine Reamer, Straight Blade, Straight Right Blade, 0.01 mm Unit Designation Model

                    MISUMI

                    High-Speed Steel Machine Reamer, Straight Blade, Straight Right Blade, 0.01 mm Unit Designation Model

                    [Features] -Standard straight edge machine reamer. Morse taper shank-Cutting diameter selectable in units of 0.01 mm.
                    Czytaj dalej
                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                    2.95 ~ 30.02Taper shankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]35 ~ 150N/AStraightN/A--
                    Cena (bez VAT) od:
                    104.25 €
                    Standardowa data wysyłki:
                    7 dni robocze
                    Konfiguruj
                  • High-Speed Steel High Helical Reamer, Right Blade with 60° Left Spiral, Tapered Shank, 0.1 mm Unit Designation Model

                      MISUMI

                      High-Speed Steel High Helical Reamer, Right Blade with 60° Left Spiral, Tapered Shank, 0.1 mm Unit Designation Model

                      [Features] Standard reamer with high helix angle, right blade, left helix angle, 60°. Cutting force is reduced by the high helix angleCutting diameter can be selected in units of 0.01 mm.
                      Czytaj dalej
                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                      4 ~ 30Taper shankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]22 ~ 60N/ASpiralN/A--
                      Cena (bez VAT) od:
                      79.98 €
                      Standardowa data wysyłki:
                      5 dni robocze
                      Konfiguruj
                    • 1 / 10" Taper Spiral Taper Reamer for Finishing SPTR-F

                        EIKOSHA

                        1 / 10" Taper Spiral Taper Reamer for Finishing SPTR-F

                        Morse Taper Shank for 1/10 Taper Holes (for Finish)
                        Czytaj dalej
                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                        -Taper shankGeneral Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]60 ~ 100N/ASpiralN/A10.5 ~ 2516 ~ 34.5
                        Cena (bez VAT) od:
                        237.17 €
                        Standardowa data wysyłki:
                        6 dni robocze
                        Konfiguruj
                      • Carbide Reamer H Series
                        • ZNIŻKA
                        • Volume Discount

                        FPTOOLS

                        Carbide Reamer H Series

                        [Features]· Cutting speed can be increased by 50% compared to carbide straight blade types.· Ideal for deep drilling: Long neck section.· Excellent anterior chip discharge: 30° torsion, left
                        Czytaj dalej
                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                        1 ~ 15.5End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Cast Iron[◎] / Resin[○] / Die Steel[○] / Alloy Steel[◎]8 ~ 45N/ASpiralN/A--
                        Cena (bez VAT) od:
                        110.00 €
                        Cena specjalna
                        Standardowa data wysyłki:
                        Towar dostępny w magazynie: 1 dzień roboczy
                        Niektóre pozycje mogą zostać wysłane tego samego dnia
                        Konfiguruj
                      • BCCR Carbide Chucking Reamer (Straight Shank)
                        • Volume Discount

                        OKAZAKI SEIKO

                        BCCR Carbide Chucking Reamer (Straight Shank)

                        Tip brazing type, straight shank specification. The neck is thinner than the blade diameter to enable deep hole drilling.
                        Czytaj dalej
                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                        12.5 ~ 30Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]36 ~ 46N/AStraightN/A--
                        Cena (bez VAT) od:
                        126.32 €
                        Standardowa data wysyłki:
                        10 dni robocze
                        Konfiguruj
                      • CCR Carbide Chucking Reamer
                        • Volume Discount

                        OKAZAKI SEIKO

                        CCR Carbide Chucking Reamer

                        A solid type. The neck is thinner than the blade diameter to enable deep hole drilling.
                        Czytaj dalej
                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                        3 ~ 12Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]26 ~ 31N/AStraightN/A--
                        Cena (bez VAT) od:
                        36.45 €
                        Standardowa data wysyłki:
                        6 dni robocze
                        Konfiguruj
                      • CER Reamer with Carbide End Flutes
                        • Volume Discount

                        OKAZAKI SEIKO

                        CER Reamer with Carbide End Flutes

                        A solid type. A reamer for complete blind holes that's capable of cleanly processing the bottom surface. End mill shank is adopted.
                        Czytaj dalej
                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                        3 ~ 12End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]20 ~ 31N/ASpiralAvailable--
                        Cena (bez VAT) od:
                        97.90 €
                        Standardowa data wysyłki:
                        10 dni robocze
                        Konfiguruj
                      • HR Handle Reamer
                        • ZNIŻKA
                        • Volume Discount

                        OKAZAKI SEIKO

                        HR Handle Reamer

                        Cast iron and general steel hole finishing. Inch sizes are also available. Uses MCo material (cobalt high speed steel).
                        Czytaj dalej
                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                        1 ~ 40Straight ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]20 ~ 165N/AStraightN/A--
                        Cena (bez VAT) od:
                        31.56 €
                        Cena specjalna
                        Standardowa data wysyłki:
                        Towar dostępny w magazynie: 1 dzień roboczy
                        Niektóre pozycje mogą zostać wysłane tego samego dnia
                        Konfiguruj
                      • HRM Hand Reamer (Hundredths Range)
                        • Volume Discount

                        OKAZAKI SEIKO

                        HRM Hand Reamer (Hundredths Range)

                        Cast iron and general steel hole finishing. Uses MCo material (cobalt high speed steel).
                        Czytaj dalej
                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                        1.01 ~ 10.09Straight ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]20 ~ 70N/AStraightN/A--
                        Cena (bez VAT) od:
                        31.57 €
                        Standardowa data wysyłki:
                        6 dni robocze
                        Konfiguruj
                      • SPHR Spiral Flute Hand Reamer
                        • Volume Discount

                        OKAZAKI SEIKO

                        SPHR Spiral Flute Hand Reamer

                        Cast iron and general steel hole finishing. Inch sizes are also available. Uses MCo material (cobalt high speed steel).
                        Czytaj dalej
                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                        3 ~ 30Straight ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]40 ~ 150N/ASpiralN/A--
                        Cena (bez VAT) od:
                        41.52 €
                        Standardowa data wysyłki:
                        6 dni robocze
                        Konfiguruj
                      • Pipe Reamer PR
                        • Volume Discount

                        EIKOSHA

                        Pipe Reamer PR

                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                        -Straight ShankGeneral Steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]19 ~ 45N/AStraightN/A8.025 ~ 54.849.213 ~ 57.653
                        Cena (bez VAT) od:
                        91.94 €
                        Standardowa data wysyłki:
                        6 dni robocze
                        Konfiguruj
                      • Carbide Oil Hole Spiral Tapered Reamer CSPOTR

                          EIKOSHA

                          Carbide Oil Hole Spiral Tapered Reamer CSPOTR

                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                          -End Mill ShankGeneral Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]40 ~ 55N/ASpiralN/A-12.2 ~ 30.2
                          Cena (bez VAT) od:
                          306.66 €
                          Standardowa data wysyłki:
                          6 dni robocze
                          Konfiguruj
                        • Carbide High Helical Reamer CHHR

                            EIKOSHA

                            Carbide High Helical Reamer CHHR

                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                            2 ~ 14Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[◎]10 ~ 29N/AHelicalN/A--
                            Cena (bez VAT) od:
                            94.11 €
                            Standardowa data wysyłki:
                            6 dni robocze
                            Konfiguruj
                          • Large Machine Reamer LMR (SKH51)

                              TAIYO-TOOL

                              Large Machine Reamer LMR (SKH51)

                              [Shank Type]· Morse taper shank[Coating Y/N]· None[Groove Shape]· Straight[Base Blade Y/N] N
                              Czytaj dalej
                              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                              1/2 ~ 50Morse Taper Shank-120 ~ 400N/AStraightN/A--
                              Cena (bez VAT) od:
                              233.90 €
                              Standardowa data wysyłki:
                              6 dni robocze
                              Konfiguruj
                            • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model

                                MISUMI

                                Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model

                                [Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole.
                                Czytaj dalej
                                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                0.3 ~ 15.995End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 48N/AStraightAvailable--
                                Standardowa data wysyłki:
                                7 dni robocze
                                Konfiguruj
                              • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model

                                  MISUMI

                                  Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long Model

                                  [Features] -Since it has a flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole-Long type enables machining of deep holes
                                  Czytaj dalej
                                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                  0.3 ~ 5.995End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 34N/AStraightAvailable--
                                  Standardowa data wysyłki:
                                  8 dni robocze
                                  Konfiguruj
                                • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model

                                    MISUMI

                                    Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner Radius Model

                                    [Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole
                                    Czytaj dalej
                                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                    0.4 ~ 15.995End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 48N/AStraightAvailable--
                                    Standardowa data wysyłki:
                                    7 dni robocze
                                    Konfiguruj
                                  • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model

                                      MISUMI

                                      Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner Radius Model

                                      [Features] -Since it has a flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole-Long type enables machining of deep holes.
                                      Czytaj dalej
                                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                      0.4 ~ 5.995End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 34N/AStraightAvailable--
                                      Standardowa data wysyłki:
                                      8 dni robocze
                                      Konfiguruj
                                    • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model

                                        MISUMI

                                        Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular / Corner C Model

                                        [Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole
                                        Czytaj dalej
                                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                        0.4 ~ 15.995End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 48N/AStraightAvailable--
                                        Standardowa data wysyłki:
                                        7 dni robocze
                                        Konfiguruj
                                      • Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model

                                          MISUMI

                                          Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model

                                          [Features] -Since it has a flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole-Long type enables machining of deep holes
                                          Czytaj dalej
                                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                          0.4 ~ 5.995End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 34N/AStraightAvailable--
                                          Standardowa data wysyłki:
                                          8 dni robocze
                                          Konfiguruj
                                        • Spiral Reamer with Carbide Bottom Blade
                                          • Volume Discount

                                          MISUMI

                                          Spiral Reamer with Carbide Bottom Blade

                                          [Features] -Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function-Direct reaming is possible without correction by an end mill after drilling a pilot hole-Even higher cutting speed is possible by using spiral grooves
                                          Czytaj dalej
                                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                          3 ~ 10.01End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]20 ~ 30N/ASpiralAvailable--
                                          Cena (bez VAT) od:
                                          86.03 €
                                          Standardowa data wysyłki:
                                          5 dni robocze
                                          Konfiguruj
                                        • Carbide Straight Reamer, Regular Model

                                            MISUMI

                                            Carbide Straight Reamer, Regular Model

                                            [Features] -Standard carbide reamer with custom dimensions-Custom dimensions can be specified in units of 0.01 mm for the cutting diameter and 0.5 mm for the flute length
                                            Czytaj dalej
                                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                            0.3 ~ 15.99End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 48N/AStraightN/A--
                                            Standardowa data wysyłki:
                                            7 dni robocze
                                            Konfiguruj
                                          • Carbide Straight Reamer, Long Model

                                              MISUMI

                                              Carbide Straight Reamer, Long Model

                                              [Features] -Standard carbide reamer with custom dimensions-Custom dimensions can be specified in units of 0.01 mm for cutting diameter and 0.5 mm for flute length-Long design enables reaming of deep areas.
                                              Czytaj dalej
                                              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                              0.3 ~ 5.99End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 34N/AStraightN/A--
                                              Standardowa data wysyłki:
                                              8 dni robocze
                                              Konfiguruj
                                            • Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining
                                              • Volume Discount

                                              MISUMI

                                              Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining

                                              [Features] -Carbide material enables high-speed cutting, which greatly improves efficiency compared to high-speed steel reamers-TS-coated products are ideal for machining high-hardness steels with 40 HRC or more (TSC-XHR).
                                              Czytaj dalej
                                              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                              1 ~ 10End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]12 ~ 40N/AStraightN/A--
                                              Cena (bez VAT) od:
                                              37.11 €
                                              Standardowa data wysyłki:
                                              5 dni robocze
                                              Konfiguruj