Rejestracja

Tłumaczymy nasz sklep na język polski!

Wymaga to jednak czasu, ponieważ w ofercie mamy dużo artykułów, a na nasz sklep składa się wiele stron. Chwilowo nasz katalog produktów dostępny będzie w języku angielskim. Dziękujemy za cierpliwość!
Warunki filtrowania

Wyczyść wszystko

  • Stan magazynowy
  • Pitch (P), Number of Threading(mm)
  • Chamfer threads (Lcf)
  • Taps for Pipes

      • Taper Tap Series for Pipes General Applications TPT
        • ZNIŻKA
        • Volume Discount

        OSG

        Taper Tap Series for Pipes General Applications TPT

        For use when machining tapered female threads for pipes. Long threaded type used primarily for connecting pipe-shaped items
        Czytaj dalej
        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
        Taper for PipeR1 ~ R7/811 ~ 282.5PHigh-speed steelMedium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Tap for pipesFor through hole / For blind holeN/A
        Cena (bez VAT) od:
        17.00 €
        Cena specjalna
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Niektóre pozycje mogą zostać wysłane tego samego dnia
        Konfiguruj
      • Thread gauge
        • Volume Discount

        REX TOOLS

        Thread gauge

        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
        ---------
        Cena (bez VAT) od:
        8.03 €
        Standardowa data wysyłki:
        6 dni robocze
        Konfiguruj
      • Tapping combo head set
        • Volume Discount

        WERA

        Tapping combo head set

        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
        Meter--------
        Cena (bez VAT) od:
        87.75 €
        Standardowa data wysyłki:
        4 dni robocze
        Konfiguruj
      • For Tapered Screw for Pipe for Viscous Material (Long Screw Type Interflap: Left Twisted Spiral) INT-PT
        • Volume Discount

        YAMAWA MFG

        For Tapered Screw for Pipe for Viscous Material (Long Screw Type Interflap: Left Twisted Spiral) INT-PT

        [Features]· Tap that reduces cutting torque by removing 1 thread per land with loose leftward twist.· It is a tap particularly suitable for thread processing of viscous materials such as stainless steel and chrome molybdenum steel.
        Czytaj dalej
        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
        Taper for Pipe1/2-14-3PHigh-speed steelLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○]Tap for pipesFor through holeN/A
        Cena (bez VAT) od:
        131.20 €
        Standardowa data wysyłki:
        6 dni robocze
        Konfiguruj
      • Die metric
        • Volume Discount

        REX TOOLS

        Die metric

        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
        -M2 ~ M12-------
        Cena (bez VAT) od:
        4.48 €
        Standardowa data wysyłki:
        3 dni robocze
        Konfiguruj
      • Taper Tap Series for Pipes V Coated Carbide (For High Hardness Steel) VX-TPT

          OSG

          Taper Tap Series for Pipes V Coated Carbide (For High Hardness Steel) VX-TPT

          Exhibits Exceptional Power Toward 50-60 HRC and up Tempered Steel (Alloy Steel, Die Steel, Tool Steel, etc.)
          Czytaj dalej
          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
          Taper for PipeR1/2 ~ R3/814 ~ 283PCarbideHigh Hardness Steel (50-60 HRC)[◎]Tap for pipesFor through hole / For blind holeAvailable
          Cena (bez VAT) od:
          168.46 €
          Standardowa data wysyłki:
          6 dni robocze
          Konfiguruj
        • Taper Tap Series for Pipes Spiral Fluted SFT-TPT

            OSG

            Taper Tap Series for Pipes Spiral Fluted SFT-TPT

            It is used for machining of pipe taper female threads, but is suitable for easy processing conditions.
            Czytaj dalej
            Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
            Taper for PipeR1 ~ R3/811 ~ 282.5PHigh-speed steelMedium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○]Tap for pipesFor blind holeN/A
            Cena (bez VAT) od:
            24.17 €
            Standardowa data wysyłki:
            6 dni robocze
            Konfiguruj
          • CNC tapping head set
            • Volume Discount

            REX TOOLS

            CNC tapping head set

            Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
            ---------
            Cena (bez VAT) od:
            83.01 €
            Standardowa data wysyłki:
            3 dni robocze
            Konfiguruj
          • Die metric (precision)
            • Volume Discount

            REX TOOLS

            Die metric (precision)

            Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
            -M12 ~ M25 x 1.5-------
            Cena (bez VAT) od:
            17.17 €
            Standardowa data wysyłki:
            3 dni robocze
            Konfiguruj
          • Thread repair kit
            • Volume Discount

            REX TOOLS

            Thread repair kit

            Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
            -M5 ~ M12-------
            Cena (bez VAT) od:
            23.55 €
            Standardowa data wysyłki:
            3 dni robocze
            Konfiguruj
          • Hand tap, Finish tap
            • Volume Discount

            RUKO

            Hand tap, Finish tap

            Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
            MeterM2--High-speed steel-Hand Tap--
            Cena (bez VAT) od:
            5.32 €
            Standardowa data wysyłki:
            3 dni robocze
            Konfiguruj
          • Taper Tap Series for Pipes TIN Coated TIN-TPT
            • Volume Discount

            OSG

            Taper Tap Series for Pipes TIN Coated TIN-TPT

            TIN coating with excellent solvent resistance, abrasion resistance has been applied.
            Czytaj dalej
            Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
            Taper for PipeR1 ~ R3/811 ~ 282.5PVanadium High-Speed SteelLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]Tap for pipesFor through hole / For blind holeAvailable
            Cena (bez VAT) od:
            30.48 €
            Standardowa data wysyłki:
            6 dni robocze
            Konfiguruj
          • Taper Tap Series for Pipes TIN Coating Interrupted Thread TIN-IRT
            • Volume Discount

            OSG

            Taper Tap Series for Pipes TIN Coating Interrupted Thread TIN-IRT

            TIN coating with excellent solvent resistance, abrasion resistance has been applied.
            Czytaj dalej
            Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
            Taper for PipeR1 ~ R3/811 ~ 282.5PCarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[◎]Tap for pipesFor through hole / For blind holeAvailable
            Cena (bez VAT) od:
            39.15 €
            Standardowa data wysyłki:
            6 dni robocze
            Konfiguruj
          • Taper Tap Series for Pipes TIN Coating Interrupted Thread Short Screws TIN-S-IRT

              OSG

              Taper Tap Series for Pipes TIN Coating Interrupted Thread Short Screws TIN-S-IRT

              TIN coating with excellent solvent resistance, abrasion resistance has been applied.
              Czytaj dalej
              Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
              Taper for PipeR1 ~ R3/811 ~ 282.5PCarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[◎]Tap for pipesFor through hole / For blind holeAvailable
              Cena (bez VAT) od:
              41.25 €
              Standardowa data wysyłki:
              6 dni robocze
              Konfiguruj
            • Taper Tap Series for Pipes TIN Coated Short Screws TIN-S-TPT
              • Volume Discount

              OSG

              Taper Tap Series for Pipes TIN Coated Short Screws TIN-S-TPT

              TIN coating with excellent solvent resistance, abrasion resistance has been applied.
              Czytaj dalej
              Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
              Taper for PipeR1 ~ R3/811 ~ 282.5PVanadium High-Speed SteelLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]Tap for pipesFor through hole / For blind holeAvailable
              Cena (bez VAT) od:
              31.88 €
              Standardowa data wysyłki:
              6 dni robocze
              Konfiguruj
            • Taper Tap Series for Pipes V Coating Powder HSS (For High Hardness Steel) V-XPM-TPT

                OSG

                Taper Tap Series for Pipes V Coating Powder HSS (For High Hardness Steel) V-XPM-TPT

                Used for machining of pipe taper female threads, but is suitable for easy processing conditions
                Czytaj dalej
                Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                Taper for PipeR1 ~ R3/811 ~ 283PPowder high-speed steelQuenched and tempered steel (45 to 55 HRC)[◎]Tap for pipesFor through hole / For blind holeAvailable
                Cena (bez VAT) od:
                45.80 €
                Standardowa data wysyłki:
                6 dni robocze
                Konfiguruj
              • Taper Tap Series for Pipes For Aluminum V-AL-TPT
                • Volume Discount

                OSG

                Taper Tap Series for Pipes For Aluminum V-AL-TPT

                Ideal for taper female screw machining for aluminum alloy tube, as gouging of female screw occurs easily
                Czytaj dalej
                Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                Taper for PipeR1 ~ R3/811 ~ 282.5PVanadium High-Speed SteelCopper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎]Tap for pipesFor through hole / For blind holeAvailable
                Cena (bez VAT) od:
                27.23 €
                Standardowa data wysyłki:
                6 dni robocze
                Konfiguruj
              • Taper Tap Series for Pipes Interrupted Threads Long Shank EX-LT-IRT

                  OSG

                  Taper Tap Series for Pipes Interrupted Threads Long Shank EX-LT-IRT

                  Suited for machining hard-to-cut materials such as stainless steel and heat resistant alloy that are prone to produce work hardened layers or deposition.
                  Czytaj dalej
                  Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                  Taper for PipeR1 ~ R3/811 ~ 282.5PCarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless Steel (JIS-SUS)[◎] / Cast Iron (FC)[○]Tap for pipesFor through hole / For blind holeN/A
                  Cena (bez VAT) od:
                  50.57 €
                  Standardowa data wysyłki:
                  6 dni robocze
                  Konfiguruj
                • Taper Tap Series for Pipes Interrupted Thread Short Screws EX-S-IRT
                  • Volume Discount

                  OSG

                  Taper Tap Series for Pipes Interrupted Thread Short Screws EX-S-IRT

                  Suited for machining hard-to-cut materials such as stainless steel and heat resistant alloy that are prone to produce work hardened layers or deposition.
                  Czytaj dalej
                  Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                  Taper for PipeR1 ~ R3/811 ~ 282.5PCarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless Steel (JIS-SUS)[◎] / Cast Iron (FC)[○]Tap for pipesFor through hole / For blind holeN/A
                  Cena (bez VAT) od:
                  29.40 €
                  Standardowa data wysyłki:
                  6 dni robocze
                  Konfiguruj
                • Taper Tap Series for Pipes Interrupted Thread Short Screws Long Shank EX-LT-S-IRT

                    OSG

                    Taper Tap Series for Pipes Interrupted Thread Short Screws Long Shank EX-LT-S-IRT

                    Suited for machining hard-to-cut materials such as stainless steel and heat resistant alloy that are prone to produce work hardened layers or deposition.
                    Czytaj dalej
                    Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                    Taper for PipeR1 ~ R3/811 ~ 282.5PCarbideLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless Steel (JIS-SUS)[◎] / Cast Iron (FC)[○]Tap for pipesFor through hole / For blind holeN/A
                    Cena (bez VAT) od:
                    52.87 €
                    Standardowa data wysyłki:
                    6 dni robocze
                    Konfiguruj
                  • Tapered Tap Series For Pipes, For Stainless Steel Use EX-SUS-TPT

                      OSG

                      Tapered Tap Series For Pipes, For Stainless Steel Use EX-SUS-TPT

                      It can be used to machine female tapered pipe threads. It is suitable for difficult-to-cut materials such as stainless steel.
                      Czytaj dalej
                      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                      Taper for PipeR1 ~ R3/811 ~ 282.5P-Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Tap for pipesFor through hole / For blind holeN/A
                      Cena (bez VAT) od:
                      24.17 €
                      Standardowa data wysyłki:
                      6 dni robocze
                      Konfiguruj
                    • Taper Tap Series for Pipes For Stainless Steel Long Shank LT-SUS-TPT

                        OSG

                        Taper Tap Series for Pipes For Stainless Steel Long Shank LT-SUS-TPT

                        This type with a long shaft is used for machining tapered internal threads in pipes. It is suitable for difficult-to-cut materials such as stainless steel.
                        Czytaj dalej
                        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                        Taper for PipeR1/2 ~ R3/814 ~ 282.5PCarbideStainless Steel (JIS-SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Tap for pipesFor through hole / For blind holeN/A
                        Cena (bez VAT) od:
                        40.55 €
                        Standardowa data wysyłki:
                        6 dni robocze
                        Konfiguruj
                      • Taper Tap Series for Pipes Spiral Fluted for Stainless Steel SUS-SFT-TPT

                          OSG

                          Taper Tap Series for Pipes Spiral Fluted for Stainless Steel SUS-SFT-TPT

                          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                          Taper for PipeG1/2 ~ G3/814 ~ 282.5PVanadium High-Speed SteelStainless Steel (JIS-SUS)[◎]Spiral TapFor blind holeN/A
                          Cena (bez VAT) od:
                          29.78 €
                          Standardowa data wysyłki:
                          6 dni robocze
                          Konfiguruj
                        • Taper Tap Series for Pipes Spiral Fluted Short Screws for Stainless Steel SUS-SFT-S-TPT

                            OSG

                            Taper Tap Series for Pipes Spiral Fluted Short Screws for Stainless Steel SUS-SFT-S-TPT

                            This is a short thread type used for machining tapered internal threads in pipes. It is suitable for blind holes with hard-to-cut materials such as stainless steel.
                            Czytaj dalej
                            Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                            Taper for PipeR1 ~ R3/811 ~ 282.5PVanadium High-Speed SteelStainless Steel (JIS-SUS)[◎]Tap for pipesFor blind holeN/A
                            Cena (bez VAT) od:
                            31.28 €
                            Standardowa data wysyłki:
                            6 dni robocze
                            Konfiguruj
                          • Taper Tap Series for Pipes Short Screws for Stainless EX-SUS-S-TPT

                              OSG

                              Taper Tap Series for Pipes Short Screws for Stainless EX-SUS-S-TPT

                              This is a short thread type used for machining tapered internal threads in pipes. It is suitable for hard-to-cut materials such as stainless steel.
                              Czytaj dalej
                              Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                              Taper for PipeR1 ~ R3/811 ~ 282.5PCarbideStainless Steel (JIS-SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Tap for pipesFor through hole / For blind holeN/A
                              Cena (bez VAT) od:
                              25.37 €
                              Standardowa data wysyłki:
                              6 dni robocze
                              Konfiguruj
                            • Taper Tap Series for Pipes Short Screws for Stainless Steel Long Shank LT-SUS-S-TPT

                                OSG

                                Taper Tap Series for Pipes Short Screws for Stainless Steel Long Shank LT-SUS-S-TPT

                                This is a short thread, long shank type used for machining tapered internal threads. It is suitable for difficult-to-cut materials such as stainless steel.
                                Czytaj dalej
                                Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                Taper for PipeR1/2 ~ R3/814 ~ 282.5PCarbideStainless Steel (JIS-SUS)[◎] / Copper (Cu)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]Tap for pipesFor through hole / For blind holeN/A
                                Cena (bez VAT) od:
                                46.86 €
                                Standardowa data wysyłki:
                                6 dni robocze
                                Konfiguruj
                              • Taper Tap Series for Pipes Spiral Fluted Long Shank LT-SFT-TPT

                                  OSG

                                  Taper Tap Series for Pipes Spiral Fluted Long Shank LT-SFT-TPT

                                  It is used for machining of pipe taper female threads, but is suitable for easy processing conditions.
                                  Czytaj dalej
                                  Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                  Taper for PipeR1/2 ~ R3/814 ~ 282.5PHigh-speed steelMedium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○]Tap for pipesFor blind holeN/A
                                  Cena (bez VAT) od:
                                  40.55 €
                                  Standardowa data wysyłki:
                                  6 dni robocze
                                  Konfiguruj
                                • Taper Tap Series for Pipes Spiral Fluted Long Shank Short Screws LT-SFT-S-TPT

                                    OSG

                                    Taper Tap Series for Pipes Spiral Fluted Long Shank Short Screws LT-SFT-S-TPT

                                    It is used for machining of pipe taper female threads, but is suitable for easy processing conditions.
                                    Czytaj dalej
                                    Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                    Taper for PipeR1/2 ~ R3/814 ~ 282.5PHigh-speed steelMedium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○]Tap for pipesFor blind holeN/A
                                    Cena (bez VAT) od:
                                    47.66 €
                                    Standardowa data wysyłki:
                                    6 dni robocze
                                    Konfiguruj
                                  • Taper Tap Series for Pipes Spiral Fluted Short Screws SFT-S-TPT
                                    • Volume Discount

                                    OSG

                                    Taper Tap Series for Pipes Spiral Fluted Short Screws SFT-S-TPT

                                    It is used for machining of pipe taper female threads, but is suitable for easy processing conditions.
                                    Czytaj dalej
                                    Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                    Taper for PipeR1 ~ R3/811 ~ 282.5PHigh-speed steelMedium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Magnesium Alloy (MC)[○]Tap for pipesFor blind holeN/A
                                    Cena (bez VAT) od:
                                    26.27 €
                                    Standardowa data wysyłki:
                                    6 dni robocze
                                    Konfiguruj
                                  • Taper Tap Series for Pipes General Applications Short Screw S-TPT
                                    • Volume Discount

                                    OSG

                                    Taper Tap Series for Pipes General Applications Short Screw S-TPT

                                    For use when machining tapered female threads for pipes. Short Threaded Type used for tapping short-length threads, such as Elbow, Tees, etc.
                                    Czytaj dalej
                                    Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                    Taper for PipeR1 ~ R3/811 ~ 282.5PHigh-speed steelMedium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]Tap for pipesFor through hole / For blind holeN/A
                                    Cena (bez VAT) od:
                                    19.77 €
                                    Standardowa data wysyłki:
                                    6 dni robocze
                                    Konfiguruj
                                  • Taper Tap Series for Pipes Taper Tap OT-TPT

                                      OSG

                                      Taper Tap Series for Pipes Taper Tap OT-TPT

                                      Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass, cast iron, aluminum casting alloys and other workpieces with high precision automatic machine.
                                      Czytaj dalej
                                      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                      Taper for PipeR1/2 ~ R3/814 ~ 282.5PCarbideCast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎]Tap for pipesFor through hole / For blind holeN/A
                                      Cena (bez VAT) od:
                                      133.79 €
                                      Standardowa data wysyłki:
                                      6 dni robocze
                                      Konfiguruj
                                    • Taper Tap Series for Pipes Taper Tap for Carbide Pipes Long Shank OT-LT-TPT

                                        OSG

                                        Taper Tap Series for Pipes Taper Tap for Carbide Pipes Long Shank OT-LT-TPT

                                        Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass, cast iron, aluminum casting alloys and other workpieces with high precision automatic machine.
                                        Czytaj dalej
                                        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                        Taper for PipeR1/2 ~ R3/814 ~ 282.5PCarbideCast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎]Tap for pipesFor through hole / For blind holeN/A
                                        Cena (bez VAT) od:
                                        162.75 €
                                        Standardowa data wysyłki:
                                        6 dni robocze
                                        Konfiguruj
                                      • Taper Tap Series for Pipes Taper Tap Short Screws for Carbide OT-S-TPT

                                          OSG

                                          Taper Tap Series for Pipes Taper Tap Short Screws for Carbide OT-S-TPT

                                          Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass, cast iron, aluminum casting alloys and other workpieces with high precision automatic machine.
                                          Czytaj dalej
                                          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                          Taper for PipeR1/2 ~ R3/814 ~ 282.5PCarbideCast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎]Tap for pipesFor through hole / For blind holeN/A
                                          Cena (bez VAT) od:
                                          133.79 €
                                          Standardowa data wysyłki:
                                          6 dni robocze
                                          Konfiguruj
                                        • Taper Tap Series for Pipes for Difficult-to-Cut Materials CPM-TPT
                                          • Volume Discount

                                          OSG

                                          Taper Tap Series for Pipes for Difficult-to-Cut Materials CPM-TPT

                                          Workpiece material is suitable for internal thread machining of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging
                                          Czytaj dalej
                                          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                          Taper for PipeR1 ~ R3/811 ~ 282.5PPowder high-speed steelHigh Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]Tap for pipesFor through hole / For blind holeN/A
                                          Cena (bez VAT) od:
                                          29.98 €
                                          Standardowa data wysyłki:
                                          6 dni robocze
                                          Konfiguruj
                                        • Taper Tap Series for Pipes for Difficult-to-Cut Materials Short Screw CPM-S-TPT
                                          • Volume Discount

                                          OSG

                                          Taper Tap Series for Pipes for Difficult-to-Cut Materials Short Screw CPM-S-TPT

                                          Workpiece material is suitable for internal thread machining of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging
                                          Czytaj dalej
                                          Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                          Taper for PipeR1 ~ R3/811 ~ 192.5PPowder high-speed steelMedium carbon steel (carbon content 0.25 to 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]Tap for pipesFor through hole / For blind holeN/A
                                          Cena (bez VAT) od:
                                          44.76 €
                                          Standardowa data wysyłki:
                                          6 dni robocze
                                          Konfiguruj
                                        • Taper Tap Series for Pipes Short Screws for Difficult-To-Cut Materials CPM-LT-S-TPT

                                            OSG

                                            Taper Tap Series for Pipes Short Screws for Difficult-To-Cut Materials CPM-LT-S-TPT

                                            Workpiece material is suitable for internal thread machining of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging
                                            Czytaj dalej
                                            Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                            Taper for PipeR1 ~ R3/811 ~ 282.5PPowder high-speed steelHigh Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]Tap for pipesFor through hole / For blind holeN/A
                                            Cena (bez VAT) od:
                                            60.18 €
                                            Standardowa data wysyłki:
                                            6 dni robocze
                                            Konfiguruj
                                          • Parallel Taper Tap Series for Pipes Spiral Fluted for Stainless Steel SUS-SFT-SPT
                                            • Volume Discount

                                            OSG

                                            Parallel Taper Tap Series for Pipes Spiral Fluted for Stainless Steel SUS-SFT-SPT

                                            Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                            Parallel for PipesG1 ~ G3/811 ~ 282.5PVanadium High-Speed SteelStainless Steel (JIS-SUS)[◎] / Copper (Cu)[○]Spiral TapFor blind holeN/A
                                            Cena (bez VAT) od:
                                            20.93 €
                                            Standardowa data wysyłki:
                                            6 dni robocze
                                            Konfiguruj
                                          • Parallel Tap Series for Pipes New Roll Tap NRT-SPT
                                            • Volume Discount

                                            OSG

                                            Parallel Tap Series for Pipes New Roll Tap NRT-SPT

                                            [Features] A new thread former with overall lengths of 65 mm and 80 mm.[Features] It can be used for side mounting of pipe screws and deep hole machining.
                                            Czytaj dalej
                                            Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                            Parallel for PipesPF3/8192.5PHigh-speed steelLow-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[○]Tap for pipesFor through hole / For blind holeN/A
                                            Cena (bez VAT) od:
                                            55.97 €
                                            Standardowa data wysyłki:
                                            6 dni robocze
                                            Konfiguruj
                                          • Parallel Tap Series for Pipes General Applications SPT
                                            • ZNIŻKA
                                            • Volume Discount

                                            OSG

                                            Parallel Tap Series for Pipes General Applications SPT

                                            For use when machining parallel female pipe taper threads and female pipe parallel threads
                                            Czytaj dalej
                                            Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                            Parallel for PipesG1 ~ G7/811 ~ 281.5P ~ 4PHigh-speed steelMedium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]Tap for pipesFor through hole / For blind holeN/A
                                            Cena (bez VAT) od:
                                            14.96 €
                                            Cena specjalna
                                            Standardowa data wysyłki:
                                            Towar dostępny w magazynie: 1 dzień roboczy
                                            Niektóre pozycje mogą zostać wysłane tego samego dnia
                                            Konfiguruj
                                          • Parallel Tap Series for Pipes Parallel Tap for Carbide Pipes OT-SPT

                                              OSG

                                              Parallel Tap Series for Pipes Parallel Tap for Carbide Pipes OT-SPT

                                              In conjunction with the work shape, point shape in through holes, and spiral shape in blind holes are available.
                                              Czytaj dalej
                                              Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                              Parallel for PipesG1/2 ~ G3/814 ~ 283PCarbideCast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎]Tap for pipesFor through hole / For blind holeN/A
                                              Cena (bez VAT) od:
                                              121.33 €
                                              Standardowa data wysyłki:
                                              6 dni robocze
                                              Konfiguruj
                                            • Parallel Tap Series for Pipes Parallel Tap for Carbide Pipes Long Shank OT-LT-SPT

                                                OSG

                                                Parallel Tap Series for Pipes Parallel Tap for Carbide Pipes Long Shank OT-LT-SPT

                                                In conjunction with the work shape, point shape in through holes, and spiral shape in blind holes are available.
                                                Czytaj dalej
                                                Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                                Parallel for PipesG1/2 ~ G3/814 ~ 283PCarbideCast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎]Tap for pipesFor through hole / For blind holeN/A
                                                Cena (bez VAT) od:
                                                148.20 €
                                                Standardowa data wysyłki:
                                                6 dni robocze
                                                Konfiguruj
                                              • Taper Tap Series for American Pipes for General Application (NPSF) SPT

                                                  OSG

                                                  Taper Tap Series for American Pipes for General Application (NPSF) SPT

                                                  Used for machining of parallel female pipe taper threads and female pipe parallel threads
                                                  Czytaj dalej
                                                  Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                                  Parallel for PipesNPS1/16274PHigh-speed steelMedium carbon steel (carbon content 0.25 to 0.45%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]Tap for pipesFor through hole / For blind holeN/A
                                                  Cena (bez VAT) od:
                                                  30.94 €
                                                  Standardowa data wysyłki:
                                                  6 dni robocze
                                                  Konfiguruj
                                                • C.T.G Thick Conduit Pipe Screw Tap

                                                    SKC

                                                    C.T.G Thick Conduit Pipe Screw Tap

                                                    It can be easily used by anyone, reduces precious production time to the minimum and improves work efficiency
                                                    Czytaj dalej
                                                    Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                                    OtherCTG-22 ~ CTG-1614-High-speed steelLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Tap for pipes--
                                                    Cena (bez VAT) od:
                                                    134.91 €
                                                    Standardowa data wysyłki:
                                                    6 dni robocze
                                                    Konfiguruj
                                                  • Pg Conduit Thread Tap (German Standard)

                                                      SKC

                                                      Pg Conduit Thread Tap (German Standard)

                                                      It can be easily used by anyone, reduces precious production time to the minimum and improves work efficiency
                                                      Czytaj dalej
                                                      Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                                      OtherPG918-High-speed steelLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]Tap for pipes--
                                                      Cena (bez VAT) od:
                                                      113.75 €
                                                      Standardowa data wysyłki:
                                                      6 dni robocze
                                                      Konfiguruj
                                                    • For Tapered Screw for Pipe (Short Screw Type) S-PT

                                                        YAMAWA MFG

                                                        For Tapered Screw for Pipe (Short Screw Type) S-PT

                                                        A cutting tap used for screw tapping in connecting pipes and pipe parts where the main purpose is mechanical connection. Can be used for machining tapered threads requiring durability such as water pipes and gas pipes
                                                        Czytaj dalej
                                                        Screw TypesScrew size (Nominal)Pitch (P), Number of Threading(mm)Chamfer threads (Lcf)Tool Material Typework materialTap TypeHole typeCoating Y/N
                                                        Taper for Pipe1/8-28 ~ 3/8-19-2.5PHigh-speed steelLow-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]Tap for pipesFor through hole / For blind holeN/A
                                                        Cena (bez VAT) od:
                                                        30.69 €
                                                        Standardowa data wysyłki:
                                                        8 dni robocze
                                                        Konfiguruj