Point Taps (Coating Type: TiCN)

• 

  • Volume Discount

  OSG

  Point Tap Series, V Coated, V-POT

  Compatible with a wide range of materials - soft materials to hard materials. Displays particularly good performance in tapping under high speed, highly dilution (water soluble cutting fluid) conditions. Also Effective For Dry-Tapping

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8 ～ M10	1 ～ 1.25	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	Available

  Cena (bez VAT) od:

  24.73 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  OSG

  Point Tap Series, V Coating, Long Shank, V-LT-POT

  Compatible with a wide range of materials - soft materials to hard materials. Displays particularly good performance in tapping under high speed, highly dilution (water soluble cutting fluid) conditions. Also Effective For Dry-Tapping

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M4 ～ M6	0.7 ～ 1	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○/◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	Available

  Cena (bez VAT) od:

  23.17 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount

  SANDVIK

  CoroTap 200 3 × DN Point Tap JIS EP0DM

  [Features]·Wide selection of power strip for different work materials·For work materials with long cutting chips

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M3 ～ M24	0.5 ～ 3	-	-	-	Point tap	-	Available

  Cena (bez VAT) od:

  36.85 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  NACHI(FUJIKOSHI)

  SG Point Tap SGPO

  [Features]・ A tap for through-holes, supporting various cutting speeds, machinery, and work materials.

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M2.6	0.45	5	High-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Point tap	For through hole	Available

  Cena (bez VAT) od:

  35.33 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj