Screw-Hole-Related Tools（work material：Thermoplastic plastic (vinyl chloride, nylon, etc.)）
Search by sub-category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Tap Wrenches
Modification/Removal Tools
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Promotional pricing ends 30/11/2024
Taper Tap Series for Pipes General Applications TPT
OSG
For use when machining tapered female threads for pipes. Long threaded type used primarily for connecting pipe-shaped items- Volume Discount
Configure nowStarting from∗ ： 19.86 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Spiral Tap Series, General Purpose EX-SFT
OSG
Suited for drilling blind holes in materials that leave coil shaped connected cutting debris such as carbon steel, alloyed steel, and non-ferrous metals.- Volume Discount
- Stock
Configure nowStarting from∗ ： 7.97 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Trapezoidal Thread Cutting Tap _TMB 29100
WALTER PROTOTYP
HSS-E, Cutting Blade 24 x P, 5° Left Torsion, 200 to 900 N/mm² Work Material or 28 HRC, for Long- and Short-Chipping Work MaterialConfigure nowStarting from∗ ： 693.66 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, Tin Coated, TIN-POT
OSG
Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel- Volume Discount
Configure nowStarting from∗ ： 15.45 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Point Tap Series, for General, EX-POT
OSG
Suited for materials that leave coil shaped connected cutting dust that is in general use such as carbon steel, alloyed steel, and non-ferrous metals. Reliably Pushes Cutting Debris Forward Removing Concerns of Debris Interference- Volume Discount
Configure nowStarting from∗ ： 7.45 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spiral Tap Series, Tin Coated, TIN-SFT
OSG
The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.- Volume Discount
Configure nowStarting from∗ ： 16.04 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, V Coated, V-POT
OSG
Compatible with a wide range of materials - soft materials to hard materials. Displays particularly good performance in tapping under high speed, highly dilution (water soluble cutting fluid) conditions. Also Effective For Dry-Tapping- Volume Discount
Configure nowStarting from∗ ： 24.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, for Stainless EX-SUS-SFT
OSG
Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.- Volume Discount
Configure nowStarting from∗ ： 8.81 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, General Purpose, Long Shank EX-LT-SFT
OSG
Used in cases such as insufficient protruding length of the threaded portion of the standard spiral tap- Volume Discount
Configure nowStarting from∗ ： 14.47 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Point Tap Series For Stainless Steel Use EX-SUS-POT
OSG
Offers superb sharpness and durability. Can be used to drill holes in difficult-to-cut stainless steel.- Volume Discount
Configure nowStarting from∗ ： 8.65 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Point Tap Series, Ultra Synchronizing Taps, HS-RFT
OSG
Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.- Volume Discount
Configure nowStarting from∗ ： 30.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread, No Finishing Flute 60°
CARMEX
It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide, and is effective for threading deep holes for both internal and outer diameter threads.Configure nowStarting from∗ ： 208.53 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Spiral Tap Series, Carbide Spiral Tap OT-SFT
OSG
Suitable for massive tapping of blind hole of aluminum alloy/magnesium alloy/copper alloy/thermoplastic plastic by high precision automatic machineConfigure nowStarting from∗ ： 72.40 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread G (55°)
CARMEX
Threading can be performed for both internal and external threads with a single pass.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 229.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Planet Cutter Series NC-Planet Cutters WX-PNC
OSG
Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.- Volume Discount
Configure nowStarting from∗ ： 158.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Spiral Tap Series, for Stainless Steel / Deep Holes SUS-DH-SFT
OSG
Ideal for deep hole drilling of stainless steel beyond 2D.
Working material: Stainless steel / copper / resin
Coating: Surface treatment, steam oxide treatment.- Volume Discount
Configure nowStarting from∗ ： 10.88 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Hand Tap Series, for Stainless Steel, EX-SUS-HT
OSG
Suited for machining stainless steel, heat-resistant steel, and nickel manganese steel. Cut carbon steel and alloy steel as well.- Volume Discount
Configure nowStarting from∗ ： 10.09 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC
OSG
The planet cutter is able to mill M1 - M5 small diameter female screws. Ideal for Preventing Defects in High Value Added Manufactured Articles and for Tapping without a Pilot Hole Margin- Volume Discount
Configure nowStarting from∗ ： 101.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread Metric Screw (ISO)
CARMEX
Enables internal threading to be performed in a single pass.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 229.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread BSPT
CARMEX
For both internal and external threading.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 229.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Tapered End Mill
CARMEX
[Features]
· Carbide solid tapered end mills are used for pre-process machining when thread milling the screws of tapered shapes such as pipe screws.
· Increases the service life of solid carbide type mill threads or mill thread tips.
· Equal and proper load will be applied to the cutting edge of the mill thread cutter.
· By applying taper shape pre-processing, the machining time of the mill thread is shortened- Volume Discount
Configure nowStarting from∗ ： 119.87 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Jet Mini Mill Thread for Aircraft MJ
CARMEX
It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide and since it has lubrication hole in spiral groove, it is also suitable for machines that do not have external lubrication device.Configure nowStarting from∗ ： 217.83 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 10.88 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 14.02 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MTI Mini Mill Thread, w / o Finishing Teeth, for Both 60° Inner / Outer Diameters
CARMEX
For both internal and external threading
[Features]
· Ultrafine particle carbide and new type three-layer PVD coatingConfigure nowStarting from∗ ： 208.52 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Spiral Tap Series, Tin Coated, Long Shank, TIN-LT-SFT
OSG
The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.- Volume Discount
Configure nowStarting from∗ ： 23.77 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Spiral Tap Series, V Coated, V-SFT
OSG
Can be used on a wide variety of materials soft materials to hard materials. Particularly suited for tapping under high speed, high dilution (water soluble cutting fluid) conditions.- Volume Discount
Configure nowStarting from∗ ： 17.33 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Spiral Tap Series, for Stainless Steel / Deep Holes Long Shank, LT-SUS-DH-SFT
OSG
Ideal for Deep Hole Drilling of Stainless Steel Over 2D- Volume Discount
Configure nowStarting from∗ ： 25.91 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spiral Tap Series, for Stainless Steel (Long Shank) EX-LT-SUS-SFT
OSG
Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.- Volume Discount
Configure nowStarting from∗ ： 14.52 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, Low Spiral LW-SFT
OSG
Debris is chopped into fine pieces and expelled backward thanks to the grooves with a weak twist, allowing for stable tapping. Also has good chipping resistance qualities.- Volume Discount
Configure nowStarting from∗ ： 9.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, High-Speed Synchronized Tap Long Shank HS-LT-SFT
OSG
Suited for blind thread cutting using machinery equipped with complete lead feeding mechanisms.Configure nowStarting from∗ ： 32.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, for Copper, CU-SFT
OSG
Treated With CRN Coating Which Shows Excellent Friction Resistance and Anti-Sticking Properties Against Copper and Use of HSSE as Material Allows Long Lived Machining on Copper- Volume Discount
Configure nowStarting from∗ ： 26.27 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Spiral Tap Series, for Soft Steel / Deep Holes MS-DH-SFT
OSG
Suitable for blind hole drilling where debris related tap jamming and internal thread biting can easily occur.- Volume Discount
Configure nowStarting from∗ ： 8.89 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spiral Tap Series, for Non-Ferrous Alloys / Deep Holes EX-B-DH-SFT
OSG
Suitable for blind hole drilling where debris related tap jamming and internal thread biting can easily occur.- Volume Discount
Configure nowStarting from∗ ： 11.71 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Hand Tap Series, Hand Taps for Super Hard Diecast, OT-DC-HT
OSG
Suitable for massive tapping of aluminum alloy castings by high precision automatic machineConfigure nowStarting from∗ ： 66.96 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Planet Cutter Series MC-Planet Cutters PNGT
OSG
Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.Configure nowStarting from∗ ： 205.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Planet Cutter Series Planet Cutters with Oil Holes for Steel WXO-ST-PNC
OSG
By spraying machining oil compound from the lubrication hole, allows effective removal of cutting debris.Configure nowStarting from∗ ： 165.90 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT
OSG
Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel- Volume Discount
Configure nowStarting from∗ ： 22.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, V Coating, Long Shank, V-LT-POT
OSG
Compatible with a wide range of materials - soft materials to hard materials. Displays particularly good performance in tapping under high speed, highly dilution (water soluble cutting fluid) conditions. Also Effective For Dry-TappingConfigure nowStarting from∗ ： 23.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, Long Shank for Stainless Steel, EX-LT-SUS-POT
OSG
Shows the great sharpness and durability when used in through holes of machinability bad stainless steel- Volume Discount
Configure nowStarting from∗ ： 14.35 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, General Homo Treatment, EX-H-POT
OSG
Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap- Volume Discount
Configure nowStarting from∗ ： 8.22 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Point Tap Series, General Long Shank, EX-LT-POT
OSG
Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap- Volume Discount
Configure nowStarting from∗ ： 14.02 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Point Tap Series, High Speed Synchronizing Taps, JIS Shank, J-HS-RFT
OSG
Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.- Volume Discount
Configure nowStarting from∗ ： 21.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, High Speed Synchronizing Taps, Long Shank, HS-LT-RFT
OSG
Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.Configure nowStarting from∗ ： 27.13 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Point Tap Series, for Deep Holes, EX-DH-POT
OSG
Suitable for through holes with extra long threads and materials that easily suffer sticking.- Volume Discount
Configure nowStarting from∗ ： 8.65 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Screw Types |
| Screw size (Nominal) |
| Pitch (P), Number of Threading(mm) |
| Chamfer threads (Lcf) |
| Tool Material Type |
| work material |
| Tap Type |
| Hole type |
| Coating Y/N |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | WALTER PROTOTYP | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | CARMEX | OSG | CARMEX | OSG | OSG | OSG | OSG | CARMEX | CARMEX | CARMEX | CARMEX | OSG | OSG | CARMEX | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | Spiral Tap Series, for Stainless Steel / Deep Holes SUS-DH-SFT | Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC | Spiral Tap Series, General Purpose Sewing Machine (SM) Screw, EX-SFT-SM | Point Tap Series, General Homo Treatment Long Shank, EX-LT-H-POT | MTI Mini Mill Thread, w / o Finishing Teeth, for Both 60° Inner / Outer Diameters | Spiral Tap Series, for Stainless Steel / Deep Holes Long Shank, LT-SUS-DH-SFT | Spiral Tap Series, for Stainless Steel (Long Shank) EX-LT-SUS-SFT | Spiral Tap Series, High-Speed Synchronized Tap Long Shank HS-LT-SFT | Spiral Tap Series, for Non-Ferrous Alloys / Deep Holes EX-B-DH-SFT | Planet Cutter Series Planet Cutters with Oil Holes for Steel WXO-ST-PNC | Point Tap Series, Long Shank for Stainless Steel, EX-LT-SUS-POT | Point Tap Series, High Speed Synchronizing Taps, JIS Shank, J-HS-RFT | Point Tap Series, High Speed Synchronizing Taps, Long Shank, HS-LT-RFT | ||||||||||||||||||||||||||||||||
| Starting from∗ | 19.86 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 7.97 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 693.66 € *Unit price with basic configuration | 15.45 € *Unit price with basic configuration Volume Discount | 7.45 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 16.04 € *Unit price with basic configuration Volume Discount | 24.73 € *Unit price with basic configuration Volume Discount | 8.81 € *Unit price with basic configuration Volume Discount | 14.47 € *Unit price with basic configuration Volume Discount | 8.65 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 30.20 € *Unit price with basic configuration Volume Discount | 208.53 € *Unit price with basic configuration | 72.40 € *Unit price with basic configuration | 229.39 € *Unit price with basic configuration | 158.30 € *Unit price with basic configuration Volume Discount | 10.88 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 10.09 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 101.50 € *Unit price with basic configuration Volume Discount | 229.39 € *Unit price with basic configuration | 229.39 € *Unit price with basic configuration | 119.87 € *Unit price with basic configuration Volume Discount | 217.83 € *Unit price with basic configuration | 10.88 € *Unit price with basic configuration Volume Discount | 14.02 € *Unit price with basic configuration Volume Discount | 208.52 € *Unit price with basic configuration | 23.77 € *Unit price with basic configuration Volume Discount | 17.33 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 25.91 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 14.52 € *Unit price with basic configuration Volume Discount | 9.50 € *Unit price with basic configuration Volume Discount | 32.98 € *Unit price with basic configuration | 26.27 € *Unit price with basic configuration | 8.89 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 11.71 € *Unit price with basic configuration Volume Discount | 66.96 € *Unit price with basic configuration | 205.83 € *Unit price with basic configuration | 165.90 € *Unit price with basic configuration | 22.83 € *Unit price with basic configuration Volume Discount | 23.17 € *Unit price with basic configuration | 14.35 € *Unit price with basic configuration Volume Discount | 8.22 € *Unit price with basic configuration Volume Discount | 14.02 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 21.73 € *Unit price with basic configuration Volume Discount | 27.13 € *Unit price with basic configuration | 8.65 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount |
| Min. Shipping Days | Same day | Same day | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 5 Days | 6 Days | 5 Days | 6 Days | Same day | Same day | 6 Days | 5 Days | 5 Days | 5 Days | 5 Days | 6 Days | 6 Days | 5 Days | 6 Days | Same day | Same day | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | Same day |
| Specifications |
| ||||||||||||||||||||||||||||||||||||||||||||
| Screw Types | Taper for Pipe | Meter / Unified | Trapezoid | Meter | Meter / Unified / Whitworth / Sewing Machine | Meter | Meter | Meter / Unified / Whitworth | Meter | Meter / Unified / Whitworth | Meter | Meter | Meter | Parallel for Pipes | Meter / Unified / Taper for Pipe | Meter | Meter | Meter / Unified | Meter | Parallel for Pipes | Taper for Pipe | Other | Sewing Machine | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter / Taper for Pipe / Parallel for Pipes | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter |
| Screw size (Nominal) | R1 ～ R3/8 | 1UN ～ M56 | Tr8 ～ Tr18 | M1.4 ～ M42 | No0UN ～ M48 | M1.4 ～ M16 | M8 ～ M10 | 1UN ～ M42 | M2 ～ M36 | 1UN ～ M42 | M3 ～ M14 | - | M3 ～ M12 | - | - | M2.5 ～ M10 | M3 | - | M3 ～ M27 | - | - | - | SM1/4 ～ SM15/64 | M3 ～ M20 | - | M3 ～ M16 | M2 ～ M16 | M3 | M3 ～ M24 | M6 | M3 ～ M10 | M10 | M2.6 ～ M10 | M8 ～ M16 | M3 ～ M12 | - | - | M3 ～ M24 | M4 ～ M6 | M3 ～ M24 | M2 ～ M42 | M2 ～ M36 | M3 ～ M14 | M3 ～ M30 | M2 ～ M16 |
| Pitch (P), Number of Threading(mm) | 11 ～ 28 | 0.25 ～ 48 | 1.5 ～ 4 | 0.3 ～ 4.5 | 0.25 ～ 80 | 0.3 ～ 2 | 1 ～ 1.25 | 0.4 ～ 48 | 0.4 ～ 4 | 0.3 ～ 48 | 0.5 ～ 2 | - | 0.5 ～ 1.75 | 11 ～ 28 | 1 ～ 28 | 0.45 ～ 1.5 | 0.5 | 0.25 ～ 32 | 0.5 ～ 3 | - | - | - | 20 ～ 56 | 0.5 ～ 2.5 | - | 0.5 ～ 2 | 0.4 ～ 2 | 0.5 | 0.5 ～ 3 | 1 | 0.5 ～ 1.5 | 1.5 | 0.45 ～ 1.5 | 1.25 ～ 1.5 | 0.5 ～ 1.75 | 1 ～ 19 | 0.5 ～ 3 | 0.5 ～ 3 | 0.7 ～ 1 | 0.5 ～ 3 | 0.4 ～ 4.5 | 0.4 ～ 4 | 0.5 ～ 2 | 0.5 ～ 3.5 | 0.4 ～ 2 |
| Chamfer threads (Lcf) | 2.5P | 2.5P ～ 3P | - | 5P | 5P | 2.5P | 5P | 2.5P ～ 3P | 2.5P | 4P | 6P | - | 1.5P ～ 2.5P | - | - | 2.5P | 1.5P | - | - | - | - | - | 2.5P | 5P | - | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 3P | 2.5P | 2.5P | 2.5P | 1.5P | - | - | 5P | 5P | 4P | 5P | 5P | 5P | 6P | 4P |
| Tool Material Type | High-speed steel | Vanadium High-Speed Steel | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | Carbide | Carbide | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | Carbide | Carbide | Carbide | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Cobalt HSS | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel |
| work material | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] |
| Tap Type | Tap for pipes | Spiral Tap | Spiral Tap | Point tap | Point tap | Spiral Tap | Point tap | Spiral Tap | Spiral Tap | Point tap | Point tap | Thread cutter | Spiral Tap | Thread cutter | Thread cutter | Spiral Tap | Hand Tap | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Spiral Tap | Point tap | Thread cutter | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Hand Tap | Thread cutter | Thread cutter | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap |
| Hole type | For through hole / For blind hole | For blind hole | For through hole | For through hole | For through hole | For blind hole | For through hole | For blind hole | For blind hole | For through hole | For through hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For blind hole | - | For blind hole | For blind hole | For through hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole |
| Coating Y/N | N/A | N/A | N/A | Available | N/A | Available | Available | N/A | N/A | N/A | Available | Available | N/A | Available | Available | N/A | N/A | Available | Available | Available | Available | Available | N/A | N/A | Available | Available | Available | N/A | N/A | N/A | Available | Available | N/A | N/A | N/A | Available | Available | Available | Available | N/A | N/A | N/A | Available | Available | N/A |
| Coating Type | Non-Coated | Non-Coated | Non-Coated | TiN | Non-Coated | TiN | TiCN | Non-Coated | Non-Coated | Non-Coated | TiN | Nitriding Treatment | Non-Coated | Nitriding Treatment | TiAlN | Non-Coated | Non-Coated | For High Hardness (Silicon Group) / Other | TiAlN | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Non-Coated | Non-Coated | Nitriding Treatment | TiN | Other | Non-Coated | Non-Coated | Non-Coated | TiN | CrN | Non-Coated | Non-Coated | Non-Coated | TiN | TiAlN | TiN | TiCN | Non-Coated | Non-Coated | Non-Coated | TiN | TiN | Non-Coated |
| Overall Length (L)(mm) | 59 ～ 109 | 30 ～ 205 | 90 ～ 225 | 34 ～ 175 | 30 ～ 185 | 34 ～ 95 | 70 ～ 75 | 40 ～ 175 | 80 ～ 300 | 34 ～ 175 | 46 ～ 88 | 58 ～ 101 | 46 ～ 82 | 58 ～ 105 | 60 ～ 120 | 44 ～ 75 | 46 | 40 | 58 ～ 120 | 58 ～ 105 | 58 ～ 84 | 58 ～ 64 | 42 ～ 65 | 100 ～ 150 | 39 ～ 58 | 100 ～ 150 | 40 ～ 95 | 120 | 100 ～ 150 | 62 | 100 ～ 150 | 75 | 44 ～ 75 | 70 ～ 95 | 46 ～ 82 | 80 ～ 210 | 60 ～ 120 | 100 ～ 200 | 100 | 100 ～ 200 | 40 ～ 175 | 80 ～ 300 | 46 ～ 88 | 100 ～ 200 | 40 ～ 95 |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No0UN
- NO.0-80UNF
- No.0-80UNF
- No.10
- S0.1
- NO.1-72UNF
- No.1-72UNF
- NO.1-64UNC
- No.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12-32UNEF
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- No.4
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- No.6
- S0.6
- NO.6-40UNF
- No.6-40UNF
- No.6-32UNC
- S0.7
- No.8
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- S0.9
- 1"
- 1UN
- 1UNS
- G1
- G 1"
- M1
- NPS1
- NPT1
- NPTF1
- No1UN
- PF1
- PF 1
- PT 1
- R1
- Rp1
- S1
- UNC 1
- UNC 1"
- UNF 1"
- W1
- 1´-20UNEF
- 1´-14UNS
- 1'-12UNF
- 1´-12UNF
- 1´-11
- 1′-11
- 1-8UNC
- 1'-8UNC
- 1´-8UNC
- G1"-3"
- 1"1/2UN
- 1"1/2
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1´1/2-11
- 1′1/2-11
- 1 1/2-8UN
- 1"1/4UN
- 1"1/4
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1´1/4-11
- 1′1/4-11
- 1 1/4-8UN
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1 1/8-8UN
- 1´ 1/8-7UNC
- 1"1/16UN
- 1/2
- 1/2UN
- G1/2
- G 1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF 1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC 1/2
- UNF 1/2
- UNJF 1/2
- W1/2
- 1/2-28UNEF
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- G1/2 5/8
- 1/2W12
- 1 3/4
- 1"3/4UN
- G1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1′3/4-11
- 1 3/4-8UN
- 1 3/8
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- G1/4
- G 1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PS 1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC 1/4
- UNF 1/4
- UNJF 1/4
- W1/4
- 1/4-32UNEF
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4W20
- W1"5/8
- 1 5/8-8UN
- W1"7/8
- 1 7/8-8UN
- 1'W8
- 1/8
- G1/8
- G 1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8SM40
- 1/8SM44
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- 1/16-28
- 1/16SM80
- M1.1
- G 1.1/2
- G 1.1/4
- G 1.1/8
- M1.2
- S1.2
- M1.4
- S1.4
- M1.6
- M1.7
- M1.8
- 2"
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- No2UN
- R2
- Rp2
- UNC 2
- UNF 2
- W2
- 2´-11
- 2′-11
- 2-8UN
- G2"1/2
- R2"1/2
- Rp2"1/2
- 2′1/2-11
- W2"1/4
- M2.2
- M2.3
- M2.5
- M2.6
- 3M
- EGM 3
- G3
- M3
- M3.0
- No3UN
- R3
- Rp3
- STI M3
- UNC 3
- UNF 3
- 3′-11
- G3"1/2
- R3"1/2
- Rp3"1/2
- 3/4
- 3/4UN
- G3/4
- G 3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF 3/4
- R3/4
- Rp3/4
- UNC 3/4
- UNF 3/4
- W3/4
- 3/4-20UNEF
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- 3/8
- 3/8UN
- G3/8
- G 3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC 3/8
- UNF 3/8
- UNJF 3/8
- W3/8
- 3/8-32UNEF
- 3/8-24UNF
- 3/8-19
- 3/8-16UNC
- 3/8W16
- M3 - M10
- M3～10
- M3 - M12
- SM3/16
- W3/16
- 3/16SM24
- 3/16W24
- 3/16SM28
- 3/16SM32
- 3/16SM40
- M3 - M18
- SM3/32
- 3/32SM56
- 3/32SM100
- 3.5
- M3.5
- 4
- 4M
- EGM 4
- G4
- M4
- M4.0
- MF4
- No4UN
- R4
- Rp4
- STI M4
- UNC 4
- UNF 4
- №4-40UNC
- M4～6
- M4.5
- 5M
- EGM 5
- M5
- M5.0
- MF5
- No5UN
- STI M5
- UNC 5
- №5-40UNC
- 5/8
- 5/8UN
- G5/8
- G 5/8
- NPS5/8
- R5/8
- UNC 5/8
- UNF 5/8
- W5/8
- 5/8-24UNEF
- 5/8-18UNF
- 5/8-11UNC
- G5/8 3/4
- 5/8W11
- M5 - M12
- M5～13
- 5/16
- 5/16UN
- UNC 5/16
- UNF 5/16
- UNJF 5/16
- W5/16
- 5/16-32UNEF
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- W5/32
- 5/64SM64
- 5.5M
- M5.5
- 6
- EGM 6
- M6
- M6.0
- MF6
- No6UN
- STI M6
- UNC 6
- UNF 6
- UNJC 6
- No6-40UNF
- №6-32UNC
- M7
- MF7
- PG7
- 7 execution M3 - M12
- 7/8
- 7/8UN
- G7/8
- G 7/8
- NPS7/8
- R7/8
- UNC 7/8
- UNF 7/8
- W7/8
- 7/8-20UNEF
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- UNC 7/16
- UNF 7/16
- UNJF 7/16
- W7/16
- 7/16-28UNEF
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- SM7/32
- 7.5
- M7.5
- EGM 8
- M8
- MF8
- No8UN
- STI M8
- Tr8
- UNC 8
- UNF 8
- UNJC 8
- №8-32UNC
- 9
- M9
- PG9
- 9/16
- 9/16UN
- UNC 9/16
- UNF 9/16
- 9/16-18UNF
- 9/16-12UNC
- 9/16W12
- SM9/32
- SM9/64
- 9/64SM40
- M9.5
- EGM 10
- M10
- MF10
- No10UN
- STI M10
- Tr10
- Tr 10
- UNC10
- UNC 10
- UNF 10
- UNJF 10
- №10-32UNF
- №10-24UNC
- M10～25
- M11
- PG11
- SM11/32
- SM11/64
- 11/64SM40
- EGM 12
- M12
- MF12
- Mf12
- No12UN
- STI M12
- Tr12
- Tr 12
- UNC 12
- UNF 12
- M12 x 1.5
- M13
- PG13.5
- M14
- MF14
- Tr 14
- M15
- SM15/64
- 15/64SM28
- M16
- MF16
- Mf16
- PG16
- Tr16
- Tr 16
- M16 x 1.5
- M17
- M18
- MF18
- Tr18
- Tr 18
- M19
- M20
- MF20
- Mf20
- Tr 20
- M20 x 1.5
- M21
- PG21
- M22
- M22X
- MF22
- Tr 22
- M23
- M24
- M24X
- MF24
- Tr 24
- M25
- M25X
- MF25
- Mf25
- Tr 25
- M25 x 1.5
- M26
- MF26
- Tr 26
- M27
- MF27
- M28
- MF28
- Tr 28
- PG29
- M30
- MF30
- Tr 30
- M32
- Mf32
- M33
- M34
- M35
- M36
- PG36
- M37
- M38
- M39
- M40
- M42
- PG42
- M44
- M45
- M46
- M48
- M50
- M52
- M56
- M64
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Pitch (P), Number of Threading(mm)
-
Chamfer threads (Lcf)
-
Tool Material Type
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Tap Type
-
Hole type
-
Coating Y/N
-
Coating Type
-
Overall Length (L)(mm)
Brand
-
- MISUMI (0)
- OSG (44)
- CARMEX (31)
- NS TOOL (1)
- WALTER PROTOTYP (1)
- NACHI(FUJIKOSHI) (0)
- SKC (0)
- BERNSTEIN AG (0)
- KANETEC (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- STAHLWILLE (0)
- H & H (0)
- RUKO (0)
- BAHCO (0)
- ENGINEER (0)
- LIGHTSEIKI (0)
- HAZET (0)
- TRUSCO NAKAYAMA (0)
- SANDVIK (0)
- WERA (0)
- WIHA (0)
- FEIN (0)
- EIKOSHA (0)
- TANOI MFG (0)
- ISHIHASHI (0)
- RENNSTEIG (0)
- GEDORE (0)
- ESCO (0)
- YAMAWA MFG (0)
- GUHRING (0)
- REX TOOLS (0)
- NOGAJAPAN (0)
CAD data type
-
- 2D
- 3D
Categories related to Screw-Hole-Related Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
Metoda płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.