Screw-Hole-Related Tools（work material：Low-Carbon Steel (carbon alloy less than 0.25%)）
Search by sub-category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Tap Wrenches
Modification/Removal Tools
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
SG Spiral Tap SGSP
NACHI(FUJIKOSHI)
[Features]
-Demonstrates excellent performance in a variety of materials, machining equipment and a wide range of cutting conditions.Configure nowStarting from∗ ： 30.24 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Trapezoidal Thread Cutting Tap _TMB 29100
WALTER PROTOTYP
HSS-E, Cutting Blade 24 x P, 5° Left Torsion, 200 to 900 N/mm² Work Material or 28 HRC, for Long- and Short-Chipping Work MaterialConfigure nowStarting from∗ ： 693.66 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, Tin Coated, TIN-POT
OSG
Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel- Volume Discount
Configure nowStarting from∗ ： 15.45 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
A Tap Series for Pipes Point Tap A-POT
OSG
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.- Volume Discount
Configure nowStarting from∗ ： 15.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
A Tap Series, Spiral Tap, A-SFT
OSG
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.- Volume Discount
Configure nowStarting from∗ ： 16.04 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spiral Tap Series, Tin Coated, TIN-SFT
OSG
The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.- Volume Discount
Configure nowStarting from∗ ： 16.04 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Groove-Free Tap Series X Performer S-XPF
OSG
When working carbon steel and alloyed steel has fewer problems with cutting debris compared to cutting taps, allowing longer lasting machining. Particularly effective in working with automobile related cast steel parts
* M2.6 and below will be changed to constant powdered high strength steel (CPM). Please understand ahead of time.- Volume Discount
Configure nowStarting from∗ ： 19.66 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Point Tap Series, V Coated, V-POT
OSG
Compatible with a wide range of materials - soft materials to hard materials. Displays particularly good performance in tapping under high speed, highly dilution (water soluble cutting fluid) conditions. Also Effective For Dry-Tapping- Volume Discount
Configure nowStarting from∗ ： 24.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, Ultra Synchronizing Taps, HS-RFT
OSG
Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.- Volume Discount
Configure nowStarting from∗ ： 30.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread, No Finishing Flute 60°
CARMEX
It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide, and is effective for threading deep holes for both internal and outer diameter threads.Configure nowStarting from∗ ： 208.53 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
High-Speed Steel Hand Tap【10 Pieces Per Package】
MISUMI
[Features]
A general purpose hand tap made from uncoated high speed steel
High versatility, suitable for a wide range of applications and materials such as aluminium and general steel.- Volume Discount
Configure nowStarting from∗ ： 34.11 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Hand Tap Series, Tin Coated, TIN-HT
OSG
Excellent cutting edge strength makes it suitable for high hardness material machining without chipping.- Volume Discount
Configure nowStarting from∗ ： 16.26 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Groove-Free Tap Series, Tin Coated, TIN-NRT
OSG
Suitable for both steel and non-ferrous alloys. Capable of high-speed cutting and efficient tapping; offer drastically improved durability.- Volume Discount
Configure nowStarting from∗ ： 17.52 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Carbide Solid Mill Thread G (55°)
CARMEX
Threading can be performed for both internal and external threads with a single pass.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 229.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads
MISUMI
The left-flute left-rotary cutting that's achieved by the original geometry and coating allow the milling threading of high hardness steel of up to HRC62.- Volume Discount
Configure nowStarting from∗ ： 222.23 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Planet Cutter Series NC-Planet Cutters WX-PNC
OSG
Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.- Volume Discount
Configure nowStarting from∗ ： 158.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TiN Coated High-Speed Steel Spiral Tap【1-5 Pieces Per Package】
MISUMI
The high-precision toothed 1.5P type for blind hole drilling and long shank type that's ideal in the deep threading of workpieces are also available- Volume Discount
Configure nowStarting from∗ ： 14.59 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiN Coated High-Speed Steel Point Tap【1-5 Pieces Per Package】
MISUMI
[Features]
-Can be used for through hole machining
-Suitable for a wide range of materials, but is particularly effective for tapping steel alloys and stainless steel etc.
-Excellent abrasion resistance and resistance to chip welding due to TiN coating
-Long shank, ideal for drilling deep tapped holes (G-LS-POT).- Volume Discount
Configure nowStarting from∗ ： 13.81 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Groove-Free Tap Series Carbide New Roll Tap Long Shank OT-LT-NRT
OSG
Suitable for massive tapping of aluminum alloy/magnesium alloy/copper alloy by high precision automatic machine.Configure nowStarting from∗ ： 117.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Pg Conduit Thread Tap (German Standard)
SKC
It can be easily used by anyone, reduces precious production time to the minimum and improves work efficiencyConfigure nowStarting from∗ ： 102.74 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tap for Gas Pipes
SKC
[Features]
It can be used to cut tapped holes in gas pipes.
[Features]
It uses high-speed steel with excellent heat resistance and resistance to thermal damage.- Volume Discount
Configure nowStarting from∗ ： 12.06 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Configure nowStarting from∗ ： 10.91 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Spiral Flute Tap SP (N-SP)
YAMAWA MFG
The spiral flute tap is ideal for machining blind holes as cutting chip is discharged from the grooves twisted in the same direction as the threads.
[Features]
・ The grooves are twisted in the same direction as the threads for not only good scrap discharging performance but also great cutting performance.
・ Intermittent cutting of female threads with keyway is also possible.
・ Capable of machining both synchronously and asynchronously.
・ Ideal for machining blind holds as the groove is twisted, continuous small coiled scraps are discharged to the rear, and it does not cause cutting chip clogging.
・ Ideal for tapping especially sticky work materials, plastics, etc. due to its sharpness.
・ The tap can easily cut.
・ Intermittent cutting of pilot holes with keyway is also possible.
・ Since the blade strength is inferior to HT, the HT shape is more suitable for hard materials.
[Applications]
・ Ideal for machining blind holes.- Volume Discount
Configure nowStarting from∗ ： 8.94 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
High Performance Roll Tap HP+ RZ / HP-RZ
YAMAWA MFG
It is suitable for processing steel materials (35 HRC or less) and light alloys, and can support high-speed machining (20-50 m/min)- Volume Discount
Configure nowStarting from∗ ： 24.43 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 25.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap For Through Holes & Trapezoidal Threads SL Tr
YAMAWA MFG
[Features]
· The angle of the thread crest is 30°.
· The symbol used for the thread is represented by "Tr."Configure nowStarting from∗ ： 327.22 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
High-Speed Steel Point Tap【10 Pieces Per Package】
MISUMI
[Features]
-High speed uncoated steel tap with spiral point
-Can be used for through hole machining
-Effective for continuous chip materials such as carbon steel and steel alloys.- Volume Discount
Configure nowStarting from∗ ： 62.86 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MT Series High-Speed Steel Point Tap
MISUMI
[New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping.
[Slide Discount] Great deals are available on the purchase of more than 5 pieces.- Volume Discount
Configure nowStarting from∗ ： 7.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Taflet for Steel TFST
NACHI(FUJIKOSHI)
Suitable for thread rolling of mild steel, stainless steel below 20HRC of hardness.Configure nowStarting from∗ ： 19.23 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC
OSG
The planet cutter is able to mill M1 - M5 small diameter female screws. Ideal for Preventing Defects in High Value Added Manufactured Articles and for Tapping without a Pilot Hole Margin- Volume Discount
Configure nowStarting from∗ ： 101.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Groove-Free Tap Series TIN Coated Long Shank TIN-LT-NRT
OSG
Suitable for both steel and non-ferrous alloys. Capable of high-speed cutting and efficient tapping; offer drastically improved durability.Configure nowStarting from∗ ： 24.43 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Groove-Free Tap Series VP New Roll Short Chamfer VP-SC-NRT
OSG
Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.- Volume Discount
Configure nowStarting from∗ ： 19.89 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Groove-Free Tap Series VP New Roll Long Shank VP-LT-NRT
OSG
Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.Configure nowStarting from∗ ： 24.43 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Groove-Free Tap Series for Steel HRT
OSG
Suited for high stretch materials such as low-carbon steel, low-carbon alloyed steel and stainless steel due to plasticity deformation formed screws. Particularly Suited For Blind Holes Due to Lack of Debris- Volume Discount
Configure nowStarting from∗ ： 8.41 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Groove-Free Tap Series for Steel NRT
OSG
Suited for high stretch materials such as low-carbon steel, low-carbon alloyed steel and stainless steel due to plasticity deformation formed screws. Particularly Suited For Blind Holes Due to Lack of Debris- Volume Discount
Configure nowStarting from∗ ： 10.08 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Groove-Free Tap Series Carbide New Roll Tap OT-NRT
OSG
Suitable for massive tapping of aluminum alloy/magnesium alloy/copper alloy by high precision automatic machine.Configure nowStarting from∗ ： 85.84 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap (for metal screws)
TRUSCO NAKAYAMA
[Characteristics]
Spiral tap for regular steel.
[Use]
For pilot hole machining.
Work materials: general steel, low to medium carbon steel, alloy steel.Configure nowStarting from∗ ： 10.01 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
IT-Toughlet C Coated
TANOI MFG
Rise tap with a correct bite without pitch or angle errors.- Volume Discount
Configure nowStarting from∗ ： 38.28 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Seamless TAFLET
TANOI MFG
Rise tap with a correct bite without pitch or angle errors.- Volume Discount
Configure nowStarting from∗ ： 58.01 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Hand Tap - Whitworth Screw for Coarse Thread (55° Angle)
SKC
Used for General Tapping- Volume Discount
Configure nowStarting from∗ ： 11.37 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Hand Tap - Metric Fine Thread Screw
SKC
[Features]
It can be used for engraving thread grooves of fine threads.
[Features]
For right-hand threads.- Volume Discount
Configure nowStarting from∗ ： 13.92 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Round Adjustable Die
SKC
[Features]
Adjustable screw thread (die) used when machining external threads.- Volume Discount
Configure nowStarting from∗ ： 16.44 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plus Series Spiral Tap +SP (N+SP)
YAMAWA MFG
A spiral tap suitable for medium- to high-speed machining with machining centers, etc.
[Features]
· Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.
[Applications]
· Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).- Volume Discount
Configure nowStarting from∗ ： 17.48 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Plus Series Point Tap +PO (N+PO)
YAMAWA MFG
* N+SP will be replaced with +SP as soon as there is no more in stock.- Volume Discount
Configure nowStarting from∗ ： 10.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Point Tap PO(N-PO)
YAMAWA MFG
A point tap convenient for through-hole machining as scraps are ejected forward.
[Features]
· Slanting the groove on the cutting edge of the biting part pushes the scraps forward.
· Minimal scrap issues.
· Low cutting torque.
· Capable of machining both synchronously and asynchronously.
[Applications]
· Ideal for machining through-holes.
* N-PO models will transition to PO as soon as stock runs out.- Volume Discount
Configure nowStarting from∗ ： 15.26 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Screw Types |
| Screw size (Nominal) |
| Pitch (P), Number of Threading(mm) |
| Chamfer threads (Lcf) |
| Tool Material Type |
| work material |
| Tap Type |
| Hole type |
| Coating Y/N |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NACHI(FUJIKOSHI) | WALTER PROTOTYP | OSG | OSG | OSG | OSG | OSG | OSG | OSG | CARMEX | MISUMI | OSG | OSG | CARMEX | MISUMI | OSG | MISUMI | MISUMI | OSG | SKC | SKC | SKC | YAMAWA MFG | YAMAWA MFG | OSG | YAMAWA MFG | MISUMI | MISUMI | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | OSG | TRUSCO NAKAYAMA | TANOI MFG | TANOI MFG | SKC | SKC | SKC | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG |
| Product Series | TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads | TiN Coated High-Speed Steel Spiral Tap【1-5 Pieces Per Package】 | TiN Coated High-Speed Steel Point Tap【1-5 Pieces Per Package】 | Groove-Free Tap Series Carbide New Roll Tap Long Shank OT-LT-NRT | Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC | ||||||||||||||||||||||||||||||||||||||||
| Starting from∗ | 30.24 € *Unit price with basic configuration | 693.66 € *Unit price with basic configuration | 15.45 € *Unit price with basic configuration Volume Discount | 15.94 € *Unit price with basic configuration Volume Discount | 16.04 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 16.04 € *Unit price with basic configuration Volume Discount | 19.66 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 24.73 € *Unit price with basic configuration Volume Discount | 30.20 € *Unit price with basic configuration Volume Discount | 208.53 € *Unit price with basic configuration | 34.11 € *Unit price with basic configuration Volume Discount | 16.26 € *Unit price with basic configuration Volume Discount | 17.52 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 229.39 € *Unit price with basic configuration | 222.23 € *Unit price with basic configuration Volume Discount | 158.30 € *Unit price with basic configuration Volume Discount | 14.59 € *Unit price with basic configuration Volume Discount | 13.81 € *Unit price with basic configuration Volume Discount | 117.30 € *Unit price with basic configuration | 102.74 € *Unit price with basic configuration | 12.06 € *Unit price with basic configuration Volume Discount | 10.91 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 8.94 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 24.43 € *Unit price with basic configuration Volume Discount | 25.83 € *Unit price with basic configuration Volume Discount | 327.22 € *Unit price with basic configuration | 62.86 € *Unit price with basic configuration Volume Discount | 7.00 € *Unit price with basic configuration Volume Discount | 19.23 € *Unit price with basic configuration | 101.50 € *Unit price with basic configuration Volume Discount | 24.43 € *Unit price with basic configuration | 19.89 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 24.43 € *Unit price with basic configuration | 8.41 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 10.08 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 85.84 € *Unit price with basic configuration | 10.01 € *Unit price with basic configuration | 38.28 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 58.01 € *Unit price with basic configuration | 11.37 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 | 13.92 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 16.44 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 17.48 € *Unit price with basic configuration Volume Discount | 10.30 € *Unit price with basic configuration Volume Discount | 15.26 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount |
| Min. Shipping Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | Same day | 6 Days | 6 Days | 5 Days | 5 Days | 8 Days | Same day | 5 Days | 7 Days | 6 Days | 5 Days | 5 Days | 6 Days | 6 Days | 8 Days | Same day | Same day | 6 Days | 6 Days | 7 Days | 5 Days | 5 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | Same day | Same day | 6 Days | 6 Days | Same day | 6 Days | Same day | Same day | Same day | 8 Days | 6 Days | Same day |
| Screw Types | Meter | Trapezoid | Meter | Meter / Unified | Meter / Unified | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter / Unified | Parallel for Pipes | Meter | Meter / Unified / Taper for Pipe | Meter | Meter | Meter | Other | - | Meter | Meter | Meter / Unified | Meter | Trapezoid | Meter | Meter | Meter | Meter / Unified | Meter | Meter / Unified | Meter / Unified | Meter | Meter | Meter | Meter | Meter | Meter | Whitworth | Meter | Meter | Meter | Meter | Meter / Unified |
| Screw size (Nominal) | M2 ～ M24 | Tr8 ～ Tr18 | M1.4 ～ M42 | 1/2-20UNF ～ M24 | 1-8UNC ～ M56 | M1.4 ～ M16 | M1 ～ M45 | M8 ～ M10 | M3 ～ M14 | - | M3 ～ M10 | M2 ～ M24 | No0UN ～ M20 | - | M2 ～ M12 | - | M3 ～ M10 | M3 ～ M10 | M3 ～ M12 | PG7 ～ PG42 | R1/4 ～ R3/8 | M2.6 ～ M10 | M3 ～ M12 | No.10-32UNF ～ M20 | M3 ～ M12 | Tr 10 ～ Tr 30 | M2 ～ M12 | M2 ～ M24 | M1.4 ～ M10 | - | M3 ～ M12 | M1 ～ No6UN | M1 ～ M12 | M1 ～ M4 | M1.2 ～ M10 | M3 ～ M12 | M4 ～ M5 | M1 ～ M10 | M2 ～ M20 | W1/2 | M5 ～ M36 | M2.5 ～ M18 | M2.2 | M3 ～ M6 | No.10-32UNF ～ M24 |
| Pitch (P), Number of Threading(mm) | 0.25 ～ 3 | 1.5 ～ 4 | 0.3 ～ 4.5 | 0.25 ～ 3 | 0.25 ～ 5.5 | 0.3 ～ 2 | 0.2 ～ 4.5 | 1 ～ 1.25 | 0.5 ～ 2 | - | 0.5 ～ 1.5 | 0.4 ～ 3 | 0.25 ～ 80 | 11 ～ 28 | 0.4 ～ 1.75 | 1 ～ 28 | 0.5 ～ 1.5 | 0.5 ～ 1.5 | 0.5 ～ 1.75 | 16 ～ 20 | 19 ～ 28 | 0.45 ～ 1.5 | 0.5 ～ 1.25 | 0.25 ～ 1.75 | 0.5 ～ 1.75 | 2 ～ 6 | 0.4 ～ 1.75 | 0.4 ～ 3 | 0.3 ～ 1.5 | 0.25 ～ 32 | 0.5 ～ 1.75 | 0.25 ～ 56 | 0.25 ～ 56 | 0.25 ～ 0.7 | 0.25 ～ 1.25 | 0.5 ～ 1.75 | 0.7 ～ 0.8 | 0.2 ～ 1.5 | 0.4 ～ 2.5 | 12 | 0.5 ～ 2 | 0.45 ～ 2.5 | 0.45 | 0.5 ～ 1 | 0.3 ～ 2 |
| Chamfer threads (Lcf) | 2.5 | - | 5P | 5P | 1.5P ～ 2.5P | 2.5P | 2P ～ 4P | 5P | 6P | - | 1.5 P ～ 9 P | 1.5P ～ 5P | 2P ～ 4P | - | - | - | 1.5 P ～ 2.5 P | 5 P | 2P | - | - | 5P | 2.5P | 2P ～ 4P | - | 22P ～ 30P | 5 P | 5 P | 2P ～ 4P | - | 2P ～ 4P | 1P | 2P ～ 4P | 2.5P | 2P ～ 4P | 2P | 2.5P | 1P ～ 4P | 1P ～ 2P | 5P | 1.5P ～ 9P | - | 2.5P | 5P | 5P |
| Tool Material Type | Alloy HSS | Powder high-speed steel | Vanadium High-Speed Steel | Powder high-speed steel | Powder high-speed steel / Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel / Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | Carbide | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | High-speed steel | - | - | High-speed steel | Powder high-speed steel | Vanadium High-Speed Steel | High-speed steel | Vanadium High-Speed Steel | Cobalt HSS | High-speed steel | Carbide | Vanadium High-Speed Steel | Powder high-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | Carbide | Vanadium High-Speed Steel | High-speed steel | High-speed steel | - | - | - | High-speed steel | High-speed steel | High-speed steel |
| work material | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] |
| Tap Type | Spiral Tap | Spiral Tap | Point tap | Point tap | Spiral Tap | Spiral Tap | Roll tap | Point tap | Point tap | Thread cutter | Hand Tap | Hand Tap | Roll tap | Thread cutter | Thread cutter | Thread cutter | Spiral Tap | Point tap | Roll tap | Tap for pipes | Tap for pipes | Hand Tap | Spiral Tap | Roll tap | Roll tap | Spiral Tap | Point tap | Point tap | Roll tap | Thread cutter | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Roll tap | Spiral Tap | Roll tap | Roll tap | Hand Tap | Hand Tap | Die | Spiral Tap | Point tap | Point tap |
| Hole type | For through hole / For blind hole | For through hole | For through hole | For through hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole | For through hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole | For through hole / For blind hole | - | - | - | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | For through hole | For through hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | - | - | - | - | - | For blind hole | For through hole / For blind hole | For through hole |
| Coating Y/N | Available | N/A | Available | Available | Available | Available | Available | Available | Available | Available | N/A | Available | Available | Available | Available | Available | Available | Available | N/A | - | - | - | N/A | Available | Available | N/A | N/A | N/A | N/A | Available | Available | Available | Available | N/A | N/A | N/A | - | Available | Available | - | - | - | N/A | N/A | N/A |
| Coating Type | TiCN | Non-Coated | TiN | Other | Other | TiN | TiCN | TiCN | TiN | Nitriding Treatment | - | TiN | TiN | Nitriding Treatment | TiAlN | TiAlN | TiN | TiN | Non-Coated | - | - | - | - | TiCN | Other | - | - | Non-Coated | - | For High Hardness (Silicon Group) / Other | TiN | TiCN | TiCN | Non-Coated | Non-Coated | Non-Coated | - | Other | TiCN | - | - | - | - | - | - |
| Overall Length (L)(mm) | 40 ～ 120 | 90 ～ 225 | 34 ～ 175 | 34 ～ 120 | 34 ～ 250 | 34 ～ 95 | 30 ～ 220 | 70 ～ 75 | 46 ～ 88 | 58 ～ 101 | 46 ～ 75 | 40 ～ 120 | 30 ～ 105 | 58 ～ 105 | 58 ～ 73 | 60 ～ 120 | 46 ～ 150 | 46 ～ 150 | 100 ～ 150 | 85 ～ 135 | 55 ～ 65 | - | 46 ～ 82 | 36 ～ 105 | 80 ～ 150 | 160 ～ 300 | 40 ～ 82 | 40 ～ 120 | 34 ～ 75 | 40 | 80 ～ 150 | 30 ～ 62 | 60 ～ 200 | 30 ～ 52 | 32 ～ 75 | 46 ～ 82 | 52 ～ 60 | 30 ～ 75 | 40 ～ 105 | 85 | - | - | 42 | 46 ～ 62 | 36 ～ 120 |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No0UN
- NO.0-80UNF
- No.0-80UNF
- No.10
- S0.1
- NO.1-72UNF
- No.1-72UNF
- NO.1-64UNC
- No.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12-32UNEF
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- No.4
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- No.6
- S0.6
- NO.6-40UNF
- No.6-40UNF
- No.6-32UNC
- S0.7
- No.8
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- S0.9
- 1"
- 1UN
- 1UNS
- G1
- G 1"
- M1
- NPS1
- NPT1
- NPTF1
- No1UN
- PF1
- PF 1
- PT 1
- R1
- Rp1
- S1
- UNC 1
- UNC 1"
- UNF 1"
- W1
- 1´-20UNEF
- 1´-14UNS
- 1'-12UNF
- 1´-12UNF
- 1´-11
- 1′-11
- 1-8UNC
- 1'-8UNC
- 1´-8UNC
- G1"-3"
- 1"1/2UN
- 1"1/2
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1´1/2-11
- 1′1/2-11
- 1 1/2-8UN
- 1"1/4UN
- 1"1/4
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1´1/4-11
- 1′1/4-11
- 1 1/4-8UN
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1 1/8-8UN
- 1´ 1/8-7UNC
- 1"1/16UN
- 1/2
- 1/2UN
- G1/2
- G 1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF 1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC 1/2
- UNF 1/2
- UNJF 1/2
- W1/2
- 1/2-28UNEF
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- G1/2 5/8
- 1/2W12
- 1 3/4
- 1"3/4UN
- G1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1′3/4-11
- 1 3/4-8UN
- 1 3/8
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- G1/4
- G 1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PS 1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC 1/4
- UNF 1/4
- UNJF 1/4
- W1/4
- 1/4-32UNEF
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4W20
- W1"5/8
- 1 5/8-8UN
- W1"7/8
- 1 7/8-8UN
- 1'W8
- 1/8
- G1/8
- G 1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8SM40
- 1/8SM44
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- 1/16-28
- 1/16SM80
- M1.1
- G 1.1/2
- G 1.1/4
- G 1.1/8
- M1.2
- S1.2
- M1.4
- S1.4
- M1.6
- M1.7
- M1.8
- 2"
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- No2UN
- R2
- Rp2
- UNC 2
- UNF 2
- W2
- 2´-11
- 2′-11
- 2-8UN
- G2"1/2
- R2"1/2
- Rp2"1/2
- 2′1/2-11
- W2"1/4
- M2.2
- M2.3
- M2.5
- M2.6
- 3M
- EGM 3
- G3
- M3
- M3.0
- No3UN
- R3
- Rp3
- STI M3
- UNC 3
- UNF 3
- 3′-11
- G3"1/2
- R3"1/2
- Rp3"1/2
- 3/4
- 3/4UN
- G3/4
- G 3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF 3/4
- R3/4
- Rp3/4
- UNC 3/4
- UNF 3/4
- W3/4
- 3/4-20UNEF
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- 3/8
- 3/8UN
- G3/8
- G 3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC 3/8
- UNF 3/8
- UNJF 3/8
- W3/8
- 3/8-32UNEF
- 3/8-24UNF
- 3/8-19
- 3/8-16UNC
- 3/8W16
- M3 - M10
- M3～10
- M3 - M12
- SM3/16
- W3/16
- 3/16SM24
- 3/16W24
- 3/16SM28
- 3/16SM32
- 3/16SM40
- M3 - M18
- SM3/32
- 3/32SM56
- 3/32SM100
- 3.5
- M3.5
- 4
- 4M
- EGM 4
- G4
- M4
- M4.0
- MF4
- No4UN
- R4
- Rp4
- STI M4
- UNC 4
- UNF 4
- №4-40UNC
- M4～6
- M4.5
- 5M
- EGM 5
- M5
- M5.0
- MF5
- No5UN
- STI M5
- UNC 5
- №5-40UNC
- 5/8
- 5/8UN
- G5/8
- G 5/8
- NPS5/8
- R5/8
- UNC 5/8
- UNF 5/8
- W5/8
- 5/8-24UNEF
- 5/8-18UNF
- 5/8-11UNC
- G5/8 3/4
- 5/8W11
- M5 - M12
- M5～13
- 5/16
- 5/16UN
- UNC 5/16
- UNF 5/16
- UNJF 5/16
- W5/16
- 5/16-32UNEF
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- W5/32
- 5/64SM64
- 5.5M
- M5.5
- 6
- EGM 6
- M6
- M6.0
- MF6
- No6UN
- STI M6
- UNC 6
- UNF 6
- UNJC 6
- No6-40UNF
- №6-32UNC
- M7
- MF7
- PG7
- 7 execution M3 - M12
- 7/8
- 7/8UN
- G7/8
- G 7/8
- NPS7/8
- R7/8
- UNC 7/8
- UNF 7/8
- W7/8
- 7/8-20UNEF
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- UNC 7/16
- UNF 7/16
- UNJF 7/16
- W7/16
- 7/16-28UNEF
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- SM7/32
- 7.5
- M7.5
- EGM 8
- M8
- MF8
- No8UN
- STI M8
- Tr8
- UNC 8
- UNF 8
- UNJC 8
- №8-32UNC
- 9
- M9
- PG9
- 9/16
- 9/16UN
- UNC 9/16
- UNF 9/16
- 9/16-18UNF
- 9/16-12UNC
- 9/16W12
- SM9/32
- SM9/64
- 9/64SM40
- M9.5
- EGM 10
- M10
- MF10
- No10UN
- STI M10
- Tr10
- Tr 10
- UNC10
- UNC 10
- UNF 10
- UNJF 10
- №10-32UNF
- №10-24UNC
- M10～25
- M11
- PG11
- SM11/32
- SM11/64
- 11/64SM40
- EGM 12
- M12
- MF12
- Mf12
- No12UN
- STI M12
- Tr12
- Tr 12
- UNC 12
- UNF 12
- M12 x 1.5
- M13
- PG13.5
- M14
- MF14
- Tr 14
- M15
- SM15/64
- 15/64SM28
- M16
- MF16
- Mf16
- PG16
- Tr16
- Tr 16
- M16 x 1.5
- M17
- M18
- MF18
- Tr18
- Tr 18
- M19
- M20
- MF20
- Mf20
- Tr 20
- M20 x 1.5
- M21
- PG21
- M22
- M22X
- MF22
- Tr 22
- M23
- M24
- M24X
- MF24
- Tr 24
- M25
- M25X
- MF25
- Mf25
- Tr 25
- M25 x 1.5
- M26
- MF26
- Tr 26
- M27
- MF27
- M28
- MF28
- Tr 28
- PG29
- M30
- MF30
- Tr 30
- M32
- Mf32
- M33
- M34
- M35
- M36
- PG36
- M37
- M38
- M39
- M40
- M42
- PG42
- M44
- M45
- M46
- M48
- M50
- M52
- M56
- M64
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Pitch (P), Number of Threading(mm)
-
Chamfer threads (Lcf)
-
Tool Material Type
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Tap Type
-
Hole type
-
Coating Y/N
-
Coating Type
-
Overall Length (L)(mm)
Brand
-
- OSG (57)
- YAMAWA MFG (44)
- CARMEX (31)
- SKC (23)
- NACHI(FUJIKOSHI) (10)
- TRUSCO NAKAYAMA (7)
- TANOI MFG (4)
- NS TOOL (2)
- WALTER PROTOTYP (1)
- BERNSTEIN AG (0)
- KANETEC (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- STAHLWILLE (0)
- H & H (0)
- RUKO (0)
- BAHCO (0)
- ENGINEER (0)
- LIGHTSEIKI (0)
- HAZET (0)
- SANDVIK (0)
- WERA (0)
- WIHA (0)
- FEIN (0)
- EIKOSHA (0)
- ISHIHASHI (0)
- RENNSTEIG (0)
- GEDORE (0)
- ESCO (0)
- GUHRING (0)
- REX TOOLS (0)
- NOGAJAPAN (0)
CAD data type
-
- 2D
- 3D
Categories related to Screw-Hole-Related Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
Metoda płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.