Screw-Hole-Related Tools（Tool Material Type：Powder high-speed steel）

Search by sub-category

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

A Tap Series Point Tap Long Shank A-LT-POT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

Select to compare

Configure now
Starting from^∗ ：	23.65 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

A Tap Series, Spiral Tap, A-SFT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.04 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

A Tap Series, Spiral Tap, Long Shank A-LT-SFT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

Select to compare

Configure now
Starting from^∗ ：	24.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series VP New Roll VP-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Volume Discount

Select to compare

Configure now
Min. Shipping Days ：	6 Days

Groove-Free Tap Series VP New Roll Long Shank VP-LT-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Select to compare

Configure now
Starting from^∗ ：	24.43 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Point Tap Series, for Difficult-to-Machine Material, CPM-POT

OSG

Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	9.49 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

A Tap Series for Pipes Point Tap A-POT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	15.94 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap for Nickel Base Alloy ZEN-B

YAMAWA MFG

A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	21.37 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Hand Tap Series, V Coating Powder High Speed (High Hardness Steel), V-XPM-HT

OSG

Suitable for 42-52 HRC tempered steel (alloy steel, die steel, tool steel, etc.) tapping. Excellent Abrasion Resistant V Coating Has Been Applied to Maximize the Properties of the Base Material on the Surface

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	26.47 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Point Tap Series, HR Coating, for NI-Base Heat Resistant Alloys, WHR-NI-POT

OSG

In applying HR coating with high welding-resisting properties on nickel based alloys, it achieves a long operating life even on aging nickel based alloys (40-45 HRC)

Select to compare

Configure now
Starting from^∗ ：	28.34 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Spiral Tap Series, for Hard-to-Cut Materials, CPM-SFT

OSG

Workpiece material is suitable for blind hole drilling of about 20 ~ 35 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	11.72 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Taper Tap Series for Pipes for Difficult-to-Cut Materials CPM-TPT

OSG

Workpiece material is suitable for internal thread machining of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	29.98 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Groove-Free Tap Series VP New Roll Short Chamfer VP-SC-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	19.89 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Groove-Free Tap Series X Performer S-XPF

OSG

When working carbon steel and alloyed steel has fewer problems with cutting debris compared to cutting taps, allowing longer lasting machining. Particularly effective in working with automobile related cast steel parts
* M2.6 and below will be changed to constant powdered high strength steel (CPM). Please understand ahead of time.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	19.66 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap for Titanium Alloy ZET-B

YAMAWA MFG

A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	21.54 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported

Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 Pieces Per Package】

MISUMI

[Features]
-Multi-use tap for all materials from general steel, heat treated steel to stainless steel
-Efficient chip removal due to short thread form and special flute shape.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	52.89 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Spiral Tap Series, HR Coated, for Heat-Resistant Nickel-Based Superalloys, WHR-NI-SFT

OSG

Combining spiral tap with knurled flutes has brought in highly rigid edges. Assure long-lasting, stable machining of nickel-based alloy (40 - 45 HRC) processed under aging treatment.

Select to compare

Configure now
Starting from^∗ ：	22.41 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, V Coating Powder High-Speed Steel, VP-SFT

OSG

Optimal for machining pre-hardened steel alloys from 35 to 42 HRC.
Tool material: Powder metal high-speed steel
Thread type: Metric
Hole type: For blind holes
Material: General steel / heat-treated steel
Coating: Surface treatment for steel.

Select to compare

Configure now
Starting from^∗ ：	17.33 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, for Hard-to-Cut Materials, Long Shank, CPM-LT-SFT

OSG

Workpiece material is suitable for blind hole drilling of about 20 ~ 35 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	84.11 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Hand Tap Series, for Difficult-to-Machine Material, CPM-HT

OSG

Workpiece material is suitable for internal thread machining of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	11.08 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Point Tap Series, Long Shank for Difficult-To-Machine Material, CPM-LT-POT

OSG

Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	40.05 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Taper Tap Series for Pipes V Coating Powder HSS (For High Hardness Steel) V-XPM-TPT

OSG

Used for machining of pipe taper female threads, but is suitable for easy processing conditions

Select to compare

Configure now
Starting from^∗ ：	45.80 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Taper Tap Series for Pipes for Difficult-to-Cut Materials Short Screw CPM-S-TPT

OSG

Workpiece material is suitable for internal thread machining of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	44.76 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Taper Tap Series for Pipes Short Screws for Difficult-To-Cut Materials CPM-LT-S-TPT

OSG

Workpiece material is suitable for internal thread machining of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Select to compare

Configure now
Starting from^∗ ：	60.18 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series IT New Roll IT-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	19.82 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series UM New Roll UM-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	31.64 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Short Chamfer Torqueless Roll Taps SC-TL-RZ

YAMAWA MFG

The number of chamfer threads is just 1, creating a roll tap with specially shaped threading parts for achieving low torque use.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	35.71 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap for Titanium Alloy, for Through Hole ZET-P

YAMAWA MFG

A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	21.37 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Dry Processing Roll Tap OL+RZ / OL-RZ

YAMAWA MFG

It is a roll tap that's capable of tapping without lubrication for burred thin iron plates and steel with relatively short processing length at the size of M6 or less.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	27.00 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Tap with Nickel Base Alloy ZEN-P

YAMAWA MFG

A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	21.37 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

High Performance Roll Tap HP+ RZ / HP-RZ

YAMAWA MFG

It is suitable for processing steel materials (35 HRC or less) and light alloys, and can support high-speed machining (20-50 m/min)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	24.43 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SU Roll Tap SURZ

YAMAWA MFG

[Features]
· A special shape is adopted for the base of the tap pits that enables the female thread internal diameter shape to be controlled.
· The part of the tap that sticks out (protrudes) adopts a special shape that realizes low torque.
· Demonstrates effectiveness for roll tap machining of stainless steel.
· Adjusting the pilot hole diameter enables the female thread internal diameter shape to be adjusted.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	42.08 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	OSG	OSG	OSG	OSG	OSG	OSG	OSG	YAMAWA MFG	OSG	OSG	OSG	OSG	OSG	OSG	YAMAWA MFG	MISUMI	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG
Product Series	A Tap Series Point Tap Long Shank A-LT-POT	A Tap Series, Spiral Tap, A-SFT	A Tap Series, Spiral Tap, Long Shank A-LT-SFT	Groove-Free Tap Series VP New Roll VP-NRT	Groove-Free Tap Series VP New Roll Long Shank VP-LT-NRT	Point Tap Series, for Difficult-to-Machine Material, CPM-POT	A Tap Series for Pipes Point Tap A-POT	Spiral Tap for Nickel Base Alloy ZEN-B	Hand Tap Series, V Coating Powder High Speed (High Hardness Steel), V-XPM-HT	Point Tap Series, HR Coating, for NI-Base Heat Resistant Alloys, WHR-NI-POT	Spiral Tap Series, for Hard-to-Cut Materials, CPM-SFT	Taper Tap Series for Pipes for Difficult-to-Cut Materials CPM-TPT	Groove-Free Tap Series VP New Roll Short Chamfer VP-SC-NRT	Groove-Free Tap Series X Performer S-XPF	Spiral Tap for Titanium Alloy ZET-B	Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 Pieces Per Package】	Spiral Tap Series, HR Coated, for Heat-Resistant Nickel-Based Superalloys, WHR-NI-SFT	Spiral Tap Series, V Coating Powder High-Speed Steel, VP-SFT	Spiral Tap Series, for Hard-to-Cut Materials, Long Shank, CPM-LT-SFT	Hand Tap Series, for Difficult-to-Machine Material, CPM-HT	Point Tap Series, Long Shank for Difficult-To-Machine Material, CPM-LT-POT	Taper Tap Series for Pipes V Coating Powder HSS (For High Hardness Steel) V-XPM-TPT	Taper Tap Series for Pipes for Difficult-to-Cut Materials Short Screw CPM-S-TPT	Taper Tap Series for Pipes Short Screws for Difficult-To-Cut Materials CPM-LT-S-TPT	Groove-Free Tap Series IT New Roll IT-NRT	Groove-Free Tap Series UM New Roll UM-NRT	Short Chamfer Torqueless Roll Taps SC-TL-RZ	Spiral Tap for Titanium Alloy, for Through Hole ZET-P	Dry Processing Roll Tap OL+RZ / OL-RZ	Tap with Nickel Base Alloy ZEN-P	High Performance Roll Tap HP+ RZ / HP-RZ	SU Roll Tap SURZ
Starting from^∗	23.65 € *Unit price with basic configuration	16.04 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	24.50 € *Unit price with basic configuration	- Volume Discount	24.43 € *Unit price with basic configuration	9.49 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	15.94 € *Unit price with basic configuration Volume Discount	21.37 € *Unit price with basic configuration Volume Discount	26.47 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	28.34 € *Unit price with basic configuration	11.72 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	29.98 € *Unit price with basic configuration Volume Discount	19.89 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	19.66 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	21.54 € *Unit price with basic configuration Volume Discount	52.89 € *Unit price with basic configuration Volume Discount	22.41 € *Unit price with basic configuration	17.33 € *Unit price with basic configuration	84.11 € *Unit price with basic configuration Volume Discount	11.08 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	40.05 € *Unit price with basic configuration Volume Discount	45.80 € *Unit price with basic configuration	44.76 € *Unit price with basic configuration Volume Discount	60.18 € *Unit price with basic configuration	19.82 € *Unit price with basic configuration Volume Discount	31.64 € *Unit price with basic configuration Volume Discount	35.71 € *Unit price with basic configuration Volume Discount	21.37 € *Unit price with basic configuration Volume Discount	27.00 € *Unit price with basic configuration Volume Discount	21.37 € *Unit price with basic configuration Volume Discount	24.43 € *Unit price with basic configuration Volume Discount	42.08 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	6 Days	Same day	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	Same day	6 Days	Same day	6 Days	Same day	6 Days	6 Days	5 Days	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	8 Days
Screw Types	Meter	Meter / Unified	Meter	Meter / Unified	Meter / Unified	Meter	Meter / Unified	Meter	Meter	Meter	Meter	Taper for Pipe	Meter / Unified	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Taper for Pipe	Taper for Pipe	Taper for Pipe	Meter / Unified	Miniature	Meter	Meter	Meter / Unified	Meter	Unified	Unified
Screw size (Nominal)	M2 ～ M24	1/2-20UNF ～ M24	M2 ～ M24	M1 ～ M12	M1 ～ M12	M1.4 ～ M48	1/2-20UNF ～ M24	M3 ～ M12	M3 ～ M12	M8	M1.4 ～ M48	R1 ～ R3/8	M1 ～ No6UN	M3 ～ M45	M3 ～ M16	M2 ～ M12	M4 ～ M8	M3 ～ M12	M16	M3 ～ M48	M8 ～ M12	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	M1 ～ No4UN	S0.5 ～ S0.9	M2 ～ M6	M3 ～ M6	No.10-32UNF ～ M6	M3 ～ M12	No.2-56UNC ～ M10	No.4
Pitch (P), Number of Threading(mm)	0.25 ～ 3	0.25 ～ 3	0.25 ～ 3	0.25 ～ 56	0.25 ～ 56	0.3 ～ 5	0.25 ～ 3	0.5 ～ 1.75	0.5 ～ 1.75	1.25	0.3 ～ 5	11 ～ 28	0.25 ～ 56	0.5 ～ 4.5	0.5 ～ 2	0.4 ～ 1.75	0.7 ～ 1.25	0.5 ～ 1.75	2	0.5 ～ 5	1.25 ～ 1.75	11 ～ 28	11 ～ 19	11 ～ 28	0.25 ～ 56	.02 ～ 0.225	0.4 ～ 1	0.5 ～ 1	0.3 ～ 1	0.5 ～ 1.75	0.25 ～ 1.5	-
Chamfer threads (Lcf)	5P	1.5P ～ 2.5P	2.5P	2P ～ 4P	2P ～ 4P	5P	5P	3P	2.5P ～ 5P	5P	3P	2.5P	1P	2P ～ 4P	3P	2.5 P	2.5P	2.5P	3P	2P ～ 5P	5P	3P	2.5P	2.5P	2P	2P	1P	5P	4P	4.5P	2P ～ 4P	2P
Tool Material Type	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel
work material	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Nickel-based alloy (Inconel, etc.)[○]	Quenched and tempered steel (45 to 55 HRC)[◎]	Nickel-based alloy (Inconel, etc.)[◎]	High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]	Nickel-based alloy (Inconel, etc.)[◎]	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Quenched and tempered steel (45 to 55 HRC)[◎]	Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Stainless Steel (JIS-SUS)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]
Tap Type	Point tap	Spiral Tap	Spiral Tap	Roll tap	Roll tap	Point tap	Point tap	Spiral Tap	Hand Tap	Point tap	Spiral Tap	Tap for pipes	Roll tap	Roll tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Hand Tap	Point tap	Tap for pipes	Tap for pipes	Tap for pipes	Roll tap	Roll tap	Roll tap	Spiral Tap	Roll tap	Point tap	Roll tap	Roll tap
Hole type	For through hole	For blind hole	For blind hole	For blind hole	For blind hole	For through hole	For through hole	For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For through hole	For blind hole	For blind hole	For through hole / For blind hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For blind hole	For through hole	For through hole	For through hole	For through hole / For blind hole	For blind hole
Coating Y/N	Available	Available	Available	Available	Available	N/A	Available	N/A	Available	Available	N/A	N/A	Available	Available	N/A	N/A	Available	Available	N/A	N/A	N/A	Available	N/A	N/A	Available	Available	Available	N/A	Available	N/A	Available	Available
Coating Type	Other	Other	Other	TiCN	TiCN	Non-Coated	Other	-	TiCN	Other	Non-Coated	Non-Coated	TiCN	TiCN	-	-	Other	TiCN	Non-Coated	Non-Coated	Non-Coated	TiCN	Non-Coated	Non-Coated	TiCN	CrN	TiCN	-	TiCN	-	TiCN	Other
Overall Length (L)(mm)	80 ～ 200	34 ～ 120	80 ～ 200	30 ～ 82	60 ～ 200	34 ～ 185	34 ～ 120	46 ～ 82	46 ～ 82	70	34 ～ 185	55 ～ 95	30 ～ 62	46 ～ 220	46 ～ 95	40 ～ 82	52 ～ 70	46 ～ 82	150	46 ～ 185	150	59 ～ 109	62 ～ 95	120 ～ 150	30 ～ 46	30	42 ～ 62	46 ～ 62	36 ～ 62	46 ～ 82	36 ～ 75	-

Filter by:

Stock

- Show only stock items
Clear

Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Miniature
- Other
Clear

Screw size (Nominal)
CTG-22

CTG-16

No0UN

NO.0-80UNF

S0.1

NO.1-72UNF

NO.1-64UNC

NO.10-32UNF

No.10-32UNF

NO.10-24UNC

No.10-24UNC

NO.12-28UNF

NO.12-24UNC

S0.2

NO.2-64UNF

NO.2-56UNC

No.2-56UNC

S0.3

NO.3-56UNF

NO.3-48UNC

No.4

S0.4

NO.4-48UNF

NO.4-40UNC

No.4-40UNC

S0.5

NO.5-44UNF

NO.5-40UNC

No.5-40UNC

No.6

S0.6

NO.6-40UNF

No.6-32UNC

S0.7

S0.8

NO.8-36UNF

NO.8-32UNC

No.8-32UNC

S0.9

1UN

1UNS

G1

G 1"

M1

NPS1

NPT1

NPTF1

No1UN

PF1

PF 1

R1

Rp1

S1

UNC 1

UNC 1"

UNF 1"

W1

1´-11

1′-11

1-8UNC

1'-8UNC

G1"-3"

1"1/2UN

G1"1/2

NPS1"1/2

NPT1"1/2

R1"1/2

Rp1"1/2

W1"1/2

1′1/2-11

1 1/2-8UN

1"1/4UN

G1"1/4

NPS1"1/4

NPT1"1/4

R1"1/4

Rp1"1/4

W1"1/4

1 1/4-8UN

1"1/8UN

G1"1/8

R1"1/8

W1"1/8

1 1/8-8UN

1"1/16UN

1/2

1/2UN

G1/2

G 1/2

NPS1/2

NPT1/2

NPTF1/2

PF 1/2

R1/2

Rc1/2

Rp1/2

UNC 1/2

UNF 1/2

UNJF 1/2

W1/2

1/2-20UNF

1/2-14

1/2-13UNC

G1/2 5/8

1"3/4UN

G1"3/4

R1"3/4

Rp1"3/4

W1"3/4

1 3/4-8UN

1"3/8UN

G1"3/8

R1"3/8

W1"3/8

1 3/8-8UN

1/4

1/4UN

G1/4

G 1/4

NPS1/4

NPT1/4

NPTF1/4

PF1/4

PF 1/4

PT 1/4

R1/4

Rc1/4

Rp1/4

SM1/4

UNC 1/4

UNF 1/4

UNJF 1/4

W1/4

1/4-28UNF

1/4-20UNC

W1"5/8

1 5/8-8UN

W1"7/8

1 7/8-8UN

1/8

G1/8

G 1/8

NPS1/8

NPT1/8

NPTF1/8

PF1/8

PT 1/8

R1/8

Rc1/8

Rp1/8

SM1/8

W1/8

1/8-28

1/16

G1/16

NPS1/16

NPT1/16

R1/16

Rp1/16

M1.1

G 1.1/2

G 1.1/4

G 1.1/8

M1.2

S1.2

M1.4

S1.4

M1.6

M1.7

M1.8

2UN

G2

M2

M2.0

NPS2

NPT2

No2UN

R2

Rp2

UNC 2

UNF 2

W2

2-8UN

G2"1/2

R2"1/2

Rp2"1/2

W2"1/4

M2.2

M2.3

M2.5

M2.6

EGM 3

G3

M3

M3.0

No3UN

R3

Rp3

UNC 3

UNF 3

G3"1/2

R3"1/2

Rp3"1/2

3/4

3/4UN

G3/4

G 3/4

NPS3/4

NPT3/4

NPTF3/4

PF 3/4

R3/4

Rp3/4

UNC 3/4

UNF 3/4

W3/4

3/4-16UNF

3/4-14

3/4-10UNC

3/8UN

G3/8

G 3/8

NPS3/8

NPT3/8

NPTF3/8

PF3/8

PF 3/8

PT 3/8

R3/8

Rc3/8

Rp3/8

UNC 3/8

UNF 3/8

UNJF 3/8

W3/8

3/8-24UNF

3/8-19

3/8-16UNC

3/8W16

M3 - M10

M3～10

M3 - M12

SM3/16

W3/16

M3 - M18

SM3/32

M3.5

EGM 4

G4

M4

M4.0

MF4

No4UN

R4

Rp4

UNC 4

UNF 4

№4-40UNC

M4～6

M4.5

EGM 5

M5

M5.0

MF5

No5UN

UNC 5

№5-40UNC

5/8UN

G5/8

G 5/8

R5/8

UNC 5/8

UNF 5/8

W5/8

5/8-18UNF

5/8-11UNC

G5/8 3/4

M5 - M12

5/16UN

UNC 5/16

UNF 5/16

UNJF 5/16

W5/16

5/16-24UNF

5/16-18UNC

5/16W18

W5/32

M5.5

EGM 6

M6

M6.0

MF6

No6UN

UNC 6

UNF 6

UNJC 6

№6-32UNC

M7

MF7

PG7

7 execution M3 - M12

7/8UN

G7/8

G 7/8

R7/8

UNC 7/8

UNF 7/8

W7/8

7/8-14UNF

7/8-9UNC

7/16UN

UNC 7/16

UNF 7/16

UNJF 7/16

7/16-20UNF

7/16-14UNC

SM7/32

EGM 8

M8

MF8

No8UN

UNC 8

UNF 8

UNJC 8

№8-32UNC

M9

PG9

9/16

9/16UN

UNC 9/16

UNF 9/16

9/16-18UNF

9/16-12UNC

SM9/32

SM9/64

EGM 10

M10

MF10

No10UN

UNC10

UNC 10

UNF 10

UNJF 10

№10-32UNF

№10-24UNC

M10～25

M11

SM11/32

SM11/64

EGM 12

M12

MF12

Mf12

No12UN

UNC 12

UNF 12

M12 x 1.5

M13

PG13.5

M14

MF14

M15

SM15/64

M16

MF16

Mf16

M16 x 1.5

M17

M18

MF18

M19

M20

MF20

Mf20

M20 x 1.5

M21

M22

MF22

M23

M24

MF24

M25

MF25

Mf25

M25 x 1.5

M26

MF26

M27

MF27

M28

MF28

M30

MF30

M32

Mf32

M33

M34

M35

M36

M37

M38

M39

M40

M42

M45

M48

M52

M56

M64
Clear

Pitch (P), Number of Threading(mm)
.02

0.025

0.05

0.08

0.1

0.125

0.15

0.175

0.2

0.225

0.25

0.3

0.35

0.4

0.45

0.5

0.6

0.7

0.75

0.8

0.9

1

1.1

1.25

1.4

1.5

1.75

1.9

2

2.5

2.8

3

3.5

4

4.5

5

5.5

6

7

8

9

10

11

11.5

12

13

14

16

18

19

20

24

27

28

32

36

40

44

48

56

64

72

80
Clear

Chamfer threads (Lcf)
1P

1.5-Shaped

1.5 P

1.5P

2 P

2P

2.5

2.5 P

2.5P

3 P

3P

4 P

4P

4.5P

5

5 P

5P

6P

8P

9 P

9P

24P
Drawing

Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Alloy HSS
- Vanadium High-Speed Steel
- JIS-SKS
Details

Clear

work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
Clear

Tap Type
- Spiral Tap
- Point tap
- Roll tap
- Hand Tap
- Tap for pipes
- Thread cutter
- Thread-Cutting-Related Tool
- Die
- Tap wrench
- Modification/removal Tool
- Oil Hole Tap
Clear

Hole type
- For through hole
- For blind hole
Clear

Coating Y/N
- Available
- N/A
Clear

Coating Type
- For High Hardness (Silicon Group)
- TiAlN
- TiCN
- TiN
- DLC
- CrN
- Non-Coated
- Nitriding Treatment
- Other
Details

Clear

Overall Length (L)(mm)
16

30

32

33

34

35

36

38

39

40

41

42

44

44.5

45

46

47.62

47.625

48

49.21

50

50.8

51

52

53

53.975

53.98

54

55

55.28

55.64

55.92

56

57

58

59

59.5

60

60.32

60.325

61

62

62.52

62.65

63

63.5

64

65

66

67

68

69

69.06

69.063

69.42

69.71

70

72

73

74

74.61

74.625

75

76

78

79

79.03

79.31

80

80.17

82

83

84

85

85.72

87

88

89

89.12

89.18

90

91

91.28

92

95

96

96.84

98.97

99.21

100

101

102

104

105

108

109

109.65

110

111

112

113.5

115

118

119

120

121

125

130

130.175

130.2

135

136

140

145

150

155

160

163

165

170

175

180

185

190

195

200

205

210

220

224

225

250

300

310

315

460
Drawing

Clear

Brand

- MISUMI (1)
- Cost Efficient Products ()
- OSG (23)
- YAMAWA MFG (8)
- NS TOOL (0)
- BERNSTEIN AG (0)
- KANETEC (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- STAHLWILLE (0)
- RUKO (0)
- TANOI MFG (0)
- BAHCO (0)
- ENGINEER (0)
- LIGHTSEIKI (0)
- SKC (0)
- CARMEX (0)
- NACHI(FUJIKOSHI) (0)
- HAZET (0)
- ISHIHASHI (0)
- TRUSCO NAKAYAMA (0)
- SANDVIK (0)
- WERA (0)
- WIHA (0)
- FEIN (0)
- EIKOSHA (0)
- RENNSTEIG (0)
- GUHRING (0)
- GEDORE (0)
- ESCO (0)
- REX TOOLS (0)
- NOGAJAPAN (0)
Clear