Warunki filtrowania

Wyczyść wszystko

Screw Types
- Other
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
- 0.025
Tool Material Type
- Carbide
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
Tap Type
- Thread cutter
Coating Y/N
- Available
Coating Type
- TiAlN
Overall Length (L)(mm)
- 45
Producent
- NS TOOL (1)

Screw-Hole-Related Tools (Screw size (Nominal): S0.1)

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.

Liczba pozycji: 1

* Informacje o dniach wysyłki, kosztach wysyłki i cenach.

Lista

Zdjęcie

Porównaj specyfikacje

Liczba pozycji do wyświetlenia:Sortuj według:

Data wysyłki:

Volume Discount

NS TOOL

MMTS Micro Threading Tool

Helical threaded with a smaller tool diameter than that of pilot holes, so removal and re-processing is possible when broken

Czytaj dalej

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Other	S0.1	0.025	-	Carbide	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Thread cutter	-	Available

Cena standardowa (bez VAT):

245.31 €

Standardowa data wysyłki:

6 dni robocze

Konfiguruj

Screw-Hole-Related Tools (Screw size (Nominal): S0.1)

Kategorie związane z Screw-Hole-Related Tools