Screw-Hole-Related Tools（Screw size (Nominal)：M2.5 Page 2）
Search by sub-category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Tap Wrenches
Modification/Removal Tools
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Hand Tap Series, Tin Coated, TIN-HT
OSG
Excellent cutting edge strength makes it suitable for high hardness material machining without chipping.- Volume Discount
Configure nowStarting from∗ ： 18.86 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Point Tap Series, Tin Coated, TIN-POT
OSG
Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel- Volume Discount
Configure nowStarting from∗ ： 19.86 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Point Tap Series For Stainless Steel Use EX-SUS-POT
OSG
Offers superb sharpness and durability. Can be used to drill holes in difficult-to-cut stainless steel.- Volume Discount
Configure nowStarting from∗ ： 11.91 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Point Tap Series, General Homo Treatment, EX-H-POT
OSG
Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap- Volume Discount
Configure nowStarting from∗ ： 10.94 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
- Promotional pricing
Point Tap Series, General Long Shank, EX-LT-POT
OSG
Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap- Volume Discount
Configure nowStarting from∗ ： 20.22 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Point Tap Series, for Deep Holes, EX-DH-POT
OSG
Suitable for through holes with extra long threads and materials that easily suffer sticking.- Volume Discount
Configure nowStarting from∗ ： 14.28 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Point Tap Series, for Thin Plates, EX-SS-POT
OSG
Well suited for thread cutting of soft steel sheets with a pull strength of 700N or below. Achieves Beautiful Finishing Surfaces by Preventing Whiskers, Burrs, and Tears on Punched Holes and Buring Holes- Volume Discount
Configure nowStarting from∗ ： 10.10 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Groove-Free Tap Series IT New Roll IT-NRT
OSG
Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.- Volume Discount
Configure nowStarting from∗ ： 20.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Seamless TAFLET
TANOI MFG
Rise tap with a correct bite without pitch or angle errors.- Volume Discount
Configure nowStarting from∗ ： 62.26 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Round Adjustable Die
SKC
[Features]
Adjustable screw thread (die) used when machining external threads.- Volume Discount
Configure nowStarting from∗ ： 20.33 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Point Tap for Through Holes 1015
GUHRING
[Features]
· JIS standard compliant tap for through holes.
· Supports a wide range of work materials from general steel to stainless steel.- Volume Discount
Configure nowStarting from∗ ： 29.37 € Min. Shipping Days ： 24 Days *Unit price with basic configuration
-
Rolling Tap 1017
GUHRING
[Features]
· Rolling tap suitable for steel with ductility or non-ferrous metal such as aluminum or copper.- Volume Discount
Configure nowStarting from∗ ： 29.15 € Min. Shipping Days ： 24 Days *Unit price with basic configuration
-
Short Chamfer Torqueless Roll Taps SC-TL-RZ
YAMAWA MFG
The number of chamfer threads is just 1, creating a roll tap with specially shaped threading parts for achieving low torque use.- Volume Discount
Configure nowStarting from∗ ： 33.47 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
- Promotional pricing
Spiral Tap for Stainless Steel SU+SP / SU-SP
YAMAWA MFG
Spiral tap for blind hole machining with extremely viscous or work-hardened work material.
[Features]
· For blind hole machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.
· Optimal design of the screw part reduces the machining burden on each blade bite, reducing the cutting resistance and increasing tool life.
· Stable scrap is ejected and a good finish is realized.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 10 m/min or less is recommended.
[Applications]
Optimal for machining extremely viscous or work-hardened work material.- Volume Discount
Configure nowStarting from∗ ： 16.90 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Stainless Steel Point Tap SU+PO / SU-PO
YAMAWA MFG
Point tap for through-hole machining with extremely viscous or work-hardened work material.
[Features]
Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 10 m/min or less is recommended.
[Applications]
· Ideal for machining through-holes with chrome steel, molybdenum steel, and stainless steel.- Volume Discount
Configure nowStarting from∗ ： 16.90 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Titanium Coating Roll Tap R+V / R-V
YAMAWA MFG
A coating roll tap suitable for threading steel and nonferrous materials.- Volume Discount
Configure nowStarting from∗ ： 26.75 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Dry Processing Roll Tap OL+RZ / OL-RZ
YAMAWA MFG
It is a roll tap that's capable of tapping without lubrication for burred thin iron plates and steel with relatively short processing length at the size of M6 or less.- Volume Discount
Configure nowStarting from∗ ： 29.68 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Coating Spiral Tap AU+ SP
YAMAWA MFG
Coating spiral tap with blind holes has a screw part that leaves behind complete threads and its special form sweeps away half of the screw threads afterwards + unique groove form helps maintain the discharge of scraps and has achieved in reducing friction.- Volume Discount
Configure nowStarting from∗ ： 25.52 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 149.12 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
- Promotional pricing
Point Tap For High Carbon Steel HC+PO / HC-PO
YAMAWA MFG
It is suitable for tapping high carbon steel such as S55C.- Volume Discount
Configure nowStarting from∗ ： 14.66 € Special price Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Auto High-Speed Steel Die for Stainless Steel For Automatic Lathes HS-D
YAMAWA MFG
Solid die for difficult-to-cut materials, such as stainless steel, etc.
[Features]
· Adopts high-speed tool steel (HSS).
· Can be used only from the surface as oxide treatment (OX treatment) is applied as the surface treatment.
· The outer diameter of the die is made smaller and thinner for less rotational vibration during high speed cutting with automatic lathes.
· Stable male threading can be performed.
· Solid type with minimal variation even under harsh cutting condition specifications.
[Applications]
· Optimal for machining stainless steel and other difficult-to-cut materials.- Volume Discount
Configure nowStarting from∗ ： 84.41 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Short Spiral Tap for Deep Holes S-SP
YAMAWA MFG
Spiral tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
[Features]
· Low frictional resistance and good supply of cutting oil are effective for deep thread machining to 2.5 times the nominal diameter or more.
· Oxide treatment (OX treatment) applied to prevent welding.
[Applications]
· Optimal for deep thread machining to 2.5 times the nominal diameter or more.- Volume Discount
Configure nowStarting from∗ ： 21.06 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Short Point Tap for Deep Holes S-PO
YAMAWA MFG
A tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
[Features]
· Short thread length gives low frictional resistance.
· Good supply of cutting oil is effective for deep thread machining to 2.5 times the nominal diameter or more.
· Oxide treatment (OX treatment) applied to prevent welding.
[Applications]
· Optimal for deep thread machining to 2.5 times the nominal diameter or more.- Volume Discount
Configure nowStarting from∗ ： 21.06 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Pilot Hole Check Pins for Cutting (Straight Type) CPC-S
YAMAWA MFG
5-piece set that can be used to check several types of pilot holes and pilot hole depth. High-speed tool steel is used out of consideration for abrasion resistance. Can be used for both through-holes and blind-holes.- Volume Discount
Configure nowStarting from∗ ： 26.80 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
- Promotional pricing
Hole Check Pin for Cutting (Straight Type) CPC-T
YAMAWA MFG
Can perform a simple check of the pilot hole diameter with a single piece. Uses high speed tool steel designed with wear resistance in mind. Can use either through-holes or blind holes with an allowance.- Volume Discount
Configure nowStarting from∗ ： 17.48 € Special price Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Carbide Hand Tap for Light Alloys N-CT LA
YAMAWA MFG
A carbide tap suitable for thread cutting with aluminum casting (AC), aluminum die castings (ADC), zinc die castings (ZDC), etc.Configure nowStarting from∗ ： 134.39 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 86.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
A Tap Series Point Tap Long Shank A-LT-POT
OSG
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.Configure nowStarting from∗ ： 37.38 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SG Point Tap SGPO
NACHI(FUJIKOSHI)
[Features]
・ A tap for through-holes, supporting various cutting speeds, machinery, and work materials.Configure nowStarting from∗ ： 38.69 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 14.89 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Screw Types |
| Screw size (Nominal) |
| Pitch (P), Number of Threading(mm) |
| Chamfer threads (Lcf) |
| Tool Material Type |
| work material |
| Tap Type |
| Hole type |
| Coating Y/N |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | TANOI MFG | SKC | GUHRING | GUHRING | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | OSG | OSG | NACHI(FUJIKOSHI) | REX TOOLS |
| Product Series | Auto High-Speed Steel Die for Stainless Steel For Automatic Lathes HS-D | Screw Cutting Round Die Series, General Round Dies for Screw Cutting, RD-H | ||||||||||||||||||||||||||||
| Starting from∗ | 18.86 € *Unit price with basic configuration Volume Discount | 19.86 € *Unit price with basic configuration Volume Discount | 11.91 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 10.94 € *Unit price with basic configuration Volume Discount | 20.22 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 14.28 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 10.10 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 20.73 € *Unit price with basic configuration Volume Discount | 62.26 € *Unit price with basic configuration | 20.33 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 29.37 € *Unit price with basic configuration Volume Discount | 29.15 € *Unit price with basic configuration Volume Discount | 33.47 € *Unit price with basic configuration Volume Discount | 16.90 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 16.90 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 26.75 € *Unit price with basic configuration Volume Discount | 29.68 € *Unit price with basic configuration Volume Discount | 25.52 € *Unit price with basic configuration Volume Discount | 149.12 € *Unit price with basic configuration | 14.66 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 84.41 € *Unit price with basic configuration Volume Discount | 21.06 € *Unit price with basic configuration Volume Discount | 21.06 € *Unit price with basic configuration Volume Discount | 26.80 € *Unit price with basic configuration Volume Discount | 17.48 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 134.39 € *Unit price with basic configuration | 86.20 € *Unit price with basic configuration Volume Discount | 37.38 € *Unit price with basic configuration | 38.69 € *Unit price with basic configuration | 14.89 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 8 Days | 6 Days | 6 Days | 8 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | Same day | 24 Days | 24 Days | 8 Days | 6 Days | 6 Days | 8 Days | 8 Days | 8 Days | 9 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 6 Days | 6 Days | 6 Days | 3 Days |
| Screw Types | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | - |
| Screw size (Nominal) | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 |
| Pitch (P), Number of Threading(mm) | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.35 ～ 0.45 | 0.45 | 0.35 ～ 0.45 | 0.45 | 0.45 | - | - | 0.45 | 0.45 | 0.35 ～ 0.45 | 0.35 ～ 0.45 | - |
| Chamfer threads (Lcf) | 1.5P ～ 5P | 5P | 4P | 5P | 5P | 4P | 5P | 2P | 2P | - | - | - | 1P | 2.5P | 5P | 2P ～ 4P | 4P | 2.5P | - | 5P | - | 2.5P | 5P | - | - | 1.5P ～ 3P | - | 5P | 5 | - |
| Tool Material Type | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | High-speed steel | - | High-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Carbide | High-speed steel | Powder high-speed steel | High-speed steel | - |
| work material | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○/◎] / Stainless Steel (JIS-SUS)[○/◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | - | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○] | - | - | Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | - |
| Tap Type | Hand Tap | Point tap | Point tap | Point tap | Point tap | Point tap | Point tap | Roll tap | Roll tap | Die | Point tap | Roll tap | Roll tap | Spiral Tap | Point tap | Roll tap | Roll tap | Spiral Tap | Die | Point tap | Die | Spiral Tap | Point tap | Thread-Cutting-Related Tool | Thread-Cutting-Related Tool | Hand Tap | Die | Point tap | Point tap | - |
| Hole type | For through hole / For blind hole | For through hole | For through hole | For through hole | For through hole | For through hole | For through hole | For blind hole | - | - | For through hole | - | For blind hole | For blind hole | For through hole | For through hole / For blind hole | For through hole | For blind hole | - | For through hole | - | For blind hole | For through hole | - | - | For through hole / For blind hole | - | For through hole | For through hole | - |
| Coating Y/N | Available | Available | N/A | N/A | N/A | N/A | N/A | Available | Available | - | Available | Available | Available | N/A | N/A | Available | Available | Available | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | Available | Available | - |
| Coating Type | TiN | TiN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiCN | TiCN | - | TiN | TiN | TiCN | - | - | TiN | TiCN | TiN | - | - | - | - | - | - | - | - | Non-Coated | Other | TiCN | - |
| Overall Length (L)(mm) | 44 | 44 | 44 | 44 | 80 ～ 100 | 44 | 44 | 44 | 44 | - | 44 | 44 | 46 | 46 | 46 | 46 | 46 | 46 | - | 46 | - | 46 | 46 | 45 | 46 | 44 | - | 80 | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No0UN
- NO.0-80UNF
- No.0-80UNF
- No.10
- S0.1
- NO.1-72UNF
- No.1-72UNF
- NO.1-64UNC
- No.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12-32UNEF
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- No.4
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- No.6
- S0.6
- NO.6-40UNF
- No.6-40UNF
- No.6-32UNC
- S0.7
- No.8
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- S0.9
- 1"
- 1UN
- 1UNS
- G1
- G 1"
- M1
- NPS1
- NPT1
- NPTF1
- No1UN
- PF1
- PF 1
- PT 1
- R1
- Rp1
- S1
- UNC 1
- UNC 1"
- UNF 1"
- W1
- 1´-20UNEF
- 1´-14UNS
- 1'-12UNF
- 1´-12UNF
- 1´-11
- 1′-11
- 1-8UNC
- 1'-8UNC
- 1´-8UNC
- G1"-3"
- 1"1/2UN
- 1"1/2
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1´1/2-11
- 1′1/2-11
- 1 1/2-8UN
- 1"1/4UN
- 1"1/4
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1´1/4-11
- 1′1/4-11
- 1 1/4-8UN
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1 1/8-8UN
- 1´ 1/8-7UNC
- 1"1/16UN
- 1/2
- 1/2UN
- G1/2
- G 1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF 1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC 1/2
- UNF 1/2
- UNJF 1/2
- W1/2
- 1/2-28UNEF
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- G1/2 5/8
- 1/2W12
- 1 3/4
- 1"3/4UN
- G1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1′3/4-11
- 1 3/4-8UN
- 1 3/8
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- G1/4
- G 1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PS 1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC 1/4
- UNF 1/4
- UNJF 1/4
- W1/4
- 1/4-32UNEF
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4W20
- W1"5/8
- 1 5/8-8UN
- W1"7/8
- 1 7/8-8UN
- 1'W8
- 1/8
- G1/8
- G 1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8SM40
- 1/8SM44
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- 1/16-28
- 1/16SM80
- M1.1
- G 1.1/2
- G 1.1/4
- G 1.1/8
- M1.2
- S1.2
- M1.4
- S1.4
- M1.6
- M1.7
- M1.8
- 2"
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- No2UN
- R2
- Rp2
- UNC 2
- UNF 2
- W2
- 2´-11
- 2′-11
- 2-8UN
- G2"1/2
- R2"1/2
- Rp2"1/2
- 2′1/2-11
- W2"1/4
- M2.2
- M2.3
- M2.5
- M2.6
- 3M
- EGM 3
- G3
- M3
- M3.0
- No3UN
- R3
- Rp3
- STI M3
- UNC 3
- UNF 3
- 3′-11
- G3"1/2
- R3"1/2
- Rp3"1/2
- 3/4
- 3/4UN
- G3/4
- G 3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF 3/4
- R3/4
- Rp3/4
- UNC 3/4
- UNF 3/4
- W3/4
- 3/4-20UNEF
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- 3/8
- 3/8UN
- G3/8
- G 3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC 3/8
- UNF 3/8
- UNJF 3/8
- W3/8
- 3/8-32UNEF
- 3/8-24UNF
- 3/8-19
- 3/8-16UNC
- 3/8W16
- M3 - M10
- M3～10
- M3 - M12
- SM3/16
- W3/16
- 3/16SM24
- 3/16W24
- 3/16SM28
- 3/16SM32
- 3/16SM40
- M3 - M18
- SM3/32
- 3/32SM56
- 3/32SM100
- 3.5
- M3.5
- 4
- 4M
- EGM 4
- G4
- M4
- M4.0
- MF4
- No4UN
- R4
- Rp4
- STI M4
- UNC 4
- UNF 4
- №4-40UNC
- M4～6
- M4.5
- 5M
- EGM 5
- M5
- M5.0
- MF5
- No5UN
- STI M5
- UNC 5
- №5-40UNC
- 5/8
- 5/8UN
- G5/8
- G 5/8
- NPS5/8
- R5/8
- UNC 5/8
- UNF 5/8
- W5/8
- 5/8-24UNEF
- 5/8-18UNF
- 5/8-11UNC
- G5/8 3/4
- 5/8W11
- M5 - M12
- M5～13
- 5/16
- 5/16UN
- UNC 5/16
- UNF 5/16
- UNJF 5/16
- W5/16
- 5/16-32UNEF
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- W5/32
- 5/64SM64
- 5.5M
- M5.5
- 6
- EGM 6
- M6
- M6.0
- MF6
- No6UN
- STI M6
- UNC 6
- UNF 6
- UNJC 6
- No6-40UNF
- №6-32UNC
- M7
- MF7
- PG7
- 7 execution M3 - M12
- 7/8
- 7/8UN
- G7/8
- G 7/8
- NPS7/8
- R7/8
- UNC 7/8
- UNF 7/8
- W7/8
- 7/8-20UNEF
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- UNC 7/16
- UNF 7/16
- UNJF 7/16
- W7/16
- 7/16-28UNEF
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- SM7/32
- 7.5
- M7.5
- EGM 8
- M8
- MF8
- No8UN
- STI M8
- Tr8
- UNC 8
- UNF 8
- UNJC 8
- №8-32UNC
- 9
- M9
- PG9
- 9/16
- 9/16UN
- UNC 9/16
- UNF 9/16
- 9/16-18UNF
- 9/16-12UNC
- 9/16W12
- SM9/32
- SM9/64
- 9/64SM40
- M9.5
- EGM 10
- M10
- MF10
- No10UN
- STI M10
- Tr10
- Tr 10
- UNC10
- UNC 10
- UNF 10
- UNJF 10
- №10-32UNF
- №10-24UNC
- M10～25
- M11
- PG11
- SM11/32
- SM11/64
- 11/64SM40
- EGM 12
- M12
- MF12
- Mf12
- No12UN
- STI M12
- Tr12
- Tr 12
- UNC 12
- UNF 12
- M12 x 1.5
- M13
- PG13.5
- M14
- MF14
- Tr 14
- M15
- SM15/64
- 15/64SM28
- M16
- MF16
- Mf16
- PG16
- Tr16
- Tr 16
- M16 x 1.5
- M17
- M18
- MF18
- Tr18
- Tr 18
- M19
- M20
- MF20
- Mf20
- Tr 20
- M20 x 1.5
- M21
- PG21
- M22
- M22X
- MF22
- Tr 22
- M23
- M24
- M24X
- MF24
- Tr 24
- M25
- M25X
- MF25
- Mf25
- Tr 25
- M25 x 1.5
- M26
- MF26
- Tr 26
- M27
- MF27
- M28
- MF28
- Tr 28
- PG29
- M30
- MF30
- Tr 30
- M32
- Mf32
- M33
- M34
- M35
- M36
- PG36
- M37
- M38
- M39
- M40
- M42
- PG42
- M44
- M45
- M46
- M48
- M50
- M52
- M56
- M64
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Pitch (P), Number of Threading(mm)
-
Chamfer threads (Lcf)
-
Tool Material Type
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Tap Type
-
Hole type
-
Coating Y/N
-
Coating Type
-
Overall Length (L)(mm)
Brand
-
- OSG (31)
- YAMAWA MFG (22)
- NACHI(FUJIKOSHI) (5)
- SANDVIK (4)
- GUHRING (3)
- TANOI MFG (3)
- REX TOOLS (1)
- SKC (1)
- NS TOOL (0)
- BERNSTEIN AG (0)
- KANETEC (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- STAHLWILLE (0)
- H & H (0)
- RUKO (0)
- WALTER PROTOTYP (0)
- BAHCO (0)
- ENGINEER (0)
- LIGHTSEIKI (0)
- CARMEX (0)
- HAZET (0)
- TRUSCO NAKAYAMA (0)
- WERA (0)
- WIHA (0)
- FEIN (0)
- EIKOSHA (0)
- ISHIHASHI (0)
- RENNSTEIG (0)
- GEDORE (0)
- ESCO (0)
- NOGAJAPAN (0)
CAD data type
-
- 2D
- 3D
Categories related to Screw-Hole-Related Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
Metody płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.