Screw-Hole-Related Tools（Screw size (Nominal)：M2.5）
Search by sub-category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Tap Wrenches
Modification/Removal Tools
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
SG Spiral Tap SGSP
NACHI(FUJIKOSHI)
[Features]
-Demonstrates excellent performance in a variety of materials, machining equipment and a wide range of cutting conditions.Configure nowStarting from∗ ： 39.34 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Spiral Tap Series, General Purpose EX-SFT
OSG
Suited for drilling blind holes in materials that leave coil shaped connected cutting debris such as carbon steel, alloyed steel, and non-ferrous metals.- Volume Discount
- Stock
Configure nowStarting from∗ ： 10.61 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
A Tap Series, Spiral Tap, A-SFT
OSG
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.- Volume Discount
Configure nowStarting from∗ ： 20.16 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, General Purpose, Long Shank EX-LT-SFT
OSG
Used in cases such as insufficient protruding length of the threaded portion of the standard spiral tap- Volume Discount
Configure nowStarting from∗ ： 21.26 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Groove-Free Tap Series X Performer S-XPF
OSG
When working carbon steel and alloyed steel has fewer problems with cutting debris compared to cutting taps, allowing longer lasting machining. Particularly effective in working with automobile related cast steel parts
* M2.6 and below will be changed to constant powdered high strength steel (CPM). Please understand ahead of time.- Volume Discount
Configure nowStarting from∗ ： 20.42 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Configure nowStarting from∗ ： 35.68 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spiral Tap Series, for Stainless EX-SUS-SFT
OSG
Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.- Volume Discount
Configure nowStarting from∗ ： 12.45 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Hand Tap HT (Cutting Tap)
YAMAWA MFG
Hand tap used for general tapping work.
[Features]
・ High blade tip strength makes it easy for regrinding.
・ More suitable for manual work compared to taps of other shapes.
・ 2 types are available, with 5P or 1.5P chamfered threads.
・ When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.
・ Machining with mechanical machinery is also possible.
・ Has straight grooves out of consideration for cutting chip stow.
・ Suitable for work materials whose cutting chips are powder or small coiled close to the powder.
[Applications]
・ Ideal for threading SPC/SPH and other thin plates or SS400/S20 or below mild steel.- Volume Discount
- Stock
Configure nowStarting from∗ ： 9.81 € Special price Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Carbide Tap for Ultra High Hardness Steel UH-CT
YAMAWA MFG
[SKD material] [Prehardened] Ideal for tapping 55 to 60 HRC (Max: 63 HRC). The machined length of the screw is 1.5 D or less, and the biting length is 5 threads for long life. We recommend using the maximum value 6H female thread bore for the pilot hole diameter.Configure nowStarting from∗ ： 130.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 173.31 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Hand Tap Series, Super Hard Hand Tap, OTT
OSG
Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass castings and other workpieces with high precision automatic machine.Configure nowStarting from∗ ： 69.71 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
A Tap Series for Pipes Point Tap A-POT
OSG
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.- Volume Discount
Configure nowStarting from∗ ： 19.86 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, Tin Coated, TIN-SFT
OSG
The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.- Volume Discount
Configure nowStarting from∗ ： 20.16 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Point Tap Series, for General, EX-POT
OSG
Suited for materials that leave coil shaped connected cutting dust that is in general use such as carbon steel, alloyed steel, and non-ferrous metals. Reliably Pushes Cutting Debris Forward Removing Concerns of Debris Interference- Volume Discount
Configure nowStarting from∗ ： 10.31 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Groove-Free Tap Series, Tin Coated, TIN-NRT
OSG
Suitable for both steel and non-ferrous alloys. Capable of high-speed cutting and efficient tapping; offer drastically improved durability.- Volume Discount
Configure nowStarting from∗ ： 18.62 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Min. Shipping Days ： 5 Days -
TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads
MISUMI
The left-flute left-rotary cutting that's achieved by the original geometry and coating allow the milling threading of high hardness steel of up to HRC62.- Volume Discount
Configure nowStarting from∗ ： 222.23 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Spiral Tap Series, for Stainless Steel / Deep Holes SUS-DH-SFT
OSG
Ideal for deep hole drilling of stainless steel beyond 2D.
Working material: Stainless steel / copper / resin
Coating: Surface treatment, steam oxide treatment.- Volume Discount
Configure nowStarting from∗ ： 14.35 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Point Tap Series, for Difficult-to-Machine Material, CPM-POT
OSG
Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging- Volume Discount
Configure nowStarting from∗ ： 14.46 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Groove-Free Tap Series VP New Roll Long Shank VP-LT-NRT
OSG
Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.Configure nowStarting from∗ ： 27.23 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
High Performance Roll Tap HP+ RZ / HP-RZ
YAMAWA MFG
It is suitable for processing steel materials (35 HRC or less) and light alloys, and can support high-speed machining (20-50 m/min)- Volume Discount
Configure nowStarting from∗ ： 29.61 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 26.58 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MT Series High-Speed Steel Point Tap
MISUMI
[New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping.
[Slide Discount] Great deals are available on the purchase of more than 5 pieces.- Volume Discount
Configure nowStarting from∗ ： 11.89 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Spiral Tap Series, for Hard-to-Cut Materials, CPM-SFT
OSG
Workpiece material is suitable for blind hole drilling of about 20 ~ 35 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging- Volume Discount
Configure nowStarting from∗ ： 16.46 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Point Tap Series For Stainless Steel Use EX-SUS-POT
OSG
Offers superb sharpness and durability. Can be used to drill holes in difficult-to-cut stainless steel.- Volume Discount
Configure nowStarting from∗ ： 11.91 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Groove-Free Tap Series VP New Roll VP-NRT
OSG
Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.- Volume Discount
Configure nowStarting from∗ ： 19.86 € Min. Shipping Days ： 15 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Groove-Free Tap Series VP New Roll Short Chamfer VP-SC-NRT
OSG
Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.- Volume Discount
Configure nowStarting from∗ ： 21.06 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
IT-Toughlet C Coated
TANOI MFG
Rise tap with a correct bite without pitch or angle errors.- Volume Discount
Configure nowStarting from∗ ： 41.36 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Seamless TAFLET
TANOI MFG
Rise tap with a correct bite without pitch or angle errors.- Volume Discount
Configure nowStarting from∗ ： 62.26 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap for Blind Hole 1013
GUHRING
[Features]
· JIS standard compliant tap for blind holes.
· Supports a wide range of work materials from general steel to stainless steel.- Volume Discount
Configure nowStarting from∗ ： 30.10 € Min. Shipping Days ： 24 Days *Unit price with basic configuration
-
Spiral Tap for Aluminum AL+SP / AL-SP
YAMAWA MFG
A tap that enables high speed, stable machining of light alloys such as aluminum die casting or forged aluminum.
[Features]
· Optimal blade design limits the internal diameter burrs that tend to appear when cutting threads into light alloy.
· Stable, clean thread machining can be performed.
[Applications]
· Stable thread machining of light alloy such as aluminum die casting or forged aluminum at high speed.
· Can be used not only with aluminum, but also other materials such as brass, bronze, magnesium castings, and zinc alloy castings.- Volume Discount
Configure nowStarting from∗ ： 16.90 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Hand Tap for Left-Hand Threads HT(LH)
YAMAWA MFG
It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.- Volume Discount
Configure nowStarting from∗ ： 21.74 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Plus Series Spiral Tap +SP (N+SP)
YAMAWA MFG
A spiral tap suitable for medium- to high-speed machining with machining centers, etc.
[Features]
· Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.
[Applications]
· Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).- Volume Discount
Configure nowStarting from∗ ： 14.72 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Carbide Hand Tap for Light Alloys N-CT LA
YAMAWA MFG
A carbide tap suitable for thread cutting with aluminum casting (AC), aluminum die castings (ADC), zinc die castings (ZDC), etc.Configure nowStarting from∗ ： 134.39 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Carbide Hand Tap for Cast Iron N-CT FC
YAMAWA MFG
A carbide tap suitable for thread machining of hard and brittle material such as cast iron.Configure nowStarting from∗ ： 134.39 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Solid Die D for Metric Threads
YAMAWA MFG
Solid die with improved die runout precision.
[Features]
· High-speed tool steel (HSS) is adopted, realizing stable machining.
· The front surface is the surface with a marking on the chamfering.
· The machining reference surface at the rear is set so that the end face makes close contact when the holder is attached.
· Screw adjustments are not required and die outer diameter precision is improved compared to adjustable dies as this is a solid die.
· Solves problems particular to adjustable type dies, realizing high precision screw machining.
[Applications]
· Convenient for cutting male threads on various work materials, whether hand turned or used with machinery.
· Combining with NC tooling enables machining with a MC.- Volume Discount
Configure nowStarting from∗ ： 52.80 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 24.88 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads
MISUMI
[Features]
-Thread cutting with small diameters from M1.4 × 0.3 (pilot hole diameter ø1.1 mm) is possible
-Reduced cutting load due to short flute length (3 webs)
-Enables effective thread cutting right into the corners of blind holes.- Volume Discount
Configure nowStarting from∗ ： 181.78 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 Pieces Per Package】
MISUMI
[Features]
-Multi-use tap for all materials from general steel, heat treated steel to stainless steel
-Efficient chip removal due to short thread form and special flute shape.- Volume Discount
Configure nowStarting from∗ ： 74.06 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
MT Series High-Speed Steel Spiral Tap
MISUMI
[New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping.
[Slide Discount] Great deals are available on the purchase of more than 5 pieces.- Volume Discount
Configure nowStarting from∗ ： 12.31 € Special price Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Taflet for Steel TFST
NACHI(FUJIKOSHI)
Suitable for thread rolling of mild steel, stainless steel below 20HRC of hardness.Configure nowStarting from∗ ： 22.36 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 25.27 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 20.39 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, for Stainless Steel (Compatible with Water-Soluble Cutting Oil) CC-SUS-SFT
OSG
Allows internal threading of stainless steel with a water soluble cutting fluid.
Tool material: Vanadium high speed steel
Hole type: For blind holes
Material: General steel/stainless steel.- Volume Discount
Configure nowStarting from∗ ： 20.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
Spiral Tap Series, Short Chamfer Type, EX-SC-SFT
OSG
Bite length is 1.5 threads per inch. For Blind Holes Where it Can't Secure an Effective Screw Length With a Standard Spiral Tap with 2.5 Threads Per Inch- Volume Discount
Configure nowStarting from∗ ： 11.69 € Special price Min. Shipping Days ： 8 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Screw Types |
| Screw size (Nominal) |
| Pitch (P), Number of Threading(mm) |
| Chamfer threads (Lcf) |
| Tool Material Type |
| work material |
| Tap Type |
| Hole type |
| Coating Y/N |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | YAMAWA MFG | YAMAWA MFG | SANDVIK | OSG | OSG | OSG | OSG | OSG | SANDVIK | MISUMI | OSG | OSG | OSG | YAMAWA MFG | SANDVIK | MISUMI | OSG | OSG | OSG | OSG | TANOI MFG | TANOI MFG | GUHRING | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | SANDVIK | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG |
| Product Series | Screw Cutting Round Die Series, General Round Dies for Screw Cutting, RD-S | SANDVIK CoroMill Plura Solid Carbide End Mill for Thread Milling | TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads | Spiral Tap Series, for Stainless Steel / Deep Holes SUS-DH-SFT | Point Tap Series, for Difficult-to-Machine Material, CPM-POT | TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads | Powdered High-Speed Steel Spiral Tap, Difficult-to-Cut Materials Supported【5 Pieces Per Package】 | Spiral Tap Series, for Stainless Steel (Compatible with Water-Soluble Cutting Oil) CC-SUS-SFT | |||||||||||||||||||||||||||||||||||||
| Starting from∗ | 39.34 € *Unit price with basic configuration | 10.61 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 20.16 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 21.26 € *Unit price with basic configuration Volume Discount | 20.42 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 35.68 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 12.45 € *Unit price with basic configuration Volume Discount | 9.81 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 130.94 € *Unit price with basic configuration | 173.31 € *Unit price with basic configuration | 69.71 € *Unit price with basic configuration | 19.86 € *Unit price with basic configuration Volume Discount | 20.16 € *Unit price with basic configuration Volume Discount | 10.31 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 18.62 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | - | 222.23 € *Unit price with basic configuration Volume Discount | 14.35 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 14.46 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 27.23 € *Unit price with basic configuration | 29.61 € *Unit price with basic configuration Volume Discount | 26.58 € *Unit price with basic configuration | 11.89 € *Unit price with basic configuration Volume Discount | 16.46 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 11.91 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 19.86 € *Unit price with basic configuration Volume Discount | 21.06 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 41.36 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 62.26 € *Unit price with basic configuration | 30.10 € *Unit price with basic configuration Volume Discount | 16.90 € *Unit price with basic configuration Volume Discount | 21.74 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 14.72 € *Unit price with basic configuration Volume Discount | 134.39 € *Unit price with basic configuration | 134.39 € *Unit price with basic configuration | 52.80 € *Unit price with basic configuration Volume Discount | 24.88 € *Unit price with basic configuration | 181.78 € *Unit price with basic configuration Volume Discount | 74.06 € *Unit price with basic configuration Volume Discount | 12.31 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 22.36 € *Unit price with basic configuration | 25.27 € *Unit price with basic configuration | 20.39 € *Unit price with basic configuration | 20.83 € *Unit price with basic configuration Volume Discount | 11.69 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount |
| Min. Shipping Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 8 Days | 6 Days | 5 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 5 Days | 7 Days | Same day | 6 Days | 6 Days | 7 Days | 5 Days | 5 Days | 6 Days | 6 Days | 15 Days | 6 Days | 6 Days | 6 Days | 24 Days | 8 Days | 6 Days | 8 Days | 8 Days | 8 Days | 9 Days | 5 Days | 7 Days | 5 Days | 5 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days |
| Specifications |
|
| |||||||||||||||||||||||||||||||||||||||||||
| Screw Types | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Unified | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter |
| Screw size (Nominal) | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 | M2.5 |
| Pitch (P), Number of Threading(mm) | 0.35 ～ 0.45 | 0.35 ～ 0.45 | 0.35 ～ 0.45 | 0.45 | 0.45 | 0.35 ～ 0.45 | 0.45 | 0.35 ～ 0.45 | 0.45 | - | 0.45 | 0.35 ～ 0.45 | 0.45 | 0.35 ～ 0.45 | 0.45 | - | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | - | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.35 ～ 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | - | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 | 0.45 |
| Chamfer threads (Lcf) | 2.5 | 2.5P | 2.5P | 2.5P | 2P ～ 4P | - | 2.5P | 1.5P ～ 5P | 5P | - | 1.5P ～ 3P | 5P | 2.5P | 5P | 2P ～ 4P | - | - | 2.5P | 5P | 2P ～ 4P | 2P | - | 5 P | 3P | 4P | 2P ～ 4P | 1P | 1P ～ 4P | 2P | - | 2.5P | 5P | 2.5P | 1.5P ～ 3P | 1.5P ～ 3P | - | - | - | 2.5 P | 2.5 P | 2P ～ 4P | 2P ～ 4P | 2P ～ 4P | 2.5P | 1.5P |
| Tool Material Type | Alloy HSS | Vanadium High-Speed Steel | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Alloy HSS | Vanadium High-Speed Steel | High-speed steel | Carbide | - | Carbide | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | - | Carbide | Vanadium High-Speed Steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | - | Cobalt HSS | Powder high-speed steel | Vanadium High-Speed Steel | Powder high-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Carbide | Carbide | High-speed steel | - | Carbide | Powder high-speed steel | Cobalt HSS | High-speed steel | High-speed steel | High-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel |
| work material | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | - | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | High Hardness Steel (50-60 HRC)[○] | - | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | - | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | - | Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Quenched and tempered steel (45 to 55 HRC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] | Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] | Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] |
| Tap Type | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Roll tap | Die | Spiral Tap | Hand Tap | Point tap | - | Hand Tap | Point tap | Spiral Tap | Point tap | Roll tap | - | Thread cutter | Spiral Tap | Point tap | Roll tap | Roll tap | - | Point tap | Spiral Tap | Point tap | Roll tap | Roll tap | Roll tap | Roll tap | Spiral Tap | Spiral Tap | Hand Tap | Spiral Tap | Hand Tap | Hand Tap | Die | - | Thread cutter | Spiral Tap | Spiral Tap | Roll tap | Roll tap | Roll tap | Spiral Tap | Spiral Tap |
| Hole type | For through hole / For blind hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | - | For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | For through hole / For blind hole | For through hole | For blind hole | For through hole | For blind hole | - | For through hole / For blind hole | For blind hole | For through hole | For blind hole | For through hole / For blind hole | - | For through hole | For blind hole | For through hole | For blind hole | For blind hole | - | - | For blind hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | - | For through hole / For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For blind hole |
| Coating Y/N | Available | N/A | Available | N/A | Available | N/A | N/A | N/A | Available | - | N/A | Available | Available | N/A | Available | - | Available | N/A | N/A | Available | Available | - | N/A | N/A | N/A | Available | Available | Available | Available | Available | N/A | N/A | N/A | N/A | N/A | N/A | - | Available | N/A | N/A | N/A | N/A | N/A | Available | N/A |
| Coating Type | TiCN | Non-Coated | Other | Non-Coated | TiCN | Non-Coated | Non-Coated | - | TiAlN | - | Non-Coated | Other | TiN | Non-Coated | TiN | - | TiAlN | Non-Coated | Non-Coated | TiCN | TiCN | - | Non-Coated | Non-Coated | Non-Coated | TiCN | TiCN | Other | TiCN | TiN | - | - | - | - | - | - | - | TiAlN | - | Non-Coated | - | - | - | TiN | Non-Coated |
| Overall Length (L)(mm) | - | 44 | 44 | 80 ～ 100 | 44 | - | 44 | 46 | 44 | 57 | 44 | 44 | 44 | 44 | 44 | 44.5 ～ 50 | 58 | 44 | 44 | 80 | 46 | 44.5 ～ 50 | 44 | 44 | 44 | 44 | 44 | 44 | 44 | 44 | 46 | 46 | 46 | 44 | 44 | - | 44.5 ～ 50 | 58 | 44 | 44 | 44 | 44 | 44 | 44 | 44 |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No0UN
- NO.0-80UNF
- No.0-80UNF
- No.10
- S0.1
- NO.1-72UNF
- No.1-72UNF
- NO.1-64UNC
- No.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12-32UNEF
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- No.4
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- No.6
- S0.6
- NO.6-40UNF
- No.6-40UNF
- No.6-32UNC
- S0.7
- No.8
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- S0.9
- 1"
- 1UN
- 1UNS
- G1
- G 1"
- M1
- NPS1
- NPT1
- NPTF1
- No1UN
- PF1
- PF 1
- PT 1
- R1
- Rp1
- S1
- UNC 1
- UNC 1"
- UNF 1"
- W1
- 1´-20UNEF
- 1´-14UNS
- 1'-12UNF
- 1´-12UNF
- 1´-11
- 1′-11
- 1-8UNC
- 1'-8UNC
- 1´-8UNC
- G1"-3"
- 1"1/2UN
- 1"1/2
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1´1/2-11
- 1′1/2-11
- 1 1/2-8UN
- 1"1/4UN
- 1"1/4
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1´1/4-11
- 1′1/4-11
- 1 1/4-8UN
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1 1/8-8UN
- 1´ 1/8-7UNC
- 1"1/16UN
- 1/2
- 1/2UN
- G1/2
- G 1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF 1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC 1/2
- UNF 1/2
- UNJF 1/2
- W1/2
- 1/2-28UNEF
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- G1/2 5/8
- 1/2W12
- 1 3/4
- 1"3/4UN
- G1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1′3/4-11
- 1 3/4-8UN
- 1 3/8
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- G1/4
- G 1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PS 1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC 1/4
- UNF 1/4
- UNJF 1/4
- W1/4
- 1/4-32UNEF
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4W20
- W1"5/8
- 1 5/8-8UN
- W1"7/8
- 1 7/8-8UN
- 1'W8
- 1/8
- G1/8
- G 1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8SM40
- 1/8SM44
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- 1/16-28
- 1/16SM80
- M1.1
- G 1.1/2
- G 1.1/4
- G 1.1/8
- M1.2
- S1.2
- M1.4
- S1.4
- M1.6
- M1.7
- M1.8
- 2"
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- No2UN
- R2
- Rp2
- UNC 2
- UNF 2
- W2
- 2´-11
- 2′-11
- 2-8UN
- G2"1/2
- R2"1/2
- Rp2"1/2
- 2′1/2-11
- W2"1/4
- M2.2
- M2.3
- M2.5
- M2.6
- 3M
- EGM 3
- G3
- M3
- M3.0
- No3UN
- R3
- Rp3
- STI M3
- UNC 3
- UNF 3
- 3′-11
- G3"1/2
- R3"1/2
- Rp3"1/2
- 3/4
- 3/4UN
- G3/4
- G 3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF 3/4
- R3/4
- Rp3/4
- UNC 3/4
- UNF 3/4
- W3/4
- 3/4-20UNEF
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- 3/8
- 3/8UN
- G3/8
- G 3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC 3/8
- UNF 3/8
- UNJF 3/8
- W3/8
- 3/8-32UNEF
- 3/8-24UNF
- 3/8-19
- 3/8-16UNC
- 3/8W16
- M3 - M10
- M3～10
- M3 - M12
- SM3/16
- W3/16
- 3/16SM24
- 3/16W24
- 3/16SM28
- 3/16SM32
- 3/16SM40
- M3 - M18
- SM3/32
- 3/32SM56
- 3/32SM100
- 3.5
- M3.5
- 4
- 4M
- EGM 4
- G4
- M4
- M4.0
- MF4
- No4UN
- R4
- Rp4
- STI M4
- UNC 4
- UNF 4
- №4-40UNC
- M4～6
- M4.5
- 5M
- EGM 5
- M5
- M5.0
- MF5
- No5UN
- STI M5
- UNC 5
- №5-40UNC
- 5/8
- 5/8UN
- G5/8
- G 5/8
- NPS5/8
- R5/8
- UNC 5/8
- UNF 5/8
- W5/8
- 5/8-24UNEF
- 5/8-18UNF
- 5/8-11UNC
- G5/8 3/4
- 5/8W11
- M5 - M12
- M5～13
- 5/16
- 5/16UN
- UNC 5/16
- UNF 5/16
- UNJF 5/16
- W5/16
- 5/16-32UNEF
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- W5/32
- 5/64SM64
- 5.5M
- M5.5
- 6
- EGM 6
- M6
- M6.0
- MF6
- No6UN
- STI M6
- UNC 6
- UNF 6
- UNJC 6
- No6-40UNF
- №6-32UNC
- M7
- MF7
- PG7
- 7 execution M3 - M12
- 7/8
- 7/8UN
- G7/8
- G 7/8
- NPS7/8
- R7/8
- UNC 7/8
- UNF 7/8
- W7/8
- 7/8-20UNEF
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- UNC 7/16
- UNF 7/16
- UNJF 7/16
- W7/16
- 7/16-28UNEF
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- SM7/32
- 7.5
- M7.5
- EGM 8
- M8
- MF8
- No8UN
- STI M8
- Tr8
- UNC 8
- UNF 8
- UNJC 8
- №8-32UNC
- 9
- M9
- PG9
- 9/16
- 9/16UN
- UNC 9/16
- UNF 9/16
- 9/16-18UNF
- 9/16-12UNC
- 9/16W12
- SM9/32
- SM9/64
- 9/64SM40
- M9.5
- EGM 10
- M10
- MF10
- No10UN
- STI M10
- Tr10
- Tr 10
- UNC10
- UNC 10
- UNF 10
- UNJF 10
- №10-32UNF
- №10-24UNC
- M10～25
- M11
- PG11
- SM11/32
- SM11/64
- 11/64SM40
- EGM 12
- M12
- MF12
- Mf12
- No12UN
- STI M12
- Tr12
- Tr 12
- UNC 12
- UNF 12
- M12 x 1.5
- M13
- PG13.5
- M14
- MF14
- Tr 14
- M15
- SM15/64
- 15/64SM28
- M16
- MF16
- Mf16
- PG16
- Tr16
- Tr 16
- M16 x 1.5
- M17
- M18
- MF18
- Tr18
- Tr 18
- M19
- M20
- MF20
- Mf20
- Tr 20
- M20 x 1.5
- M21
- PG21
- M22
- M22X
- MF22
- Tr 22
- M23
- M24
- M24X
- MF24
- Tr 24
- M25
- M25X
- MF25
- Mf25
- Tr 25
- M25 x 1.5
- M26
- MF26
- Tr 26
- M27
- MF27
- M28
- MF28
- Tr 28
- PG29
- M30
- MF30
- Tr 30
- M32
- Mf32
- M33
- M34
- M35
- M36
- PG36
- M37
- M38
- M39
- M40
- M42
- PG42
- M44
- M45
- M46
- M48
- M50
- M52
- M56
- M64
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Pitch (P), Number of Threading(mm)
-
Chamfer threads (Lcf)
-
Tool Material Type
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Tap Type
-
Hole type
-
Coating Y/N
-
Coating Type
-
Overall Length (L)(mm)
Brand
-
- OSG (31)
- YAMAWA MFG (22)
- NACHI(FUJIKOSHI) (5)
- SANDVIK (4)
- GUHRING (3)
- TANOI MFG (3)
- REX TOOLS (1)
- SKC (1)
- NS TOOL (0)
- BERNSTEIN AG (0)
- KANETEC (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- STAHLWILLE (0)
- H & H (0)
- RUKO (0)
- WALTER PROTOTYP (0)
- BAHCO (0)
- ENGINEER (0)
- LIGHTSEIKI (0)
- CARMEX (0)
- HAZET (0)
- TRUSCO NAKAYAMA (0)
- WERA (0)
- WIHA (0)
- FEIN (0)
- EIKOSHA (0)
- ISHIHASHI (0)
- RENNSTEIG (0)
- GEDORE (0)
- ESCO (0)
- NOGAJAPAN (0)
CAD data type
-
- 2D
- 3D
Categories related to Screw-Hole-Related Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
Metoda płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.