Screw-Hole-Related Tools（Screw Types：Unified）
Search by sub-category
Hand Taps
Spiral Taps
Point Taps
Roll Taps
Taps for Pipes
Thread Cutters
Thread-Cutting-Related Tools
Dies
Tap Wrenches
Modification/Removal Tools
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Promotional pricing ends 30/11/2024
Spiral Tap Series, General Purpose EX-SFT
OSG
Suited for drilling blind holes in materials that leave coil shaped connected cutting debris such as carbon steel, alloyed steel, and non-ferrous metals.- Volume Discount
- Stock
Configure nowStarting from∗ ： 9.91 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Point Tap Series, for General, EX-POT
OSG
Suited for materials that leave coil shaped connected cutting dust that is in general use such as carbon steel, alloyed steel, and non-ferrous metals. Reliably Pushes Cutting Debris Forward Removing Concerns of Debris Interference- Volume Discount
Configure nowStarting from∗ ： 9.61 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
A Tap Series for Pipes Point Tap A-POT
OSG
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.- Volume Discount
Configure nowStarting from∗ ： 19.29 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
A Tap Series, Spiral Tap, A-SFT
OSG
Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.- Volume Discount
Configure nowStarting from∗ ： 19.52 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Hand Tap HT (Cutting Tap)
YAMAWA MFG
Hand tap used for general tapping work.
[Features]
・ High blade tip strength makes it easy for regrinding.
・ More suitable for manual work compared to taps of other shapes.
・ 2 types are available, with 5P or 1.5P chamfered threads.
・ When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.
・ Machining with mechanical machinery is also possible.
・ Has straight grooves out of consideration for cutting chip stow.
・ Suitable for work materials whose cutting chips are powder or small coiled close to the powder.
[Applications]
・ Ideal for threading SPC/SPH and other thin plates or SS400/S20 or below mild steel.- Volume Discount
- Stock
Configure nowStarting from∗ ： 8.38 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Configure nowStarting from∗ ： 41.28 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Spiral Tap Series, for Stainless EX-SUS-SFT
OSG
Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.- Volume Discount
Configure nowStarting from∗ ： 10.88 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Point Tap Series For Stainless Steel Use EX-SUS-POT
OSG
Offers superb sharpness and durability. Can be used to drill holes in difficult-to-cut stainless steel.- Volume Discount
Configure nowStarting from∗ ： 10.64 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Groove-Free Tap Series, Tin Coated, TIN-NRT
OSG
Suitable for both steel and non-ferrous alloys. Capable of high-speed cutting and efficient tapping; offer drastically improved durability.- Volume Discount
Configure nowStarting from∗ ： 22.03 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Hand Tap Series, for General, HT
OSG
High speed steel hand tap.
Working material: magnesium alloy casting (MC) compatible / zinc alloy casting (ZDC) compatible.- Volume Discount
Configure nowStarting from∗ ： 9.25 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Planet Cutter Series NC-Planet Cutters WX-PNC
OSG
Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.- Volume Discount
Configure nowStarting from∗ ： 158.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Min. Shipping Days ： 5 Days -
High Performance Roll Tap HP+ RZ / HP-RZ
YAMAWA MFG
It is suitable for processing steel materials (35 HRC or less) and light alloys, and can support high-speed machining (20-50 m/min)- Volume Discount
Configure nowStarting from∗ ： 24.43 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Min. Shipping Days ： 5 Days -
Configure now
Min. Shipping Days ： 5 Days -
Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC
OSG
The planet cutter is able to mill M1 - M5 small diameter female screws. Ideal for Preventing Defects in High Value Added Manufactured Articles and for Tapping without a Pilot Hole Margin- Volume Discount
Configure nowStarting from∗ ： 139.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Groove-Free Tap Series VP New Roll Short Chamfer VP-SC-NRT
OSG
Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.- Volume Discount
Configure nowStarting from∗ ： 24.73 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Groove-Free Tap Series VP New Roll Long Shank VP-LT-NRT
OSG
Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.Configure nowStarting from∗ ： 31.24 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Spiral Tap for Stainless Steel SU+SP / SU-SP
YAMAWA MFG
Spiral tap for blind hole machining with extremely viscous or work-hardened work material.
[Features]
· For blind hole machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.
· Optimal design of the screw part reduces the machining burden on each blade bite, reducing the cutting resistance and increasing tool life.
· Stable scrap is ejected and a good finish is realized.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 10 m/min or less is recommended.
[Applications]
Optimal for machining extremely viscous or work-hardened work material.- Volume Discount
Configure nowStarting from∗ ： 17.55 € Special price Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Point Tap PO(N-PO)
YAMAWA MFG
A point tap convenient for through-hole machining as scraps are ejected forward.
[Features]
· Slanting the groove on the cutting edge of the biting part pushes the scraps forward.
· Minimal scrap issues.
· Low cutting torque.
· Capable of machining both synchronously and asynchronously.
[Applications]
· Ideal for machining through-holes.
* N-PO models will transition to PO as soon as stock runs out.- Volume Discount
Configure nowStarting from∗ ： 15.26 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Carbide Hand Tap for Cast Iron N-CT FC
YAMAWA MFG
A carbide tap suitable for thread machining of hard and brittle material such as cast iron.Configure nowStarting from∗ ： 108.87 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Configure now
Min. Shipping Days ： 5 Days -
Insert Screw Tap Series, Hand Tap HL-HT
OSG
Used for female thread tapping in insertion of helical coil. Compared to ordinary taps of average size, the pitch is the same but outer diameter in just the inserting part is made larger.- Volume Discount
Configure nowStarting from∗ ： 12.11 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Insert Screw Tap Series, Hand Tap, Long Shank, HL-LT
OSG
Used for female thread tapping in insertion of helical coil. Compared to ordinary taps of average size, the pitch is the same but outer diameter in just the inserting part is made larger.- Volume Discount
Configure nowStarting from∗ ： 22.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Point Tap Series, General Long Shank, EX-LT
OSG
Long shank type.
Tool material: vanadium high-speed steel
Working material: general steel / cast iron / aluminium / copper.- Volume Discount
Configure nowStarting from∗ ： 31.54 € Special price Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Groove-Free Tap Series IT New Roll IT-NRT
OSG
Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.- Volume Discount
Configure nowStarting from∗ ： 24.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Groove-Free Tap Series VP New Roll VP-NRT
OSG
Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.- Volume Discount
Configure nowStarting from∗ ： 23.13 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Groove-Free Tap Series For Non-Ferrous Alloy B-HRT
OSG
Suitable for nonferrous alloys such as aluminum, magnesium, zinc, copper and it's alloys.- Volume Discount
Configure nowStarting from∗ ： 15.30 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Configure nowStarting from∗ ： 8.60 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Adjustable Solid Die_for Unified Screws UNC
SKC
A female tool that's used to cut male threads- Volume Discount
Configure nowStarting from∗ ： 20.03 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Configure nowStarting from∗ ： 20.03 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Stainless Steel Point Tap SU+PO / SU-PO
YAMAWA MFG
Point tap for through-hole machining with extremely viscous or work-hardened work material.
[Features]
Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 10 m/min or less is recommended.
[Applications]
· Ideal for machining through-holes with chrome steel, molybdenum steel, and stainless steel.- Volume Discount
Configure nowStarting from∗ ： 17.55 € Special price Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Dry Processing Roll Tap OL+RZ / OL-RZ
YAMAWA MFG
It is a roll tap that's capable of tapping without lubrication for burred thin iron plates and steel with relatively short processing length at the size of M6 or less.- Volume Discount
Configure nowStarting from∗ ： 30.14 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Long Shank Spiral Tap LS-SP(LS-N-SP)
YAMAWA MFG
* LS-N-SP will switch to LS-SP as soon as the stock runs out.- Volume Discount
Configure nowStarting from∗ ： 23.68 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Pilot Hole Check Pins for Cutting (Straight Type) CPC-S
YAMAWA MFG
5-piece set that can be used to check several types of pilot holes and pilot hole depth. High-speed tool steel is used out of consideration for abrasion resistance. Can be used for both through-holes and blind-holes.- Volume Discount
Configure nowStarting from∗ ： 32.28 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread Unified Screw (UN)
CARMEX
For internal threading.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 229.39 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid Mill Thread with Oil Hole UN
CARMEX
For unified screws and inner diameter screws.
[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.Configure nowStarting from∗ ： 273.20 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
For Large Diameter Unified Screw Type Q for UN Inner Diameter Unified Screw
CARMEX
For internally threaded unified screws.
[Features]
· For thread cutting deep, large diameter holes.
· With neck thinly processed and an oil hole, it is suitable for screw-cutting deep holes of medium to thick diameters.
· Stable processing without causing chatter is possible.
· Deep hole drilling can be performed with one pass.
· Blade length is shorter, so cutting resistance decreases.
· Able to thread long blade lengths of up to 3DConfigure nowStarting from∗ ： 349.53 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Solid for Outer Diameter, Mill Thread UN
CARMEX
For unified screws and outer diameter screws.
[Features]
· The spiral blade enables a clean finish.
· Machining time is reduced by using three to six flutesConfigure nowStarting from∗ ： 349.53 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
DMT 3in1 UN Internal Diameter Unified Thread 60° with Internal Lubrication Hole
CARMEX
With internal coolant hole, up to screw depth D1 x 2.
[Features]
· 3 functions with one tool. (drilling + threading + chamfering).
· Thanks to the circular arc helical machining, thread cutting, chamfering and drilling are completed in one step.
· Drilling tools are not required.
· High-performance tools shorten the cycle time and reduce the machining costs.
· Can be used for both blind holes and through holes.
· Because one tool can be used for drilling, threading, and chamfering, less time is spent replacing tools.
· Thread processing with finished blade can be performed.
· Both right-handed and left-handed threads can be processed with the same tool.Configure nowStarting from∗ ： 304.42 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Hard Cut UN
CARMEX
[Features]
· This new tool meets the needs of the mold industry.
· High-speed cutting enabled.
· Shortens the machining time.
· The blade length is short, so cutting load is not applied.
· Can be used to cut the effective thread up to the edge of blind holes.Configure nowStarting from∗ ： 218.26 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing ends 30/11/2024
Solid Die D for Unified Threads (Fine)
YAMAWA MFG
[Features]
· Solid die with improved die runout precision. · High-speed tool steel (HSS) is adopted, realizing stable machining.
[Applications]
· Work material: Iron, light metals.
· For male thread machining.- Volume Discount
Configure nowStarting from∗ ： 56.94 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Solid Die D for Unified Threads (Coarse)
YAMAWA MFG
[Features]
· Solid die with improved die runout precision. · High-speed tool steel (HSS) is adopted, realizing stable machining.
[Applications]
· Work material: Iron, light metals.
· For male thread machining.- Volume Discount
Configure nowStarting from∗ ： 60.61 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Thread Cutting Tool (for Unified Threads) MMTU
NS TOOL
[Features]
・ Adopts a blade shape with an emphasis on sharpness, improving machining precision.
・ Adopts MUGEN Coating Premium for the realization of a long life.
・ For Unified Standard threadsConfigure nowStarting from∗ ： 108.22 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SU Roll Tap SURZ
YAMAWA MFG
[Features]
· A special shape is adopted for the base of the tap pits that enables the female thread internal diameter shape to be controlled.
· The part of the tap that sticks out (protrudes) adopts a special shape that realizes low torque.
· Demonstrates effectiveness for roll tap machining of stainless steel.
· Adjusting the pilot hole diameter enables the female thread internal diameter shape to be adjusted.- Volume Discount
Configure nowStarting from∗ ： 39.88 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Screw Types |
| Screw size (Nominal) |
| Pitch (P), Number of Threading(mm) |
| Chamfer threads (Lcf) |
| Tool Material Type |
| work material |
| Tap Type |
| Hole type |
| Coating Y/N |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | YAMAWA MFG | OSG | OSG | OSG | OSG | OSG | OSG | SANDVIK | YAMAWA MFG | SANDVIK | SANDVIK | OSG | OSG | OSG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | SANDVIK | OSG | OSG | OSG | OSG | OSG | OSG | SKC | SKC | SKC | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | YAMAWA MFG | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | CARMEX | YAMAWA MFG | YAMAWA MFG | NS TOOL | YAMAWA MFG |
| Product Series | Screw Cutting Round Die Series, General Round Dies for Screw Cutting, RD-S | Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC | For Large Diameter Unified Screw Type Q for UN Inner Diameter Unified Screw | DMT 3in1 UN Internal Diameter Unified Thread 60° with Internal Lubrication Hole | |||||||||||||||||||||||||||||||||||||||||
| Starting from∗ | 9.91 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 9.61 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 19.29 € *Unit price with basic configuration Volume Discount | 19.52 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 8.38 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 41.28 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 10.88 € *Unit price with basic configuration Volume Discount | 10.64 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 22.03 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 9.25 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 158.30 € *Unit price with basic configuration Volume Discount | - | 24.43 € *Unit price with basic configuration Volume Discount | - | - | 139.70 € *Unit price with basic configuration Volume Discount | 24.73 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 31.24 € *Unit price with basic configuration | 17.55 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 15.26 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 108.87 € *Unit price with basic configuration | - | 12.11 € *Unit price with basic configuration Volume Discount | 22.83 € *Unit price with basic configuration | 31.54 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 24.73 € *Unit price with basic configuration Volume Discount | 23.13 € *Unit price with basic configuration Volume Discount | 15.30 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 8.60 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 | 20.03 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 | 20.03 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024 | 17.55 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 30.14 € *Unit price with basic configuration Volume Discount | 23.68 € *Unit price with basic configuration Volume Discount | 32.28 € *Unit price with basic configuration Volume Discount | 229.39 € *Unit price with basic configuration | 273.20 € *Unit price with basic configuration | 349.53 € *Unit price with basic configuration | 349.53 € *Unit price with basic configuration | 304.42 € *Unit price with basic configuration | 218.26 € *Unit price with basic configuration | 56.94 € Special price *Unit price with basic configuration Promotional pricing ends 30/11/2024Volume Discount | 60.61 € *Unit price with basic configuration | 108.22 € *Unit price with basic configuration | 39.88 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 5 Days | 6 Days | 5 Days | 5 Days | 6 Days | 6 Days | 6 Days | 8 Days | Same day | 7 Days | 5 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | Same day | Same day | Same day | Same day | 8 Days | 8 Days | 8 Days | 8 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | Same day | 6 Days | 6 Days | 8 Days |
| Specifications |
|
| |||||||||||||||||||||||||||||||||||||||||||
| Screw Types | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified | Unified |
| Screw size (Nominal) | 1UN ～ No12UN | No0UN ～ No12UN | 1/2-20UNF ～ №10-24UNC | 1-8UNC ～ №10-24UNC | No.0-80UNF ～ 9/16-12UNC | 1UN ～ No12UN | 1UN ～ No10UN | 1UN ～ No10UN | No0UN ～ No12UN | No0UN ～ No12UN | - | UNC 1" ～ UNC 12 | No.10-32UNF ～ M20 | UNC 1" ～ UNF 12 | UNC 1" ～ UNF 12 | - | No2UN ～ No6UN | No2UN ～ No6UN | No.10-32UNF ～ 7/16-14UNC | No.10-32UNF ～ 3/8-24UNF | No.10-32UNF ～ 7/16-14UNC | UNC 1/2 ～ UNF 7/16 | No8UN | No6UN | 3/8UN | No2UN ～ No4UN | No2UN ～ No6UN | No2UN | No0UN ～ No12UN | 5/16UN | 3/8UN ～ 7/16UN | No.10-32UNF ～ 9/16-18UNF | No.10-32UNF ～ 1/4-20UNC | 1'-8UNC ～ 7/16-14UNC | No.10 ～ 7/16 | - | - | - | - | - | - | No.10 | No.6 | NO.0-80UNF ～ 1/4-20UNC | No.2 ～ No.6 |
| Pitch (P), Number of Threading(mm) | 5 ～ 48 | 6 ～ 80 | - | - | 5 ～ 7 | 4.5 ～ 64 | 8 ～ 48 | 8 ～ 48 | 20 ～ 80 | 12 ～ 80 | 12 ～ 28 | - | 0.25 ～ 1.75 | - | - | 32 | 32 ～ 56 | 32 ～ 56 | - | - | - | - | 32 | 32 | 16 | 40 ～ 56 | 32 ～ 56 | 56 | 28 ～ 80 | 18 | 20 ～ 24 | - | - | - | 56 ～ 64 | - | - | - | - | - | - | 32 | 32 | - | 56 |
| Chamfer threads (Lcf) | 2.5P | 5P | 5P | 2.5P | 1.5P ～ 5P | - | 2.5P | 4P | 2P ～ 4P | 1.5P ～ 9P | - | - | 2P ～ 4P | - | - | - | 1P | 2P ～ 4P | 2.5P | 5P | 1.5P ～ 3P | - | 5P | 1.5P | 5P | 2P | 2P ～ 4P | 2.5P | 1.5P ～ 5P | - | - | 5P | 4P | 2.5P | - | - | - | - | - | - | - | - | - | - | 2P |
| Tool Material Type | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | Powder high-speed steel / Vanadium High-Speed Steel | High-speed steel | Alloy HSS | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-speed steel | Carbide | - | Powder high-speed steel | - | - | Carbide | Powder high-speed steel | Powder high-speed steel | High-speed steel | High-speed steel | Carbide | - | High-speed steel | High-speed steel | Vanadium High-Speed Steel | Powder high-speed steel | Powder high-speed steel | High-speed steel | - | - | - | - | Powder high-speed steel | High-speed steel | High-speed steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | High-speed steel | High-speed steel | Carbide | Powder high-speed steel |
| work material | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | - | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Quenched and tempered steel (45 to 55 HRC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] | - | Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[◎] | Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[◎] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Quenched and tempered steel (45 to 55 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Tool Steel (Before SKD Hardening)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | - | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Copper (Cu)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] |
| Tap Type | Spiral Tap | Point tap | Point tap | Spiral Tap | Hand Tap | Die | Spiral Tap | Point tap | Roll tap | Hand Tap | Thread cutter | - | Roll tap | - | - | Thread cutter | Roll tap | Roll tap | Spiral Tap | Point tap | Hand Tap | - | Hand Tap | Hand Tap | Hand Tap | Roll tap | Roll tap | Roll tap | Hand Tap | Die | Die | Point tap | Roll tap | Spiral Tap | Thread-Cutting-Related Tool | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Die | Die | Thread cutter | Roll tap |
| Hole type | For blind hole | For through hole | For through hole | For blind hole | For through hole / For blind hole | - | For blind hole | For through hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | - | For through hole / For blind hole | - | - | For through hole / For blind hole | For blind hole | For blind hole | For blind hole | For through hole | For through hole / For blind hole | - | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For blind hole | For blind hole | - | - | - | For through hole | For through hole | For blind hole | For through hole / For blind hole | For blind hole | For blind hole | For through hole / For blind hole | - | For through hole / For blind hole | For blind hole | - | - | For blind hole | For blind hole |
| Coating Y/N | N/A | N/A | Available | Available | N/A | N/A | N/A | N/A | Available | N/A | Available | - | Available | - | - | Available | Available | Available | N/A | N/A | N/A | - | N/A | N/A | N/A | Available | Available | N/A | - | - | - | N/A | Available | N/A | N/A | Available | Available | Available | Available | Available | Available | N/A | N/A | Available | Available |
| Coating Type | Non-Coated | Non-Coated | Other | Other | - | Non-Coated | Non-Coated | Non-Coated | TiN | Non-Coated | TiAlN | - | TiCN | - | - | Other | TiCN | TiCN | - | - | - | - | Non-Coated | Non-Coated | Non-Coated | TiCN | TiCN | Non-Coated | - | - | - | - | TiCN | - | - | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | - | - | TiAlN | Other |
| Overall Length (L)(mm) | 44 ～ 175 | 36 ～ 160 | 44 ～ 115 | 44 ～ 225 | 36 ～ 180 | - | 44 ～ 125 | 44 ～ 125 | 36 ～ 62 | 36 ～ 105 | 60 ～ 110 | 47.625 ～ 160 | 36 ～ 105 | 44.5 ～ 160 | 45 ～ 160 | 40 | 42 ～ 48 | 80 | 42 ～ 125 | 60 ～ 75 | 44 ～ 105 | 66 ～ 140 | 60 | 100 | 150 | 42 ～ 44 | 42 ～ 48 | 42 | - | - | - | 42 ～ 95 | 42 ～ 62 | 100 ～ 200 | 41.5 ～ 121 | 58 ～ 105 | 64 ～ 105 | 73 ～ 105 | 73 ～ 84 | 64 | 39 ～ 84 | - | - | 45 | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
-
Screw size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No0UN
- NO.0-80UNF
- No.0-80UNF
- No.10
- S0.1
- NO.1-72UNF
- No.1-72UNF
- NO.1-64UNC
- No.1-64UNC
- NO.10-32UNF
- No.10-32UNF
- NO.10-24UNC
- No.10-24UNC
- No.12
- No.12-32UNEF
- NO.12-28UNF
- No.12-28UNF
- NO.12-24UNC
- No.12-24UNC
- No.2
- S0.2
- NO.2-64UNF
- No.2-64UNF
- NO.2-56UNC
- No.2-56UNC
- No.3
- S0.3
- NO.3-56UNF
- No.3-56UNF
- NO.3-48UNC
- No.3-48UNC
- No.4
- S0.4
- NO.4-48UNF
- No.4-48UNF
- NO.4-40UNC
- No.4-40UNC
- No.5
- S0.5
- NO.5-44UNF
- No.5-44UNF
- NO.5-40UNC
- No.5-40UNC
- No.6
- S0.6
- NO.6-40UNF
- No.6-40UNF
- No.6-32UNC
- S0.7
- No.8
- S0.8
- NO.8-36UNF
- No.8-36UNF
- NO.8-32UNC
- No.8-32UNC
- S0.9
- 1"
- 1UN
- 1UNS
- G1
- G 1"
- M1
- NPS1
- NPT1
- NPTF1
- No1UN
- PF1
- PF 1
- PT 1
- R1
- Rp1
- S1
- UNC 1
- UNC 1"
- UNF 1"
- W1
- 1´-20UNEF
- 1´-14UNS
- 1'-12UNF
- 1´-12UNF
- 1´-11
- 1′-11
- 1-8UNC
- 1'-8UNC
- 1´-8UNC
- G1"-3"
- 1"1/2UN
- 1"1/2
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- R1"1/2
- Rp1"1/2
- W1"1/2
- 1´1/2-11
- 1′1/2-11
- 1 1/2-8UN
- 1"1/4UN
- 1"1/4
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- R1"1/4
- Rp1"1/4
- W1"1/4
- 1´1/4-11
- 1′1/4-11
- 1 1/4-8UN
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1 1/8-8UN
- 1´ 1/8-7UNC
- 1"1/16UN
- 1/2
- 1/2UN
- G1/2
- G 1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- PF 1/2
- PT 1/2
- R1/2
- Rc1/2
- Rp1/2
- UNC 1/2
- UNF 1/2
- UNJF 1/2
- W1/2
- 1/2-28UNEF
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- G1/2 5/8
- 1/2W12
- 1 3/4
- 1"3/4UN
- G1"3/4
- R1"3/4
- Rp1"3/4
- W1"3/4
- 1′3/4-11
- 1 3/4-8UN
- 1 3/8
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- G1/4
- G 1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- PF1/4
- PF 1/4
- PS 1/4
- PT 1/4
- R1/4
- Rc1/4
- Rp1/4
- SM1/4
- UNC 1/4
- UNF 1/4
- UNJF 1/4
- W1/4
- 1/4-32UNEF
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4W20
- W1"5/8
- 1 5/8-8UN
- W1"7/8
- 1 7/8-8UN
- 1'W8
- 1/8
- G1/8
- G 1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- PF1/8
- PF 1/8
- PT 1/8
- R1/8
- Rc1/8
- Rp1/8
- SM1/8
- W1/8
- 1/8-28
- 1/8SM40
- 1/8SM44
- 1/16
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- Rp1/16
- 1/16-28
- 1/16SM80
- M1.1
- G 1.1/2
- G 1.1/4
- G 1.1/8
- M1.2
- S1.2
- M1.4
- S1.4
- M1.6
- M1.7
- M1.8
- 2"
- 2UN
- G2
- M2
- M2.0
- NPS2
- NPT2
- No2UN
- R2
- Rp2
- UNC 2
- UNF 2
- W2
- 2´-11
- 2′-11
- 2-8UN
- G2"1/2
- R2"1/2
- Rp2"1/2
- 2′1/2-11
- W2"1/4
- M2.2
- M2.3
- M2.5
- M2.6
- 3M
- EGM 3
- G3
- M3
- M3.0
- No3UN
- R3
- Rp3
- STI M3
- UNC 3
- UNF 3
- 3′-11
- G3"1/2
- R3"1/2
- Rp3"1/2
- 3/4
- 3/4UN
- G3/4
- G 3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- PF 3/4
- R3/4
- Rp3/4
- UNC 3/4
- UNF 3/4
- W3/4
- 3/4-20UNEF
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- 3/8
- 3/8UN
- G3/8
- G 3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- PF 3/8
- PT 3/8
- R3/8
- Rc3/8
- Rp3/8
- UNC 3/8
- UNF 3/8
- UNJF 3/8
- W3/8
- 3/8-32UNEF
- 3/8-24UNF
- 3/8-19
- 3/8-16UNC
- 3/8W16
- M3 - M10
- M3～10
- M3 - M12
- SM3/16
- W3/16
- 3/16SM24
- 3/16W24
- 3/16SM28
- 3/16SM32
- 3/16SM40
- M3 - M18
- SM3/32
- 3/32SM56
- 3/32SM100
- 3.5
- M3.5
- 4
- 4M
- EGM 4
- G4
- M4
- M4.0
- MF4
- No4UN
- R4
- Rp4
- STI M4
- UNC 4
- UNF 4
- №4-40UNC
- M4～6
- M4.5
- 5M
- EGM 5
- M5
- M5.0
- MF5
- No5UN
- STI M5
- UNC 5
- №5-40UNC
- 5/8
- 5/8UN
- G5/8
- G 5/8
- NPS5/8
- R5/8
- UNC 5/8
- UNF 5/8
- W5/8
- 5/8-24UNEF
- 5/8-18UNF
- 5/8-11UNC
- G5/8 3/4
- 5/8W11
- M5 - M12
- M5～13
- 5/16
- 5/16UN
- UNC 5/16
- UNF 5/16
- UNJF 5/16
- W5/16
- 5/16-32UNEF
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- W5/32
- 5/64SM64
- 5.5M
- M5.5
- 6
- EGM 6
- M6
- M6.0
- MF6
- No6UN
- STI M6
- UNC 6
- UNF 6
- UNJC 6
- No6-40UNF
- №6-32UNC
- M7
- MF7
- PG7
- 7 execution M3 - M12
- 7/8
- 7/8UN
- G7/8
- G 7/8
- NPS7/8
- R7/8
- UNC 7/8
- UNF 7/8
- W7/8
- 7/8-20UNEF
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16
- 7/16UN
- UNC 7/16
- UNF 7/16
- UNJF 7/16
- W7/16
- 7/16-28UNEF
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- SM7/32
- 7.5
- M7.5
- EGM 8
- M8
- MF8
- No8UN
- STI M8
- Tr8
- UNC 8
- UNF 8
- UNJC 8
- №8-32UNC
- 9
- M9
- PG9
- 9/16
- 9/16UN
- UNC 9/16
- UNF 9/16
- 9/16-18UNF
- 9/16-12UNC
- 9/16W12
- SM9/32
- SM9/64
- 9/64SM40
- M9.5
- EGM 10
- M10
- MF10
- No10UN
- STI M10
- Tr10
- Tr 10
- UNC10
- UNC 10
- UNF 10
- UNJF 10
- №10-32UNF
- №10-24UNC
- M10～25
- M11
- PG11
- SM11/32
- SM11/64
- 11/64SM40
- EGM 12
- M12
- MF12
- Mf12
- No12UN
- STI M12
- Tr12
- Tr 12
- UNC 12
- UNF 12
- M12 x 1.5
- M13
- PG13.5
- M14
- MF14
- Tr 14
- M15
- SM15/64
- 15/64SM28
- M16
- MF16
- Mf16
- PG16
- Tr16
- Tr 16
- M16 x 1.5
- M17
- M18
- MF18
- Tr18
- Tr 18
- M19
- M20
- MF20
- Mf20
- Tr 20
- M20 x 1.5
- M21
- PG21
- M22
- M22X
- MF22
- Tr 22
- M23
- M24
- M24X
- MF24
- Tr 24
- M25
- M25X
- MF25
- Mf25
- Tr 25
- M25 x 1.5
- M26
- MF26
- Tr 26
- M27
- MF27
- M28
- MF28
- Tr 28
- PG29
- M30
- MF30
- Tr 30
- M32
- Mf32
- M33
- M34
- M35
- M36
- PG36
- M37
- M38
- M39
- M40
- M42
- PG42
- M44
- M45
- M46
- M48
- M50
- M52
- M56
- M64
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Pitch (P), Number of Threading(mm)
-
Chamfer threads (Lcf)
-
Tool Material Type
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Tap Type
-
Hole type
-
Coating Y/N
-
Coating Type
-
Overall Length (L)(mm)
Brand
-
- MISUMI (0)
- OSG (19)
- YAMAWA MFG (15)
- CARMEX (6)
- SANDVIK (5)
- SKC (3)
- NS TOOL (1)
- NACHI(FUJIKOSHI) (0)
- BERNSTEIN AG (0)
- KANETEC (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- STAHLWILLE (0)
- H & H (0)
- RUKO (0)
- WALTER PROTOTYP (0)
- BAHCO (0)
- ENGINEER (0)
- LIGHTSEIKI (0)
- HAZET (0)
- TRUSCO NAKAYAMA (0)
- WERA (0)
- WIHA (0)
- FEIN (0)
- EIKOSHA (0)
- TANOI MFG (0)
- ISHIHASHI (0)
- RENNSTEIG (0)
- GEDORE (0)
- ESCO (0)
- GUHRING (0)
- REX TOOLS (0)
- NOGAJAPAN (0)
CAD data type
-
- 2D
- 3D
Categories related to Screw-Hole-Related Tools
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
Metoda płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.